beekhof at gmail
Dec 8, 2007, 11:42 PM
Post #2 of 2
(494 views)
Permalink
|
On Dec 9, 2007 5:47 AM, Jeff Humes <jeff[at]bofus.org> wrote:
> Hello again,
> I have another question about LSB scripts and standby now.
>
> version information:
> heartbeat-pils-2.1.2-3.el4.centos
> heartbeat-stonith-2.1.2-3.el4.centos
> heartbeat-gui-2.1.2-3.el4.centos
> heartbeat-2.1.2-3.el4.centos
>
>
> Question:
> I have a group setup (GROUP_knworks_assp)
>
> Here you can see it running normally.
> I have put asknmapr02 in standby to do some maintenance on it, and reboot.
> ============
> Last updated: Sat Dec 8 22:35:11 2007
> Current DC: asknmapr01 (079c442e-2e70-4f27-94e4-b62bdc96602f)
> 2 Nodes configured.
> 1 Resources configured.
> ============
>
> Node: asknmapr01 (079c442e-2e70-4f27-94e4-b62bdc96602f): online
> Node: asknmapr02 (10c0f8ed-c275-43cc-a1c0-efdce4fc2809): standby
>
> Resource Group: GROUP_knworks_assp
> knworks_assp_ip (heartbeat::ocf:IPaddr2): Started asknmapr01
> * knworks_assp_initscript (lsb:knworks_assp_init_script.sh):
> Started asknmapr01*
>
>
>
>
> When the asknmapr02 node came back up there was a problem with access to
> the lsb:knworks_assp_init_script.sh file, and it shut the resource off
> on asknmapr01 and failed it (see below)
> ============
> Last updated: Sat Dec 8 22:29:03 2007
> Current DC: asknmapr01 (079c442e-2e70-4f27-94e4-b62bdc96602f)
> 2 Nodes configured.
> 1 Resources configured.
> ============
>
> Node: asknmapr01 (079c442e-2e70-4f27-94e4-b62bdc96602f): online
> Node: asknmapr02 (10c0f8ed-c275-43cc-a1c0-efdce4fc2809): standby
>
> Resource Group: GROUP_knworks_assp
> knworks_assp_ip (heartbeat::ocf:IPaddr2): Started asknmapr01
> * knworks_assp_initscript (lsb:knworks_assp_init_script.sh):
> Started asknmapr02 (unmanaged) FAILED*
>
>
> since node 2 (asknmapr02) is in standby, I assumed that it would not
> even try, nor care to try and run it there?
we wont try to run it there - but we will check to make sure its not
running there already
if you grab a later build from
http://download.opensuse.org/repositories/server:/ha-clustering/ ,
then you should find the CRM can better handle missing scripts
> is this the intended action
> (fail the resource) for the cluster to take if a node in standby cannot
> run an LSB script?
>
> Thanks!
>
> -Jeff Humes
> _______________________________________________
> Linux-HA mailing list
> Linux-HA[at]lists.linux-ha.org
> http://lists.linux-ha.org/mailman/listinfo/linux-ha
> See also: http://linux-ha.org/ReportingProblems
>
_______________________________________________
Linux-HA mailing list
Linux-HA[at]lists.linux-ha.org
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems
|
