danb at zu
Oct 24, 2007, 1:38 PM
Post #1 of 2
(264 views)
Permalink
|
|
[lvs-users] heartbeat bug? Can't add second network...
|
|
I have two network blocks I am (wanting to) run LVS on. I am using
ultramonkey 3 using heartbeat and ldirectord in a HA-LB setup. Up until
relatively recently I have not used the second network since it's a
relatively small 64 IP block.
My haresources looks something like this (I wont include the entire thing):
ectype.zu.com \
ldirectord \
LVSSyncDaemonSwap::master \
IPaddr2::216.94.150.11/32/eth0/216.94.150.127 \
IPaddr2::216.94.150.15/32/eth0/216.94.150.127 \
IPaddr2::216.94.150.18/32/eth0/216.94.150.127 \
IPaddr2::216.94.150.19/32/eth0/216.94.150.127 \
IPaddr2::216.94.150.20/32/eth0/216.94.150.127 \
. . .
IPaddr2::216.94.150.124/32/eth0/216.94.150.127 \
IPaddr2::216.94.150.125/32/eth0/216.94.150.127 \
IPaddr2::216.94.150.126/32/eth0/216.94.150.127 \
IPaddr2::216.94.145.14/32/eth0/216.94.145.64
It's been this way for probably a couple of months with the single IP from
the second block of IPs. Today I added a second IP from that block:
IPaddr2::216.94.145.14/32/eth0/216.94.145.64
last line changed from ^ to v
IPaddr2::216.94.145.14/32/eth0/216.94.145.64 \
IPaddr2::216.94.145.21/32/eth0/216.94.145.64
and am suddenly getting the following when I attempt to start heartbeat.
heartbeat: 2007/10/24_14:10:09 info: **************************
heartbeat: 2007/10/24_14:10:09 info: Configuration validated. Starting
heartbeat 1.2.3.cvs.20050927
heartbeat: 2007/10/24_14:10:09 ERROR: Bad nodename in /etc/ha.d/haresources
[IPaddr2::216.94.145.21/32/eth0/216.94.145.64]
heartbeat: 2007/10/24_14:10:09 ERROR: Configuration error, heartbeat not
started.
heartbeat: 2007/10/24_14:10:09 debug: Exiting from pid 22386 [rc=6]
Do my directors need an IP on that network as well for it to work? Why will
it work with the first, but not more than the first IP I put in from the
second network block?
___________________________________________________
Dan Brown
danb [at] zu
_______________________________________________
LinuxVirtualServer.org mailing list - lvs-users [at] LinuxVirtualServer
Send requests to lvs-users-request [at] LinuxVirtualServer
or go to http://lists.graemef.net/mailman/listinfo/lvs-users
|
