bzolnier at gmail
Nov 4, 2009, 9:35 AM
Post #1 of 3
(178 views)
Permalink
|
|
[PATCH 30/41] rt2800usb: fix comments in rt2800usb.h
|
|
From: Bartlomiej Zolnierkiewicz <bzolnier [at] gmail>
Subject: [PATCH] rt2800usb: fix comments in rt2800usb.h
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier [at] gmail>
---
drivers/net/wireless/rt2x00/rt2800usb.h | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
Index: b/drivers/net/wireless/rt2x00/rt2800usb.h
===================================================================
--- a/drivers/net/wireless/rt2x00/rt2800usb.h
+++ b/drivers/net/wireless/rt2x00/rt2800usb.h
@@ -61,7 +61,7 @@
/*
* Signal information.
- * Defaul offset is required for RSSI <-> dBm conversion.
+ * Default offset is required for RSSI <-> dBm conversion.
*/
#define DEFAULT_RSSI_OFFSET 120 /* FIXME */
@@ -87,12 +87,6 @@
*/
/*
- * HOST-MCU shared memory
- */
-#define HOST_CMD_CSR 0x0404
-#define HOST_CMD_CSR_HOST_COMMAND FIELD32(0x000000ff)
-
-/*
* INT_SOURCE_CSR: Interrupt source register.
* Write one to clear corresponding bit.
* TX_FIFO_STATUS: FIFO Statistics is full, sw should read 0x171c
@@ -351,6 +345,12 @@
#define PBF_SYS_CTRL_HOST_RAM_WRITE FIELD32(0x00010000)
/*
+ * HOST-MCU shared memory
+ */
+#define HOST_CMD_CSR 0x0404
+#define HOST_CMD_CSR_HOST_COMMAND FIELD32(0x000000ff)
+
+/*
* PBF registers
* Most are for debug. Driver doesn't touch PBF register.
*/
@@ -1776,7 +1776,7 @@ struct mac_iveiv_entry {
/*
* Word3
- * WIV: Wireless Info Valid. 1: Driver filled WI, 0: DMA needs to copy WI
+ * WIV: Wireless Info Valid. 1: Driver filled WI, 0: DMA needs to copy WI
* QSEL: Select on-chip FIFO ID for 2nd-stage output scheduler.
* 0:MGMT, 1:HCCA 2:EDCA
*/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo [at] vger
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
|
