Mailing List Archive: Maemo: Users

Problem flashing RX-34_DIABLO_4.20 08.23-14_PR_COMBINED_MR0_ARM.bin

Index | Next | Previous | View Threaded

6tax7zu02 at sneakemail

Aug 19, 2008, 9:43 PM

Post #1 of 5 (318 views)
Permalink

Problem flashing RX-34_DIABLO_4.20 08.23-14_PR_COMBINED_MR0_ARM.bin

Flashing RX-34_DIABLO_4.20 08.23-14_PR_COMBINED_MR0_ARM.bin on my N800 does not work for me, while flashing OS 2007 releases and RX-34_2008SE.2.2007... work fine.

Is that RX-34_DIABLO image known to have problems?
If so, I'm surprised it is still up on Nokia's web site, especially without any caveats. I found one mention of this problem in the #maemo IRC channel log on 7/31/2008, but I haven't seen any other discussion of the problem (at least not with enough detail to recognize it ;-).

I'm flashing using an Ubuntu 7.10 host. The output text showing the problem is:

lionel[at]ubuntu:~/Projects/n800$ sudo ~/bin/flasher-3.0 --fiasco RX-34_DIABLO_4.20
08.23-14_PR_COMBINED_MR0_ARM.bin -f
flasher v0.8.7 (Oct 17 2006)
[ ... ]
Suitable USB device not found, waiting
USB device found found at bus 001, device address 021
Found device RX-34, hardware revision 1301
NOLO version 1.1.6
[ ... ]
Sending kernel image (1500 kB)...
100% (1500 of 1500 kB, avg. 8024 kB/s)
Flashing kernel... done.
Sending initfs image (2233 kB)...

Write failed after 0 bytes
usb_bulk_write: Resource temporarily unavailable
lionel[at]ubuntu:~/Projects/n800$

_______________________________________________
maemo-users mailing list
maemo-users[at]maemo.org
https://lists.maemo.org/mailman/listinfo/maemo-users

javacasm at gmail

Aug 19, 2008, 11:12 PM

Post #2 of 5 (296 views)
Permalink

Re: Problem flashing RX-34_DIABLO_4.20 08.23-14_PR_COMBINED_MR0_ARM.bin [In reply to]

I got the same error the first time.

Everything was ok when turn off my n800 and start again the process.

The image is ok.

Cheers

2008/8/20 Lionel D. Hummel <6tax7zu02[at]sneakemail.com>

> Flashing RX-34_DIABLO_4.20 08.23-14_PR_COMBINED_MR0_ARM.bin on my N800 does
> not work for me, while flashing OS 2007 releases and RX-34_2008SE.2.2007...
> work fine.
>
> Is that RX-34_DIABLO image known to have problems?
> If so, I'm surprised it is still up on Nokia's web site, especially without
> any caveats. I found one mention of this problem in the #maemo IRC channel
> log on 7/31/2008, but I haven't seen any other discussion of the problem (at
> least not with enough detail to recognize it ;-).
>
> I'm flashing using an Ubuntu 7.10 host. The output text showing the
> problem is:
>
> lionel[at]ubuntu:~/Projects/n800$ sudo ~/bin/flasher-3.0 --fiasco
> RX-34_DIABLO_4.20
> 08.23-14_PR_COMBINED_MR0_ARM.bin -f
> flasher v0.8.7 (Oct 17 2006)
> [ ... ]
> Suitable USB device not found, waiting
> USB device found found at bus 001, device address 021
> Found device RX-34, hardware revision 1301
> NOLO version 1.1.6
> [ ... ]
> Sending kernel image (1500 kB)...
> 100% (1500 of 1500 kB, avg. 8024 kB/s)
> Flashing kernel... done.
> Sending initfs image (2233 kB)...
>
> Write failed after 0 bytes
> usb_bulk_write: Resource temporarily unavailable
> lionel[at]ubuntu:~/Projects/n800$
>
> _______________________________________________
> maemo-users mailing list
> maemo-users[at]maemo.org
> https://lists.maemo.org/mailman/listinfo/maemo-users
>

peter at petertheplumber

Aug 20, 2008, 2:29 AM

Post #3 of 5 (294 views)
Permalink

Re: Problem flashing RX-34_DIABLO_4.20 08.23-14_PR_COMBINED_MR0_ARM.bin [In reply to]

On Wed, 2008-08-20 at 04:43 +0000, Lionel D. Hummel wrote:
> Flashing RX-34_DIABLO_4.20 08.23-14_PR_COMBINED_MR0_ARM.bin on my N800 does not work for me, while flashing OS 2007 releases and RX-34_2008SE.2.2007... work fine.
>
> Is that RX-34_DIABLO image known to have problems?
> If so, I'm surprised it is still up on Nokia's web site, especially without any caveats. I found one mention of this problem in the #maemo IRC channel log on 7/31/2008, but I haven't seen any other discussion of the problem (at least not with enough detail to recognize it ;-).
>
> I'm flashing using an Ubuntu 7.10 host. The output text showing the problem is:
>
> lionel[at]ubuntu:~/Projects/n800$ sudo ~/bin/flasher-3.0 --fiasco RX-34_DIABLO_4.20
> 08.23-14_PR_COMBINED_MR0_ARM.bin -f
> flasher v0.8.7 (Oct 17 2006)
> [ ... ]
> Suitable USB device not found, waiting
> USB device found found at bus 001, device address 021
> Found device RX-34, hardware revision 1301
> NOLO version 1.1.6
> [ ... ]
> Sending kernel image (1500 kB)...
> 100% (1500 of 1500 kB, avg. 8024 kB/s)
> Flashing kernel... done.
> Sending initfs image (2233 kB)...
>
> Write failed after 0 bytes
> usb_bulk_write: Resource temporarily unavailable
> lionel[at]ubuntu:~/Projects/n800$
>
I had the same problem. Disconnect the tablet, pull the battery to turn
it off and try again. Works okay. My tablet was stuck in a reboot loop
after the first try. Getting the software loaded is another story. I'm
finding some of the software for Diablo won't load. Notably Leafpad and
Maemopad+.

Best Regards,
--
Peter Bart <peter[at]petertheplumber.net>
http://petertheplumber.net

_______________________________________________
maemo-users mailing list
maemo-users[at]maemo.org
https://lists.maemo.org/mailman/listinfo/maemo-users

memsom at interalpha

Aug 20, 2008, 2:41 AM

Post #4 of 5 (294 views)
Permalink

Re: Problem flashing RX-34_DIABLO_4.20 08.23-14_PR_COMBINED_MR0_ARM.bin [In reply to]

Peter Bart wrote:
> Getting the software loaded is another story. I'm
> finding some of the software for Diablo won't load. Notably Leafpad and
> Maemopad+.
>

Won't load or can't be installed? Loading is what happens after
installation. Installation is what happens when you first put the
program on to your device (i.e. install the package.) I assume (maybe
wrongly?) you mean "won't install", but you might mean "load" so I
thought I should ask you for clarification. I'm a little confused (as
per usual...)

M

_______________________________________________
maemo-users mailing list
maemo-users[at]maemo.org
https://lists.maemo.org/mailman/listinfo/maemo-users

peter at petertheplumber

Aug 20, 2008, 3:46 PM

Post #5 of 5 (279 views)
Permalink

Re: Problem flashing RX-34_DIABLO_4.20 08.23-14_PR_COMBINED_MR0_ARM.bin [In reply to]

On Wed, 2008-08-20 at 10:41 +0100, Matt Emson wrote:
> Peter Bart wrote:
> > Getting the software loaded is another story. I'm
> > finding some of the software for Diablo won't load. Notably Leafpad and
> > Maemopad+.
> >
>
> Won't load or can't be installed? Loading is what happens after
> installation. Installation is what happens when you first put the
> program on to your device (i.e. install the package.) I assume (maybe
> wrongly?) you mean "won't install", but you might mean "load" so I
> thought I should ask you for clarification. I'm a little confused (as
> per usual...)

Sorry, it was late. Can I claim fatigue? Neither program will install.
Leafpad from here
<https://garage.maemo.org/frs/?group_id=712&release_id=1891>, and
Maemopad+ either through one click from here
<http://maemo.org/downloads/product/OS2008/maemopadplus/> or from here
<https://garage.maemo.org/frs/?group_id=30&release_id=1152>. I can't get
the dependency to install so of course Maemopad+ complains about that.

Best Regards,

--
Peter Bart <peter[at]petertheplumber.net>
http://petertheplumber.net

_______________________________________________
maemo-users mailing list
maemo-users[at]maemo.org
https://lists.maemo.org/mailman/listinfo/maemo-users

Index | Next | Previous | View Threaded

Interested in having your list archived? Contact lists@gossamer-threads.com