jasny at vidsoft
Jan 5, 2008, 2:33 PM
Post #1 of 2
(288 views)
Permalink
|
|
Regression: VIDIOCGMBUF ioctl hangs on bttv driver (2.6.24-rc6)
|
|
Hi,
During some tests I've noticed that the VIDIOCGMBUF ioctl hangs on my
bttv video device. It simply does not return and the process is stuck in
the D+ state. With Kernel 2.6.22.9 the (attached) testcase works like a
charm. The V4L2 interface is working with 2.6.24, too (at least displays
xawtv the usual pixel snow).
Hard and Software:
64 bit Linux 2.6.24-rc6 (todays pull) on a Intel Core 2 Duo
WinTV PCI:
05:02.0 0400: 109e:036e (rev 02)
05:02.1 0480: 109e:0878 (rev 02)
dmesg:
Rincewind:~# dmesg |grep bttv
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 2) at 0000:05:02.0, irq: 23, latency: 64, mmio: 0xdfefe000
bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
bttv0: using: Hauppauge (bt878) [card=10,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
bttv0: Hauppauge eeprom indicates model#61324
bttv0: tuner type=14
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
from /proc/interrupts:
23: 55900 0 IO-APIC-fasteoi ehci_hcd:usb2, uhci_hcd:usb5, bttv0
If I could help with more logs, a bisection, some debug printks, please contact me.
Thanks!
Gregor
|
bttvregression.c
