jmora at ragweed
Nov 21, 2000, 11:20 PM
Post #1 of 2
(376 views)
Permalink
|
|
lo:0 dies by heartbeat's hand
|
|
Fellow lvs-users,
This is an LVS-DR setup - no NAT, masq, etc. I'm using heartbeat 0.4.8i,
downloaded from linux-ha.org. I'm using an updated version of ldirectord
that was recommended in the mailing list.
I have both eth0 and lo:0 configured as 10.0.0.25, one as /27 and another
as /32. When heartbeat comes up/down, it removes both instances. I'd
prefer for it to either ignore the lo:0 or add a line/script to
haresources that brings this interface up again after it's removed. I want
lo:0 to exist as 10.0.0.25/32 regardless of what heartbeat does to
eth0/10.0.0.25/27.
Any suggestions, or perhaps another solution?
Thanks in advance for any help you might be able to offer.
--
jmora
|
