ug at cinetic21
Jun 17, 2009, 6:32 AM
Post #1 of 3
(728 views)
Permalink
|
|
[lvs-users] Failover eth0 eth2 serial
|
|
Hy Folks
i am using eth0, eth2 and serial
my ha.cf looks so
debugfile /var/log/ha-debug
logfile /var/log/ha-log
logfacility local0
keepalive 2
warntime 5
deadtime 10
udpport 694
bcast eth1 eth2
baud 19200
serial /dev/ttyS0
auto_failback on
node lbcisxx01
node lbcisxx02
debug 1
each node has a special pool configured in haresources, so the load was
mixed on both 2 nodes
my Heartbeat (node1 and node2) is running well, is there a problem on
one node so the second node will handle the rest from the pool.
i mean ... if on one node heartbeat are dead or machine was offline so
the other node will make the takeover
but i searching for a way to fix the following!
I will configure the nodes that in case of , eth0 or eth2 are dead, the
second node will handle the pool.
or
If with the serial cable connection have problems so also the other
aktive node will handle .....
what is the best way to konfigure this ?
Thanks (great project :) )
_______________________________________________
Please read the documentation before posting - it's available at:
http://www.linuxvirtualserver.org/
LinuxVirtualServer.org mailing list - lvs-users [at] LinuxVirtualServer
Send requests to lvs-users-request [at] LinuxVirtualServer
or go to http://lists.graemef.net/mailman/listinfo/lvs-users
|
