alanr at suse
May 30, 2000, 12:30 AM
Post #2 of 2
(321 views)
Permalink
|
"Jorge Boncompte (DTI2)" wrote:
>
> Hi,
>
> Well my question is how can heartbeat detect that there is a cabling
> problem? In my scenario, I have two machines with heartbeat 0.4.7b working
> fine with ethernet and a serial link. If machine A goes down, machine B
> takesover the resources (an IP address). But if I unplug machine A from
> ethernet instead of turn it off, machine B takesover the IP adress until I
> reconnect machine A. After that both machines assume that they are the
> owners of the resources.
This means your serial link isn't working. 0.4.7b should detect this
broken link and complain, at least if it's properly configured.
In fact, there should be several such messages in your logs, as at least
two different pieces of code note the problem in different ways.
If you would send your configuration files, and the logs from startup to
each machine detecting the other is down, then the problem might become
a little clearer.
Thanks!!
-- Alan Robertson
alanr [at] suse
|
