Mailing List Archive by Gossamer Threads http://www.gossamer-threads.com/lists/linuxha/users/ en-us (c) Gossamer Threads Inc. All rights reserved. 13 Feb 2012 03:32:19 -0800 120 75 23 http://www.gossamer-threads.com/lists/linuxha/users/ http://www.gossamer-threads.com/images/lists/rss_logo.jpg I'm using Pacemaker to handle my cluster resources (on top of heartbeat). Everything works except the collocation parameter. I want all of my resource 10 Feb 2012 13:57:15 -0800 http://www.gossamer-threads.com/lists/linuxha/users/78127 I'm trying to set up an Active/Active cluster (yes, I hear the sounds of kittens dying). Versions: Scientific Linux 6.2 pacemaker-1.1.6 resource-agen 10 Feb 2012 13:53:17 -0800 http://www.gossamer-threads.com/lists/linuxha/users/78126 Hi, I'm designing a cluster with N nodes plugged to a SAN device. There will be no shared storage on the cluster. I wanted to know if it is good pr 07 Feb 2012 23:46:54 -0800 http://www.gossamer-threads.com/lists/linuxha/users/78060 Good evening, I'm currently attempting to build a LAMP high-availability cluster in Ubuntu 11.10. The trick is that each node is in a different VLAN. 07 Feb 2012 17:51:40 -0800 http://www.gossamer-threads.com/lists/linuxha/users/78054 Severity: major Component: RA/heartbeat As in the topic, pengine is ding under some conditions and we cannot figure out why. This causes crmd to res 07 Feb 2012 06:41:23 -0800 http://www.gossamer-threads.com/lists/linuxha/users/78105 Forgot to CC the list. ---------- Forwarded message ---------- From: Dan Frincu <df.cluster@gmail.com> Date: Mon, Feb 6, 2012 at 10:16 PM Subject: R 06 Feb 2012 12:16:52 -0800 http://www.gossamer-threads.com/lists/linuxha/users/78031 We are running Ubuntu 10.04 (lucid). I am trying to upgrade from the base version of corosync and pacemaker, to the most recent available via https:// 06 Feb 2012 11:27:30 -0800 http://www.gossamer-threads.com/lists/linuxha/users/78027 Hi! but like with CPU affinity there should be no needless change of the DC. I also wondered why after each configuration change the DC is newly elec 06 Feb 2012 00:05:13 -0800 http://www.gossamer-threads.com/lists/linuxha/users/78015 Ich werde ab 06.02.2012 nicht im Büro sein. Ich kehre zurück am 09.02.2012. Ich werde Ihre Nachricht nach meiner Rückkehr beantworten. I will answer 05 Feb 2012 15:04:21 -0800 http://www.gossamer-threads.com/lists/linuxha/users/78010 Hello all, I'm using pacemaker to manage our some of resources including Virtual IP. It is working well in case of failover. Now we've to execute 04 Feb 2012 18:53:24 -0800 http://www.gossamer-threads.com/lists/linuxha/users/78001 Hi all, I've got a very simple 2 node setup. It runs a few VIPs and uses ldirectord to load balance. That part works perfectly. On the same 2 node 04 Feb 2012 16:57:55 -0800 http://www.gossamer-threads.com/lists/linuxha/users/78000 Hi, I'm making a two-node cluster for a dns caching server (unbound) on two Ubuntu 10.04 hosts. I'm pretty clueless about how to control the "unboun 03 Feb 2012 02:35:38 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77987 Hey hey, I am new to HA Heartbeat, and I am wondering about one thing as I could not find any info about it on Your page. Can we run the HA heartbea 02 Feb 2012 15:10:27 -0800 http://www.gossamer-threads.com/lists/linuxha/users/78047 Hi! I have something running using OCFS on SLES11 SP1: ocf:pacemaker:controld ocf:ocfs2:o2cb At least I could mount the filesystem with it: /dev/dr 02 Feb 2012 06:32:56 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77960 Hi Just wonder if someone has succeded to configured a working HA configuration with Pacemaker/corosync and OCFS2 file systems, meaning using ocfs2. 02 Feb 2012 05:54:20 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77958 test, please ignore _______________________________________________ Linux-HA mailing list Linux-HA@lists.linux-ha.org http://lists.linux-ha.org/mailma 01 Feb 2012 07:37:36 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77924 >>> Sascha Reimann <sascha.reimann@hostway.de> schrieb am 30.01.2012 um 11:28 in Nachricht <4F2670E5.5000408@hostway.de>: > Hi Dejan, > > thanks for 30 Jan 2012 23:28:10 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77869 I'm trying to follow the directions for setting up a dual-primary DRBD setup with CMAN and Pacemaker. I'm stuck at an annoying spot: Pacemaker won't p 30 Jan 2012 14:42:34 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77864 Hey guys, Hoping you can help me here. We've got an HA set up that is using ldirector to redirect traffic to a pair of back end servers running LVS 30 Jan 2012 12:13:33 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77860 I'm trying to figure out what which versions of which files I need to compile pacemaker-pygui. I didn't have (too) much trouble with Scientific Linux 30 Jan 2012 11:48:16 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77859 Hi All, Apologies for the mass email, but it seemed most appropriate to post a followup to all the lists I originally sent the LCA 2012 HA miniconf 29 Jan 2012 19:24:37 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77886 Hi all, I've got a working LVS HA cluster with several load balanced applications running successfully. The HA cluster is a combination PROD and Te 28 Jan 2012 05:46:05 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77827 I have an application that must simultaneously run as a non-root user and listen on a port below 1024. I can do this, by hand, by making some iptables 27 Jan 2012 12:22:07 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77822 Quite new at git I want to start to commit to the mysql RA. There are minor changes, I would call aesthetic. There are some things I would like to ch 27 Jan 2012 09:22:31 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77816 hello, I have a problem with timeouts from my RA for virtual Xen machines. Since xm commands are very slow, I have replaced them by some xentop and 27 Jan 2012 01:49:52 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77810 Hello, Is there a way to get meta attribute "My_attr" from resource agent? For instance, instance attribute "attr" I can get by OCF_RESKEY_attr in m 26 Jan 2012 00:35:48 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77783 Hello. A change you may want to consider for the mysql monitor (I believe we have the latest version but honestly am not sure where it came from at 25 Jan 2012 12:36:31 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77795 Hey, I've build a cluster with one pacemaker resource named ClusterIP. The change by failover is very fast and is ok. My problem is that services 23 Jan 2012 00:59:40 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77683 Hi, this is the next release of the Linux Cluster Management Console. The LCMC helps you to configure a Pacemaker cluster without the need to go to t 22 Jan 2012 22:18:35 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77676 On Thu, Jan 12, 2012 at 12:29:18PM +0100, Niclas Müller wrote: > Hey Guys, > > I'm currently going to setup a Linux HA Cluster with apache and MySQL. 20 Jan 2012 10:26:14 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77664 Hi, I am using linux-ha heartbeat on a two simple nodes cluster. For some reason which I can't figure out, the socket /var/run/heartbeat/register is 19 Jan 2012 06:18:53 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77639 Hi, I have a simple two node configuration node server1C57 \ attributes standby="off" node server2C57 \ attributes standby="off" p 17 Jan 2012 13:59:37 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77596 Hi Dejan, I'm evaluating crmsh in place of pacemaker bundled crm (because of rsc_ticket support). With current crmsh (b4b063507de0) it is impossible 16 Jan 2012 03:14:29 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77546 <b><span style="font-size: 24pt;"> <a alt="8barackannootokappearenceanercodxs" id="acrosatableatribuiubeiseradmitonehnakd" href="4kasldaverkamp.gj9.m 13 Jan 2012 09:06:37 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77500 >>> Miles Fidelman <mfidelman@meetinghouse.net> schrieb am 12.01.2012 um 21:59 in Nachricht <4F0F49AD.8010706@meetinghouse.net>: [...] > Not really. 12 Jan 2012 23:56:26 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77488 >>> "Paul O'Rorke" <paul@paulororke.net> schrieb am 12.01.2012 um 21:20 in Nachricht <CADinG56TMJU1Gb9Zw3JkdcKh=v3ms--+0DmTraX8CD9WtkHt3Q@mail.gmail.c 12 Jan 2012 23:52:08 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77487 I'm currently going to setup a Linux HA Cluster with apache and MySQL. I've created three VM with KVM Vitalization. One NetworkManager as DNS and DHCP 12 Jan 2012 13:22:02 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77477 Please excuse me if this is documented and I failed to find it. I have been investigating ha-linux to provide Business Continuity in our mail server. 12 Jan 2012 12:20:04 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77474 Hey Guys, I'm currently going to setup a Linux HA Cluster with apache and MySQL. I've created three VM with KVM Vitalization. One NetworkManager as 12 Jan 2012 03:29:18 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77473 Ich bin bis 31.01.2012 abwesend. Ab dem 31.01.2012 werde ich wieder zur Verfügung stehen. Hinweis: Dies ist eine automatische Antwort auf Ihre Nach 09 Jan 2012 13:01:52 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77428 On 01/09/2012 08:56 AM, Ulrich Windl wrote: >> However, I'm not going to write a patch for the filesystem agent, as I'm >> right now not working with 09 Jan 2012 00:44:10 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77396 Moin, Im having the issue, that promoting a master can run into the promote timeout. After that, the resource is stopped and started as a slave. In 06 Jan 2012 09:14:09 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77389 >>> Tanja Roth <taroth@suse.de> schrieb am 05.01.2012 um 14:23 in Nachricht <20120105142353.72e722d7@suse.de>: > Hi Andrew, > > On 2012-01-05 12:07 A 05 Jan 2012 06:45:22 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77365 Hi! Looking into the Filesystem RA of SLES11 SP1, I'm wondering: Previously I found out that the RA happily mounts a filesystem with errors. Now I f 05 Jan 2012 01:27:23 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77362 Hi, This LCMC 1.1.2 update is important if you have redhat/centos 6 Pacemaker cluster. The LCMC used ptest command to get its status information. Ba 04 Jan 2012 23:11:04 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77359 Dears i realy apriciated your favotreble replay .. but after i disabled DBUS function on confibure.ac i configured with out any error . but while 30 Dec 2011 22:53:52 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77318 Ich werde ab 24.12.2011 nicht im Büro sein. Ich kehre zurück am 02.01.2012. Ich werde Ihre Nachricht nach meiner Rückkehr beantworten. I will answer 25 Dec 2011 06:56:21 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77287 Dear Team, am facing an error while compiling an /Reusable-Cluster-Components-glue--ebb567a5b758 pakage in solaris 10 X86 for Linux HA Service Pak 25 Dec 2011 06:54:11 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77286 To follow up on this matter, I've solved the problem and it was not a bug in pacemaker. fencing/commands.c checks to see if it can fence the node wit 22 Dec 2011 08:50:25 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77270 Hello! Heading the DRBD Guide for DRBD with OCFS (with pacemaker), it suggests that fencing needs to be done whenever there is a problem with one of 22 Dec 2011 02:19:51 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77265 Hi all! I'm trying to setup a new 2 nodes MySQL Cluster with DRBD, Corosync and Pacemaker. Everything is fine when corosync is started in both 21 Dec 2011 02:28:01 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77257 >>> Andreas Kurz <andreas@hastexo.com> schrieb am 20.12.2011 um 22:57 in Nachricht <4EF104B3.7050109@hastexo.com>: > Hello, > > On 12/20/2011 02:47 P 21 Dec 2011 02:18:23 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77254 >>> <alain.moulle@bull.net> schrieb am 20.12.2011 um 14:35 in Nachricht <OF8CDA8EE9.357CCA86-ONC125796C.004A7CEE-C125796C.004B2E1F@bull.net>: > Ooops, 20 Dec 2011 05:49:42 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77231 Hi! I have a dual-primary DRBD that is not working well: It was working, then I shut it down and restarted it. DRBD complained about split brain and 20 Dec 2011 05:47:38 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77230 >>> <alain.moulle@bull.net> schrieb am 20.12.2011 um 10:39 in Nachricht <OF861286F8.251CE7D6-ONC125796C.0033E7EC-C125796C.00358D2F@bull.net>: > Hi > 20 Dec 2011 02:01:15 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77223 Hi! I have a question: DRBD can only handle two peers (not three). When planning a dual-primary configuration, one might imageine having a block devi 20 Dec 2011 01:52:22 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77222 Hi I just would like how to manager the behavior described below : Let's say for the example that we have two nodes in Pacemaker configuration, an 20 Dec 2011 01:39:13 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77220 I will be out of the office starting 19/12/2011 and will not return until 20/12/2011. _____________________________________________________________ 19 Dec 2011 01:02:32 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77204 >>> Andreas Kurz <andreas@hastexo.com> schrieb am 16.12.2011 um 14:01 in Nachricht <4EEB412E.9010000@hastexo.com>: > Hello Ulrich, > > On 12/16/2011 19 Dec 2011 00:15:14 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77202 >>> Dominik Klein <dominik.klein@googlemail.com> schrieb am 16.12.2011 um 12:34 in Nachricht <4EEB2CDB.6020609@googlemail.com>: > > On 12/15/2011 11 16 Dec 2011 04:34:48 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77187 Hi! I have some troubel with OCFS on top of DRBD that seems to be timing-related: OCFS is working on the DRBD when DRBD itself wants to vhange someth 16 Dec 2011 04:31:32 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77186 Dear linux-ha group: I am a new administrator for heartbeat. I installed Heartbeat-3-0-4a3eac571f44, on my 2 Centos server. But I found they cannot 16 Dec 2011 01:57:33 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77189 Hi! I have a problem with some client-server software (I don't want to name it here) where client and server both need an etry for inetd (xinetd). It 15 Dec 2011 02:19:32 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77176 Dear List I recently installed a two node heartbeat Cluster with two identical Servers. So far so good. for the separate Cluster Net i choose the I 13 Dec 2011 07:38:18 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77157 Hi. Heartbeat version is heartbeat-3.0.4-1.fc15.1.i686. While testing ocf script IPaddr2, it returned an error message "./IPaddr2: line 68: /lib/he 13 Dec 2011 00:43:56 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77146 >>>crm configure primitive iptables lsb::iptables op monitor interval=10s > o/p is > > ERROR: lsb:cups: could not parse meta-data: > ERROR: lsb:iptabl 12 Dec 2011 22:15:50 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77141 Hi! We also had the strange effect that ocf:heartbeat:IPaddr2 monitors time out when there was significant disk write activity (we used 30s timeouts) 12 Dec 2011 03:03:02 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77129 Hi! As nobody answered (FAIR), I'm replying to my own message: As it turned out, there's a comment somewhere in the LRM sources that states "this par 12 Dec 2011 02:33:27 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77127 its a two node cluster with online updates. grpSAPINSTresources is a group that runs on node2, while grpSAPDBresources is another group that runs on 12 Dec 2011 00:35:59 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77115 > > Hi, When I am trying to add lsb resource agent, through crm interface >>crm configure primitive iptables lsb::iptables op monitor interval=10s o 11 Dec 2011 23:42:34 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77114 Hi! I have configured a Dual-Primary DRBD as "disk" for OCFS. Occasionally the Filesystem RA reports a "Wrong medium type": Dec 7 16:44:46 h02 lrmd: 09 Dec 2011 04:56:00 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77089 I built Heartbeat 3.0.5 following the wiki document ,but i can find ha-propagate in my /usr/lib/heatbeat feibaliang _____________________________ 08 Dec 2011 23:14:54 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77158 >>> Dejan Muhamedagic <dejanmm@fastmail.fm> schrieb am 08.12.2011 um 11:28 in Nachricht <20111208102833.GA12338@walrus.homenet>: > Hi, > > On Wed, De 08 Dec 2011 03:08:06 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77049 Hi! While the openais cluster (SLES11 SP1) was up and running, I saw this message in syslog when resources changed state: Dec 7 09:39:33 h02 crmd: 07 Dec 2011 05:26:52 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77034 Hello. I have two servers (radius1, radius2). I've set up the cluster resource - IPaddr2. I used next commands to set up this resource: # crm confi 07 Dec 2011 02:56:31 -0800 http://www.gossamer-threads.com/lists/linuxha/users/77048 This cluster reboots(fenced) both nodes, if I disconnects network of any nodes(simulating network failure). I want that if any node disconnects from 04 Dec 2011 12:29:49 -0800 http://www.gossamer-threads.com/lists/linuxha/users/76939 Hi Florian! Thank you very much for your kind welcome. On 03/12/11 09:58, Florian Haas wrote > But as it turns out what I, putting myself into the s 03 Dec 2011 11:10:47 -0800 http://www.gossamer-threads.com/lists/linuxha/users/76932 I have a geographically dispersed ("stretch") cluster, where one node is in data center A and the other node is in data center B. I have done everythi 03 Dec 2011 05:36:52 -0800 http://www.gossamer-threads.com/lists/linuxha/users/76930 On Sat, Dec 3, 2011 at 9:58 AM, Florian Haas <florian@hastexo.com> wrote: > > But as it turns out what I, putting myself into the shoes of a > resour 03 Dec 2011 02:43:34 -0800 http://www.gossamer-threads.com/lists/linuxha/users/76929 Hi Linux-HA Users! Heartbeat and Pacemaker make use of shellscripts for the definition of OCF resource agents. This approach was very good since it h 02 Dec 2011 17:34:20 -0800 http://www.gossamer-threads.com/lists/linuxha/users/76925 Hi! After the preceeding discussion about the "reload" action I added a "reload" to my RA. Now I have another problem: Assume the configuration grou 02 Dec 2011 01:17:05 -0800 http://www.gossamer-threads.com/lists/linuxha/users/76912 Hi Everyone, I'm in the process of configuring a 2 node + DRBD enabled DHCP cluster using the following packages: SLES 11 SP1, with Pacemaker 1.1.6 01 Dec 2011 09:25:33 -0800 http://www.gossamer-threads.com/lists/linuxha/users/76887 OK, I read "9.5. Reloading Services After a Definition Change".So the filesystem RA lacks a "reload" operation. However even when having a "reload" o 01 Dec 2011 00:35:38 -0800 http://www.gossamer-threads.com/lists/linuxha/users/76872 >>> "Gao,Yan" <ygao@suse.com> schrieb am 01.12.2011 um 06:55 in Nachricht <4ED716BE.9090802@suse.com>: > Hi, > > On 11/30/11 21:35, Ulrich Windl wrot 01 Dec 2011 00:10:57 -0800 http://www.gossamer-threads.com/lists/linuxha/users/76871 >>> Dejan Muhamedagic <dejanmm@fastmail.fm> schrieb am 30.11.2011 um 15:35 in Nachricht <20111130143512.GB6964@walrus.homenet>: > Hi, > > On Wed, Nov 30 Nov 2011 23:37:57 -0800 http://www.gossamer-threads.com/lists/linuxha/users/76869 Hi! It seems the execution time is shown in milliseconds. However it seems all execution times are multiples of 10ms. Is that intended? Examples (hu 30 Nov 2011 05:56:34 -0800 http://www.gossamer-threads.com/lists/linuxha/users/76847 Hi! Simple question: when is the attribute "cib-last-written" in XML's "cib" element updated? I have a CIB that was changed (new epoch) today, but t 30 Nov 2011 05:35:42 -0800 http://www.gossamer-threads.com/lists/linuxha/users/76845 Hi, when changing the performce-related-only mount option for a filesystem I noticed that the LRM decided to restart the resource and all the dependi 30 Nov 2011 03:58:50 -0800 http://www.gossamer-threads.com/lists/linuxha/users/76836 Hi I 'm facing a problem with this RA, I wonder if is it a real one already identified : in fact, the stop of the mysql resource fails and therefore 30 Nov 2011 00:46:35 -0800 http://www.gossamer-threads.com/lists/linuxha/users/76827 Hello, Due to a serious defect in external/ipmi, which is one of the most used stonith agents, we decided to make another release of glue. There were 29 Nov 2011 01:47:23 -0800 http://www.gossamer-threads.com/lists/linuxha/users/76797 I guess he meant a more comfortable way ;-) >>> Andrew Beekhof <andrew@beekhof.net> schrieb am 28.11.2011 um 23:21 in Nachricht <CAEDLWG2pG8vV0frPQvP 28 Nov 2011 23:36:49 -0800 http://www.gossamer-threads.com/lists/linuxha/users/76790 Hi! While we're at it: Does specifying a priority implicitly create a start order, or ist that just a start preference? Maybe if the sbd is not handl 28 Nov 2011 23:35:10 -0800 http://www.gossamer-threads.com/lists/linuxha/users/76789 Hi, Here is a new LCMC user guide, well sort of: http://lcmc.sourceforge.net/lcmc-user-guide.html The LCMC is a great piece of software, only thing 28 Nov 2011 22:34:31 -0800 http://www.gossamer-threads.com/lists/linuxha/users/76787 is it good/required to create order constraint for sbd resource I am using following fencing resource: primitive sbd_stonith stonith:external/sbd \ 28 Nov 2011 09:54:17 -0800 http://www.gossamer-threads.com/lists/linuxha/users/76765 Hi sorry but I forgot if there is another way than "crm configure edit" to modify all the value of on-fail="xxxx" for all resources in the configura 28 Nov 2011 06:04:45 -0800 http://www.gossamer-threads.com/lists/linuxha/users/76754 Hi I always have this problem. Just a little question : when this occurs, meaning a monitoring happening whereas there is just a crm command reques 28 Nov 2011 05:54:33 -0800 http://www.gossamer-threads.com/lists/linuxha/users/76752 Hi! Here is a locking sample (potential replacement functions) that seems to work: Just start the script more than once as a background process and w 28 Nov 2011 02:09:35 -0800 http://www.gossamer-threads.com/lists/linuxha/users/76748 Hi! I was requested to work around a kernel bug by adding locks to my RA. Reading the docs I found that ist supposed to be done via ocf_take_lock $L 28 Nov 2011 01:07:58 -0800 http://www.gossamer-threads.com/lists/linuxha/users/76747 Hello, I have a simple heartbeat setup - one master, one slave. Control passes perfectly between the nodes. However, during a recent installation I 27 Nov 2011 11:28:34 -0800 http://www.gossamer-threads.com/lists/linuxha/users/76761 Hello everyone in this list, I am a new member in the list. I write you because a need to install heartbeat, but I am new with this software. I try t 26 Nov 2011 14:39:12 -0800 http://www.gossamer-threads.com/lists/linuxha/users/76716