josh at chamas
Apr 4, 2004, 11:14 PM
Post #2 of 2
(1799 views)
Permalink
|
paulokutwak wrote:
> I try yet to install and run the asp with Apache. I installed
> everything, but when I send message to bring data from asp file,
> nothing is shown. Is returned this:
> Internal Server Error
> The server encountered an internal error or misconfiguration and was
> unable to complete your request.
>
> Please contact the server administrator, @@ServerAdmin@@ and inform
> them of the time the error occurred, and anything you might have done
> that may have caused the error.
>
> More information about this error may be available in the server error
> log.
>
What is in the server error log when this happens?
--Josh
> By example, I tryed this:
> <html>
> <head>
> <title>Apache::ASP Test</title>
> </head>
>
> <body>
> For loop incrementing font size: <p>
> <% for(1..5) { %>
> <!-- iterated html text -->
> <font size="<%=$_%>" > Size = <%=$_%> </font> <br>
> <% } %>
> </body>
> </html>
> But the loop doesn't executed.
> I made like the manual said using the nmake to build and install the
> programs.
> I send again my httpd.conf
> ServerRoot "C:/Perl/Apache2"
> Timeout 300
> KeepAlive On
> MaxKeepAliveRequests 100
> KeepAliveTimeout 15
> Listen 80
> #
> # Based upon the NCSA server configuration files originally by Rob
> McCool.
> #
> # This is the main Apache server configuration file. It contains the
> # configuration directives that give the server its instructions.
> # See <URL:http://httpd.apache.org/docs-2.0/> for detailed information
> about
> # the directives.
> #
> # Do NOT simply read the instructions in here without understanding
> # what they do. They're here only as hints or reminders. If you are
> unsure
> # consult the online docs. You have been warned.
> #
> # The configuration directives are grouped into three basic sections:
> # 1. Directives that control the operation of the Apache server
> process as a
> # whole (the 'global environment').
> # 2. Directives that define the parameters of the 'main' or 'default'
> server,
> # which responds to requests that aren't handled by a virtual host.
> # These directives also provide default values for the settings
> # of all virtual hosts.
> # 3. Settings for virtual hosts, which allow Web requests to be sent
> to
> # different IP addresses or hostnames and have them handled by the
> # same Apache server process.
> #
> # Configuration and logfile names: If the filenames you specify for
> many
> # of the server's control files begin with "/" (or "drive:/" for
> Win32), the
> # server will use that explicit path. If the filenames do *not* begin
> # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
> # with ServerRoot set to "@@ServerRoot@@" will be interpreted by the
> # server as "@@ServerRoot@@/logs/foo.log".
> #
> # NOTE: Where filenames are specified, you must use forward slashes
> # instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
> # If a drive letter is omitted, the drive on which Apache.exe is
> located
> # will be used by default. It is recommended that you always supply
> # an explicit drive letter in absolute paths, however, to avoid
> # confusion.
> #
> # Section 1: Global Environment
> #
> # The directives in this section affect the overall operation of
> Apache,
> # such as the number of concurrent requests it can handle or where it
> # can find its configuration files.
> #
> #
> # ServerRoot: The top of the directory tree under which the server's
> # configuration, error, and log files are kept.
> #
> # NOTE! If you intend to place this on an NFS (or otherwise network)
> # mounted filesystem then please read the LockFile documentation
> (available
> # at <URL:http://httpd.apache.org/docs-2.0/mod/mpm_common.
> html#lockfile>);
> # you will save yourself a lot of trouble.
> #
> # Do NOT add a slash at the end of the directory path.
> #
> #
> # ScoreBoardFile: File used to store internal server process
> information.
> # If unspecified (the default), the scoreboard will be stored in an
> # anonymous shared memory segment, and will be unavailable to
> third-party
> # applications.
> # If specified, ensure that no two invocations of Apache share the
> same
> # scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK.
> # ScoreBoardFile "logs/apache_runtime_status"
> #
> # PidFile: The file in which the server should record its process
> # identification number when it starts.
> PidFile logs/httpd.pid
> #
> # Timeout: The number of seconds before receives and sends time out.
> #
> #
> # KeepAlive: Whether or not to allow persistent connections (more than
> # one request per connection). Set to "Off" to deactivate.
> #
> #
> # MaxKeepAliveRequests: The maximum number of requests to allow
> # during a persistent connection. Set to 0 to allow an unlimited
> amount.
> # We recommend you leave this number high, for maximum performance.
> #
> #
> # KeepAliveTimeout: Number of seconds to wait for the next request
> from the
> # same client on the same connection.
> #
> #
> # Listen: Allows you to bind Apache to specific IP addresses and/or
> # ports, instead of the default. See also the <VirtualHost>
> # directive.
> #
> # Change this to Listen on specific IP addresses as shown below to
> # prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
> # Listen 12.34.56.78:80
> # for php
> # A test page is found at http://localhost/hello.php
> LoadFile "C:/WINDOWS/system/php4ts.dll"
> # this is for ssl
> LoadFile "C:/Perl/Apache2/bin/libeay32.dll"
> LoadFile "C:/Perl/Apache2/bin/ssleay32.dll"
> #for mod_perl
> LoadFile "C:/Perl/Perl/bin/perl58.dll"
> #
> # Control access to UserDir directories. The following is an example
> # for a site where these directories are restricted to read-only.
> #
> # You must correct the path for the root to match your system's
> configured
> # user directory location, e.g. "D:/WinNT/profiles/*/My Documents/My
> Website"
> # ServerTokens
> # This directive configures what you return as the Server HTTP
> response
> # Header. The default is 'Full' which sends information about the
> OS-Type
> # and compiled in modules.
> # Set to one of: Full | OS | Minor | Minimal | Major | Prod
> # where Full conveys the most information, and Prod the least.
> ServerTokens Full
> #
> # Note that if you include a trailing / on fakename then the server
> will
> # require it to be present in the URL. So "/icons" isn't aliased in
> this
> # ForceLanguagePriority allows you to serve a result page rather than
> # MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE
> (Fallback)
> # [in case no accepted languages matched the available variants]
> ForceLanguagePriority Prefer Fallback
> # Allow from server status reports generated by mod_status,
> # Allow from remote server configuration reports, with the URL of
> # Section 3: Virtual Hosts
> #
> # VirtualHost: If you want to maintain multiple domains/hostnames on
> your
> # machine you can setup VirtualHost containers for them. Most
> configurations
> # use only name-based virtual hosts so the server doesn't need to
> worry about
> # IP addresses. This is indicated by the asterisks in the directives
> below.
> #
> # Please see the documentation at
> # URL:http://httpd.apache.org/docs-2.0/vhosts/
> # for further details before you try to setup virtual hosts.
> #
> # You may use the command line option '-S' to verify your virtual host
> # configuration.
> #
> # Use name-based virtual hosting.
> # NameVirtualHost *
> # NameVirtualHost *:80
> # a hello-world handler
> #PerlModule Apache::Hello
> # Apache::ASP pages
> PerlModule Apache::ASP
> # HTML::Mason pages
> PerlModule HTML::Mason::ApacheHandler2
> # Template::Toolkit
> PerlLoadModule Apache::Template
> PerlModule Apache::MyTTHandler
> TT2ServiceModule Apache::MyTTHandler
> TT2EvalPerl On
> TT2IncludePath "C:/Perl/Apache2/template"
> TT2PostChomp On
> TT2PreProcess header.html
> TT2PostProcess footer.html
> #
> # Dynamic Shared Object (DSO) Support
> #
> # To be able to use the functionality of a module which was built as a
> DSO you
> # have to place corresponding `LoadModule' lines at this location so
> the
> # directives contained in it are actually available _before_ they are
> used.
> # Statically compiled modules (those listed by `httpd -l') do not need
> # to be loaded here.
> #
> # Example:
> # LoadModule foo_module "modules/mod_foo.so"
> LoadModule access_module "C:/Perl/Apache2/modules/mod_access.so"
> LoadModule actions_module "C:/Perl/Apache2/modules/mod_actions.so"
> LoadModule alias_module "C:/Perl/Apache2/modules/mod_alias.so"
> LoadModule asis_module "C:/Perl/Apache2/modules/mod_asis.so"
> LoadModule auth_module "C:/Perl/Apache2/modules/mod_auth.so"
> # LoadModule auth_anon_module "modules/mod_auth_anon.so"
> # LoadModule auth_dbm_module "modules/mod_auth_dbm.so"
> # LoadModule auth_digest_module "modules/mod_auth_digest.so"
> LoadModule autoindex_module "C:/Perl/Apache2/modules/mod_autoindex.so"
> # LoadModule cern_meta_module "modules/mod_cern_meta.so"
> LoadModule cgi_module "C:/Perl/Apache2/modules/mod_cgi.so"
> # LoadModule dav_module "modules/mod_dav.so"
> # LoadModule dav_fs_module "modules/mod_dav_fs.so"
> LoadModule dir_module "C:/Perl/Apache2/modules/mod_dir.so"
> LoadModule env_module "C:/Perl/Apache2/modules/mod_env.so"
> # LoadModule expires_module "modules/mod_expires.so"
> # LoadModule file_cache_module "modules/mod_file_cache.so"
> # LoadModule headers_module "modules/mod_headers.so"
> LoadModule imap_module "C:/Perl/Apache2/modules/mod_imap.so"
> LoadModule include_module "C:/Perl/Apache2/modules/mod_include.so"
> # LoadModule info_module "modules/mod_info.so"
> LoadModule isapi_module "C:/Perl/Apache2/modules/mod_isapi.so"
> LoadModule log_config_module "C:/Perl/Apache2/modules/mod_log_config.
> so"
> LoadModule mime_module "C:/Perl/Apache2/modules/mod_mime.so"
> # LoadModule mime_magic_module "modules/mod_mime_magic.so"
> # LoadModule proxy_module "modules/mod_proxy.so"
> # LoadModule proxy_connect_module "modules/mod_proxy_connect.so"
> # LoadModule proxy_http_module "modules/mod_proxy_http.so"
> # LoadModule proxy_ftp_module "modules/mod_proxy_ftp.so"
> LoadModule negotiation_module "C:
> /Perl/Apache2/modules/mod_negotiation.so"
> # LoadModule rewrite_module "modules/mod_rewrite.so"
> LoadModule setenvif_module "C:/Perl/Apache2/modules/mod_setenvif.so"
> # LoadModule speling_module "modules/mod_speling.so"
> # LoadModule status_module "modules/mod_status.so"
> # LoadModule unique_id_module "modules/mod_unique_id.so"
> LoadModule userdir_module "C:/Perl/Apache2/modules/mod_userdir.so"
> # LoadModule usertrack_module "modules/mod_usertrack.so"
> # LoadModule vhost_alias_module "modules/mod_vhost_alias.so"
> LoadModule php4_module "C:/Perl/Apache2/modules/php4apache2.dll"
> LoadModule ssl_module "C:/Perl/Apache2/modules/mod_ssl.so"
> # LoadModule apreq_module "C:/Perl/Apache2/modules/mod_apreq.so"
> LoadModule perl_module "C:/Perl/Apache2/modules/mod_perl.so"
> # ExtendedStatus controls whether Apache will generate "full" status
> # information (ExtendedStatus On) or just basic information
> (ExtendedStatus
> # Off) when the "server-status" handler is called. The default is Off.
> # ExtendedStatus On
> ServerName localhost:80
> ServerAdmin @@ServerAdmin@@
> DocumentRoot "D:/"
> UserDir "My Documents/My Website"
> DirectoryIndex index.html index.html.var
> DefaultType text/plain
> ErrorLog "logs/error.log"
> LogLevel warn
> DefaultIcon "icons/unknown.gif"
> AddDefaultCharset UTF-8
> LanguagePriority en da nl et fr de el it ja ko no pl pt pt-br ltz ca
> es sv tw
> AddType application/x-httpd-php .php
> # Section 2: 'Main' server configuration
> #
> # The directives in this section set up the values used by the 'main'
> # server, which responds to any requests that aren't handled by a
> # <VirtualHost> definition. These values also provide defaults for
> # any <VirtualHost> containers you may define later in the file.
> #
> # All of these directives may appear inside <VirtualHost> containers,
> # in which case these default settings will be overridden for the
> # virtual host being defined.
> #
> #
> # ServerAdmin: Your address, where problems with the server should be
> # e-mailed. This address appears on some server-generated pages, such
> # as error documents. e.g. admin [at] your-domain
> #
> # ServerName gives the name and port that the server uses to identify
> itself.
> # This can often be determined automatically, but we recommend you
> specify
> # it explicitly to prevent problems during startup.
> #
> # If this is not set to valid DNS name for your host, server-generated
> # redirections will not work. See also the UseCanonicalName
> directive.
> #
> # If your host doesn't have a registered DNS name, enter its IP
> address here.
> # You will have to access it by its address anyway, and this will make
> # redirections work in a sensible way.
> #
> #
> # UseCanonicalName: Determines how Apache constructs self-referencing
> # URLs and the SERVER_NAME and SERVER_PORT variables.
> # When set "Off", Apache will use the Hostname and Port supplied
> # by the client. When set "On", Apache will use the value of the
> # ServerName directive.
> UseCanonicalName Off
> #
> # DocumentRoot: The directory out of which you will serve your
> # documents. By default, all requests are taken from this directory,
> but
> # symbolic links and aliases may be used to point to other locations.
> #
> #
> # UserDir: The name of the directory that is appended onto a user's
> home
> # directory if a ~user request is received. Be especially careful to
> use
> # proper, forward slashes here. On Windows NT, "Personal/My Website"
> # is a more appropriate choice.
> #
> #
> # DirectoryIndex: sets the file that Apache will serve if a directory
> # is requested.
> #
> # The index.html.var file (a type-map) is used to deliver content-
> # negotiated documents. The MultiViews Option can be used for the
> # same purpose, but it is much slower.
> #
> #
> # AccessFileName: The name of the file to look for in each directory
> # for additional configuration directives. See also the AllowOverride
> # directive.
> AccessFileName ".htaccess"
> #
> # The following lines prevent .htaccess and .htpasswd files from being
> # viewed by Web clients.
> <Files "~ ^\.ht">
> Order allow,deny
> Deny from all
> </Files>
> # TypesConfig "describes where the mime.types file (or equivalent) is"
> # to be found.
> TypesConfig "conf/mime.types"
> # DefaultType is the default MIME type the server will use for a
> document
> # if it cannot otherwise determine one, such as from filename
> extensions.
> # If your server contains mostly text or HTML documents, "text/plain"
> is
> # a good value. If most of your content is binary, such as
> applications
> # or images, you may want to use "application/octet-stream" instead to
> # keep browsers from trying to display binary files as though they are
> # text.
> #
> #
> # HostnameLookups: Log the names of clients or just their IP addresses
> # e.g., www.apache.org (on) or 204.62.129.132 (off).
> # The default is off because it'd be overall better for the net if
> people
> # had to knowingly turn this feature on, since enabling it means that
> # each client request will result in AT LEAST one lookup request to
> the
> # nameserver.
> HostnameLookups Off
> #
> # EnableMMAP: Control whether memory-mapping is used to deliver
> # files (assuming that the underlying OS supports it).
> # The default is on; turn this off if you serve from NFS-mounted
> # filesystems. On some systems, turning it off (regardless of
> # filesystem) can improve performance; for details, please see
> # http://httpd.apache.org/docs-2.0/mod/core.html#enablemmap
> #
> # EnableMMAP off
> #
> # EnableSendfile: Control whether the sendfile kernel support is
> # used to deliver files (assuming that the OS supports it).
> # The default is on; turn this off if you serve from NFS-mounted
> # filesystems. Please see
> # http://httpd.apache.org/docs-2.0/mod/core.html#enablesendfile
> #
> # EnableSendfile off
> #
> # ErrorLog: The location of the error log file.
> # If you do not specify an ErrorLog directive within a <VirtualHost>
> # container, error messages relating to that virtual host will be
> # logged here. If you *do* define an error logfile for a
> <VirtualHost>
> # container, that host's errors will be logged there and not here.
> #
> #
> # LogLevel: Control the number of messages logged to the error.log.
> # Possible values include: debug, info, notice, warn, error, crit,
> # alert, emerg.
> #
> #
> # The following directives define some format nicknames for use with
> # a CustomLog directive (see below).
> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}
> i\"" combined
> LogFormat "%h %l %u %t \"%r\" %>s %b" common
> LogFormat "%{Referer}i -> %U" referer
> LogFormat "%{User-agent}i" agent
> # You need to enable mod_logio.c to use %I and %O
> # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}
> i\" %I %O" combinedio
> #
> # The location and format of the access logfile (Common Logfile
> Format).
> # If you do not define any access logfiles within a <VirtualHost>
> # container, they will be logged here. Contrariwise, if you *do*
> # define per-<VirtualHost> access logfiles, transactions will be
> # logged therein and *not* in this file.
> CustomLog logs/access.log common
> #
> # If you would like to have agent and referer logfiles, uncomment the
> # following directives.
> # CustomLog logs/referer.log referer
> # CustomLog logs/agent.log agent
> #
> # If you prefer a single logfile with access, agent, and referer
> information
> # (Combined Logfile Format) you can use the following directive.
> # CustomLog logs/access.log combined
> #
> # Optionally add a line containing the server version and virtual host
> # name to server-generated pages (internal error documents, FTP
> directory
> # listings, mod_status and mod_info output etc., but not CGI generated
> # documents or custom error documents).
> # Set to "EMail" to also include a mailto: link to the ServerAdmin.
> # Set to one of: On | Off | EMail
> ServerSignature On
> # Redirect allows you to tell clients about documents which used to
> exist in
> # your server's namespace, but do not anymore. This allows you to tell
> the
> # clients where to look for the relocated document.
> # Example:
> # Redirect permanent /foo http://www.example.com/bar
> #
> # Directives controlling the display of server-generated directory
> listings.
> #
> #
> # IndexOptions: Controls the appearance of server-generated directory
> # listings.
> IndexOptions FancyIndexing VersionSort
> #
> # AddIcon* directives tell the server which icon to show for different
> # files or filename extensions. These are only displayed for
> # FancyIndexed directories.
> #
> # DefaultIcon "is which icon to show for files which do not have an
> icon"
> # explicitly set.
> #
> # AddDescription allows you to place a short description after a file
> in
> # server-generated indexes. These are only displayed for FancyIndexed
> # directories.
> # Format: AddDescription "description" filename
> # AddDescription "GZIP compressed document" .gz
> # AddDescription "tar archive" .tar
> # AddDescription "GZIP compressed tar archive" .tgz
> # ReadmeName "is the name of the README file the server will look for
> by"
> # default, and append to directory listings.
> # HeaderName "is the name of a file which should be prepended to"
> # directory indexes.
> ReadmeName "README.html"
> HeaderName "HEADER.html"
> # IndexIgnore is a set of filenames which directory indexing should
> ignore
> # and not include in the listing. Shell-style wildcarding is
> permitted.
> IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
> # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+)
> uncompress
> # information on the fly. Note: Not all browsers support this.
> # Despite the name similarity, the following Add* directives have
> nothing
> # to do with the FancyIndexing customization directives above.
> AddEncoding x-compress Z
> AddEncoding x-gzip gz tgz
> # DefaultLanguage and AddLanguage allows you to specify the language
> of
> # a document. You can then use content negotiation to give a browser a
> # file in a language the user can understand.
> #
> # Specify a default language. This means that all data
> # going out without a specific language tag (see below) will
> # be marked with this one. You probably do NOT want to set
> # this unless you are sure it is correct for all cases.
> #
> # * It is generally better to not mark a page as
> # * being a certain language than marking it with the wrong
> # * language!
> # DefaultLanguage nl
> #
> # Note 1: The suffix does not have to be the same as the language
> # keyword --- those with documents in Polish (whose net-standard
> # language code is pl) may wish to use "AddLanguage pl .po" to
> # avoid the ambiguity with the common suffix for perl scripts.
> #
> # Note 2: The example entries below illustrate that in some cases
> # the two character 'Language' abbreviation is not identical to
> # the two character 'Country' code for its country,
> # E.g. 'Danmark/dk' versus 'Danish/da'.
> #
> # Note 3: In the case of 'ltz' we violate the RFC by using a three
> char
> # specifier. There is 'work in progress' to fix this and get
> # the reference data for rfc1766 cleaned up.
> #
> # Danish (da) - Dutch (nl) - English (en) - Estonian (et)
> # French (fr) - German (de) - Greek-Modern (el)
> # Italian (it) - Norwegian (no) - Norwegian Nynorsk (nn) - Korean (ko)
> # Portugese (pt) - Luxembourgeois* (ltz)
> # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
> # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
> # Russian (ru) - Croatian (hr)
> #
> # LanguagePriority allows you to give precedence to some languages
> # in case of a tie during content negotiation.
> #
> # Just list the languages in decreasing order of preference. We have
> # more or less alphabetized them here. You probably want to change
> this.
> #
> #
> # Specify a default charset for all pages sent out. This is
> # always a good idea and opens the door for future
> internationalisation
> # of your web site, should you ever want it. Specifying it as
> # a default does little harm; as the standard dictates that a page
> # is in iso-8859-1 (latin1) unless specified otherwise i.e. you
> # are merely stating the obvious. There are also some security
> # reasons in browsers, related to javascript and URL parsing
> # which encourage you to always set a default char set.
> # AddDefaultCharset ISO-8859-1
> #
> # Commonly used filename extensions to character sets. You probably
> # want to avoid clashes with the language extensions, unless you
> # are good at carefully testing your setup after each change.
> # See ftp://ftp.isi.edu/in-notes/iana/assignments/character-sets for
> # the official list of charset names and their respective RFCs
> #
> # For russian, more than one charset is used (depends on client,
> mostly):
> # The set below does not map to a specific (iso) standard
> # but works on a fairly wide range of browsers. Note that
> # capitalization actually matters (it should not, but it
> # does for some browsers).
> #
> # See ftp://ftp.isi.edu/in-notes/iana/assignments/character-sets
> # for a list of sorts. But browsers support few.
> #
> # AddType allows you to add to or override the MIME configuration
> # file mime.types for specific file types.
> AddType application/x-tar .tgz
> AddType image/x-icon .ico
> # AddHandler allows you to map certain file extensions to "handlers":
> # actions unrelated to filetype. These can be either built into the
> server
> # or added with the Action directive (see below)
> #
> # To use CGI scripts outside of ScriptAliased directories:
> # (You will also need to add "ExecCGI" to the "Options" directive.)
> # AddHandler cgi-script .cgi
> #
> # For files that include their own HTTP headers:
> # AddHandler send-as-is asis
> #
> # For server-parsed imagemap files:
> # AddHandler imap-file map
> #
> # For type maps (negotiated resources):
> # (This is enabled by default to allow the Apache "It Worked" page
> # to be distributed in multiple languages.)
> AddHandler type-map var
> #
> # Filters allow you to process content before it is sent to the
> client.
> #
> # To parse .shtml files for server-side includes (SSI):
> # (You will also need to add "Includes" to the "Options" directive.)
> # AddType text/html .shtml
> # AddOutputFilter INCLUDES .shtml
> # Action lets you define media types that will execute a script
> whenever
> #
> # The following directives modify normal HTTP response behavior to
> # handle known problems with browser implementations.
> BrowserMatch "Mozilla/2" nokeepalive
> BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0
> force-response-1.0
> BrowserMatch "RealPlayer 4\.0" force-response-1.0
> BrowserMatch "Java/1\.0" force-response-1.0
> BrowserMatch "JDK/1\.0" force-response-1.0
> #
> # The following directive disables redirects on non-GET requests for
> # a directory that does not include the trailing slash. This fixes a
> # problem with Microsoft WebFolders which does not appropriately
> handle
> # redirects for folders with DAV methods.
> # Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
> BrowserMatch "Microsoft Data Access Internet Publishing Provider"
> redirect-carefully
> BrowserMatch "^WebDrive" redirect-carefully
> BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully
> BrowserMatch "^gnome-vfs" redirect-carefully
> # with the URL of http://servername/server-status
> # Change the ".@@DomainName@@" to match your domain to enable.
> # <Location /server-status>
> # SetHandler server-status
> # Order deny,allow
> # Deny from all
> # Allow from .@@DomainName@@
> # </Location>
> # http://servername/server-info (requires that mod_info.c be loaded).
> # Change the ".@@DomainName@@" to match your domain to enable.
> # <Location /server-info>
> # SetHandler server-info
> # Order deny,allow
> # Deny from all
> # Allow from .@@DomainName@@
> # </Location>
> <Location /perl>
> SetHandler perl-script
> PerlResponseHandler ModPerl::Registry
> Options +ExecCGI
> PerlOptions +ParseHeaders
> </Location>
> <Location /hello>
> SetHandler modperl
> PerlResponseHandler Apache::Hello
> </Location>
> <Location /asp>
> SetHandler perl-script
> PerlResponseHandler Apache::ASP
> PerlSetVar Global .
> PerlSetVar StateDir "C:/Perl/Apache2/asp/state"
> </Location>
> <Location /template>
> SetHandler perl-script
> PerlResponseHandler Apache::Template
> </Location>
> AddIcon "/icons/binary.gif" .bin .exe
> AddIcon "/icons/binhex.gif" .hqx
> AddIcon "/icons/tar.gif" .tar
> AddIcon "/icons/world2.gif" .wrl .wrl.gz .vrml .vrm .iv
> AddIcon "/icons/compressed.gif" .Z .z .tgz .gz .zip
> AddIcon "/icons/a.gif" .ps .ai .eps
> AddIcon "/icons/layout.gif" .html .shtml .htm .pdf
> AddIcon "/icons/text.gif" .txt
> AddIcon "/icons/c.gif" .c
> AddIcon "/icons/p.gif" .pl .py
> AddIcon "/icons/f.gif" .for
> AddIcon "/icons/dvi.gif" .dvi
> AddIcon "/icons/uuencoded.gif" .uu
> AddIcon "/icons/script.gif" .conf .sh .shar .csh .ksh .tcl
> AddIcon "/icons/tex.gif" .tex
> AddIcon "/icons/bomb.gif" core
> AddIcon "/icons/back.gif" ..
> AddIcon "/icons/hand.right.gif" README
> AddIcon "/icons/folder.gif" ^^DIRECTORY^^
> AddIcon "/icons/blank.gif" ^^BLANKICON^^
> AddIconByType "(TXT,/icons/text.gif)" text/*
> AddIconByType "(IMG,/icons/image2.gif)" image/*
> AddIconByType "(SND,/icons/sound2.gif)" audio/*
> AddIconByType "(VID,/icons/movie.gif)" video/*
> AddIconByEncoding "(CMP,/icons/compressed.gif)" x-compress x-gzip
> #
> # Aliases: Add here as many aliases as you need (with no limit). The
> format is
> # Alias fakename "realname"
> # example, only "/icons/". If the fakename is slash-terminated, then
> the
> # realname must also be slash terminated, and if the fakename omits
> the
> # trailing slash, the realname must also omit it.
> #
> # We include the /icons/ alias for FancyIndexed directory listings.
> If you
> # do not use FancyIndexing, you may comment this out.
> Alias /icons/ "D:/Apache2/icons/"
> #
> # This should be changed to the ServerRoot/manual/. The alias
> provides
> # the manual, even if you choose to move your DocumentRoot. You may
> comment
> # this out if you do not care for the documentation.
> # Alias /manual "D:/Apache2/manual"
> # mod_perl manual and related docs
> Alias /modperl/ "D:/Apache2/modperl/"
> #
> #
> # Putting this all together, we can internationalize error responses.
> #
> # We use Alias to redirect any /error/HTTP_<error>.html.var response
> to
> # our collection of by-error message multi-language collections. We
> use
> # includes to substitute the appropriate text.
> #
> # You can modify the messages' appearance without changing any of the
> # default HTTP_<error>.html.var files by adding the line:
> # Alias /error/include/ "/your/include/path/"
> #
> # which allows you to create your own set of files by starting with
> the
> # @exp_errordir@/include/ files and copying them to
> /your/include/path/,
> # even on a per-VirtualHost basis. The default include files will
> display
> # your Apache version number and your ServerAdmin email address
> regardless
> # of the setting of ServerSignature.
> #
> # The internationalized error documents require mod_alias, mod_include
> # and mod_negotiation. To activate them, uncomment the following 30
> lines.
> # Alias /error/ "@exp_errordir@/"
> # for ModPerl::Registry scripts
> Alias /perl/ "C:/Perl/Apache2/perl/"
> Alias /asp/ "C:/Perl/Apache2/asp/"
> Alias /mason/ "C:/Perl/Apache2/mason/"
> Alias /template/ "C:/Perl/Apache2/template/"
> AliasMatch ^/manual(?:/(?:de|en|fr|ja|ko|ru))?(/.*)?$ "D:
> /Apache2/manual$1"
> #
> # ScriptAlias: This controls which directories contain server scripts.
> # ScriptAliases are essentially the same as Aliases, except that
> # documents in the realname directory are treated as applications and
> # run by the server when requested rather than as documents sent to
> the client.
> # The same rules about trailing "/" apply to ScriptAlias directives as
> to
> # Alias.
> ScriptAlias /cgi-bin/ "D:/Apache2/cgi-bin/"
> AddLanguage da .dk
> AddLanguage nl .nl
> AddLanguage en .en
> AddLanguage et .et
> AddLanguage fr .fr
> AddLanguage de .de
> AddLanguage he .he
> AddLanguage el .el
> AddLanguage it .it
> AddLanguage ja .ja
> AddLanguage pl .po
> AddLanguage ko .ko
> AddLanguage pt .pt
> AddLanguage nn .nn
> AddLanguage no .no
> AddLanguage pt-br .pt-br
> AddLanguage ltz .ltz
> AddLanguage ca .ca
> AddLanguage es .es
> AddLanguage sv .se
> AddLanguage cz .cz
> AddLanguage ru .ru
> AddLanguage tw .tw
> AddLanguage zh-tw .tw
> AddLanguage hr .hr
> AddCharset ISO-8859-1 .iso8859-1 .latin1
> AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen
> AddCharset ISO-8859-3 .iso8859-3 .latin3
> AddCharset ISO-8859-4 .iso8859-4 .latin4
> AddCharset ISO-8859-5 .iso8859-5 .latin5 .cyr .iso-ru
> AddCharset ISO-8859-6 .iso8859-6 .latin6 .arb
> AddCharset ISO-8859-7 .iso8859-7 .latin7 .grk
> AddCharset ISO-8859-8 .iso8859-8 .latin8 .heb
> AddCharset ISO-8859-9 .iso8859-9 .latin9 .trk
> AddCharset ISO-2022-JP .iso2022-jp .jis
> AddCharset ISO-2022-KR .iso2022-kr .kis
> AddCharset ISO-2022-CN .iso2022-cn .cis
> AddCharset Big5 .Big5 .big5
> AddCharset WINDOWS-1251 .cp-1251 .win-1251
> AddCharset CP866 .cp866
> AddCharset KOI8-r .koi8-r .koi8-ru
> AddCharset KOI8-ru .koi8-uk .ua
> AddCharset ISO-10646-UCS-2 .ucs2
> AddCharset ISO-10646-UCS-4 .ucs4
> AddCharset UTF-8 .utf8
> AddCharset GB2312 .gb2312 .gb
> AddCharset utf-7 .utf7
> AddCharset utf-8 .utf8
> AddCharset big5 .big5 .b5
> AddCharset EUC-TW .euc-tw
> AddCharset EUC-JP .euc-jp
> AddCharset EUC-KR .euc-kr
> AddCharset shift_jis .sjis
> # a matching file is called. This eliminates the need for repeated URL
> # pathnames for oft-used CGI file processors.
> # Format: Action media/type /cgi-script/location
> # Format: Action handler-name /cgi-script/location
> #
> #
> # Customizable error responses come in three flavors:
> # 1) plain text 2) local redirects 3) external redirects
> #
> # Some examples:
> # ErrorDocument 500 "The server made a boo boo."
> # ErrorDocument 404 /missing.html
> # ErrorDocument 404 "/cgi-bin/missing_handler.pl"
> # ErrorDocument 402 http://www.example.com/subscription_info.html
> # ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
> # ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
> # ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
> # ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
> # ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
> # ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
> # ErrorDocument 410 /error/HTTP_GONE.html.var
> # ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
> # ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
> # ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
> # ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
> # ErrorDocument 415 /error/HTTP_SERVICE_UNAVAILABLE.html.var
> # ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
> # ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
> # ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
> # ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
> # ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
> <Directory "/">
> AllowOverride None
> Options FollowSymLinks
> #
> # Each directory to which Apache has access can be configured with
> respect
> # to which services and features are allowed and/or disabled in that
> # directory (and its subdirectories).
> #
> # First, we configure the "default" to be a very restrictive set of
> # features.
> </Directory>
> <Directory "D:/">
> AllowOverride None
> Options Indexes FollowSymLinks
> Order allow,deny
> Allow from all
> #
> # Note that from this point forward you must specifically allow
> # particular features to be enabled - so if something's not working
> as
> # you might expect, make sure that you have specifically enabled it
> # below.
> #
> #
> # This should be changed to whatever you set DocumentRoot to.
> #
> #
> # Possible values for the Options directive are "None", "All",
> # or any combination of:
> # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI
> MultiViews
> #
> # Note that "MultiViews" must be named *explicitly* --- "Options
> All"
> # doesn't give it to you.
> #
> # The Options directive is both complicated and important. Please
> see
> # http://httpd.apache.org/docs-2.0/mod/core.html#options
> # for more information.
> #
> #
> # AllowOverride controls what directives may be placed in .htaccess
> files.
> # It can be "All", "None", or any combination of the keywords:
> # Options FileInfo AuthConfig Limit
> #
> #
> # Controls who can get stuff from this server.
> </Directory>
> # <Directory "D:/Documents and Settings/*/My Documents/My Website">
> # AllowOverride FileInfo AuthConfig Limit
> # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
> # or whichever, as appropriate.
> # <Limit GET POST OPTIONS PROPFIND>
> # Order allow,deny
> # Allow from all
> # </Limit>
> # <LimitExcept GET POST OPTIONS PROPFIND>
> # Order deny,allow
> # Deny from all
> # </LimitExcept>
> # </Directory>
> <Directory "c:/Perl/Apache2/icons">
> AllowOverride None
> Options Indexes MultiViews
> Order allow,deny
> Allow from all
> </Directory>
> <Directory "c:/Perl/Apache2/manual">
> AllowOverride None
> Options Indexes
> Order allow,deny
> Allow from all
> <Files "*.html">
> SetHandler type-map
> </Files>
> SetEnvIf Request_URI ^/manual/de/ prefer-language=de
> SetEnvIf Request_URI ^/manual/en/ prefer-language=en
> SetEnvIf Request_URI ^/manual/fr/ prefer-language=fr
> SetEnvIf Request_URI ^/manual/ja/ prefer-language=ja
> SetEnvIf Request_URI ^/manual/ko/ prefer-language=ko
> SetEnvIf Request_URI ^/manual/ru/ prefer-language=ru
> RedirectMatch 301 ^/manual(?:/(de|en|fr|ja|ko|ru)){2,}(/.*)?$
> /manual/$1$2
> </Directory>
> <Directory "c:/Perl/Apache2/modperl">
> AllowOverride None
> Options Indexes FollowSymLinks MultiViews IncludesNoExec
> Order allow,deny
> Allow from all
> </Directory>
> <Directory "c:/Perl/Apache2/cgi-bin">
> AllowOverride None
> Options None
> Order allow,deny
> Allow from all
> #
> # "@@ServerRoot@@/cgi-bin" should be changed to whatever your
> ScriptAliased
> # CGI directory exists, if you have that configured.
> </Directory>
> # <Directory "@exp_errordir@">
> # AllowOverride None
> # Options IncludesNoExec
> # Order allow,deny
> # Allow from all
> # AddOutputFilter Includes html
> # AddHandler type-map var
> # LanguagePriority en de es fr it nl sv
> # ForceLanguagePriority Prefer Fallback
> # </Directory>
> <Directory "C:/Perl/Apache2/mason">
> # PerlSetVar MasonArgsMethod CGI
> PerlSetVar MasonDataDir "C:/Perl/Apache2/mason/data"
> PerlSetVar MasonCompRoot "C:/Perl/Apache2/mason"
> SetHandler perl-script
> PerlResponseHandler HTML::Mason::ApacheHandler2
> PerlOptions +GlobalRequest
> </Directory>
> # <VirtualHost *>
> # ServerName dummy-host.example.com
> # ServerAdmin webmaster [at] dummy-host
> # DocumentRoot "/www/docs/dummy-host.example.com"
> # ErrorLog "logs/dummy-host.example.com-error_log"
> #
> # VirtualHost example:
> # Almost any Apache directive may go into a VirtualHost container.
> # The first VirtualHost section is used for requests without a known
> # server name.
> # CustomLog logs/dummy-host.example.com-access_log common
> # </VirtualHost>
> # <VirtualHost *:80>
> # ServerName localhost:80
> # ServerAdmin admin@
> # DocumentRoot "D:/Apache2/htdocs"
> # PerlOptions +Parent
> # PerlSwitches -wT
> # </VirtualHost>
> <IfModule mpm_winnt.c>
> #
> # Server-Pool Size Regulation (MPM specific)
> #
> # WinNT MPM
> # ThreadsPerChild: constant number of worker threads in the server
> process
> # MaxRequestsPerChild: maximum number of requests a server process
> serves
> ThreadsPerChild 250
> MaxRequestsPerChild 0
> </IfModule>
> <IfModule mod_mime_magic.c>
> #
> # The mod_mime_magic module allows the server to use various hints
> from the
> # contents of the file itself to determine its type. The
> MIMEMagicFile
> # directive tells the module where the hint definitions are located.
> MIMEMagicFile "C:/Perl/Apache2/conf/magic"
> </IfModule>
> # <IfModule mod_proxy.c>
> #
> # Proxy Server directives. Uncomment the following lines to
> # enable the proxy server:
> # ProxyRequests On
> # <Proxy *>
> # Order deny,allow
> # Deny from all
> # Allow from .example.com
> # </Proxy>
> #
> # Enable/disable the handling of HTTP/1.1 "Via:" headers.
> # ("Full" adds the server version; "Block" removes all outgoing Via:
> headers)
> # Set to one of: Off | On | Full | Block
> # ProxyVia On
> #
> # To enable the cache as well, edit and uncomment the following
> lines:
> # (no cacheing without CacheRoot)
> # CacheRoot "@@ServerRoot@@/proxy"
> # CacheSize 5
> # CacheGcInterval 4
> # CacheMaxExpire 24
> # CacheLastModifiedFactor 0.1
> # CacheDefaultExpire 1
> # NoCache a-domain.com another-domain.edu joes.garage-sale.com
> # </IfModule>
> <IfModule mod_ssl.c>
> # End of proxy directives.
> #
> # Bring in additional module-specific configurations
> Include "C:/Perl/Apache2/conf/ssl.conf"
> </IfModule>
> <IfModule mod_perl.c>
> Include "C:/Perl/Apache2/conf/perl.conf"
> </IfModule>
> PerlRequire "C:/Perl/Apache2/conf/startup.pl"
> # for ModPerl::Registry scripts
> Alias /perl/ "C:/Perl/Apache2/perl/"
> <Location /perl>
> SetHandler perl-script
> PerlResponseHandler ModPerl::Registry
> Options +ExecCGI
> PerlOptions +ParseHeaders
> </Location>
> # a hello-world handler
> PerlModule Apache::Hello
> <Location /hello>
> SetHandler modperl
> PerlResponseHandler Apache::Hello
> </Location>
> # Apache::ASP pages
> #PerlModule Apache::ASP
> Alias /asp/ "C:/Perl/Apache2/asp/"
> <Location /asp>
> SetHandler perl-script
> PerlResponseHandler Apache::ASP
> PerlSetVar Global .
> PerlSetVar StateDir "C:/Perl/Apache2/asp/state"
> </Location>
> # HTML::Mason pages
> PerlModule HTML::Mason::ApacheHandler2
> Alias /mason/ "C:/Perl/Apache2/mason/"
> <Directory "C:/Perl/Apache2/mason">
> # PerlSetVar MasonArgsMethod CGI
> PerlSetVar MasonDataDir "C:/Perl/Apache2/mason/data"
> PerlSetVar MasonCompRoot "C:/Perl/Apache2/mason"
> SetHandler perl-script
> PerlResponseHandler HTML::Mason::ApacheHandler2
> PerlOptions +GlobalRequest
> </Directory>
> # Template::Toolkit
> PerlLoadModule Apache::Template
> PerlModule Apache::MyTTHandler
> TT2ServiceModule Apache::MyTTHandler
> TT2EvalPerl On
> TT2IncludePath "C:/Perl/Apache2/template"
> TT2PostChomp On
> TT2PreProcess header.html
> TT2PostProcess footer.html
> Alias /template/ "C:/Perl/Apache2/template/"
> <Location /template>
> SetHandler perl-script
> PerlResponseHandler Apache::Template
> </Location>
>
> PerlModule Apache::ASP
> <Files ~ (\.asp)>
> SetHandler perl-script
> PerlHandler Apache::ASP
> PerlSetVar Global .
> PerlSetVar StateDir /tmp/asp
> </Files>
>
> Thank you for help
>
---------------------------------------------------------------------
To unsubscribe, e-mail: asp-unsubscribe [at] perl
For additional commands, e-mail: asp-help [at] perl
|
