Mailing List Archive by Gossamer Threads http://www.gossamer-threads.com/lists/lvs/users/ en-us (c) Gossamer Threads Inc. All rights reserved. 26 Nov 2009 02:23:39 -0800 120 75 23 http://www.gossamer-threads.com/lists/lvs/users/ http://www.gossamer-threads.com/images/lists/rss_logo.jpg Hi, I tried to set up two virtualservers, with two realservers each, all service runs locally: virtual = 10.0.2.5:80 real = 10.0.2.10:80 gate 26 Nov 2009 01:13:34 -0800 http://www.gossamer-threads.com/lists/lvs/users/22729 Greeting LVS users, I have an interesting issue I haven't been able to solve, please let me know if I've missed a documented point. I have a fairly s 25 Nov 2009 20:17:18 -0800 http://www.gossamer-threads.com/lists/lvs/users/22730 On Wed, Nov 11, 2009 at 05:37:22PM -0800, Robinson, Eric wrote: > > Reading through the documentation for Time::Period again > > I think the best way 25 Nov 2009 16:59:36 -0800 http://www.gossamer-threads.com/lists/lvs/users/22728 Hi, I've been building out a platform that uses the net-snmp-lvs module to monitor LVS stats. In testing, it worked just fine. I'm graphing connectio 25 Nov 2009 05:22:51 -0800 http://www.gossamer-threads.com/lists/lvs/users/22727 Hi, I recently performed a new setup of LVS using DR for a pair of web servers in streamlined, high-availability/capacity mode. To get around the ARP 24 Nov 2009 06:58:33 -0800 http://www.gossamer-threads.com/lists/lvs/users/22726 Hello! In my case bnx2x device driver are compiled into kernel. So I disable LRO with kernel parameter "bnx2x.disable_tpa=1" and after reboot error m 24 Nov 2009 02:57:18 -0800 http://www.gossamer-threads.com/lists/lvs/users/22725 Hello, On Sat, 21 Nov 2009, Aleksey Chudov wrote: > Hello, > > ip_forward is disabled by default and I doesn't enable it for my DR setup. > > I se 21 Nov 2009 01:42:19 -0800 http://www.gossamer-threads.com/lists/lvs/users/22724 Hello, ip_forward is disabled by default and I doesn't enable it for my DR setup. I seems my version of ethtool 6 doesn't know anything about LRO. H 21 Nov 2009 01:12:24 -0800 http://www.gossamer-threads.com/lists/lvs/users/22723 Hello, On Fri, 20 Nov 2009, Aleksey Chudov wrote: > Hello! > > I have HP ProLiant BL460c G6 servers with Broadcom Corporation NetXtreme II > BCM577 20 Nov 2009 16:41:49 -0800 http://www.gossamer-threads.com/lists/lvs/users/22722 Aye - the ip address on the realserver is .57 - just a typo on the writeup. >From what I understand there is no arp issue with dual nics and ipvs nat 20 Nov 2009 16:40:42 -0800 http://www.gossamer-threads.com/lists/lvs/users/22721 Thank you, Graeme. I'll send this messages to lvs-devel list. Regards, Aleksey -----Original Message----- From: lvs-users-bounces@linuxvirtualserv 20 Nov 2009 16:30:09 -0800 http://www.gossamer-threads.com/lists/lvs/users/22720 On 20/11/09 21:58, Jon Gray wrote: > Hey everyone, > > We're currently using nanny/pulse but it seems like nanny generates a > lot of processes and 20 Nov 2009 16:28:47 -0800 http://www.gossamer-threads.com/lists/lvs/users/22719 On Sat, 2009-11-21 at 01:13 +0200, Aleksey Chudov wrote: > As problem is only with LVS enabled Kernel I think that it is LVS specific > bug and should 20 Nov 2009 15:49:38 -0800 http://www.gossamer-threads.com/lists/lvs/users/22718 Thank you for answer! As far as I understand the bug is with LVS + Broadcom Corporation NetXtreme II BCM57711E 10-Gigabit only. May be because of rel 20 Nov 2009 15:13:50 -0800 http://www.gossamer-threads.com/lists/lvs/users/22717 "Aleksey Chudov" wrote > I have HP ProLiant BL460c G6 servers with Broadcom > Corporation NetXtreme II BCM57711E 10-Gigabit PCIe > controller. Afte 20 Nov 2009 14:21:17 -0800 http://www.gossamer-threads.com/lists/lvs/users/22716 Hey everyone, We're currently using nanny/pulse but it seems like nanny generates a lot of processes and open files and we're concerned about resour 20 Nov 2009 13:58:51 -0800 http://www.gossamer-threads.com/lists/lvs/users/22715 Why are you trying to solve the ARP issue in NAT mode? Your real server seems to have the same ip as the DIP ? Or is that just a typo? Real server w 20 Nov 2009 13:06:23 -0800 http://www.gossamer-threads.com/lists/lvs/users/22714 Hi Simm, We use LVS in our Ad Serving & analytics platform, serving more than half a billion requests every day. We never had LVS specific issue in 20 Nov 2009 09:56:17 -0800 http://www.gossamer-threads.com/lists/lvs/users/22713 Hi! On Fri, 20 Nov 2009, Siim Põder wrote: > > surprised to still see it. Hasn't Apache, Linux, and other, almost > > standard open source technolog 20 Nov 2009 09:05:00 -0800 http://www.gossamer-threads.com/lists/lvs/users/22712 On Fri, 20 Nov 2009, Siim Põder wrote: > Basically, they are saying that everyone else is using > commercial tools and therefore we should, too. th 20 Nov 2009 08:49:38 -0800 http://www.gossamer-threads.com/lists/lvs/users/22711 Hi Jay Faulkner wrote: > surprised to still see it. Hasn't Apache, Linux, and other, almost > standard open source technologies killed off that argum 20 Nov 2009 08:37:10 -0800 http://www.gossamer-threads.com/lists/lvs/users/22710 > -----Original Message----- > From: lvs-users-bounces@linuxvirtualserver.org [.mailto:lvs-users- > bounces@linuxvirtualserver.org] On Behalf Of Gusta 20 Nov 2009 07:42:07 -0800 http://www.gossamer-threads.com/lists/lvs/users/22707 Siim, I use LVS for more than 3 years now, distributing requests to 60 web servers for airline companies B2C and B2B systems. One of my directors is 20 Nov 2009 07:23:25 -0800 http://www.gossamer-threads.com/lists/lvs/users/22706 Hi, I'm having an issue currently with a setup - and it's probably something simple that I've missed and not being able to see the wood from the tree 20 Nov 2009 07:00:29 -0800 http://www.gossamer-threads.com/lists/lvs/users/22709 Hello! I have HP ProLiant BL460c G6 servers with Broadcom Corporation NetXtreme II BCM57711E 10-Gigabit PCIe controller. After enabling Virtual Serve 20 Nov 2009 06:56:53 -0800 http://www.gossamer-threads.com/lists/lvs/users/22708