Login | Register For Free | Help
Search for: (Advanced)

Mailing List Archive: Linux: Kernel

[PATCH v3 3/3] Staging: ipack: add support for IP-OCTAL mezzanine board

 

 

Linux kernel RSS feed   Index | Next | Previous | View Threaded


siglesias at igalia

May 8, 2012, 12:43 AM

Post #1 of 1 (93 views)
Permalink
[PATCH v3 3/3] Staging: ipack: add support for IP-OCTAL mezzanine board

IP-OCTAL is a 8-channels serial port device. There are several models one per
each standard: RS-232, RS-422, RS-485.

This driver can manage all of them.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias [at] igalia>
---
drivers/staging/ipack/Kconfig | 2 +
drivers/staging/ipack/Makefile | 1 +
drivers/staging/ipack/TODO | 9 +
drivers/staging/ipack/devices/Kconfig | 7 +
drivers/staging/ipack/devices/Makefile | 1 +
drivers/staging/ipack/devices/ipoctal.c | 871 +++++++++++++++++++++++++++++++
drivers/staging/ipack/devices/ipoctal.h | 81 +++
drivers/staging/ipack/devices/scc2698.h | 229 ++++++++
8 files changed, 1201 insertions(+)
create mode 100644 drivers/staging/ipack/devices/Kconfig
create mode 100644 drivers/staging/ipack/devices/Makefile
create mode 100644 drivers/staging/ipack/devices/ipoctal.c
create mode 100644 drivers/staging/ipack/devices/ipoctal.h
create mode 100644 drivers/staging/ipack/devices/scc2698.h

diff --git a/drivers/staging/ipack/Kconfig b/drivers/staging/ipack/Kconfig
index a3f5925..7fa8676 100644
--- a/drivers/staging/ipack/Kconfig
+++ b/drivers/staging/ipack/Kconfig
@@ -10,6 +10,8 @@ menuconfig IPACK_BUS

if IPACK_BUS

+source "drivers/staging/ipack/devices/Kconfig"
+
source "drivers/staging/ipack/bridges/Kconfig"

endif # IPACK
diff --git a/drivers/staging/ipack/Makefile b/drivers/staging/ipack/Makefile
index 59b8762..85ff223 100644
--- a/drivers/staging/ipack/Makefile
+++ b/drivers/staging/ipack/Makefile
@@ -2,4 +2,5 @@
# Makefile for the IPACK bridge device drivers.
#
obj-$(CONFIG_IPACK_BUS) += ipack.o
+obj-y += devices/
obj-y += bridges/
diff --git a/drivers/staging/ipack/TODO b/drivers/staging/ipack/TODO
index d5a5735..11828ed 100644
--- a/drivers/staging/ipack/TODO
+++ b/drivers/staging/ipack/TODO
@@ -22,6 +22,15 @@ TPCI-200
* It has a linked list with the tpci200 devices it is managing. Get rid of it
and use driver_for_each_device() instead.

+IP-OCTAL
+--------
+
+* It has a linked list which saves the devices it is currently
+ managing. It should use the driver_for_each_device() function. It is not there
+ due to the impossibility of using container_of macro to recover the
+ corresponding "struct ipoctal" because the attribute "struct ipack_device" is
+ a pointer. This code should be refactored.
+
Ipack
-----

diff --git a/drivers/staging/ipack/devices/Kconfig b/drivers/staging/ipack/devices/Kconfig
new file mode 100644
index 0000000..a8b61e2
--- /dev/null
+++ b/drivers/staging/ipack/devices/Kconfig
@@ -0,0 +1,7 @@
+config SERIAL_IPOCTAL
+ bool "IndustryPack IP-OCTAL uart support"
+ depends on IPACK_BUS
+ help
+ This driver supports the IPOCTAL serial port device for the IndustryPack bus.
+ default n
+
diff --git a/drivers/staging/ipack/devices/Makefile b/drivers/staging/ipack/devices/Makefile
new file mode 100644
index 0000000..6de18bd
--- /dev/null
+++ b/drivers/staging/ipack/devices/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_SERIAL_IPOCTAL) += ipoctal.o
diff --git a/drivers/staging/ipack/devices/ipoctal.c b/drivers/staging/ipack/devices/ipoctal.c
new file mode 100644
index 0000000..ed0272c
--- /dev/null
+++ b/drivers/staging/ipack/devices/ipoctal.c
@@ -0,0 +1,871 @@
+/**
+ * ipoctal.c
+ *
+ * driver for the GE IP-OCTAL boards
+ * Copyright (c) 2009 Nicolas Serafini, EIC2 SA
+ * Copyright (c) 2010,2011 Samuel Iglesias Gonsalvez <siglesia [at] cern>, CERN
+ * Copyright (c) 2012 Samuel Iglesias Gonsalvez <siglesias [at] igalia>, Igalia
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/interrupt.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/tty_flip.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/atomic.h>
+#include "../ipack.h"
+#include "ipoctal.h"
+#include "scc2698.h"
+
+#define IP_OCTAL_MANUFACTURER_ID 0xF0
+#define IP_OCTAL_232_ID 0x22
+#define IP_OCTAL_422_ID 0x2A
+#define IP_OCTAL_485_ID 0x48
+
+#define IP_OCTAL_ID_SPACE_VECTOR 0x41
+#define IP_OCTAL_NB_BLOCKS 4
+
+static struct ipack_driver driver;
+static const struct tty_operations ipoctal_fops;
+
+struct ipoctal {
+ struct list_head list;
+ struct ipack_device *dev;
+ unsigned int board_id;
+ struct scc2698_channel *chan_regs;
+ struct scc2698_block *block_regs;
+ struct ipoctal_stats chan_stats[NR_CHANNELS];
+ char *buffer[NR_CHANNELS];
+ unsigned int nb_bytes[NR_CHANNELS];
+ unsigned int count_wr[NR_CHANNELS];
+ struct ipoctal_config chan_config[NR_CHANNELS];
+ wait_queue_head_t queue[NR_CHANNELS];
+ unsigned short error_flag[NR_CHANNELS];
+ spinlock_t lock[NR_CHANNELS];
+ unsigned int pointer_read[NR_CHANNELS];
+ unsigned int pointer_write[NR_CHANNELS];
+ atomic_t open[NR_CHANNELS];
+ unsigned char write;
+ struct tty_port tty_port[NR_CHANNELS];
+ struct tty_driver *tty_drv;
+};
+
+/* Linked list to save the registered devices */
+static LIST_HEAD(ipoctal_list);
+
+inline void ipoctal_write_io_reg(struct ipoctal *ipoctal, unsigned char *dest, unsigned char value)
+{
+ unsigned long offset;
+
+ offset = ((void *) dest) - ipoctal->dev->io_space.address;
+ ipoctal->dev->ops->write8(ipoctal->dev, IPACK_IO_SPACE, offset, value);
+}
+
+inline void ipoctal_write_cr_cmd(struct ipoctal *ipoctal, unsigned char *dest, unsigned char value)
+{
+ ipoctal_write_io_reg(ipoctal, dest, value);
+}
+
+inline unsigned char ipoctal_read_io_reg(struct ipoctal *ipoctal, unsigned char *src)
+{
+ unsigned long offset;
+ unsigned char value;
+
+ offset = ((void *) src) - ipoctal->dev->io_space.address;
+ ipoctal->dev->ops->read8(ipoctal->dev, IPACK_IO_SPACE, offset, &value);
+ return value;
+}
+
+struct ipoctal *ipoctal_find_board(struct tty_struct *tty)
+{
+ struct ipoctal *p;
+
+ list_for_each_entry(p, &ipoctal_list, list) {
+ if (tty->driver->major == p->tty_drv->major)
+ return p;
+ }
+
+ return NULL;
+}
+
+static int ipoctal_port_activate(struct tty_port *port, struct tty_struct *tty)
+{
+ struct ipoctal *ipoctal;
+ int channel = tty->index;
+
+ ipoctal = ipoctal_find_board(tty);
+
+ if (ipoctal == NULL) {
+ pr_err("Device not found. Major %d\n", tty->driver->major);
+ return -ENODEV;
+ }
+
+ ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+ CR_ENABLE_RX);
+ tty->driver_data = ipoctal;
+
+ return 0;
+}
+
+int ipoctal_open(struct tty_struct *tty, struct file *file)
+{
+ int channel = tty->index;
+ int res;
+ struct ipoctal *ipoctal;
+
+ ipoctal = ipoctal_find_board(tty);
+
+ if (ipoctal == NULL) {
+ pr_err("Device not found. Major %d\n", tty->driver->major);
+ return -ENODEV;
+ }
+
+ if (atomic_read(&ipoctal->open[channel]))
+ return -EBUSY;
+
+ res = tty_port_open(&ipoctal->tty_port[channel], tty, file);
+ if (res)
+ return res;
+
+ atomic_inc(&ipoctal->open[channel]);
+ return 0;
+}
+
+static void ipoctal_reset_stats(struct ipoctal_stats *stats)
+{
+ stats->tx = 0;
+ stats->rx = 0;
+ stats->rcv_break = 0;
+ stats->framing_err = 0;
+ stats->overrun_err = 0;
+ stats->parity_err = 0;
+}
+
+static void ipoctal_free_channel(struct tty_struct *tty)
+{
+ int channel = tty->index;
+ struct ipoctal *ipoctal = tty->driver_data;
+
+ if (ipoctal == NULL)
+ return;
+
+ ipoctal_reset_stats(&ipoctal->chan_stats[channel]);
+ ipoctal->pointer_read[channel] = 0;
+ ipoctal->pointer_write[channel] = 0;
+ ipoctal->nb_bytes[channel] = 0;
+}
+
+void ipoctal_close(struct tty_struct *tty, struct file *filp)
+{
+ int channel = tty->index;
+ struct ipoctal *ipoctal = tty->driver_data;
+
+ tty_port_close(&ipoctal->tty_port[channel], tty, filp);
+
+ if (atomic_dec_and_test(&ipoctal->open[channel]))
+ ipoctal_free_channel(tty);
+}
+
+static int ipoctal_get_icount(struct tty_struct *tty, struct serial_icounter_struct *icount)
+{
+ struct ipoctal *ipoctal = tty->driver_data;
+ int channel = tty->index;
+
+ icount->cts = 0;
+ icount->dsr = 0;
+ icount->rng = 0;
+ icount->dcd = 0;
+ icount->rx = ipoctal->chan_stats[channel].rx;
+ icount->tx = ipoctal->chan_stats[channel].tx;
+ icount->frame = ipoctal->chan_stats[channel].framing_err;
+ icount->parity = ipoctal->chan_stats[channel].parity_err;
+ icount->brk = ipoctal->chan_stats[channel].rcv_break;
+ return 0;
+}
+
+static int ipoctal_irq_handler(void *arg)
+{
+ unsigned int channel;
+ unsigned int block;
+ unsigned char isr;
+ unsigned char sr;
+ unsigned char isr_tx_rdy, isr_rx_rdy;
+ unsigned char value;
+ unsigned char flag;
+ struct tty_struct *tty;
+ struct ipoctal *ipoctal = (struct ipoctal *) arg;
+
+ /* Check all channels */
+ for (channel = 0; channel < NR_CHANNELS; channel++) {
+
+ /* If there is no client, skip the check */
+ if (!atomic_read(&ipoctal->open[channel]))
+ continue;
+
+ tty = tty_port_tty_get(&ipoctal->tty_port[channel]);
+ if (!tty)
+ continue;
+
+ /*
+ * The HW is organized in pair of channels.
+ * See which register we need to read from
+ */
+ block = channel / 2;
+ isr = ipoctal_read_io_reg(ipoctal, &ipoctal->block_regs[block].u.r.isr);
+ sr = ipoctal_read_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.r.sr);
+
+ if ((channel % 2) == 1) {
+ isr_tx_rdy = isr & ISR_TxRDY_B;
+ isr_rx_rdy = isr & ISR_RxRDY_FFULL_B;
+ } else {
+ isr_tx_rdy = isr & ISR_TxRDY_A;
+ isr_rx_rdy = isr & ISR_RxRDY_FFULL_A;
+ }
+
+ /* In case of RS-485, change from TX to RX when finishing TX. Half-duplex. */
+ if ((ipoctal->board_id == IP_OCTAL_485_ID) &&
+ (sr & SR_TX_EMPTY) && (ipoctal->nb_bytes[channel] == 0)) {
+ ipoctal_write_io_reg(ipoctal,
+ &ipoctal->chan_regs[channel].u.w.cr,
+ CR_DISABLE_TX);
+ ipoctal_write_cr_cmd(ipoctal,
+ &ipoctal->chan_regs[channel].u.w.cr,
+ CR_CMD_NEGATE_RTSN);
+ ipoctal_write_io_reg(ipoctal,
+ &ipoctal->chan_regs[channel].u.w.cr,
+ CR_ENABLE_RX);
+ ipoctal->write = 1;
+ wake_up_interruptible(&ipoctal->queue[channel]);
+ }
+
+ /* RX data */
+ if (isr_rx_rdy && (sr & SR_RX_READY)) {
+ value = ipoctal_read_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.r.rhr);
+ flag = TTY_NORMAL;
+
+ /* Error: count statistics */
+ if (sr & SR_ERROR) {
+ ipoctal_write_cr_cmd(ipoctal,
+ &ipoctal->chan_regs[channel].u.w.cr,
+ CR_CMD_RESET_ERR_STATUS);
+
+ if (sr & SR_OVERRUN_ERROR) {
+ ipoctal->error_flag[channel] |= UART_OVERRUN;
+ ipoctal->chan_stats[channel].overrun_err++;
+ /* Overrun doesn't affect the current character*/
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ }
+ if (sr & SR_PARITY_ERROR) {
+ ipoctal->error_flag[channel] |= UART_PARITY;
+ ipoctal->chan_stats[channel].parity_err++;
+ flag = TTY_PARITY;
+ }
+ if (sr & SR_FRAMING_ERROR) {
+ ipoctal->error_flag[channel] |= UART_FRAMING;
+ ipoctal->chan_stats[channel].framing_err++;
+ flag = TTY_FRAME;
+ }
+ if (sr & SR_RECEIVED_BREAK) {
+ ipoctal->error_flag[channel] |= UART_BREAK;
+ ipoctal->chan_stats[channel].rcv_break++;
+ flag = TTY_BREAK;
+ }
+ }
+
+ tty_insert_flip_char(tty, value, flag);
+ }
+
+ /* TX of each character */
+ if (isr_tx_rdy && (sr & SR_TX_READY)) {
+ unsigned int *pointer_write = &ipoctal->pointer_write[channel];
+
+ if (ipoctal->nb_bytes[channel] <= 0) {
+ ipoctal->nb_bytes[channel] = 0;
+ continue;
+ }
+ spin_lock(&ipoctal->lock[channel]);
+ value = ipoctal->buffer[channel][*pointer_write];
+ ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.thr, value);
+ ipoctal->chan_stats[channel].tx++;
+ ipoctal->count_wr[channel]++;
+ (*pointer_write)++;
+ *pointer_write = *pointer_write % PAGE_SIZE;
+ ipoctal->nb_bytes[channel]--;
+ spin_unlock(&ipoctal->lock[channel]);
+
+ if ((ipoctal->nb_bytes[channel] == 0) &&
+ (waitqueue_active(&ipoctal->queue[channel]))) {
+
+ if (ipoctal->board_id != IP_OCTAL_485_ID) {
+ ipoctal->write = 1;
+ wake_up_interruptible(&ipoctal->queue[channel]);
+ }
+ }
+ }
+
+ tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
+ }
+ return IRQ_HANDLED;
+}
+
+static int ipoctal_check_model(struct ipack_device *dev, unsigned char *id)
+{
+ unsigned char manufacturerID;
+ unsigned char board_id;
+
+ dev->ops->read8(dev,
+ IPACK_ID_SPACE,
+ IPACK_IDPROM_OFFSET_MANUFACTURER_ID,
+ &manufacturerID);
+ if (manufacturerID != IP_OCTAL_MANUFACTURER_ID)
+ return -ENODEV;
+
+ dev->ops->read8(dev,
+ IPACK_ID_SPACE,
+ IPACK_IDPROM_OFFSET_MODEL,
+ (unsigned char *)&board_id);
+
+ switch (board_id) {
+ case IP_OCTAL_232_ID:
+ case IP_OCTAL_422_ID:
+ case IP_OCTAL_485_ID:
+ *id = board_id;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static const struct tty_port_operations ipoctal_tty_port_ops = {
+ .dtr_rts = NULL,
+ .activate = ipoctal_port_activate,
+};
+
+static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr, unsigned int slot, unsigned int vector)
+{
+ int res = 0;
+ int i;
+ struct tty_driver *tty;
+ char name[20];
+ unsigned char board_id;
+
+ res = ipoctal->dev->ops->map_space(ipoctal->dev, 0, IPACK_ID_SPACE);
+ if (res) {
+ pr_err("Unable to map slot [%d:%d] ID space!\n", bus_nr, slot);
+ return res;
+ }
+
+ res = ipoctal_check_model(ipoctal->dev, &board_id);
+ if (res) {
+ ipoctal->dev->ops->unmap_space(ipoctal->dev, IPACK_ID_SPACE);
+ goto out_unregister_id_space;
+ }
+ ipoctal->board_id = board_id;
+
+ res = ipoctal->dev->ops->map_space(ipoctal->dev, 0, IPACK_IO_SPACE);
+ if (res) {
+ pr_err("Unable to map slot [%d:%d] IO space!\n", bus_nr, slot);
+ goto out_unregister_id_space;
+ }
+
+ res = ipoctal->dev->ops->map_space(ipoctal->dev, 0x8000, IPACK_MEM_SPACE);
+ if (res) {
+ pr_err("Unable to map slot [%d:%d] MEM space!\n", bus_nr, slot);
+ goto out_unregister_io_space;
+ }
+
+ /* Save the virtual address to access the registers easily */
+ ipoctal->chan_regs = (struct scc2698_channel *) ipoctal->dev->io_space.address;
+ ipoctal->block_regs = (struct scc2698_block *) ipoctal->dev->io_space.address;
+
+ /* Disable RX and TX before touching anything */
+ for (i = 0; i < NR_CHANNELS ; i++) {
+ ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[i].u.w.cr,
+ CR_DISABLE_RX | CR_DISABLE_TX);
+ }
+
+ for (i = 0; i < IP_OCTAL_NB_BLOCKS; i++) {
+ ipoctal_write_io_reg(ipoctal, &ipoctal->block_regs[i].u.w.acr, ACR_BRG_SET2);
+ ipoctal_write_io_reg(
+ ipoctal,
+ &ipoctal->block_regs[i].u.w.opcr,
+ OPCR_MPP_OUTPUT | OPCR_MPOa_RTSN | OPCR_MPOb_RTSN);
+ ipoctal_write_io_reg(
+ ipoctal,
+ &ipoctal->block_regs[i].u.w.imr,
+ IMR_TxRDY_A | IMR_RxRDY_FFULL_A | IMR_DELTA_BREAK_A |
+ IMR_TxRDY_B | IMR_RxRDY_FFULL_B | IMR_DELTA_BREAK_B);
+ }
+
+ /*
+ * IP-OCTAL has different addresses to copy its IRQ vector.
+ * Depending of the carrier these addresses are accesible or not.
+ * More info in the datasheet.
+ */
+ ipoctal->dev->ops->request_irq(ipoctal->dev,
+ vector,
+ ipoctal_irq_handler,
+ ipoctal);
+ ipoctal->dev->ops->write8(ipoctal->dev, IPACK_ID_SPACE, 0, vector);
+
+ /* Register the TTY device */
+
+ /* Each IP-OCTAL channel is a TTY port */
+ tty = alloc_tty_driver(NR_CHANNELS);
+
+ if (!tty) {
+ res = -ENOMEM;
+ goto out_unregister_slot_unmap;
+ }
+
+ /* Fill struct tty_driver with ipoctal data */
+ tty->owner = THIS_MODULE;
+ tty->driver_name = "ipoctal";
+ sprintf(name, "ipoctal.%d.%d.", bus_nr, slot);
+ tty->name = name;
+ tty->major = 0;
+
+ tty->minor_start = 0;
+ tty->type = TTY_DRIVER_TYPE_SERIAL;
+ tty->subtype = SERIAL_TYPE_NORMAL;
+ tty->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+ tty->init_termios = tty_std_termios;
+ tty->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ tty->init_termios.c_ispeed = 9600;
+ tty->init_termios.c_ospeed = 9600;
+
+ tty_set_operations(tty, &ipoctal_fops);
+ res = tty_register_driver(tty);
+ if (res) {
+ pr_err("Can't register tty driver.\n");
+ put_tty_driver(tty);
+ goto out_unregister_slot_unmap;
+ }
+
+ /* Save struct tty_driver for use it when uninstalling the device */
+ ipoctal->tty_drv = tty;
+
+ for (i = 0; i < NR_CHANNELS; i++) {
+ tty_port_init(&ipoctal->tty_port[i]);
+ tty_port_alloc_xmit_buf(&ipoctal->tty_port[i]);
+ ipoctal->tty_port[i].ops = &ipoctal_tty_port_ops;
+
+ ipoctal_reset_stats(&ipoctal->chan_stats[i]);
+ ipoctal->nb_bytes[i] = 0;
+ init_waitqueue_head(&ipoctal->queue[i]);
+ ipoctal->error_flag[i] = UART_NOERROR;
+
+ spin_lock_init(&ipoctal->lock[i]);
+ ipoctal->pointer_read[i] = 0;
+ ipoctal->pointer_write[i] = 0;
+ ipoctal->nb_bytes[i] = 0;
+ tty_register_device(tty, i, NULL);
+ /* Enable again the RX. TX will be enabled when there is something to send */
+ ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[i].u.w.cr,
+ CR_ENABLE_RX);
+ }
+
+ return 0;
+
+out_unregister_slot_unmap:
+ ipoctal->dev->ops->unmap_space(ipoctal->dev, IPACK_ID_SPACE);
+out_unregister_io_space:
+ ipoctal->dev->ops->unmap_space(ipoctal->dev, IPACK_IO_SPACE);
+out_unregister_id_space:
+ ipoctal->dev->ops->unmap_space(ipoctal->dev, IPACK_MEM_SPACE);
+ return res;
+}
+
+static inline int ipoctal_copy_write_buffer(struct ipoctal *ipoctal, unsigned int channel, const unsigned char *buf, int count)
+{
+ unsigned long flags;
+ int i;
+ unsigned int *pointer_read = &ipoctal->pointer_read[channel];
+
+ /* Copy the bytes from the user buffer to the internal one */
+ for (i = 0; i < count; i++) {
+ if (i <= (PAGE_SIZE - ipoctal->nb_bytes[channel])) {
+ spin_lock_irqsave(&ipoctal->lock[channel], flags);
+ ipoctal->tty_port[channel].xmit_buf[*pointer_read] = buf[i];
+ *pointer_read = (*pointer_read + 1) % PAGE_SIZE;
+ ipoctal->nb_bytes[channel]++;
+ spin_unlock_irqrestore(&ipoctal->lock[channel], flags);
+ } else {
+ break;
+ }
+ }
+ return i;
+}
+
+static int ipoctal_write(struct ipoctal *ipoctal, unsigned int channel, const unsigned char *buf, int count)
+{
+ ipoctal->nb_bytes[channel] = 0;
+ ipoctal->count_wr[channel] = 0;
+
+ ipoctal_copy_write_buffer(ipoctal, channel, buf, count);
+
+ ipoctal->error_flag[channel] = UART_NOERROR;
+
+ /* As the IP-OCTAL 485 only supports half duplex, do it manually */
+ if (ipoctal->board_id == IP_OCTAL_485_ID) {
+ ipoctal_write_io_reg(ipoctal,
+ &ipoctal->chan_regs[channel].u.w.cr,
+ CR_DISABLE_RX);
+ ipoctal_write_cr_cmd(ipoctal,
+ &ipoctal->chan_regs[channel].u.w.cr,
+ CR_CMD_ASSERT_RTSN);
+ }
+
+ /*
+ * Send a packet and then disable TX to avoid failure after several send
+ * operations
+ */
+ ipoctal_write_io_reg(ipoctal,
+ &ipoctal->chan_regs[channel].u.w.cr,
+ CR_ENABLE_TX);
+ wait_event_interruptible(ipoctal->queue[channel], ipoctal->write);
+ ipoctal_write_io_reg(ipoctal,
+ &ipoctal->chan_regs[channel].u.w.cr,
+ CR_DISABLE_TX);
+
+ ipoctal->write = 0;
+ return ipoctal->count_wr[channel];
+}
+
+static int ipoctal_write_tty(struct tty_struct *tty, const unsigned char *buf, int count)
+{
+ unsigned int channel = tty->index;
+ struct ipoctal *ipoctal = tty->driver_data;
+
+ return ipoctal_write(ipoctal, channel, buf, count);
+}
+
+int ipoctal_write_room(struct tty_struct *tty)
+{
+ int channel = tty->index;
+ struct ipoctal *ipoctal = tty->driver_data;
+
+ return PAGE_SIZE - ipoctal->nb_bytes[channel];
+}
+
+int ipoctal_chars_in_buffer(struct tty_struct *tty)
+{
+ int channel = tty->index;
+ struct ipoctal *ipoctal = tty->driver_data;
+
+ return ipoctal->nb_bytes[channel];
+}
+
+void ipoctal_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
+{
+ unsigned int cflag;
+ unsigned char mr1 = 0;
+ unsigned char mr2 = 0;
+ unsigned char csr = 0;
+ unsigned int channel = tty->index;
+ struct ipoctal *ipoctal = tty->driver_data;
+ speed_t baud;
+
+ cflag = tty->termios->c_cflag;
+
+ /* Disable and reset everything before change the setup */
+ ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+ CR_DISABLE_RX | CR_DISABLE_TX);
+ ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+ CR_CMD_RESET_RX);
+ ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+ CR_CMD_RESET_TX);
+ ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+ CR_CMD_RESET_ERR_STATUS);
+ ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+ CR_CMD_RESET_MR);
+
+ /* Set Bits per chars */
+ switch (cflag & CSIZE) {
+ case CS6:
+ mr1 |= MR1_CHRL_6_BITS;
+ break;
+ case CS7:
+ mr1 |= MR1_CHRL_7_BITS;
+ break;
+ case CS8:
+ default:
+ mr1 |= MR1_CHRL_8_BITS;
+ /* By default, select CS8 */
+ tty->termios->c_cflag = (cflag & ~CSIZE) | CS8;
+ break;
+ }
+
+ /* Set Parity */
+ if (cflag & PARENB)
+ if (cflag & PARODD)
+ mr1 |= MR1_PARITY_ON | MR1_PARITY_ODD;
+ else
+ mr1 |= MR1_PARITY_ON | MR1_PARITY_EVEN;
+ else
+ mr1 |= MR1_PARITY_OFF;
+
+ /* Mark or space parity is not supported */
+ tty->termios->c_cflag &= ~CMSPAR;
+
+ /* Set stop bits */
+ if (cflag & CSTOPB)
+ mr2 |= MR2_STOP_BITS_LENGTH_2;
+ else
+ mr2 |= MR2_STOP_BITS_LENGTH_1;
+
+ /* Set the flow control */
+ switch (ipoctal->board_id) {
+ case IP_OCTAL_232_ID:
+ if (cflag & CRTSCTS) {
+ mr1 |= MR1_RxRTS_CONTROL_ON;
+ mr2 |= MR2_TxRTS_CONTROL_OFF | MR2_CTS_ENABLE_TX_ON;
+ ipoctal->chan_config[channel].flow_control = 1;
+ } else {
+ mr1 |= MR1_RxRTS_CONTROL_OFF;
+ mr2 |= MR2_TxRTS_CONTROL_OFF | MR2_CTS_ENABLE_TX_OFF;
+ ipoctal->chan_config[channel].flow_control = 0;
+ }
+ break;
+ case IP_OCTAL_422_ID:
+ mr1 |= MR1_RxRTS_CONTROL_OFF;
+ mr2 |= MR2_TxRTS_CONTROL_OFF | MR2_CTS_ENABLE_TX_OFF;
+ ipoctal->chan_config[channel].flow_control = 0;
+ break;
+ case IP_OCTAL_485_ID:
+ mr1 |= MR1_RxRTS_CONTROL_OFF;
+ mr2 |= MR2_TxRTS_CONTROL_ON | MR2_CTS_ENABLE_TX_OFF;
+ ipoctal->chan_config[channel].flow_control = 0;
+ break;
+ default:
+ return;
+ break;
+ }
+
+ baud = tty_get_baud_rate(tty);
+ tty_termios_encode_baud_rate(tty->termios, baud, baud);
+
+ /* Set baud rate */
+ switch (tty->termios->c_ospeed) {
+ case 75:
+ csr |= TX_CLK_75 | RX_CLK_75;
+ break;
+ case 110:
+ csr |= TX_CLK_110 | RX_CLK_110;
+ break;
+ case 150:
+ csr |= TX_CLK_150 | RX_CLK_150;
+ break;
+ case 300:
+ csr |= TX_CLK_300 | RX_CLK_300;
+ break;
+ case 600:
+ csr |= TX_CLK_600 | RX_CLK_600;
+ break;
+ case 1200:
+ csr |= TX_CLK_1200 | RX_CLK_1200;
+ break;
+ case 1800:
+ csr |= TX_CLK_1800 | RX_CLK_1800;
+ break;
+ case 2000:
+ csr |= TX_CLK_2000 | RX_CLK_2000;
+ break;
+ case 2400:
+ csr |= TX_CLK_2400 | RX_CLK_2400;
+ break;
+ case 4800:
+ csr |= TX_CLK_4800 | RX_CLK_4800;
+ break;
+ case 9600:
+ csr |= TX_CLK_9600 | RX_CLK_9600;
+ break;
+ case 19200:
+ csr |= TX_CLK_19200 | RX_CLK_19200;
+ break;
+ case 38400:
+ default:
+ csr |= TX_CLK_38400 | RX_CLK_38400;
+ /* In case of default, we establish 38400 bps */
+ tty_termios_encode_baud_rate(tty->termios, 38400, 38400);
+ break;
+ }
+
+ mr1 |= MR1_ERROR_CHAR;
+ mr1 |= MR1_RxINT_RxRDY;
+
+ /* Write the control registers */
+ ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.mr, mr1);
+ ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.mr, mr2);
+ ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.csr, csr);
+
+ /* save the setup in the structure */
+ ipoctal->chan_config[channel].baud = tty_get_baud_rate(tty);
+ ipoctal->chan_config[channel].bits_per_char = cflag & CSIZE;
+ ipoctal->chan_config[channel].parity = cflag & PARENB;
+ ipoctal->chan_config[channel].stop_bits = cflag & CSTOPB;
+
+ /* Enable again the RX */
+ ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+ CR_ENABLE_RX);
+}
+
+static void ipoctal_hangup(struct tty_struct *tty)
+{
+ unsigned long flags;
+ int channel = tty->index;
+ struct ipoctal *ipoctal = tty->driver_data;
+
+ if (ipoctal == NULL)
+ return;
+
+ spin_lock_irqsave(&ipoctal->lock[channel], flags);
+ ipoctal->nb_bytes[channel] = 0;
+ ipoctal->pointer_read[channel] = 0;
+ ipoctal->pointer_write[channel] = 0;
+ spin_unlock_irqrestore(&ipoctal->lock[channel], flags);
+
+ tty_port_hangup(&ipoctal->tty_port[channel]);
+
+ ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+ CR_DISABLE_RX | CR_DISABLE_TX);
+ ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+ CR_CMD_RESET_RX);
+ ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+ CR_CMD_RESET_TX);
+ ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+ CR_CMD_RESET_ERR_STATUS);
+ ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+ CR_CMD_RESET_MR);
+
+ clear_bit(ASYNCB_INITIALIZED, &ipoctal->tty_port[channel].flags);
+ wake_up_interruptible(&ipoctal->tty_port[channel].open_wait);
+}
+
+static const struct tty_operations ipoctal_fops = {
+ .ioctl = NULL,
+ .open = ipoctal_open,
+ .close = ipoctal_close,
+ .write = ipoctal_write_tty,
+ .set_termios = ipoctal_set_termios,
+ .write_room = ipoctal_write_room,
+ .chars_in_buffer = ipoctal_chars_in_buffer,
+ .get_icount = ipoctal_get_icount,
+ .hangup = ipoctal_hangup,
+};
+
+int ipoctal_match(struct ipack_device *dev)
+{
+ int res;
+ unsigned char board_id;
+
+ res = dev->ops->map_space(dev, 0, IPACK_ID_SPACE);
+ if (res)
+ return res;
+
+ res = ipoctal_check_model(dev, &board_id);
+ dev->ops->unmap_space(dev, IPACK_ID_SPACE);
+ return res;
+}
+
+int ipoctal_probe(struct ipack_device *dev)
+{
+ int res;
+ struct ipoctal *ipoctal;
+
+ ipoctal = kzalloc(sizeof(struct ipoctal), GFP_KERNEL);
+ if (ipoctal == NULL)
+ return -ENOMEM;
+
+ ipoctal->dev = dev;
+ res = ipoctal_inst_slot(ipoctal,
+ dev->bus_nr,
+ dev->slot,
+ dev->irq);
+ if (res)
+ goto out_uninst;
+
+ list_add_tail(&ipoctal->list, &ipoctal_list);
+ return 0;
+
+out_uninst:
+ kfree(ipoctal);
+ return res;
+}
+
+static void __ipoctal_remove(struct ipoctal *ipoctal)
+{
+ int i;
+
+ for (i = 0; i < NR_CHANNELS; i++) {
+ tty_unregister_device(ipoctal->tty_drv, i);
+ tty_port_free_xmit_buf(&ipoctal->tty_port[i]);
+ }
+
+ tty_unregister_driver(ipoctal->tty_drv);
+ put_tty_driver(ipoctal->tty_drv);
+
+ /* Tell the carrier board to free all the resources for this device */
+ ipoctal->dev->ops->remove_device(ipoctal->dev);
+
+ list_del(&ipoctal->list);
+ kfree(ipoctal);
+}
+
+void ipoctal_remove(struct ipack_device *device)
+{
+ struct ipoctal *ipoctal, *next;
+
+ list_for_each_entry_safe(ipoctal, next, &ipoctal_list, list) {
+ if (ipoctal->dev == device)
+ __ipoctal_remove(ipoctal);
+ }
+}
+
+struct ipack_driver_ops ipoctal_drv_ops = {
+ .match = ipoctal_match,
+ .probe = ipoctal_probe,
+ .remove = ipoctal_remove,
+};
+
+static int __init ipoctal_init(void)
+{
+ driver.owner = THIS_MODULE;
+ driver.ops = &ipoctal_drv_ops;
+ driver.driver.name = KBUILD_MODNAME;
+ ipack_driver_register(&driver);
+ return 0;
+}
+
+static void __exit ipoctal_exit(void)
+{
+ struct ipoctal *p, *next;
+
+ list_for_each_entry_safe(p, next, &ipoctal_list, list)
+ __ipoctal_remove(p);
+
+ ipack_driver_unregister(&driver);
+}
+
+MODULE_DESCRIPTION("IP-Octal 232, 422 and 485 device driver");
+MODULE_LICENSE("GPL");
+
+module_init(ipoctal_init);
+module_exit(ipoctal_exit);
diff --git a/drivers/staging/ipack/devices/ipoctal.h b/drivers/staging/ipack/devices/ipoctal.h
new file mode 100644
index 0000000..7c5d211
--- /dev/null
+++ b/drivers/staging/ipack/devices/ipoctal.h
@@ -0,0 +1,81 @@
+/**
+ * ipoctal.h
+ *
+ * driver for the IPOCTAL boards
+ * Copyright (c) 2009 Nicolas Serafini, EIC2 SA
+ * Copyright (c) 2010,2011 Samuel Iglesias Gonsalvez <siglesia [at] cern>, CERN
+ * Copyright (c) 2012 Samuel Iglesias Gonsalvez <siglesias [at] igalia>, Igalia
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#ifndef _IPOCTAL_H
+#define _IPOCTAL_H_
+
+#define NR_CHANNELS 8
+#define IPOCTAL_MAX_BOARDS 16
+#define MAX_DEVICES (NR_CHANNELS * IPOCTAL_MAX_BOARDS)
+#define RELEVANT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+
+/**
+ * enum uart_parity_e - UART supported parity.
+ */
+enum uart_parity_e {
+ UART_NONE = 0,
+ UART_ODD = 1,
+ UART_EVEN = 2,
+};
+
+/**
+ * enum uart_error - UART error type
+ *
+ */
+enum uart_error {
+ UART_NOERROR = 0, /* No error during transmission */
+ UART_TIMEOUT = 1 << 0, /* Timeout error */
+ UART_OVERRUN = 1 << 1, /* Overrun error */
+ UART_PARITY = 1 << 2, /* Parity error */
+ UART_FRAMING = 1 << 3, /* Framing error */
+ UART_BREAK = 1 << 4, /* Received break */
+};
+
+/**
+ * struct ipoctal_config - Serial configuration
+ *
+ * @baud: Baud rate
+ * @stop_bits: Stop bits (1 or 2)
+ * @bits_per_char: data size in bits
+ * @parity
+ * @flow_control: Flow control management (RTS/CTS) (0 disabled, 1 enabled)
+ */
+struct ipoctal_config {
+ unsigned int baud;
+ unsigned int stop_bits;
+ unsigned int bits_per_char;
+ unsigned short parity;
+ unsigned int flow_control;
+};
+
+/**
+ * struct ipoctal_stats -- Stats since last reset
+ *
+ * @tx: Number of transmitted bytes
+ * @rx: Number of received bytes
+ * @overrun: Number of overrun errors
+ * @parity_err: Number of parity errors
+ * @framing_err: Number of framing errors
+ * @rcv_break: Number of break received
+ */
+struct ipoctal_stats {
+ unsigned long tx;
+ unsigned long rx;
+ unsigned long overrun_err;
+ unsigned long parity_err;
+ unsigned long framing_err;
+ unsigned long rcv_break;
+};
+
+#endif /* _IPOCTAL_H_ */
diff --git a/drivers/staging/ipack/devices/scc2698.h b/drivers/staging/ipack/devices/scc2698.h
new file mode 100644
index 0000000..e683019
--- /dev/null
+++ b/drivers/staging/ipack/devices/scc2698.h
@@ -0,0 +1,229 @@
+/*
+ * scc2698.h
+ *
+ * driver for the IPOCTAL boards
+ * Copyright (c) 2009 Nicolas Serafini, EIC2 SA
+ * Copyright (c) 2010,2011 Samuel Iglesias Gonsalvez <siglesia [at] cern>, CERN
+ * Copyright (c) 2012 Samuel Iglesias Gonsalvez <siglesias [at] igalia>, Igalia
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#ifndef SCC2698_H_
+#define SCC2698_H_
+
+/*
+ * struct scc2698_channel - Channel access to scc2698 IO
+ *
+ * dn value are only spacer.
+ *
+ */
+struct scc2698_channel {
+ union {
+ struct {
+ unsigned char d0, mr; /* Mode register 1/2*/
+ unsigned char d1, sr; /* Status register */
+ unsigned char d2, r1; /* reserved */
+ unsigned char d3, rhr; /* Receive holding register (R) */
+ unsigned char junk[8]; /* other crap for block control */
+ } r; /* Read access */
+ struct {
+ unsigned char d0, mr; /* Mode register 1/2 */
+ unsigned char d1, csr; /* Clock select register */
+ unsigned char d2, cr; /* Command register */
+ unsigned char d3, thr; /* Transmit holding register */
+ unsigned char junk[8]; /* other crap for block control */
+ } w; /* Write access */
+ } u;
+};
+
+/*
+ * struct scc2698_block - Block access to scc2698 IO
+ *
+ * The scc2698 contain 4 block.
+ * Each block containt two channel a and b.
+ * dn value are only spacer.
+ *
+ */
+struct scc2698_block {
+ union {
+ struct {
+ unsigned char d0, mra; /* Mode register 1/2 (a) */
+ unsigned char d1, sra; /* Status register (a) */
+ unsigned char d2, r1; /* reserved */
+ unsigned char d3, rhra; /* Receive holding register (a) */
+ unsigned char d4, ipcr; /* Input port change register of block */
+ unsigned char d5, isr; /* Interrupt status register of block */
+ unsigned char d6, ctur; /* Counter timer upper register of block */
+ unsigned char d7, ctlr; /* Counter timer lower register of block */
+ unsigned char d8, mrb; /* Mode register 1/2 (b) */
+ unsigned char d9, srb; /* Status register (b) */
+ unsigned char da, r2; /* reserved */
+ unsigned char db, rhrb; /* Receive holding register (b) */
+ unsigned char dc, r3; /* reserved */
+ unsigned char dd, ip; /* Input port register of block */
+ unsigned char de, ctg; /* Start counter timer of block */
+ unsigned char df, cts; /* Stop counter timer of block */
+ } r; /* Read access */
+ struct {
+ unsigned char d0, mra; /* Mode register 1/2 (a) */
+ unsigned char d1, csra; /* Clock select register (a) */
+ unsigned char d2, cra; /* Command register (a) */
+ unsigned char d3, thra; /* Transmit holding register (a) */
+ unsigned char d4, acr; /* Auxiliary control register of block */
+ unsigned char d5, imr; /* Interrupt mask register of block */
+ unsigned char d6, ctu; /* Counter timer upper register of block */
+ unsigned char d7, ctl; /* Counter timer lower register of block */
+ unsigned char d8, mrb; /* Mode register 1/2 (b) */
+ unsigned char d9, csrb; /* Clock select register (a) */
+ unsigned char da, crb; /* Command register (b) */
+ unsigned char db, thrb; /* Transmit holding register (b) */
+ unsigned char dc, r1; /* reserved */
+ unsigned char dd, opcr; /* Output port configuration register of block */
+ unsigned char de, r2; /* reserved */
+ unsigned char df, r3; /* reserved */
+ } w; /* Write access */
+ } u;
+} ;
+
+#define MR1_CHRL_5_BITS (0x0 << 0)
+#define MR1_CHRL_6_BITS (0x1 << 0)
+#define MR1_CHRL_7_BITS (0x2 << 0)
+#define MR1_CHRL_8_BITS (0x3 << 0)
+#define MR1_PARITY_EVEN (0x1 << 2)
+#define MR1_PARITY_ODD (0x0 << 2)
+#define MR1_PARITY_ON (0x0 << 3)
+#define MR1_PARITY_FORCE (0x1 << 3)
+#define MR1_PARITY_OFF (0x2 << 3)
+#define MR1_PARITY_SPECIAL (0x3 << 3)
+#define MR1_ERROR_CHAR (0x0 << 5)
+#define MR1_ERROR_BLOCK (0x1 << 5)
+#define MR1_RxINT_RxRDY (0x0 << 6)
+#define MR1_RxINT_FFULL (0x1 << 6)
+#define MR1_RxRTS_CONTROL_ON (0x1 << 7)
+#define MR1_RxRTS_CONTROL_OFF (0x0 << 7)
+
+#define MR2_STOP_BITS_LENGTH_1 (0x7 << 0)
+#define MR2_STOP_BITS_LENGTH_2 (0xF << 0)
+#define MR2_CTS_ENABLE_TX_ON (0x1 << 4)
+#define MR2_CTS_ENABLE_TX_OFF (0x0 << 4)
+#define MR2_TxRTS_CONTROL_ON (0x1 << 5)
+#define MR2_TxRTS_CONTROL_OFF (0x0 << 5)
+#define MR2_CH_MODE_NORMAL (0x0 << 6)
+#define MR2_CH_MODE_ECHO (0x1 << 6)
+#define MR2_CH_MODE_LOCAL (0x2 << 6)
+#define MR2_CH_MODE_REMOTE (0x3 << 6)
+
+#define CR_ENABLE_RX (0x1 << 0)
+#define CR_DISABLE_RX (0x1 << 1)
+#define CR_ENABLE_TX (0x1 << 2)
+#define CR_DISABLE_TX (0x1 << 3)
+#define CR_CMD_RESET_MR (0x1 << 4)
+#define CR_CMD_RESET_RX (0x2 << 4)
+#define CR_CMD_RESET_TX (0x3 << 4)
+#define CR_CMD_RESET_ERR_STATUS (0x4 << 4)
+#define CR_CMD_RESET_BREAK_CHANGE (0x5 << 4)
+#define CR_CMD_START_BREAK (0x6 << 4)
+#define CR_CMD_STOP_BREAK (0x7 << 4)
+#define CR_CMD_ASSERT_RTSN (0x8 << 4)
+#define CR_CMD_NEGATE_RTSN (0x9 << 4)
+#define CR_CMD_SET_TIMEOUT_MODE (0xA << 4)
+#define CR_CMD_DISABLE_TIMEOUT_MODE (0xC << 4)
+
+#define SR_RX_READY (0x1 << 0)
+#define SR_FIFO_FULL (0x1 << 1)
+#define SR_TX_READY (0x1 << 2)
+#define SR_TX_EMPTY (0x1 << 3)
+#define SR_OVERRUN_ERROR (0x1 << 4)
+#define SR_PARITY_ERROR (0x1 << 5)
+#define SR_FRAMING_ERROR (0x1 << 6)
+#define SR_RECEIVED_BREAK (0x1 << 7)
+
+#define SR_ERROR (0xF0)
+
+#define ACR_DELTA_IP0_IRQ_EN (0x1 << 0)
+#define ACR_DELTA_IP1_IRQ_EN (0x1 << 1)
+#define ACR_DELTA_IP2_IRQ_EN (0x1 << 2)
+#define ACR_DELTA_IP3_IRQ_EN (0x1 << 3)
+#define ACR_CT_Mask (0x7 << 4)
+#define ACR_CExt (0x0 << 4)
+#define ACR_CTxCA (0x1 << 4)
+#define ACR_CTxCB (0x2 << 4)
+#define ACR_CClk16 (0x3 << 4)
+#define ACR_TExt (0x4 << 4)
+#define ACR_TExt16 (0x5 << 4)
+#define ACR_TClk (0x6 << 4)
+#define ACR_TClk16 (0x7 << 4)
+#define ACR_BRG_SET1 (0x0 << 7)
+#define ACR_BRG_SET2 (0x1 << 7)
+
+#define TX_CLK_75 (0x0 << 0)
+#define TX_CLK_110 (0x1 << 0)
+#define TX_CLK_38400 (0x2 << 0)
+#define TX_CLK_150 (0x3 << 0)
+#define TX_CLK_300 (0x4 << 0)
+#define TX_CLK_600 (0x5 << 0)
+#define TX_CLK_1200 (0x6 << 0)
+#define TX_CLK_2000 (0x7 << 0)
+#define TX_CLK_2400 (0x8 << 0)
+#define TX_CLK_4800 (0x9 << 0)
+#define TX_CLK_1800 (0xA << 0)
+#define TX_CLK_9600 (0xB << 0)
+#define TX_CLK_19200 (0xC << 0)
+#define RX_CLK_75 (0x0 << 4)
+#define RX_CLK_110 (0x1 << 4)
+#define RX_CLK_38400 (0x2 << 4)
+#define RX_CLK_150 (0x3 << 4)
+#define RX_CLK_300 (0x4 << 4)
+#define RX_CLK_600 (0x5 << 4)
+#define RX_CLK_1200 (0x6 << 4)
+#define RX_CLK_2000 (0x7 << 4)
+#define RX_CLK_2400 (0x8 << 4)
+#define RX_CLK_4800 (0x9 << 4)
+#define RX_CLK_1800 (0xA << 4)
+#define RX_CLK_9600 (0xB << 4)
+#define RX_CLK_19200 (0xC << 4)
+
+#define OPCR_MPOa_RTSN (0x0 << 0)
+#define OPCR_MPOa_C_TO (0x1 << 0)
+#define OPCR_MPOa_TxC1X (0x2 << 0)
+#define OPCR_MPOa_TxC16X (0x3 << 0)
+#define OPCR_MPOa_RxC1X (0x4 << 0)
+#define OPCR_MPOa_RxC16X (0x5 << 0)
+#define OPCR_MPOa_TxRDY (0x6 << 0)
+#define OPCR_MPOa_RxRDY_FF (0x7 << 0)
+
+#define OPCR_MPOb_RTSN (0x0 << 4)
+#define OPCR_MPOb_C_TO (0x1 << 4)
+#define OPCR_MPOb_TxC1X (0x2 << 4)
+#define OPCR_MPOb_TxC16X (0x3 << 4)
+#define OPCR_MPOb_RxC1X (0x4 << 4)
+#define OPCR_MPOb_RxC16X (0x5 << 4)
+#define OPCR_MPOb_TxRDY (0x6 << 4)
+#define OPCR_MPOb_RxRDY_FF (0x7 << 4)
+
+#define OPCR_MPP_INPUT (0x0 << 7)
+#define OPCR_MPP_OUTPUT (0x1 << 7)
+
+#define IMR_TxRDY_A (0x1 << 0)
+#define IMR_RxRDY_FFULL_A (0x1 << 1)
+#define IMR_DELTA_BREAK_A (0x1 << 2)
+#define IMR_COUNTER_READY (0x1 << 3)
+#define IMR_TxRDY_B (0x1 << 4)
+#define IMR_RxRDY_FFULL_B (0x1 << 5)
+#define IMR_DELTA_BREAK_B (0x1 << 6)
+#define IMR_INPUT_PORT_CHANGE (0x1 << 7)
+
+#define ISR_TxRDY_A (0x1 << 0)
+#define ISR_RxRDY_FFULL_A (0x1 << 1)
+#define ISR_DELTA_BREAK_A (0x1 << 2)
+#define ISR_COUNTER_READY (0x1 << 3)
+#define ISR_TxRDY_B (0x1 << 4)
+#define ISR_RxRDY_FFULL_B (0x1 << 5)
+#define ISR_DELTA_BREAK_B (0x1 << 6)
+#define ISR_INPUT_PORT_CHANGE (0x1 << 7)
+
+#endif /* SCC2698_H_ */
--
1.7.10

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo [at] vger
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Linux kernel RSS feed   Index | Next | Previous | View Threaded
 
 


Interested in having your list archived? Contact Gossamer Threads
 
  Web Applications & Managed Hosting Powered by Gossamer Threads Inc.