jmack at wm7d
Nov 4, 2007, 6:22 AM
Post #2 of 2
(314 views)
Permalink
|
On Sun, 4 Nov 2007, bobur [at] intal wrote:
> My LVS cluster should be behind a firewall that NATs all
> incoming/outgoing traffic. The LVS director and servers
> are configured according to
> http://www.linuxvirtualserver.org/VS-NAT.html setup. So,
> will the LVS work when two NATs are used: (1) NAT at
> firewall computer and (2) NAT at LVS director?
I presume the firewall will be NAT'ing incoming connections
to $outside_ip:$outside_port to $VIP:port (and the reverse
on the way out). If this is so, then the LVS director won't
know that there is a NAT firewall between it and the
clients, in which case your setup will work.
Joe
--
Joseph Mack NA3T EME(B,D), FM05lw North Carolina
jmack (at) wm7d (dot) net - azimuthal equidistant map
generator at http://www.wm7d.net/azproj.shtml
Homepage http://www.austintek.com/ It's GNU/Linux!
_______________________________________________
LinuxVirtualServer.org mailing list - lvs-users [at] LinuxVirtualServer
Send requests to lvs-users-request [at] LinuxVirtualServer
or go to http://lists.graemef.net/mailman/listinfo/lvs-users
|
