habib.bouaziz at gmail
Oct 4, 2009, 8:42 AM
Post #1 of 1
(728 views)
Permalink
|
Hi all !
I have some trouble with the PVR-350 S-Video input. Audio/Video
Signals comes from an old VideoTape (VHS)
I make this :
v4l2-ctl --set-input=1
Video input set to 1 (S-Video 1)
cat /dev/video0 > test.mpg
^C
mplayer test.mpg
Audio is fine but no video (black screen)
How can i fix this ?
Best regards,
BTW :
01:09.0 Multimedia video controller: Internext Compression Inc iTVC15
MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. Device 4000
Flags: bus master, medium devsel, latency 128, IRQ 17
Memory at e4000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: ivtv
Kernel modules: ivtv
habib [at] betelgeus:~$ dmesg | grep ivtv
[ 9.232960] ivtv: Start initialization, version 1.4.0
[ 9.233058] ivtv0: Initializing card #0
[ 9.233060] ivtv0: Autodetected Hauppauge card (cx23415 based)
[ 9.233542] ivtv 0000:01:09.0: PCI INT A -> Link[APC2] -> GSI 17
(level, low) -> IRQ 17
[ 9.281184] ivtv0: Autodetected Hauppauge WinTV PVR-350
[ 9.441606] saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42
(ivtv i2c driver #0)
[ 9.559996] saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
[ 9.597930] msp3400 0-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver #0)
[ 9.633292] tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
[ 9.639966] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
[ 9.659379] ivtv0: Registered device video0 for encoder MPG (4096 kB)
[ 9.659415] ivtv0: Registered device video32 for encoder YUV (2048 kB)
[ 9.659463] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
[ 9.659499] ivtv0: Registered device video24 for encoder PCM (320 kB)
[ 9.659534] ivtv0: Registered device radio0 for encoder radio
[ 9.659569] ivtv0: Registered device video16 for decoder MPG (1024 kB)
[ 9.659604] ivtv0: Registered device vbi8 for decoder VBI (64 kB)
[ 9.659639] ivtv0: Registered device vbi16 for decoder VOUT
[ 9.659677] ivtv0: Registered device video48 for decoder YUV (1024 kB)
[ 9.659679] ivtv0: Initialized card #0: Hauppauge WinTV PVR-350
[ 9.659710] ivtv: End initialization
[ 10.996026] ivtv 0000:01:09.0: firmware: requesting v4l-cx2341x-enc.fw
[ 11.057915] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
[ 11.057933] ivtv 0000:01:09.0: firmware: requesting v4l-cx2341x-dec.fw
[ 11.090556] ivtv0: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
[ 11.288354] ivtv0: Encoder revision: 0x02060039
[ 11.288477] ivtv0: Decoder revision: 0x02020023
[ 11.336601] ivtv 0000:01:09.0: firmware: requesting v4l-cx2341x-init.mpg
[ 11.379575] ivtv0: Loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
[ 11.584646] ivtvfb0: Framebuffer at 0xe5510000, mapped to
0xf9b90000, size 1665k
[ 11.692093] ivtvfb0: Framebuffer registered on ivtv card id 0
[ 22.314060] lirc_pvr150: ivtv i2c driver #0: no devices found
--
Habib
_______________________________________________
ivtv-users mailing list
ivtv-users [at] ivtvdriver
http://ivtvdriver.org/mailman/listinfo/ivtv-users
|
