peter.binnig at gmx
May 10, 2012, 6:16 AM
Post #4 of 4
I was wrong, it only worked for a day and now I can't even start the
device without the error.
I don't want to loose my n900 I've grown very fond of it.
dmesg shows the following lines every time this happens:
[ 207.513336] ******
[ 207.513336] * CMT rst line change detected (0)
[ 207.513366] *****
[ 207.513549] McSAAB: ACWake line 00000000
[ 207.513580] McSAAB: CAWake line 0
[ 207.513610] McSAAB: Main state: 2
[ 207.513641] McSAAB: RX state:00
[ 207.513641] McSAAB: TX state:00
[ 207.513671] McSAAB: CMT was ONLINE
[ 207.513702] McSAAB: FLAGS: 0001
[ 207.513732] McSAAB: Last RX control msg 00000000
[ 207.513732] McSAAB: Last TX control msg 50000000
[ 207.513763] McSAAB: TX C queue head 1 tail 1
[ 207.513793] McSAAB: Data RX ID: 2
[ 207.513824] McSAAB: Data TX ID: 100
[ 207.513824] McSAAB: TX queue len: 0
[ 207.513854] McSAAB: RX queue len: 0
[ 207.542236] gprs0: detached
[ 207.968139] McSAAB: ACWAKE DOWN
[ 207.968200] McSAAB: ACWAKE UP
[ 207.968261] McSAAB: WAKELINES TEST OK
[ 208.749145] cfg80211: Regulatory domain changed to country: US
[ 208.749176] (start_freq - end_freq @ bandwidth), (max_antenna_gain,
[ 208.749176] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 208.749206] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 208.749206] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 208.749237] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 208.749237] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 208.749267] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 209.246307] wl1251: 151 tx blocks at 0x3b788, 35 rx blocks at 0x3a780
[ 209.246704] wl1251: firmware booted (Rev 188.8.131.52.7)
[ 210.886688] wl1251: down
On 09.05.2012 11:55, Peter Binnig wrote:
> Thank you,
> the paper trick seems to work. If I wasn't that scared to loose my
> phone I could had figured that out by my self.
> On 08.05.2012 16:38, Paul Hartman wrote:
>> On Tue, May 8, 2012 at 3:48 AM, Peter Binnig<peter.binnig [at] gmx>
>>> I'm reading this mailing list a while now, but this is my first
>>> entry so
>>> please be gentle ;)
>>> I love my N900 but a year ago I got the following error;
>>> "All telephony functions, including emergency call, are disabled due
>>> to a
>>> communication error. To recover, you might have to reboot the device."
>>> I flashed everything on my device but the error kept returning so I
>>> it must be a hardware problem.
>>> First this happened only once a day but the time between the problems
>>> decreased from day to day to the point where I could not use the
>>> device at
>>> First this happened only once a day but the time between went down
>>> from day
>>> to day to the point where I could not use the device at all.
>>> So I returned my N900 to Nokia where they replaced the mainboard.
>>> after that
>>> I had no problems at all, but now I get the same error and the time
>>> the incidents gets shorter and shorter.
>>> The biggest problem is that the warranty expired so I can't get it
>>> fixed by
>>> Nokia for free.
>>> Can anyone provide some help or is my cell a lost cause?
>> I have not had the problem, but found this blog post with a MacGuyver
>> solution :)
>> Also a huge thread at TMO about the problem:
>> Good luck!
>> maemo-users mailing list
>> maemo-users [at] maemo
> maemo-users mailing list
> maemo-users [at] maemo
maemo-users mailing list
maemo-users [at] maemo