Login | Register For Free | Help
Search for: (Advanced)

Mailing List Archive: ivtv: users

cx18 fails to load sh51409 with error -6 on HVR-1600

 

 

ivtv users RSS feed   Index | Next | Previous | View Threaded


g-ferguson at juno

Dec 7, 2009, 11:24 PM

Post #1 of 2 (1172 views)
Permalink
cx18 fails to load sh51409 with error -6 on HVR-1600

I'm attempting to install a HVR-1600 on mythbuntu 9.10. I've gone
through all the suggested troubleshooting I can find with no luck.

It seems like the digital tuner is failing for some reason.
(s5h1409 state =-6???)

I do have 2 NVIDIA graphics drivers, but I have seen no symptoms
related to these cards (1 onboard, 1 card). I have added the
vmalloc=xxxm to my grub boot conf files, but it made no difference.

I've installed the card in a different box and have verified the
analog portion is functional via the s-video input in windows. (don't currently
have digital signal to test with, but may once my cable gets hooked up)

I've installed the drivers and firmware as described here:
http://www.mythtv.org/wiki/Hauppauge_HVR-1600

I've tried blacklisting cx18 and trying to fire it manually.
No difference in the symptoms listed here.

Any suggestions are greatly appreciated!
-Greg



Full dmesg output is below, but the specific errors are here:
[ 5.592652] DVB: registering new adapter (cx18)
[ 5.661762] s5h1409_readreg: readreg error (ret == -6)
[ 5.661818] cx18-0: frontend initialization failed
[ 5.661922] cx18-0: DVB failed to register
[ 5.661946] cx18-0: Registered device video32 for encoder YUV (20 x 101.25 kB)
[ 5.661961] cx18-0: Registered device vbi0 for encoder VBI (20 x 51984 bytes)
[ 5.661975] cx18-0: Registered device video24 for encoder PCM audio (256 x 4.00 kB)
[ 5.662129] cx18-0: Error -1 registering devices
[ 5.662136] cx18-0: i2c: i2c exit
[ 5.662191] tuner-simple 2-0061: destroying instance
[ 5.662208] cx18-0: info: releasing enc_mem
[ 5.662731] cx18-0: Error -1 on initialization
[ 5.662737] cx18: probe of 0000:01:04.0 failed with error -1
[ 5.662755] cx18: End initialization


here's my lspci -vnn output for the card (full output below):

01:04.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23418 Single-Chip MPEG-2 Encoder with Integrated Analog Video/Broadcast Audio Decoder [14f1:5b7a]
Subsystem: Hauppauge computer works Inc. Device [0070:7444]
Flags: bus master, medium devsel, latency 64, IRQ 18
Memory at f4000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
Kernel modules: cx18




Full dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-14-generic (buildd [at] rother) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffa0000 (usable)
[ 0.000000] BIOS-e820: 000000003ffa0000 - 000000003ffae000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ffae000 - 000000003fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x3ffa0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFFC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009e000 (usable)
[ 0.000000] modified: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003ffa0000 (usable)
[ 0.000000] modified: 000000003ffa0000 - 000000003ffae000 (ACPI data)
[ 0.000000] modified: 000000003ffae000 - 000000003fff0000 (ACPI NVS)
[ 0.000000] modified: 000000003fff0000 - 0000000040000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] modified: 00000000ff700000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-000000002effe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 002ec00000 page 2M
[ 0.000000] 002ec00000 - 002effe000 page 4k
[ 0.000000] kernel direct mapping tables up to 2effe000 @ 10000-15000
[ 0.000000] RAMDISK: 2f8b2000 - 2fff755a
[ 0.000000] Allocated new RAMDISK: 008ad000 - 00ff255a
[ 0.000000] Move RAMDISK from 000000002f8b2000 - 000000002fff7559 to 008ad000 - 00ff2559
[ 0.000000] ACPI: RSDP 000fa860 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 3ffa0000 00044 (v01 051909 RSDT1150 20090519 MSFT 00000097)
[ 0.000000] ACPI: FACP 3ffa0200 00084 (v01 051909 FACP1150 20090519 MSFT 00000097)
[ 0.000000] ACPI: DSDT 3ffa0450 08816 (v01 1AAAA 1AAAA000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 3ffae000 00040
[ 0.000000] ACPI: APIC 3ffa0390 00080 (v01 051909 APIC1150 20090519 MSFT 00000097)
[ 0.000000] ACPI: MCFG 3ffa0410 0003C (v01 051909 OEMMCFG 20090519 MSFT 00000097)
[ 0.000000] ACPI: OEMB 3ffae040 00073 (v01 051909 OEMB1150 20090519 MSFT 00000097)
[ 0.000000] ACPI: HPET 3ffaa450 00038 (v01 051909 OEMHPET0 20090519 MSFT 00000097)
[ 0.000000] ACPI: INFO 3ffae0c0 00124 (v01 051909 AMDINFO 20090519 MSFT 00000097)
[ 0.000000] ACPI: NVHD 3ffae1f0 00284 (v01 051909 NVHDCP 20090519 MSFT 00000097)
[ 0.000000] ACPI: SSDT 3ffaa490 00458 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 271MB HIGHMEM available.
[ 0.000000] 751MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 2effe000
[ 0.000000] low ram: 0 - 2effe000
[ 0.000000] node 0 low ram: 00000000 - 2effe000
[ 0.000000] node 0 bootmap 00011000 - 00016e00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 002effe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0]
[ 0.000000] #4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000]
[ 0.000000] #5 [00008a9000 - 00008ac0eb] BRK ==> [00008a9000 - 00008ac0eb]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [00008ad000 - 0000ff255a] NEW RAMDISK ==> [00008ad000 - 0000ff255a]
[ 0.000000] #8 [0000011000 - 0000017000] BOOTMAP ==> [0000011000 - 0000017000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0002effe
[ 0.000000] HighMem 0x0002effe -> 0x0003ffa0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0003ffa0
[ 0.000000] On node 0 totalpages: 261934
[ 0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3950 pages, LIFO batch:0
[ 0.000000] Normal zone: 1472 pages used for memmap
[ 0.000000] Normal zone: 186942 pages, LIFO batch:31
[ 0.000000] HighMem zone: 544 pages used for memmap
[ 0.000000] HighMem zone: 68994 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c1805000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259886
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=ce12741d-5d85-4444-a6f4-9b3654f8e6d2 ro quiet splash vmalloc=256m
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 5240640 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (0002effe:0003ffa0)
[ 0.000000] Memory: 1017468k/1048192k available (4565k kernel code, 29676k reserved, 2143k data, 540k init, 278152k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xef7fe000 - 0xff7fe000 ( 256 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xeeffe000 ( 751 MB)
[ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB)
[ 0.000000] .data : 0xc0575554 - 0xc078d308 (2143 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0575554 (4565 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2800.120 MHz processor.
[ 0.000010] spurious 8259A interrupt: IRQ7.
[ 0.001592] Console: colour VGA+ 80x25
[ 0.001594] console [tty0] enabled
[ 0.001725] hpet clockevent registered
[ 0.001728] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.001733] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.24 BogoMIPS (lpj=11200480)
[ 0.001747] Security Framework initialized
[ 0.001761] AppArmor: AppArmor initialized
[ 0.001767] Mount-cache hash table entries: 512
[ 0.001852] Initializing cgroup subsys ns
[ 0.001855] Initializing cgroup subsys cpuacct
[ 0.001857] Initializing cgroup subsys memory
[ 0.001862] Initializing cgroup subsys freezer
[ 0.001863] Initializing cgroup subsys net_cls
[ 0.001872] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.001874] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.001876] CPU: Physical Processor ID: 0
[ 0.001877] CPU: Processor Core ID: 0
[ 0.001879] mce: CPU supports 6 MCE banks
[ 0.001886] using C1E aware idle routine
[ 0.001891] Performance Counters: AMD PMU driver.
[ 0.001896] ... version: 0
[ 0.001898] ... bit width: 48
[ 0.001899] ... generic counters: 4
[ 0.001900] ... value mask: 0000ffffffffffff
[ 0.001902] ... max period: 00007fffffffffff
[ 0.001903] ... fixed-purpose counters: 0
[ 0.001904] ... counter mask: 000000000000000f
[ 0.001907] Checking 'hlt' instruction... OK.
[ 0.017471] ACPI: Core revision 20090521
[ 0.028508] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068360] CPU0: AMD Athlon(tm) II X2 240 Processor stepping 02
[ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5600.02 BogoMIPS (lpj=11200050)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.156498] CPU1: AMD Athlon(tm) II X2 240 Processor stepping 02
[ 0.156511] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.160010] Brought up 2 CPUs
[ 0.160012] Total of 2 processors activated (11200.26 BogoMIPS).
[ 0.160094] CPU0 attaching sched-domain:
[ 0.160096] domain 0: span 0-1 level MC
[ 0.160098] groups: 0 1
[ 0.160102] CPU1 attaching sched-domain:
[ 0.160104] domain 0: span 0-1 level MC
[ 0.160105] groups: 1 0
[ 0.160155] Booting paravirtualized kernel on bare hardware
[ 0.160155] regulator: core version 0.5
[ 0.160155] Time: 4:18:34 Date: 12/08/09
[ 0.160155] NET: Registered protocol family 16
[ 0.160184] EISA bus registered
[ 0.160192] ACPI: bus type pci registered
[ 0.160240] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.160242] PCI: Not using MMCONFIG.
[ 0.160965] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.160967] PCI: Using configuration type 1 for base access
[ 0.160968] PCI: Using configuration type 1 for extended access
[ 0.161526] bio: create slab <bio-0> at 0
[ 0.161526] ACPI: EC: Look up EC in DSDT
[ 0.174696] ACPI: Interpreter enabled
[ 0.174699] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.174714] ACPI: Using IOAPIC for interrupt routing
[ 0.174757] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.180316] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.180318] PCI: Using MMCONFIG for extended config space
[ 0.190958] ACPI Warning: Incorrect checksum in table [OEMB] - F2, should be F1 20090521 tbutils-246
[ 0.191165] ACPI: No dock devices found.
[ 0.191502] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.191746] pci 0000:00:01.0: reg 10 io port: [0x2f00-0x2fff]
[ 0.191783] pci 0000:00:01.1: reg 10 io port: [0x2900-0x293f]
[ 0.191793] pci 0000:00:01.1: reg 20 io port: [0x2d00-0x2d3f]
[ 0.191797] pci 0000:00:01.1: reg 24 io port: [0x2e00-0x2e3f]
[ 0.191816] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.191821] pci 0000:00:01.1: PME# disabled
[ 0.191875] pci 0000:00:01.3: reg 10 32bit mmio: [0xf3f80000-0xf3ffffff]
[ 0.192005] pci 0000:00:02.0: reg 10 32bit mmio: [0xf3f7f000-0xf3f7ffff]
[ 0.192027] pci 0000:00:02.0: supports D1 D2
[ 0.192029] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.192031] pci 0000:00:02.0: PME# disabled
[ 0.192052] pci 0000:00:02.1: reg 10 32bit mmio: [0xf3f7ec00-0xf3f7ecff]
[ 0.192078] pci 0000:00:02.1: supports D1 D2
[ 0.192080] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.192082] pci 0000:00:02.1: PME# disabled
[ 0.192106] pci 0000:00:04.0: reg 10 32bit mmio: [0xf3f7d000-0xf3f7dfff]
[ 0.192128] pci 0000:00:04.0: supports D1 D2
[ 0.192129] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.192132] pci 0000:00:04.0: PME# disabled
[ 0.192153] pci 0000:00:04.1: reg 10 32bit mmio: [0xf3f7e800-0xf3f7e8ff]
[ 0.192179] pci 0000:00:04.1: supports D1 D2
[ 0.192180] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.192183] pci 0000:00:04.1: PME# disabled
[ 0.192215] pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf]
[ 0.192244] pci 0000:00:07.0: reg 10 32bit mmio: [0xf3f78000-0xf3f7bfff]
[ 0.192265] pci 0000:00:07.0: PME# supported from D3hot D3cold
[ 0.192268] pci 0000:00:07.0: PME# disabled
[ 0.192317] pci 0000:00:09.0: reg 10 io port: [0xb480-0xb487]
[ 0.192320] pci 0000:00:09.0: reg 14 io port: [0xb400-0xb403]
[ 0.192323] pci 0000:00:09.0: reg 18 io port: [0xb080-0xb087]
[ 0.192326] pci 0000:00:09.0: reg 1c io port: [0xb000-0xb003]
[ 0.192329] pci 0000:00:09.0: reg 20 io port: [0xac00-0xac0f]
[ 0.192333] pci 0000:00:09.0: reg 24 32bit mmio: [0xf3f76000-0xf3f77fff]
[ 0.192552] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.192559] pci 0000:00:10.0: PME# disabled
[ 0.192794] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.192801] pci 0000:00:12.0: PME# disabled
[ 0.193034] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.193041] pci 0000:00:13.0: PME# disabled
[ 0.193275] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.193281] pci 0000:00:14.0: PME# disabled
[ 0.193409] pci 0000:01:04.0: reg 10 32bit mmio: [0xf4000000-0xf7ffffff]
[ 0.193465] pci 0000:01:06.0: reg 10 io port: [0xc800-0xc8ff]
[ 0.193471] pci 0000:01:06.0: reg 14 32bit mmio: [0xf9fffc00-0xf9fffdff]
[ 0.193500] pci 0000:01:06.0: supports D1 D2
[ 0.193502] pci 0000:01:06.0: PME# supported from D1 D2 D3hot D3cold
[ 0.193505] pci 0000:01:06.0: PME# disabled
[ 0.193531] pci 0000:00:08.0: transparent bridge
[ 0.193534] pci 0000:00:08.0: bridge io port: [0xc000-0xcfff]
[ 0.193536] pci 0000:00:08.0: bridge 32bit mmio: [0xf4000000-0xf9ffffff]
[ 0.193566] pci 0000:02:00.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff]
[ 0.193573] pci 0000:02:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.193580] pci 0000:02:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff]
[ 0.193584] pci 0000:02:00.0: reg 24 io port: [0xdc00-0xdc7f]
[ 0.193588] pci 0000:02:00.0: reg 30 32bit mmio: [0xfdee0000-0xfdefffff]
[ 0.193650] pci 0000:00:10.0: bridge io port: [0xd000-0xdfff]
[ 0.193657] pci 0000:00:10.0: bridge 32bit mmio: [0xfa000000-0xfdefffff]
[ 0.193670] pci 0000:00:10.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.193846] pci 0000:05:00.0: reg 10 io port: [0xe800-0xe8ff]
[ 0.193859] pci 0000:05:00.0: reg 18 64bit mmio: [0xfdfff000-0xfdffffff]
[ 0.193869] pci 0000:05:00.0: reg 20 64bit mmio: [0xf2ff0000-0xf2ffffff]
[ 0.193875] pci 0000:05:00.0: reg 30 32bit mmio: [0xfdfc0000-0xfdfdffff]
[ 0.193902] pci 0000:05:00.0: supports D1 D2
[ 0.193904] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.193907] pci 0000:05:00.0: PME# disabled
[ 0.193964] pci 0000:00:14.0: bridge io port: [0xe000-0xefff]
[ 0.193971] pci 0000:00:14.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
[ 0.193984] pci 0000:00:14.0: bridge 64bit mmio pref: [0xf2f00000-0xf2ffffff]
[ 0.194033] pci_bus 0000:00: on NUMA node 0
[ 0.194037] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.194236] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.194323] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0._PRT]
[ 0.194374] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[ 0.194421] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[ 0.194471] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
[ 0.207218] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10
[ 0.207412] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.207607] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10
[ 0.207799] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.208004] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10
[ 0.208196] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
[ 0.208388] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
[ 0.208585] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
[ 0.208777] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
[ 0.208969] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
[ 0.209161] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
[ 0.209353] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
[ 0.209548] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *11
[ 0.209739] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
[ 0.209931] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
[ 0.210123] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
[ 0.210319] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *15
[ 0.210510] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
[ 0.210702] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
[ 0.210895] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
[ 0.211090] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *7
[ 0.211282] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
[ 0.211474] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
[ 0.211667] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
[ 0.211859] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
[ 0.212061] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
[ 0.212253] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
[ 0.212446] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
[ 0.212639] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
[ 0.212830] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
[ 0.213023] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
[ 0.213216] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
[ 0.213408] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled.
[ 0.213602] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled.
[ 0.213794] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled.
[ 0.213987] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled.
[ 0.214183] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *15
[ 0.214378] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
[ 0.214570] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[ 0.214767] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *15
[ 0.214959] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled.
[ 0.215155] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
[ 0.215351] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11
[ 0.215546] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[ 0.215770] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.215967] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10
[ 0.216173] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *11
[ 0.216290] SCSI subsystem initialized
[ 0.216308] libata version 3.00 loaded.
[ 0.216308] usbcore: registered new interface driver usbfs
[ 0.216308] usbcore: registered new interface driver hub
[ 0.216308] usbcore: registered new device driver usb
[ 0.216308] ACPI: WMI: Mapper loaded
[ 0.216308] PCI: Using ACPI for IRQ routing
[ 0.228024] Bluetooth: Core ver 2.15
[ 0.228058] NET: Registered protocol family 31
[ 0.228058] Bluetooth: HCI device and connection manager initialized
[ 0.228058] Bluetooth: HCI socket layer initialized
[ 0.228058] NetLabel: Initializing
[ 0.228058] NetLabel: domain hash size = 128
[ 0.228058] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.228058] NetLabel: unlabeled traffic allowed by default
[ 0.228067] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.228071] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.244028] pnp: PnP ACPI init
[ 0.244046] ACPI: bus type pnp registered
[ 0.249315] pnp: PnP ACPI: found 13 devices
[ 0.249317] ACPI: ACPI bus type pnp unregistered
[ 0.249319] PnPBIOS: Disabled by ACPI PNP
[ 0.249328] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[ 0.249330] system 00:05: ioport range 0x800-0x80f has been reserved
[ 0.249332] system 00:05: ioport range 0x2000-0x207f has been reserved
[ 0.249334] system 00:05: ioport range 0x2080-0x20ff has been reserved
[ 0.249336] system 00:05: ioport range 0x2400-0x247f has been reserved
[ 0.249338] system 00:05: ioport range 0x2480-0x24ff has been reserved
[ 0.249340] system 00:05: ioport range 0x2800-0x287f has been reserved
[ 0.249342] system 00:05: ioport range 0x2880-0x28ff has been reserved
[ 0.249345] system 00:05: iomem range 0xfed04000-0xfed04fff has been reserved
[ 0.249347] system 00:05: iomem range 0xfee01000-0xfeefffff has been reserved
[ 0.249352] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.249354] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.249358] system 00:0a: ioport range 0xa00-0xa0f has been reserved
[ 0.249359] system 00:0a: ioport range 0xa10-0xa1f has been reserved
[ 0.249368] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.249372] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.249374] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[ 0.249376] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 0.249378] system 00:0c: iomem range 0x100000-0x3fffffff could not be reserved
[ 0.249380] system 00:0c: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.283995] AppArmor: AppArmor Filesystem Enabled
[ 0.284077] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
[ 0.284079] pci 0000:00:08.0: IO window: 0xc000-0xcfff
[ 0.284082] pci 0000:00:08.0: MEM window: 0xf4000000-0xf9ffffff
[ 0.284085] pci 0000:00:08.0: PREFETCH window: disabled
[ 0.284087] pci 0000:00:10.0: PCI bridge, secondary bus 0000:02
[ 0.284092] pci 0000:00:10.0: IO window: 0xd000-0xdfff
[ 0.284101] pci 0000:00:10.0: MEM window: 0xfa000000-0xfdefffff
[ 0.284108] pci 0000:00:10.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.284120] pci 0000:00:12.0: PCI bridge, secondary bus 0000:03
[ 0.284121] pci 0000:00:12.0: IO window: disabled
[ 0.284130] pci 0000:00:12.0: MEM window: disabled
[ 0.284136] pci 0000:00:12.0: PREFETCH window: disabled
[ 0.284143] pci 0000:00:13.0: PCI bridge, secondary bus 0000:04
[ 0.284144] pci 0000:00:13.0: IO window: disabled
[ 0.284153] pci 0000:00:13.0: MEM window: disabled
[ 0.284160] pci 0000:00:13.0: PREFETCH window: disabled
[ 0.284166] pci 0000:00:14.0: PCI bridge, secondary bus 0000:05
[ 0.284171] pci 0000:00:14.0: IO window: 0xe000-0xefff
[ 0.284180] pci 0000:00:14.0: MEM window: 0xfdf00000-0xfdffffff
[ 0.284186] pci 0000:00:14.0: PREFETCH window: 0x000000f2f00000-0x000000f2ffffff
[ 0.284202] pci 0000:00:08.0: setting latency timer to 64
[ 0.284484] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19
[ 0.284487] alloc irq_desc for 19 on node -1
[ 0.284488] alloc kstat_irqs on node -1
[ 0.284495] pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19
[ 0.284502] pci 0000:00:10.0: setting latency timer to 64
[ 0.284781] ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18
[ 0.284783] alloc irq_desc for 18 on node -1
[ 0.284784] alloc kstat_irqs on node -1
[ 0.284790] pci 0000:00:12.0: PCI INT A -> Link[LN2A] -> GSI 18 (level, low) -> IRQ 18
[ 0.284797] pci 0000:00:12.0: setting latency timer to 64
[ 0.285069] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 17
[ 0.285071] alloc irq_desc for 17 on node -1
[ 0.285072] alloc kstat_irqs on node -1
[ 0.285078] pci 0000:00:13.0: PCI INT A -> Link[LN3A] -> GSI 17 (level, low) -> IRQ 17
[ 0.285085] pci 0000:00:13.0: setting latency timer to 64
[ 0.285357] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 16
[ 0.285358] alloc irq_desc for 16 on node -1
[ 0.285359] alloc kstat_irqs on node -1
[ 0.285365] pci 0000:00:14.0: PCI INT A -> Link[LN4A] -> GSI 16 (level, low) -> IRQ 16
[ 0.285372] pci 0000:00:14.0: setting latency timer to 64
[ 0.285378] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.285379] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.285381] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.285383] pci_bus 0000:01: resource 1 mem: [0xf4000000-0xf9ffffff]
[ 0.285385] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.285387] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[ 0.285389] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.285390] pci_bus 0000:02: resource 1 mem: [0xfa000000-0xfdefffff]
[ 0.285392] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.285394] pci_bus 0000:05: resource 0 io: [0xe000-0xefff]
[ 0.285396] pci_bus 0000:05: resource 1 mem: [0xfdf00000-0xfdffffff]
[ 0.285398] pci_bus 0000:05: resource 2 pref mem [0xf2f00000-0xf2ffffff]
[ 0.285424] NET: Registered protocol family 2
[ 0.285488] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.285691] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.286109] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.286359] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.286361] TCP reno registered
[ 0.286436] NET: Registered protocol family 1
[ 0.286483] Trying to unpack rootfs image as initramfs...
[ 0.431177] Freeing initrd memory: 7445k freed
[ 0.434330] cpufreq-nforce2: No nForce2 chipset.
[ 0.434350] Scanning for low memory corruption every 60 seconds
[ 0.434420] audit: initializing netlink socket (disabled)
[ 0.434432] type=2000 audit(1260245914.431:1): initialized
[ 0.440424] highmem bounce pool size: 64 pages
[ 0.440428] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.441342] VFS: Disk quotas dquot_6.5.2
[ 0.441379] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.441726] fuse init (API version 7.12)
[ 0.441778] msgmni has been set to 1459
[ 0.441923] alg: No test for stdrng (krng)
[ 0.441939] io scheduler noop registered
[ 0.441940] io scheduler anticipatory registered
[ 0.441941] io scheduler deadline registered
[ 0.441969] io scheduler cfq registered (default)
[ 0.442154] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 0.442254] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 0.442480] pci 0000:02:00.0: Boot video device
[ 0.442742] alloc irq_desc for 24 on node -1
[ 0.442743] alloc kstat_irqs on node -1
[ 0.442761] pcieport-driver 0000:00:10.0: irq 24 for MSI/MSI-X
[ 0.442780] pcieport-driver 0000:00:10.0: setting latency timer to 64
[ 0.443138] alloc irq_desc for 25 on node -1
[ 0.443139] alloc kstat_irqs on node -1
[ 0.443154] pcieport-driver 0000:00:12.0: irq 25 for MSI/MSI-X
[ 0.443172] pcieport-driver 0000:00:12.0: setting latency timer to 64
[ 0.443520] alloc irq_desc for 26 on node -1
[ 0.443521] alloc kstat_irqs on node -1
[ 0.443536] pcieport-driver 0000:00:13.0: irq 26 for MSI/MSI-X
[ 0.443554] pcieport-driver 0000:00:13.0: setting latency timer to 64
[ 0.443904] alloc irq_desc for 27 on node -1
[ 0.443905] alloc kstat_irqs on node -1
[ 0.443920] pcieport-driver 0000:00:14.0: irq 27 for MSI/MSI-X
[ 0.443938] pcieport-driver 0000:00:14.0: setting latency timer to 64
[ 0.444090] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.444105] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.444187] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.444190] ACPI: Power Button [PWRF]
[ 0.444231] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.444237] ACPI: Power Button [PWRB]
[ 0.444489] processor LNXCPU:00: registered as cooling_device0
[ 0.444509] processor LNXCPU:01: registered as cooling_device1
[ 0.449437] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.449441] ACPI: Thermal Zone [THRM] (30 C)
[ 0.449481] isapnp: Scanning for PnP cards...
[ 0.500527] Switched to high resolution mode on CPU 1
[ 0.503984] Switched to high resolution mode on CPU 0
[ 0.802397] isapnp: No Plug & Play device found
[ 0.803140] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.803228] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.803412] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.804033] brd: module loaded
[ 0.804298] loop: module loaded
[ 0.804341] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.804390] ahci 0000:00:09.0: version 3.0
[ 0.804672] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 0.804675] alloc irq_desc for 23 on node -1
[ 0.804677] alloc kstat_irqs on node -1
[ 0.804684] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[ 0.804702] alloc irq_desc for 28 on node -1
[ 0.804704] alloc kstat_irqs on node -1
[ 0.804708] ahci 0000:00:09.0: irq 28 for MSI/MSI-X
[ 0.804762] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.804764] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio
[ 0.804767] ahci 0000:00:09.0: setting latency timer to 64
[ 0.805139] scsi0 : ahci
[ 0.805223] scsi1 : ahci
[ 0.805259] scsi2 : ahci
[ 0.805293] scsi3 : ahci
[ 0.805327] scsi4 : ahci
[ 0.805360] scsi5 : ahci
[ 0.805442] ata1: SATA max UDMA/133 abar m8192 [at] 0xf3f7600 port 0xf3f76100 irq 28
[ 0.805444] ata2: SATA max UDMA/133 abar m8192 [at] 0xf3f7600 port 0xf3f76180 irq 28
[ 0.805446] ata3: SATA max UDMA/133 abar m8192 [at] 0xf3f7600 port 0xf3f76200 irq 28
[ 0.805448] ata4: SATA max UDMA/133 abar m8192 [at] 0xf3f7600 port 0xf3f76280 irq 28
[ 0.805450] ata5: SATA max UDMA/133 abar m8192 [at] 0xf3f7600 port 0xf3f76300 irq 28
[ 0.805452] ata6: SATA max UDMA/133 abar m8192 [at] 0xf3f7600 port 0xf3f76380 irq 28
[ 0.805611] pata_amd 0000:00:06.0: version 0.4.1
[ 0.805638] pata_amd 0000:00:06.0: setting latency timer to 64
[ 0.805700] scsi6 : pata_amd
[ 0.805739] scsi7 : pata_amd
[ 0.806446] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.806448] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.806897] Fixed MDIO Bus: probed
[ 0.806919] PPP generic driver version 2.4.2
[ 0.806997] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.807283] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 0.807286] alloc irq_desc for 22 on node -1
[ 0.807287] alloc kstat_irqs on node -1
[ 0.807294] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
[ 0.807304] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 0.807307] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 0.807345] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 0.807365] ehci_hcd 0000:00:02.1: debug port 1
[ 0.807368] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 0.807381] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf3f7ec00
[ 0.820029] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.820106] usb usb1: configuration #1 chosen from 1 choice
[ 0.820126] hub 1-0:1.0: USB hub found
[ 0.820132] hub 1-0:1.0: 6 ports detected
[ 0.820480] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 21
[ 0.820483] alloc irq_desc for 21 on node -1
[ 0.820485] alloc kstat_irqs on node -1
[ 0.820493] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 21 (level, low) -> IRQ 21
[ 0.820512] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 0.820514] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 0.820538] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
[ 0.820556] ehci_hcd 0000:00:04.1: debug port 1
[ 0.820559] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 0.820576] ehci_hcd 0000:00:04.1: irq 21, io mem 0xf3f7e800
[ 0.832030] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 0.832113] usb usb2: configuration #1 chosen from 1 choice
[ 0.832132] hub 2-0:1.0: USB hub found
[ 0.832138] hub 2-0:1.0: 6 ports detected
[ 0.832186] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.832503] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
[ 0.832506] alloc irq_desc for 20 on node -1
[ 0.832508] alloc kstat_irqs on node -1
[ 0.832516] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
[ 0.832528] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.832530] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.832554] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[ 0.832576] ohci_hcd 0000:00:02.0: irq 20, io mem 0xf3f7f000
[ 0.890079] usb usb3: configuration #1 chosen from 1 choice
[ 0.890102] hub 3-0:1.0: USB hub found
[ 0.890110] hub 3-0:1.0: 6 ports detected
[ 0.890454] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 23
[ 0.890457] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 23 (level, low) -> IRQ 23
[ 0.890470] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 0.890472] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 0.890496] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
[ 0.890518] ohci_hcd 0000:00:04.0: irq 23, io mem 0xf3f7d000
[ 0.946083] usb usb4: configuration #1 chosen from 1 choice
[ 0.946102] hub 4-0:1.0: USB hub found
[ 0.946110] hub 4-0:1.0: 6 ports detected
[ 0.946159] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.946217] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.946219] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.946601] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.946656] mice: PS/2 mouse device common for all mice
[ 0.946727] rtc_cmos 00:07: RTC can wake from S4
[ 0.946750] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.946801] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 0.946864] device-mapper: uevent: version 1.0.3
[ 0.946940] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel [at] redhat
[ 0.946990] device-mapper: multipath: version 1.1.0 loaded
[ 0.946992] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.947067] EISA: Probing bus 0 at eisa.0
[ 0.947073] Cannot allocate resource for EISA slot 2
[ 0.947088] EISA: Detected 0 cards.
[ 0.947147] cpuidle: using governor ladder
[ 0.947149] cpuidle: using governor menu
[ 0.947467] TCP cubic registered
[ 0.947563] NET: Registered protocol family 10
[ 0.947857] lo: Disabled Privacy Extensions
[ 0.948072] NET: Registered protocol family 17
[ 0.948082] Bluetooth: L2CAP ver 2.13
[ 0.948083] Bluetooth: L2CAP socket layer initialized
[ 0.948085] Bluetooth: SCO (Voice Link) ver 0.6
[ 0.948086] Bluetooth: SCO socket layer initialized
[ 0.948121] Bluetooth: RFCOMM TTY layer initialized
[ 0.948123] Bluetooth: RFCOMM socket layer initialized
[ 0.948124] Bluetooth: RFCOMM ver 1.11
[ 0.948137] powernow-k8: Found 1 AMD Athlon(tm) II X2 240 Processor processors (2 cpu cores) (version 2.20.00)
[ 0.948165] powernow-k8: 0 : pstate 0 (2800 MHz)
[ 0.948167] powernow-k8: 1 : pstate 1 (2100 MHz)
[ 0.948168] powernow-k8: 2 : pstate 2 (1600 MHz)
[ 0.948169] powernow-k8: 3 : pstate 3 (800 MHz)
[ 0.948249] Using IPI No-Shortcut mode
[ 0.948315] PM: Resume from disk failed.
[ 0.948323] registered taskstats version 1
[ 0.948420] Magic number: 5:330:312
[ 0.948539] rtc_cmos 00:07: setting system clock to 2009-12-08 04:18:35 UTC (1260245915)
[ 0.948541] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.948543] EDD information not available.
[ 0.967431] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.124037] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.124062] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.124075] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.124086] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.124097] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.288032] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.316709] ata1.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
[ 1.316712] ata1.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.320537] usb 4-4: new low speed USB device using ohci_hcd and address 2
[ 1.358646] ata1.00: configured for UDMA/133
[ 1.358729] scsi 0:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
[ 1.358835] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.358864] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 1.358888] sd 0:0:0:0: [sda] Write Protect is off
[ 1.358890] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.358902] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.358979] sda:
[ 1.359071] ata8: port disabled. ignoring.
[ 1.377672] sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[ 1.420821] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.420837] Freeing unused kernel memory: 540k freed
[ 1.421023] Write protecting the kernel text: 4568k
[ 1.421047] Write protecting the kernel read-only data: 1836k
[ 1.541095] usb 4-4: configuration #1 chosen from 1 choice
[ 1.549707] usbcore: registered new interface driver hiddev
[ 1.556218] input: Logitech USB Trackball as /devices/pci0000:00/0000:00:04.0/usb4/4-4/4-4:1.0/input/input4
[ 1.556271] generic-usb 0003:046D:C408.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:04.0-4/input0
[ 1.556283] usbcore: registered new interface driver usbhid
[ 1.556285] usbhid: v2.6:USB HID core driver
[ 2.667692] PM: Starting manual resume from disk
[ 2.667695] PM: Resume from partition 8:8
[ 2.667696] PM: Checking hibernation image.
[ 2.667891] PM: Resume from disk failed.
[ 2.700051] kjournald starting. Commit interval 5 seconds
[ 2.700071] EXT3-fs: mounted filesystem with writeback data mode.
[ 3.051035] type=1505 audit(1260245917.599:2): operation="profile_load" pid=452 name=/sbin/dhclient3
[ 3.051243] type=1505 audit(1260245917.599:3): operation="profile_load" pid=452 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 3.051358] type=1505 audit(1260245917.599:4): operation="profile_load" pid=452 name=/usr/lib/connman/scripts/dhclient-script
[ 3.063441] type=1505 audit(1260245917.611:5): operation="profile_load" pid=453 name=/usr/bin/evince
[ 3.066752] type=1505 audit(1260245917.615:6): operation="profile_load" pid=453 name=/usr/bin/evince-previewer
[ 3.068707] type=1505 audit(1260245917.619:7): operation="profile_load" pid=453 name=/usr/bin/evince-thumbnailer
[ 3.077910] type=1505 audit(1260245917.627:8): operation="profile_load" pid=455 name=/usr/sbin/mysqld
[ 3.097163] type=1505 audit(1260245917.647:9): operation="profile_load" pid=456 name=/usr/sbin/ntpd
[ 3.108191] type=1505 audit(1260245917.655:10): operation="profile_load" pid=457 name=/usr/sbin/tcpdump
[ 3.436957] Adding 4883720k swap on /dev/sda8. Priority:-1 extents:1 across:4883720k
[ 3.622226] udev: starting version 147
[ 4.018095] EXT3 FS on sda1, internal journal
[ 4.075648] r8168 Gigabit Ethernet driver 8.014.00-NAPI loaded
[ 4.075669] r8168 0000:05:00.0: PCI INT A -> Link[LN4A] -> GSI 16 (level, low) -> IRQ 16
[ 4.075685] r8168 0000:05:00.0: setting latency timer to 64
[ 4.075718] alloc irq_desc for 29 on node -1
[ 4.075720] alloc kstat_irqs on node -1
[ 4.075730] r8168 0000:05:00.0: irq 29 for MSI/MSI-X
[ 4.076990] r8168: This product is covered by one or more of the following patents: US5,307,459, US5,434,872, US5,732,094, US6,570,884, US6,115,776, and US6,327,625.
[ 4.076992] eth0: Identified chip type is 'RTL8168C/8111C'.
[ 4.076995] eth0: RTL8168B/8111B at 0xefcd4000, 00:25:11:3e:7b:77, IRQ 29
[ 4.080927] r8168 Copyright (C) 2009 Realtek NIC software team <nicfae [at] realtek>
[ 4.080928] This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
[ 4.080929] This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[ 4.084306] Linux agpgart interface v0.103
[ 4.114351] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00
[ 4.114356] ACPI: I/O resource nForce2_smbus [0x2e00-0x2e3f] conflicts with ACPI region SM00 [0x2e00-0x2e3f]
[ 4.114359] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.114361] nForce2_smbus 0000:00:01.1: Error probing SMB2.
[ 4.136148] lp: driver loaded but no devices found
[ 4.192589] cfg80211: Calling CRDA to update world regulatory domain
[ 4.552238] nvidia: module license 'NVIDIA' taints kernel.
[ 4.552241] Disabling lock debugging due to kernel taint
[ 4.619323] ndiswrapper version 1.55 loaded (smp=yes, preempt=no)
[ 4.685166] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.738578] Linux video capture interface: v2.00
[ 4.805828] nvidia 0000:02:00.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19
[ 4.805834] nvidia 0000:02:00.0: setting latency timer to 64
[ 4.805957] NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.36 Fri Aug 14 17:18:04 PDT 2009
[ 4.863532] usbcore: registered new interface driver ndiswrapper
[ 4.893487] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19
[ 4.893493] rtl8180 0000:01:06.0: PCI INT A -> Link[LNKC] -> GSI 19 (level, low) -> IRQ 19
[ 4.924033] cx18: Start initialization, version 1.3.0
[ 5.087924] phy0: Selected rate control algorithm 'minstrel'
[ 5.088385] phy0: hwaddr 00:17:3f:d3:d4:4a, RTL8185vD + rtl8225z2
[ 5.088513] cx18-0: Initializing card 0
[ 5.088515] cx18-0: info: Stream type 0 options: 2 MB, 64 buffers, 32768 bytes
[ 5.088517] cx18-0: info: Stream type 1 options: 1 MB, 32 buffers, 32768 bytes
[ 5.088519] cx18-0: info: Stream type 2 options: 2 MB, 20 buffers, 103680 bytes
[ 5.088521] cx18-0: info: Stream type 3 options: 1 MB, 20 buffers, 51984 bytes
[ 5.088523] cx18-0: info: Stream type 4 options: 1 MB, 256 buffers, 4096 bytes
[ 5.088525] cx18-0: info: Stream type 5 options: 1 MB, 32 buffers, 32768 bytes
[ 5.088527] cx18-0: Autodetected Hauppauge card
[ 5.092700] cx18-0: info: base addr: 0xf4000000
[ 5.092702] cx18-0: info: Enabling pci device
[ 5.093033] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18
[ 5.093038] cx18 0000:01:04.0: PCI INT A -> Link[LNKA] -> GSI 18 (level, low) -> IRQ 18
[ 5.093047] cx18-0: Unreasonably low latency timer, setting to 64 (was 32)
[ 5.093051] cx18-0: info: cx23418 (rev 0) at 01:04.0, irq: 18, latency: 64, memory: 0xf4000000
[ 5.093053] cx18-0: info: attempting ioremap at 0xf4000000 len 0x04000000
[ 5.093813] cx18-0: cx23418 revision 01010000 (B)
[ 5.115513] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
[ 5.115814] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 5.115818] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
[ 5.115835] HDA Intel 0000:00:07.0: setting latency timer to 64
[ 5.193439] cx18-0: info: GPIO initial dir: 0000ffff/0000ffff out: 00000000/00000000
[ 5.193457] cx18-0: info: activating i2c...
[ 5.193458] cx18-0: i2c: i2c init
[ 5.313515] tveeprom 1-0050: Hauppauge model 74041, rev C6B2, serial# 6381277
[ 5.313518] tveeprom 1-0050: MAC address is 00-0D-FE-61-5E-DD
[ 5.313520] tveeprom 1-0050: tuner model is TCL M2523_5N_E (idx 112, type 50)
[ 5.313523] tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
[ 5.313524] tveeprom 1-0050: audio processor is CX23418 (idx 38)
[ 5.313526] tveeprom 1-0050: decoder processor is CX23418 (idx 31)
[ 5.313528] tveeprom 1-0050: has no radio, has IR receiver, has IR transmitter
[ 5.313530] cx18-0: Autodetected Hauppauge HVR-1600
[ 5.313531] cx18-0: info: NTSC tuner detected
[ 5.313532] cx18-0: Simultaneous Digital and Analog TV capture supported
[ 5.409370] IRQ 18/cx18-0: IRQF_DISABLED is not guaranteed on shared IRQs
[ 5.491295] tuner 2-0061: chip found @ 0xc2 (cx18 i2c driver #0-1)
[ 5.506028] cs5345 1-004c: chip found @ 0x98 (cx18 i2c driver #0-0)
[ 5.591567] tuner-simple 2-0061: creating new instance
[ 5.591571] tuner-simple 2-0061: type set to 50 (TCL 2002N)
[ 5.592450] cx18-0: info: Allocate encoder MPEG stream: 64 x 32768 buffers (2048.00 kB total)
[ 5.592480] cx18-0: info: Allocate TS stream: 32 x 32768 buffers (1024.00 kB total)
[ 5.592493] cx18-0: info: Allocate encoder YUV stream: 20 x 103680 buffers (2025.00 kB total)
[ 5.592518] cx18-0: info: Allocate encoder VBI stream: 20 x 51984 buffers (1015.31 kB total)
[ 5.592530] cx18-0: info: Allocate encoder PCM audio stream: 256 x 4096 buffers (1024.00 kB total)
[ 5.592594] cx18-0: info: Allocate encoder IDX stream: 32 x 32768 buffers (1024.00 kB total)
[ 5.592650] cx18-0: Registered device video0 for encoder MPEG (64 x 32.00 kB)
[ 5.592652] DVB: registering new adapter (cx18)
[ 5.661762] s5h1409_readreg: readreg error (ret == -6)
[ 5.661818] cx18-0: frontend initialization failed
[ 5.661922] cx18-0: DVB failed to register
[ 5.661946] cx18-0: Registered device video32 for encoder YUV (20 x 101.25 kB)
[ 5.661961] cx18-0: Registered device vbi0 for encoder VBI (20 x 51984 bytes)
[ 5.661975] cx18-0: Registered device video24 for encoder PCM audio (256 x 4.00 kB)
[ 5.662129] cx18-0: Error -1 registering devices
[ 5.662136] cx18-0: i2c: i2c exit
[ 5.662191] tuner-simple 2-0061: destroying instance
[ 5.662208] cx18-0: info: releasing enc_mem
[ 5.662731] cx18-0: Error -1 on initialization
[ 5.662737] cx18: probe of 0000:01:04.0 failed with error -1
[ 5.662755] cx18: End initialization
[ 5.766479] kjournald starting. Commit interval 5 seconds
[ 5.767361] EXT3 FS on sda5, internal journal
[ 5.767365] EXT3-fs: mounted filesystem with writeback data mode.
[ 5.780082] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:07.0/input/input5
[ 5.891628] kjournald starting. Commit interval 5 seconds
[ 5.892520] EXT3 FS on sda6, internal journal
[ 5.892524] EXT3-fs: mounted filesystem with writeback data mode.
[ 6.056729] kjournald starting. Commit interval 5 seconds
[ 6.057318] EXT3 FS on sda7, internal journal
[ 6.057322] EXT3-fs: mounted filesystem with writeback data mode.
[ 6.370868] JFS: nTxBlock = 8016, nTxLock = 64128
[ 6.380094] input: HDA NVidia Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:07.0/sound/card0/input6
[ 6.380143] input: HDA NVidia Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:07.0/sound/card0/input7
[ 6.380181] input: HDA NVidia Mic at Sep Front Jack as /devices/pci0000:00/0000:00:07.0/sound/card0/input8
[ 6.380213] input: HDA NVidia Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:07.0/sound/card0/input9
[ 6.380252] input: HDA NVidia Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:07.0/sound/card0/input10
[ 6.380288] input: HDA NVidia Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:07.0/sound/card0/input11
[ 6.380320] input: HDA NVidia Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:07.0/sound/card0/input12
[ 6.380353] input: HDA NVidia HP Out at Sep Front Jack as /devices/pci0000:00/0000:00:07.0/sound/card0/input13
[ 7.012387] type=1505 audit(1260245921.559:11): operation="profile_replace" pid=999 name=/sbin/dhclient3
[ 7.012597] type=1505 audit(1260245921.563:12): operation="profile_replace" pid=999 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 7.012714] type=1505 audit(1260245921.563:13): operation="profile_replace" pid=999 name=/usr/lib/connman/scripts/dhclient-script
[ 7.015414] type=1505 audit(1260245921.563:14): operation="profile_replace" pid=1000 name=/usr/bin/evince
[ 7.018728] type=1505 audit(1260245921.567:15): operation="profile_replace" pid=1000 name=/usr/bin/evince-previewer
[ 7.020708] type=1505 audit(1260245921.571:16): operation="profile_replace" pid=1000 name=/usr/bin/evince-thumbnailer
[ 7.024279] type=1505 audit(1260245921.571:17): operation="profile_replace" pid=1002 name=/usr/sbin/mysqld
[ 7.025459] type=1505 audit(1260245921.575:18): operation="profile_replace" pid=1003 name=/usr/sbin/ntpd
[ 7.026529] type=1505 audit(1260245921.575:19): operation="profile_replace" pid=1004 name=/usr/sbin/tcpdump
[ 10.454049] type=1503 audit(1260245925.003:20): operation="open" pid=1222 parent=1221 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[ 13.810943] __ratelimit: 9 callbacks suppressed
[ 13.810945] type=1503 audit(1260245928.359:24): operation="open" pid=1428 parent=1427 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[ 13.858995] type=1503 audit(1260245928.407:25): operation="open" pid=1439 parent=1438 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[ 13.878927] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 14.552291] r8168: eth0: link down
[ 14.552455] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.439819] CPU0 attaching NULL sched-domain.
[ 21.439824] CPU1 attaching NULL sched-domain.
[ 21.452065] CPU0 attaching sched-domain:
[ 21.452069] domain 0: span 0-1 level MC
[ 21.452071] groups: 0 1
[ 21.452074] domain 1: span 0-1 level CPU
[ 21.452076] groups: 0-1 (__cpu_power = 2048)
[ 21.452080] CPU1 attaching sched-domain:
[ 21.452081] domain 0: span 0-1 level MC
[ 21.452083] groups: 1 0
[ 21.452085] domain 1: span 0-1 level CPU
[ 21.452086] groups: 0-1 (__cpu_power = 2048)
[ 23.320493] wlan0: authenticate with AP 00:0e:8e:03:29:f4
[ 23.325541] wlan0: authenticated
[ 23.325545] wlan0: associate with AP 00:0e:8e:03:29:f4
[ 23.327498] wlan0: RX AssocResp from 00:0e:8e:03:29:f4 (capab=0x431 status=0 aid=2)
[ 23.327500] wlan0: associated
[ 23.328832] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 33.812015] wlan0: no IPv6 routers present



full lspci -vnn
00:00.0 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0754] (rev a2)
Subsystem: Elitegroup Computer Systems Device [1019:2646]
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities: <access denied>

00:01.0 ISA bridge [0601]: nVidia Corporation MCP78S [GeForce 8200] LPC Bridge [10de:075c] (rev a2)
Subsystem: Elitegroup Computer Systems Device [1019:2646]
Flags: bus master, 66MHz, fast devsel, latency 0
I/O ports at 2f00 [size=256]

00:01.1 SMBus [0c05]: nVidia Corporation MCP78S [GeForce 8200] SMBus [10de:0752] (rev a1)
Subsystem: Elitegroup Computer Systems Device [1019:2646]
Flags: 66MHz, fast devsel, IRQ 10
I/O ports at 2900 [size=64]
I/O ports at 2d00 [size=64]
I/O ports at 2e00 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2

00:01.2 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0751] (rev a1)
Subsystem: Elitegroup Computer Systems Device [1019:2646]
Flags: 66MHz, fast devsel

00:01.3 Co-processor [0b40]: nVidia Corporation MCP78S [GeForce 8200] Co-Processor [10de:0753] (rev a2)
Subsystem: Elitegroup Computer Systems Device [1019:2646]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 11
Memory at f3f80000 (32-bit, non-prefetchable) [size=512K]

00:01.4 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0568] (rev a1)
Subsystem: Elitegroup Computer Systems Device [1019:2646]
Flags: 66MHz, fast devsel

00:02.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077b] (rev a1) (prog-if 10)
Subsystem: Elitegroup Computer Systems Device [1019:2646]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
Memory at f3f7f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd

00:02.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077c] (rev a1) (prog-if 20)
Subsystem: Elitegroup Computer Systems Device [1019:2646]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
Memory at f3f7ec00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:04.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077d] (rev a1) (prog-if 10)
Subsystem: Elitegroup Computer Systems Device [1019:2646]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
Memory at f3f7d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd

00:04.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077e] (rev a1) (prog-if 20)
Subsystem: Elitegroup Computer Systems Device [1019:2646]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
Memory at f3f7e800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:06.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] IDE [10de:0759] (rev a1) (prog-if 8a [Master SecP PriP])
Subsystem: Elitegroup Computer Systems Device [1019:2646]
Flags: bus master, 66MHz, fast devsel, latency 0
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_amd

00:07.0 Audio device [0403]: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio [10de:0774] (rev a1)
Subsystem: Elitegroup Computer Systems Device [1019:2646]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
Memory at f3f78000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

00:08.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge [10de:075a] (rev a1) (prog-if 01)
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f4000000-f9ffffff
Capabilities: <access denied>

00:09.0 SATA controller [0106]: nVidia Corporation MCP78S [GeForce 8200] AHCI Controller [10de:0ad4] (rev a2) (prog-if 01)
Subsystem: Elitegroup Computer Systems Device [1019:2646]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 28
I/O ports at b480 [size=8]
I/O ports at b400 [size=4]
I/O ports at b080 [size=8]
I/O ports at b000 [size=4]
I/O ports at ac00 [size=16]
Memory at f3f76000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci

00:10.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0778] (rev a1)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fa000000-fdefffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:12.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:075b] (rev a1)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:13.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge [10de:077a] (rev a1)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:14.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge [10de:077a] (rev a1)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: 00000000f2f00000-00000000f2ffffff
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration [1022:1200]
Flags: fast devsel
Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map [1022:1201]
Flags: fast devsel

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller [1022:1202]
Flags: fast devsel

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control [1022:1203]
Flags: fast devsel
Capabilities: <access denied>

00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control [1022:1204]
Flags: fast devsel

01:04.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23418 Single-Chip MPEG-2 Encoder with Integrated Analog Video/Broadcast Audio Decoder [14f1:5b7a]
Subsystem: Hauppauge computer works Inc. Device [0070:7444]
Flags: bus master, medium devsel, latency 64, IRQ 18
Memory at f4000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: <access denied>
Kernel modules: cx18

01:06.0 Ethernet controller [0200]: Belkin Device [1799:700f] (rev 20)
Subsystem: Belkin Device [1799:700f]
Flags: bus master, medium devsel, latency 32, IRQ 19
I/O ports at c800 [size=256]
Memory at f9fffc00 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: rtl8180
Kernel modules: rtl8180

02:00.0 VGA compatible controller [0300]: nVidia Corporation G98 [GeForce 8400 GS] [10de:06e4] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:830c]
Flags: bus master, fast devsel, latency 0, IRQ 19
Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
I/O ports at dc00 [size=128]
[virtual] Expansion ROM at fdee0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidia, nvidiafb

05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
Subsystem: Elitegroup Computer Systems Device [1019:8111]
Flags: bus master, fast devsel, latency 0, IRQ 29
I/O ports at e800 [size=256]
Memory at fdfff000 (64-bit, non-prefetchable) [size=4K]
Memory at f2ff0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at fdfc0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8168
Kernel modules: r8168

myth [at] mytht:~$ sudo lspci -vnn
[sudo] password for myth:
00:00.0 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0754] (rev a2)
Subsystem: Elitegroup Computer Systems Device [1019:2646]
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities: [94] HyperTransport: #1a
Capabilities: [60] HyperTransport: Retry Mode
Capabilities: [44] HyperTransport: Slave or Primary Interface
Capabilities: [d0] HyperTransport: #1c

00:01.0 ISA bridge [0601]: nVidia Corporation MCP78S [GeForce 8200] LPC Bridge [10de:075c] (rev a2)
Subsystem: Elitegroup Computer Systems Device [1019:2646]
Flags: bus master, 66MHz, fast devsel, latency 0
I/O ports at 2f00 [size=256]

00:01.1 SMBus [0c05]: nVidia Corporation MCP78S [GeForce 8200] SMBus [10de:0752] (rev a1)
Subsystem: Elitegroup Computer Systems Device [1019:2646]
Flags: 66MHz, fast devsel, IRQ 10
I/O ports at 2900 [size=64]
I/O ports at 2d00 [size=64]
I/O ports at 2e00 [size=64]
Capabilities: [44] Power Management version 2
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2

00:01.2 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0751] (rev a1)
Subsystem: Elitegroup Computer Systems Device [1019:2646]
Flags: 66MHz, fast devsel

00:01.3 Co-processor [0b40]: nVidia Corporation MCP78S [GeForce 8200] Co-Processor [10de:0753] (rev a2)
Subsystem: Elitegroup Computer Systems Device [1019:2646]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 11
Memory at f3f80000 (32-bit, non-prefetchable) [size=512K]

00:01.4 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0568] (rev a1)
Subsystem: Elitegroup Computer Systems Device [1019:2646]
Flags: 66MHz, fast devsel

00:02.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077b] (rev a1) (prog-if 10)
Subsystem: Elitegroup Computer Systems Device [1019:2646]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
Memory at f3f7f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Kernel driver in use: ohci_hcd

00:02.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077c] (rev a1) (prog-if 20)
Subsystem: Elitegroup Computer Systems Device [1019:2646]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
Memory at f3f7ec00 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=00a0
Capabilities: [80] Power Management version 2
Kernel driver in use: ehci_hcd

00:04.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077d] (rev a1) (prog-if 10)
Subsystem: Elitegroup Computer Systems Device [1019:2646]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
Memory at f3f7d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Kernel driver in use: ohci_hcd

00:04.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077e] (rev a1) (prog-if 20)
Subsystem: Elitegroup Computer Systems Device [1019:2646]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
Memory at f3f7e800 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=00a0
Capabilities: [80] Power Management version 2
Kernel driver in use: ehci_hcd

00:06.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] IDE [10de:0759] (rev a1) (prog-if 8a [Master SecP PriP])
Subsystem: Elitegroup Computer Systems Device [1019:2646]
Flags: bus master, 66MHz, fast devsel, latency 0
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
I/O ports at ffa0 [size=16]
Capabilities: [44] Power Management version 2
Kernel driver in use: pata_amd

00:07.0 Audio device [0403]: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio [10de:0774] (rev a1)
Subsystem: Elitegroup Computer Systems Device [1019:2646]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
Memory at f3f78000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

00:08.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge [10de:075a] (rev a1) (prog-if 01)
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f4000000-f9ffffff
Capabilities: [b8] Subsystem: Elitegroup Computer Systems Device [1019:2646]
Capabilities: [8c] HyperTransport: MSI Mapping Enable+ Fixed-

00:09.0 SATA controller [0106]: nVidia Corporation MCP78S [GeForce 8200] AHCI Controller [10de:0ad4] (rev a2) (prog-if 01)
Subsystem: Elitegroup Computer Systems Device [1019:2646]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 28
I/O ports at b480 [size=8]
I/O ports at b400 [size=4]
I/O ports at b080 [size=8]
I/O ports at b000 [size=4]
I/O ports at ac00 [size=16]
Memory at f3f76000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [44] Power Management version 2
Capabilities: [8c] SATA HBA <?>
Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable+
Capabilities: [ec] HyperTransport: MSI Mapping Enable+ Fixed+
Kernel driver in use: ahci

00:10.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0778] (rev a1)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fa000000-fdefffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Capabilities: [40] Subsystem: Elitegroup Computer Systems Device [1019:2646]
Capabilities: [48] Power Management version 3
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Capabilities: [80] Express Root Port (Slot+), MSI 00
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:12.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:075b] (rev a1)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Capabilities: [40] Subsystem: Elitegroup Computer Systems Device [1019:2646]
Capabilities: [48] Power Management version 3
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Capabilities: [80] Express Root Port (Slot+), MSI 00
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:13.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge [10de:077a] (rev a1)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Capabilities: [40] Subsystem: Elitegroup Computer Systems Device [1019:2646]
Capabilities: [48] Power Management version 3
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Capabilities: [80] Express Root Port (Slot+), MSI 00
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:14.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge [10de:077a] (rev a1)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: 00000000f2f00000-00000000f2ffffff
Capabilities: [40] Subsystem: Elitegroup Computer Systems Device [1019:2646]
Capabilities: [48] Power Management version 3
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Capabilities: [80] Express Root Port (Slot+), MSI 00
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration [1022:1200]
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map [1022:1201]
Flags: fast devsel

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller [1022:1202]
Flags: fast devsel

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control [1022:1203]
Flags: fast devsel
Capabilities: [f0] Secure device <?>

00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control [1022:1204]
Flags: fast devsel

01:04.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23418 Single-Chip MPEG-2 Encoder with Integrated Analog Video/Broadcast Audio Decoder [14f1:5b7a]
Subsystem: Hauppauge computer works Inc. Device [0070:7444]
Flags: bus master, medium devsel, latency 64, IRQ 18
Memory at f4000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
Kernel modules: cx18

01:06.0 Ethernet controller [0200]: Belkin Device [1799:700f] (rev 20)
Subsystem: Belkin Device [1799:700f]
Flags: bus master, medium devsel, latency 32, IRQ 19
I/O ports at c800 [size=256]
Memory at f9fffc00 (32-bit, non-prefetchable) [size=512]
Capabilities: [50] Power Management version 2
Kernel driver in use: rtl8180
Kernel modules: rtl8180

02:00.0 VGA compatible controller [0300]: nVidia Corporation G98 [GeForce 8400 GS] [10de:06e4] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:830c]
Flags: bus master, fast devsel, latency 0, IRQ 19
Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
I/O ports at dc00 [size=128]
[virtual] Expansion ROM at fdee0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 3
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [100] Virtual Channel <?>
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information <?>
Kernel driver in use: nvidia
Kernel modules: nvidia, nvidiafb

05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
Subsystem: Elitegroup Computer Systems Device [1019:8111]
Flags: bus master, fast devsel, latency 0, IRQ 29
I/O ports at e800 [size=256]
Memory at fdfff000 (64-bit, non-prefetchable) [size=4K]
Memory at f2ff0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at fdfc0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [b0] MSI-X: Enable- Mask- TabSize=2
Capabilities: [d0] Vital Product Data <?>
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [140] Virtual Channel <?>
Capabilities: [160] Device Serial Number 00-e0-4c-68-00-00-04-0a
Kernel driver in use: r8168
Kernel modules: r8168



_______________________________________________
ivtv-users mailing list
ivtv-users [at] ivtvdriver
http://ivtvdriver.org/mailman/listinfo/ivtv-users


awalls at radix

Dec 20, 2009, 1:21 PM

Post #2 of 2 (1040 views)
Permalink
Re: cx18 fails to load sh51409 with error -6 on HVR-1600 [In reply to]

On Tue, 2009-12-08 at 07:24 +0000, Greg Ferguson wrote:
> I'm attempting to install a HVR-1600 on mythbuntu 9.10. I've gone
> through all the suggested troubleshooting I can find with no luck.
>
> It seems like the digital tuner is failing for some reason.
> (s5h1409 state =-6???)

That's -ENXIO coming from the linux I2C subsystem

linux/drivers/i2c/algos/i2c-algo-bit.c:bit_xfer()
linux/drivers/i2c/algos/i2c-algo-bit.c:bit_doAddress()

when the cx18 driver asks the DVB subsystem to talk to the S5H1409
Digital ATSC/QAM demodulator chip using the CX23418's I2C master.


> I do have 2 NVIDIA graphics drivers, but I have seen no symptoms
> related to these cards (1 onboard, 1 card). I have added the
> vmalloc=xxxm to my grub boot conf files, but it made no difference.
>
> I've installed the card in a different box and have verified the
> analog portion is functional via the s-video input in windows. (don't currently
> have digital signal to test with, but may once my cable gets hooked up)
>
> I've installed the drivers and firmware as described here:
> http://www.mythtv.org/wiki/Hauppauge_HVR-1600
>
> I've tried blacklisting cx18 and trying to fire it manually.
> No difference in the symptoms listed here.
>
> Any suggestions are greatly appreciated!

It is not a very good sign if the driver can't talk to this chip even
when loaded while the system is not busy (i.e. blacklisted and loaded
later).

1. Please check the card in a Windows box, if you can, and see if you
can tune to digital channels. This should rule out bad hardware.


2. Add the "bit_test=1" option for the i2c_algo_bit module in your
modprobe configuration. This will test the i2c_bus to see if it is
stuck. If the bus is OK then "Test OK" will appear in the logs, when
the cx18 driver first tries to initialize the card.


3. In

v4l-dvb/linux/drivers/media/video/cx18/cx18-cards.c

for the HVR-1600 you can lengthen the reset delays for some of the chips
on the I2C bus on the card by upping the .msecs_asserted
and .msecs_recovery:

.gpio_i2c_slave_reset = {
.active_lo_mask = 0x3001,
.msecs_asserted = 10,
.msecs_recovery = 40,

The units are in milliseconds. Throw in 100 msec for both of them and
recompile and reinstall the driver. Let me know if that helps.

Regards,
Andy

> -Greg
>
>
>
> Full dmesg output is below, but the specific errors are here:
> [ 5.592652] DVB: registering new adapter (cx18)
> [ 5.661762] s5h1409_readreg: readreg error (ret == -6)
> [ 5.661818] cx18-0: frontend initialization failed
> [ 5.661922] cx18-0: DVB failed to register
> [ 5.661946] cx18-0: Registered device video32 for encoder YUV (20 x 101.25 kB)
> [ 5.661961] cx18-0: Registered device vbi0 for encoder VBI (20 x 51984 bytes)
> [ 5.661975] cx18-0: Registered device video24 for encoder PCM audio (256 x 4.00 kB)
> [ 5.662129] cx18-0: Error -1 registering devices
> [ 5.662136] cx18-0: i2c: i2c exit
> [ 5.662191] tuner-simple 2-0061: destroying instance
> [ 5.662208] cx18-0: info: releasing enc_mem
> [ 5.662731] cx18-0: Error -1 on initialization
> [ 5.662737] cx18: probe of 0000:01:04.0 failed with error -1
> [ 5.662755] cx18: End initialization
>
>
> here's my lspci -vnn output for the card (full output below):
>
> 01:04.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23418 Single-Chip MPEG-2 Encoder with Integrated Analog Video/Broadcast Audio Decoder [14f1:5b7a]
> Subsystem: Hauppauge computer works Inc. Device [0070:7444]
> Flags: bus master, medium devsel, latency 64, IRQ 18
> Memory at f4000000 (32-bit, non-prefetchable) [size=64M]
> Capabilities: [44] Vital Product Data <?>
> Capabilities: [4c] Power Management version 2
> Kernel modules: cx18
>
>
>
>
> Full dmesg:

> [ 4.924033] cx18: Start initialization, version 1.3.0
> [ 5.087924] phy0: Selected rate control algorithm 'minstrel'
> [ 5.088385] phy0: hwaddr 00:17:3f:d3:d4:4a, RTL8185vD + rtl8225z2
> [ 5.088513] cx18-0: Initializing card 0
> [ 5.088515] cx18-0: info: Stream type 0 options: 2 MB, 64 buffers, 32768 bytes
> [ 5.088517] cx18-0: info: Stream type 1 options: 1 MB, 32 buffers, 32768 bytes
> [ 5.088519] cx18-0: info: Stream type 2 options: 2 MB, 20 buffers, 103680 bytes
> [ 5.088521] cx18-0: info: Stream type 3 options: 1 MB, 20 buffers, 51984 bytes
> [ 5.088523] cx18-0: info: Stream type 4 options: 1 MB, 256 buffers, 4096 bytes
> [ 5.088525] cx18-0: info: Stream type 5 options: 1 MB, 32 buffers, 32768 bytes
> [ 5.088527] cx18-0: Autodetected Hauppauge card
> [ 5.092700] cx18-0: info: base addr: 0xf4000000
> [ 5.092702] cx18-0: info: Enabling pci device
> [ 5.093033] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18
> [ 5.093038] cx18 0000:01:04.0: PCI INT A -> Link[LNKA] -> GSI 18 (level, low) -> IRQ 18
> [ 5.093047] cx18-0: Unreasonably low latency timer, setting to 64 (was 32)
> [ 5.093051] cx18-0: info: cx23418 (rev 0) at 01:04.0, irq: 18, latency: 64, memory: 0xf4000000
> [ 5.093053] cx18-0: info: attempting ioremap at 0xf4000000 len 0x04000000
> [ 5.093813] cx18-0: cx23418 revision 01010000 (B)
> [ 5.115513] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
> [ 5.115814] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
> [ 5.115818] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
> [ 5.115835] HDA Intel 0000:00:07.0: setting latency timer to 64
> [ 5.193439] cx18-0: info: GPIO initial dir: 0000ffff/0000ffff out: 00000000/00000000
> [ 5.193457] cx18-0: info: activating i2c...
> [ 5.193458] cx18-0: i2c: i2c init
> [ 5.313515] tveeprom 1-0050: Hauppauge model 74041, rev C6B2, serial# 6381277
> [ 5.313518] tveeprom 1-0050: MAC address is 00-0D-FE-61-5E-DD
> [ 5.313520] tveeprom 1-0050: tuner model is TCL M2523_5N_E (idx 112, type 50)
> [ 5.313523] tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
> [ 5.313524] tveeprom 1-0050: audio processor is CX23418 (idx 38)
> [ 5.313526] tveeprom 1-0050: decoder processor is CX23418 (idx 31)
> [ 5.313528] tveeprom 1-0050: has no radio, has IR receiver, has IR transmitter
> [ 5.313530] cx18-0: Autodetected Hauppauge HVR-1600
> [ 5.313531] cx18-0: info: NTSC tuner detected
> [ 5.313532] cx18-0: Simultaneous Digital and Analog TV capture supported
> [ 5.409370] IRQ 18/cx18-0: IRQF_DISABLED is not guaranteed on shared IRQs
> [ 5.491295] tuner 2-0061: chip found @ 0xc2 (cx18 i2c driver #0-1)
> [ 5.506028] cs5345 1-004c: chip found @ 0x98 (cx18 i2c driver #0-0)
> [ 5.591567] tuner-simple 2-0061: creating new instance
> [ 5.591571] tuner-simple 2-0061: type set to 50 (TCL 2002N)
> [ 5.592450] cx18-0: info: Allocate encoder MPEG stream: 64 x 32768 buffers (2048.00 kB total)
> [ 5.592480] cx18-0: info: Allocate TS stream: 32 x 32768 buffers (1024.00 kB total)
> [ 5.592493] cx18-0: info: Allocate encoder YUV stream: 20 x 103680 buffers (2025.00 kB total)
> [ 5.592518] cx18-0: info: Allocate encoder VBI stream: 20 x 51984 buffers (1015.31 kB total)
> [ 5.592530] cx18-0: info: Allocate encoder PCM audio stream: 256 x 4096 buffers (1024.00 kB total)
> [ 5.592594] cx18-0: info: Allocate encoder IDX stream: 32 x 32768 buffers (1024.00 kB total)
> [ 5.592650] cx18-0: Registered device video0 for encoder MPEG (64 x 32.00 kB)
> [ 5.592652] DVB: registering new adapter (cx18)
> [ 5.661762] s5h1409_readreg: readreg error (ret == -6)
> [ 5.661818] cx18-0: frontend initialization failed
> [ 5.661922] cx18-0: DVB failed to register
> [ 5.661946] cx18-0: Registered device video32 for encoder YUV (20 x 101.25 kB)
> [ 5.661961] cx18-0: Registered device vbi0 for encoder VBI (20 x 51984 bytes)
> [ 5.661975] cx18-0: Registered device video24 for encoder PCM audio (256 x 4.00 kB)
> [ 5.662129] cx18-0: Error -1 registering devices
> [ 5.662136] cx18-0: i2c: i2c exit
> [ 5.662191] tuner-simple 2-0061: destroying instance
> [ 5.662208] cx18-0: info: releasing enc_mem
> [ 5.662731] cx18-0: Error -1 on initialization
> [ 5.662737] cx18: probe of 0000:01:04.0 failed with error -1
> [ 5.662755] cx18: End initialization



_______________________________________________
ivtv-users mailing list
ivtv-users [at] ivtvdriver
http://ivtvdriver.org/mailman/listinfo/ivtv-users

ivtv users RSS feed   Index | Next | Previous | View Threaded
 
 


Interested in having your list archived? Contact Gossamer Threads
 
  Web Applications & Managed Hosting Powered by Gossamer Threads Inc.