peter.schneider at schneideris
Feb 11, 2012, 2:44 PM
Views: 1043
Permalink
|
Thanks Andy,
You are THE MAN!!!! From the v4l2-ctl command I now have the analog working on both tuners for the 500 and now on the HVR-1600!!!
I am concerned about the HVR-2250 but that will be a debug to happen when I have an antenna built. At that time I can use the HVR-1600 digital tuner to test the antenna and then engage the HVR-2250.
Thanks again Andy.
-Peter
On 2012-02-11, at 3:02 PM, Andy Walls wrote:
> On Sat, 2012-02-11 at 11:02 -0700, Gmail wrote:
>> Hi All,
>>
>>
>> I am hoping someone can help me with some trouble shooting that I am
>> doing. I have a box with three Hauppauge cards installed (PVR-500,
>> HVR-2250, and the latest is a HVR 1600). Though I have the 2250
>> installed I have not built my antenna as of yet to bring it online.
>> My PVR-500 used to work with both tuners but then a couple years ago
>> the second unit just stopped working (no idea why and assumed over
>> time, after lots of attempts to try and revive, that it was just
>> dead). I happened across the HVR-1600 yesterday and thought it would
>> make a good addition for the second Analog tuner that I lost. The
>> problem is that it is providing the same static feed as the second
>> tuner from the PVR-500. After looking at the logs I am starting to
>> wonder if the problemI have is a firmware bug or something else and
>> could use some help. The reason I am turning to this list is because
>> of a line in the syslog in what appears to be the ivtv sequence.
>>
>>
>> Note: The Analog tuners are being used to capture video through the
>> s-video cable from my satellite tuners and the digital ones are for
>> future OTA HD.
>
> Please install v4l2-ctl (probably in a v4l2-utils package) and mplayer.
>
> Kill the mythbackend, if it is running.
>
> Then run v4l2-ctl --list-devices, to see what card corresponds to which
> devices nodes. For example:
>
> $ v4l2-ctl --list-devices
> Hauppauge HVR-1600 (PCI:0000:03:00.0):
> /dev/video0
> /dev/video24
> /dev/video32
> /dev/vbi0
>
> Hauppauge WinTV PVR-150 (PCI:0000:03:01.0):
> /dev/video2
> /dev/video26
> /dev/video34
> /dev/radio2
> /dev/vbi2
>
> Hauppauge HVR-1600 (PCI:0000:03:02.0):
> /dev/video1
> /dev/video25
> /dev/video33
> /dev/radio1
> /dev/vbi1
>
> On a device from which you wish to capture S-Video, set the proper input
> and analog TV standard using v4l2-ctl:
>
> $ v4l2-ctl -d /dev/video0 --list-inputs
> ioctl: VIDIOC_ENUMINPUT
> Input : 0
> Name : Tuner 1
> Type : 0x00000001
> Audioset : 0x00000007
> Tuner : 0x00000000
> Standard : 0x0000000000001000 (NTSC-M)
> Status : 0x00000000 (ok)
> Capabilities: 0x00000004 (SD presets)
>
> Input : 1
> Name : S-Video 1
> Type : 0x00000002
> Audioset : 0x00000007
> Tuner : 0x00000000
> Standard : 0x0000000000FFFFFF (PAL-B/B1/G/H/I/D/D1/K/M/N/Nc/60 NTSC-M/M-JP/443/M-KR SECAM-B/D/G/H/K/K1/L/Lc)
> Status : 0x00000000 (ok)
> Capabilities: 0x00000004 (SD presets)
>
> Input : 2
> Name : Composite 1
> Type : 0x00000002
> Audioset : 0x00000007
> Tuner : 0x00000000
> Standard : 0x0000000000FFFFFF (PAL-B/B1/G/H/I/D/D1/K/M/N/Nc/60 NTSC-M/M-JP/443/M-KR SECAM-B/D/G/H/K/K1/L/Lc)
> Status : 0x00000000 (ok)
> Capabilities: 0x00000004 (SD presets)
> [...]
>
> $ v4l2-ctl -d /dev/video0 --set-input=1
> Video input set to 1 (S-Video 1: ok)
>
> $ v4l2-ctl -d /dev/video0 --list-standards
> ioctl: VIDIOC_ENUMSTD
> Index : 0
> ID : 0x000000000000B000
> Name : NTSC
> Frame period: 1001/30000
> Frame lines : 525
>
> Index : 1
> ID : 0x0000000000001000
> Name : NTSC-M
> Frame period: 1001/30000
> Frame lines : 525
> [...]
>
> $ v4l2-ctl -d /dev/video0 --set-standard=1
> Standard set to 00001000
>
>
> Turn on your S-Video source, and then just capture an MPEG live with mplayer:
>
> $ mplayer /dev/video0 -cache 8192
>
> or capture a file for later playback
>
> $ cat /dev/video0 > foo.mpg
> ^C
> $ mplayer foo.mpg
>
>
>
>> Here is what I see on the two problematic analog tuners.
>
> Looks like an untuned tuner input driving the encoder, not S-Video. An
> S-Video input that is connected but has no signal is usually a solid
> grey or black screen.
>
>>
>> Here is some background information:
>
>> and:
>>
>>
>> cat /var/log/syslog|grep cx18
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.465299] cx18: Start initialization, version 1.5.0
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516868] cx18-0: Initializing card 0
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516871] cx18-0: Autodetected Hauppauge card
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.517062] cx18 0000:01:06.0: PCI INT A -> Link[LNKA] -> GSI 16 (level, low) -> IRQ 16
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.523272] cx18-0: cx23418 revision 01010000 (B)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.740991] cx18-0: Autodetected Hauppauge HVR-1600
>
> greping for 'cx18' will miss any error messages reltaed to the tuner
> chips and initialization. Anyway, the HVR-1600 lloks OK from what you
> provided.
>
>>
>> and what set my into this e-mail:
>>
>>
>>
>>
>>
>>
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.371758] Linux video capture interface: v2.00
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.382727] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.449074] ivtv: Start initialization, version 1.4.2
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.453711] parport_pc 00:05: reported by Plug and Play ACPI
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.453762] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.456724] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
>
> Your computer's BIOS has an ACPI bug that is unrelated to the video
> capture cards, AFAICT.
>
>
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.457016] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:12/LNXVIDEO:00/input/input5
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.457108] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.458546] ivtv0: Initializing card 0
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.458552] ivtv0: Autodetected Hauppauge card (cx23416 based)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.461226] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 17
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.461251] ivtv 0000:02:08.0: PCI INT A -> Link[LNKB] -> GSI 17 (level, low) -> IRQ 17
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.465299] cx18: Start initialization, version 1.5.0
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516569] tveeprom 2-0050: Hauppauge model 23552, rev E792, serial# 10603908
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516572] tveeprom 2-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516575] tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516577] tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516580] tveeprom 2-0050: audio processor is CX25843 (idx 37)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516582] tveeprom 2-0050: decoder processor is CX25843 (idx 30)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516584] tveeprom 2-0050: has radio
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516586] ivtv0: Autodetected WinTV PVR 500 (unit #1)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516630] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516635] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516789] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516793] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516795] hda_intel: Disabling MSI
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516818] HDA Intel 0000:00:07.0: setting latency timer to 64
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516868] cx18-0: Initializing card 0
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516871] cx18-0: Autodetected Hauppauge card
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.517047] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 16
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.517062] cx18 0000:01:06.0: PCI INT A -> Link[LNKA] -> GSI 16 (level, low) -> IRQ 16
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.523272] cx18-0: cx23418 revision 01010000 (B)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.527518] cx25840 2-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.552242] lp0: using parport0 (interrupt-driven).
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.559592] i2c-core: driver [tuner] using legacy suspend method
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.559595] i2c-core: driver [tuner] using legacy resume method
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.571404] tea5767 2-0060: type set to Philips TEA5767HN FM Radio
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.572716] tuner 2-0060: Tuner 62 found with type(s) Radio.
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.647194] tda9887 2-0043: creating new instance
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.647198] tda9887 2-0043: tda988[5/6/7] found
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.648262] tuner 2-0043: Tuner 74 found with type(s) Radio TV.
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.649550] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.661166] tuner 2-0061: Tuner -1 found with type(s) TV.
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.661266] MCE: In-kernel MCE decoding enabled.
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.662420] EDAC MC: Ver: 2.1.0
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.667708] AMD64 EDAC driver v3.4.0
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.669263] wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.679969] type=1400 audit(1328977336.392:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=765 comm="apparmor_parser"
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.680434] type=1400 audit(1328977336.396:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=765 comm="apparmor_parser"
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.680697] type=1400 audit(1328977336.396:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=765 comm="apparmor_parser"
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.683264] type=1400 audit(1328977336.396:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=786 comm="apparmor_parser"
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.691569] saa7164 driver loaded
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.695133] saa7164 0000:05:00.0: PCI INT A -> Link[LN2A] -> GSI 18 (level, low) -> IRQ 18
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.695958] CORE saa7164[0]: subsystem: 0070:8851, board: Hauppauge WinTV-HVR2250 [card=7,autodetected]
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.695962] saa7164[0]/0: found at 0000:05:00.0, rev: 129, irq: 18, latency: 0, mmio: 0xfe800000
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.695968] saa7164 0000:05:00.0: setting latency timer to 64
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.698088] tuner-simple 2-0061: creating new instance
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.698093] tuner-simple 2-0061: type set to 57 (Philips FQ1236A MK4)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.699764] ivtv0: Registered device video0 for encoder MPG (4096 kB)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.699792] ivtv0: Registered device video32 for encoder YUV (2048 kB)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.699818] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.699841] ivtv0: Registered device video24 for encoder PCM (320 kB)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.699866] ivtv0: Registered device radio0 for encoder radio
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.699868] ivtv0: Initialized card: WinTV PVR 500 (unit #1)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.740974] tveeprom 3-0050: Hauppauge model 74041, rev C6G8, serial# 7255283
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.740977] tveeprom 3-0050: MAC address is 00:0d:fe:6e:b4:f3
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.740979] tveeprom 3-0050: tuner model is TCL M30WTP-4N-E (idx 168, type 85)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.740982] tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.740984] tveeprom 3-0050: audio processor is CX23418 (idx 38)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.740986] tveeprom 3-0050: decoder processor is CX23418 (idx 31)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.740988] tveeprom 3-0050: has no radio, has IR receiver, has IR transmitter
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.740991] cx18-0: Autodetected Hauppauge HVR-1600
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.740993] cx18-0: Simultaneous Digital and Analog TV capture supported
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.748153] ivtv1: Initializing card 1
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.748158] ivtv1: Autodetected Hauppauge card (cx23416 based)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.749970] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.749978] ivtv 0000:02:09.0: PCI INT A -> Link[LNKC] -> GSI 19 (level, low) -> IRQ 19
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.805055] tveeprom 5-0050: Hauppauge model 23552, rev E792, serial# 10603908
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.805058] tveeprom 5-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.805060] tveeprom 5-0050: TV standards NTSC(M) (eeprom 0x08)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.805063] tveeprom 5-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.805065] tveeprom 5-0050: audio processor is CX25843 (idx 37)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.805067] tveeprom 5-0050: decoder processor is CX25843 (idx 30)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.805069] tveeprom 5-0050: has radio
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.805071] ivtv1: Correcting tveeprom data: no radio present on second unit
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.805073] ivtv1: Autodetected WinTV PVR 500 (unit #2)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.811719] cx25840 5-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #1)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.833014] tda9887 5-0043: creating new instance
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.833017] tda9887 5-0043: tda988[5/6/7] found
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.834052] tuner 5-0043: Tuner 74 found with type(s) Radio TV.
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.839893] tuner 5-0061: Tuner -1 found with type(s) Radio TV.
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.845534] wm8775 5-001b: chip found @ 0x36 (ivtv i2c driver #1)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.863936] tuner-simple 5-0061: creating new instance
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.863940] tuner-simple 5-0061: type set to 57 (Philips FQ1236A MK4)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.865665] ivtv1: Registered device video1 for encoder MPG (4096 kB)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.865692] ivtv1: Registered device video33 for encoder YUV (2048 kB)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.865717] ivtv1: Registered device vbi1 for encoder VBI (1024 kB)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.865743] ivtv1: Registered device video25 for encoder PCM (320 kB)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.865745] ivtv1: Initialized card: WinTV PVR 500 (unit #2)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.865799] ivtv: End initialization
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.913467] tda9887 4-0043: creating new instance
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.913470] tda9887 4-0043: tda988[5/6/7] found
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.914339] tuner 4-0043: Tuner 74 found with type(s) Radio TV.
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.920094] tuner 4-0061: Tuner -1 found with type(s) Radio TV.
>
> Every thing appears OK for ivtv and cx18.
>
>
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.944043] saa7164_downloadfirmware() no first image
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.944055] saa7164_downloadfirmware() Waiting for firmware upload (NXP7164-2010-03-10.1.fw)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.964660] JFS: nTxBlock = 8192, nTxLock = 65536
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.982069] cs5345 3-004c: chip found @ 0x98 (cx18 i2c driver #0-0)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.986133] tuner-simple 4-0061: creating new instance
>> Feb 11 09:22:21 mythtv-primary kernel: [ 12.986136] tuner-simple 4-0061: type set to 85 (Philips FQ1236 MK5)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 13.000831] cx18-0: Registered device video2 for encoder MPEG (64 x 32.00 kB)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 13.000839] DVB: registering new adapter (cx18)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 13.001366] ppdev: user-space parallel port driver
>> Feb 11 09:22:21 mythtv-primary kernel: [ 13.093375] saa7164_downloadfirmware() Upload failed. (file not found?)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 13.093380] Failed to boot firmware, no features registered
>
> Your HVR-2250 probably isn't going to work, given those messages about a
> missing firmware file.
>
>> Feb 11 09:22:21 mythtv-primary kernel: [ 13.250727] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 13.510643] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 13.673594] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 13.701587] ivtv1: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 13.772527] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
>> Feb 11 09:22:21 mythtv-primary kernel: [ 13.772807] EDAC amd64: DRAM ECC disabled.
>> Feb 11 09:22:21 mythtv-primary kernel: [ 13.772813] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
>> Feb 11 09:22:21 mythtv-primary kernel: [ 13.772814] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
>> Feb 11 09:22:21 mythtv-primary kernel: [ 13.772815] (Note that use of the override may cause unknown side effects.)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 13.872180] ivtv0: Encoder revision: 0x02060039
>> Feb 11 09:22:21 mythtv-primary kernel: [ 13.883339] MXL5005S: Attached at address 0x63
>> Feb 11 09:22:21 mythtv-primary kernel: [ 13.883344] DVB: registering adapter 0 frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)...
>> Feb 11 09:22:21 mythtv-primary kernel: [ 13.883461] cx18-0: DVB Frontend registered
>> Feb 11 09:22:21 mythtv-primary kernel: [ 13.883464] cx18-0: Registered DVB adapter0 for TS (32 x 32.00 kB)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 13.883501] cx18-0: Registered device video34 for encoder YUV (20 x 101.25 kB)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 13.883540] cx18-0: Registered device vbi2 for encoder VBI (20 x 51984 bytes)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 13.883567] cx18-0: Registered device video26 for encoder PCM audio (256 x 4.00 kB)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 13.883570] cx18-0: Initialized card: Hauppauge HVR-1600
>> Feb 11 09:22:21 mythtv-primary kernel: [ 13.883631] cx18: End initialization
>> Feb 11 09:22:21 mythtv-primary kernel: [ 13.900395] ivtv1: Encoder revision: 0x02060039
>> Feb 11 09:22:21 mythtv-primary kernel: [ 13.995615] cx18-alsa: module loading...
>> Feb 11 09:22:21 mythtv-primary kernel: [ 14.162692] cx18-0: loaded v4l-cx23418-cpu.fw firmware (158332 bytes)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 14.413193] cx18-0: loaded v4l-cx23418-apu.fw firmware V00120000 (141200 bytes)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 14.472491] cx18-0: FW version: 0.0.74.0 (Release 2007/03/12)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 15.305943] nvidia: module license 'NVIDIA' taints kernel.
>> Feb 11 09:22:21 mythtv-primary kernel: [ 15.305948] Disabling lock debugging due to kernel taint
>> Feb 11 09:22:21 mythtv-primary kernel: [ 15.543106] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 20
>> Feb 11 09:22:21 mythtv-primary kernel: [ 15.543114] nvidia 0000:03:00.0: PCI INT A -> Link[SGRU] -> GSI 20 (level, low) -> IRQ 20
>> Feb 11 09:22:21 mythtv-primary kernel: [ 15.543122] nvidia 0000:03:00.0: setting latency timer to 64
>> Feb 11 09:22:21 mythtv-primary kernel: [ 15.543127] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
>> Feb 11 09:22:21 mythtv-primary kernel: [ 15.544170] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 290.10 Wed Nov 16 17:39:29 PST 2011
>> Feb 11 09:22:21 mythtv-primary kernel: [ 15.738362] cx18-0 843: loaded v4l-cx23418-dig.fw firmware (16382 bytes)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 15.760120] cx18-0 843: verified load of v4l-cx23418-dig.fw firmware (16382 bytes)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 17.589877] cx25840 5-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
>> Feb 11 09:22:21 mythtv-primary kernel: [ 17.899715] RPC: Registered named UNIX socket transport module.
>>
>>
>> Can anyone tell me if I have an actual firmware bug or if this is
>> normal? Can anyone tell me how to test the card for sure to see if it
>> is a defective card?
>
> One last step is to verify that you do in fact have a video signal with
> a known good devices (such as a TV). If you have RF analog or RF
> digital reception problems, you may want to review this checklist as
> well:
>
> http://ivtvdriver.org/index.php/Howto:Improve_signal_quality
>
> Regards,
> Andy
>
>>
>> -Peter
>
>
>
> _______________________________________________
> ivtv-users mailing list
> ivtv-users [at] ivtvdriver
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
_______________________________________________
ivtv-users mailing list
ivtv-users [at] ivtvdriver
http://ivtvdriver.org/mailman/listinfo/ivtv-users
|
