Mailing List Archive: ivtv: users

cx18 anlog tv tuner picture but now audio

Index | Next | Previous | View Threaded

linux51 at hotmail

Aug 20, 2009, 6:09 PM

Post #1 of 7 (2154 views)
Permalink

cx18 anlog tv tuner picture but now audio

Im using a HVR-1600 in Fedora 11 x64. I previously had the card working flawlessly in Fedora 10 32-bit. I have tried grabbing the latest firmware as well as drivers. I can see in /var/log/messages that the card is being initialized. But when I do a cat /dev/video1 > test.mpg I get video but no audio. I use it with MythTV and in the backend log all that can be found when switching to the analog tunere is "Not IVTV Driver??" here is the output for lspci -v
01:05.0 Multimedia video controller: Conexant Systems, Inc. CX23418 Single-Chip MPEG-2 Encoder with Integrated Analog Video/Broadcast Audio Decoder
Subsystem: Hauppauge computer works Inc. WinTV HVR-1600
Flags: bus master, medium devsel, latency 64, IRQ 16
Memory at d4000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Kernel driver in use: cx18
Kernel modules: cx18
Please help. Thanks, Jayme

_________________________________________________________________
Hotmail® is up to 70% faster. Now good news travels really fast.
http://windowslive.com/online/hotmail?ocid=PID23391::T:WLMTAGL:ON:WL:en-US:WM_HYGN_faster:082009

awalls at radix

Aug 20, 2009, 7:36 PM

Post #2 of 7 (2054 views)
Permalink

Re: cx18 anlog tv tuner picture but now audio [In reply to]

On Thu, 2009-08-20 at 21:09 -0400, Jayme Shaffer wrote:
> Im using a HVR-1600 in Fedora 11 x64. I previously had the card
> working flawlessly in Fedora 10 32-bit. I have tried grabbing the
> latest firmware as well as drivers. I can see in /var/log/messages
> that the card is being initialized. But when I do a cat /dev/video1 >
> test.mpg I get video but no audio.

Make sure the audio volume is up. Use the "Advanced Volume Control" app
that's buried somewhere under the system menu. (Fedora 11 is such a
hassle for something this basic...)

Also could you provide the output of

$ v4l2-ctl -d /dev/video1 --log-status

when tuned to a good station.

> I use it with MythTV and in the backend log all that can be found
> when switching to the analog tunere is "Not IVTV Driver??"

Well, truth be told, the cx18 driver doesn't behave exactly like the
ivtv driver, so MythTV notices at times. :)

Those messages are harmless, IIRC. I use MythTV all the time.

Regards,
Andy

> here is the output for lspci -v
> 01:05.0 Multimedia video controller: Conexant Systems, Inc. CX23418
> Single-Chip MPEG-2 Encoder with Integrated Analog Video/Broadcast
> Audio Decoder
> Subsystem: Hauppauge computer works Inc. WinTV HVR-1600
> Flags: bus master, medium devsel, latency 64, IRQ 16
> Memory at d4000000 (32-bit, non-prefetchable) [size=64M]
> Capabilities: [44] Vital Product Data
> Capabilities: [4c] Power Management version 2
> Kernel driver in use: cx18
> Kernel modules: cx18
> Please help. Thanks, Jayme
>
>
> ______________________________________________________________________

_______________________________________________
ivtv-users mailing list
ivtv-users [at] ivtvdriver
http://ivtvdriver.org/mailman/listinfo/ivtv-users

linux51 at hotmail

Aug 21, 2009, 3:24 PM

Post #3 of 7 (2037 views)
Permalink

Re: cx18 anlog tv tuner picture but now audio [In reply to]

Thanks for your help so far. With me juggling settings it is now video0 still no audio. I checked all of the options under the advanced volume control and no luck. Here is the output for the card. I see a few things that sand out that might be nothing or might be the issue. "no detected audio standard" is one "audio muted yes" is another ant the last is the "audio microcontroller: stopped". I looked up the mute command for v4l2-ctl and tried that as well but no luck.

cx18-0: ================= START STATUS CARD #0 =================
cx18-0: Version: 1.2.0 Card: Hauppauge HVR-1600
tveeprom 0-0050: Hauppauge model 74041, rev C6B2, serial# 937559
tveeprom 0-0050: MAC address is 00-0D-FE-0E-4E-57
tveeprom 0-0050: tuner model is TCL M2523_5N_E (idx 112, type 50)
tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 0-0050: audio processor is CX23418 (idx 38)
tveeprom 0-0050: decoder processor is CX23418 (idx 31)
tveeprom 0-0050: has no radio, has IR receiver, has IR transmitter
cx18-0 843: Video signal: present
cx18-0 843: Detected format: NTSC-M
cx18-0 843: Specified standard: NTSC-M
cx18-0 843: Specified video input: Composite 7
cx18-0 843: Specified audioclock freq: 32000 Hz
cx18-0 843: Detected audio mode: mono
cx18-0 843: Detected audio standard: no detected audio standard
cx18-0 843: Audio muted: yes
cx18-0 843: Audio microcontroller: stopped
cx18-0 843: Configured audio standard: automatic detection
cx18-0 843: Configured audio system: BTSC
cx18-0 843: Specified audio input: Tuner (In8)
cx18-0 843: Preferred audio mode: stereo
cx18-0 gpio-reset-ctrl: GPIO: direction 0x00003001, value 0x00003001
tuner 1-0061: Tuner mode: analog TV
tuner 1-0061: Frequency: 61.25 MHz
tuner 1-0061: Standard: 0x0000b000
cs5345 0-004c: Input: 1
cs5345 0-004c: Volume: 0 dB
cx18-0: Video Input: Tuner 1
cx18-0: Audio Input: Tuner 1
cx18-0: GPIO: direction 0x00003001, value 0x00003001
cx18-0: Tuner: TV
cx18-0: Stream: MPEG-2 Program Stream
cx18-0: VBI Format: No VBI
cx18-0: Video: 720x480, 30 fps
cx18-0: Video: MPEG-2, 4x3, Variable Bitrate, 4500000, Peak 6000000
cx18-0: Video: GOP Size 15, 2 B-Frames, GOP Closure
cx18-0: Audio: 32 kHz, MPEG-1/2 Layer II, 384 kbps, Stereo, No Emphasis, No CRC
cx18-0: Spatial Filter: Manual, Luma 1D Horizontal, Chroma 1D Horizontal, 0
cx18-0: Temporal Filter: Manual, 8
cx18-0: Median Filter: Off, Luma [0, 255], Chroma [0, 255]
cx18-0: Status flags: 0x00200001
cx18-0: Stream encoder MPEG: status 0x0000, 0% of 2048 KiB (64 buffers) in use
cx18-0: Stream encoder YUV: status 0x0000, 0% of 2048 KiB (16 buffers) in use
cx18-0: Stream encoder VBI: status 0x0000, 0% of 1015 KiB (20 buffers) in use
cx18-0: Stream encoder PCM audio: status 0x0000, 0% of 1024 KiB (256 buffers) in use
cx18-0: Read MPEG/VBI: 47030272/0 bytes
cx18-0: ================== END STATUS CARD #0 ==================

> From: awalls [at] radix
> To: ivtv-users [at] ivtvdriver
> Date: Thu, 20 Aug 2009 22:36:07 -0400
> Subject: Re: [ivtv-users] cx18 anlog tv tuner picture but now audio
>
> On Thu, 2009-08-20 at 21:09 -0400, Jayme Shaffer wrote:
> > Im using a HVR-1600 in Fedora 11 x64. I previously had the card
> > working flawlessly in Fedora 10 32-bit. I have tried grabbing the
> > latest firmware as well as drivers. I can see in /var/log/messages
> > that the card is being initialized. But when I do a cat /dev/video1 >
> > test.mpg I get video but no audio.
>
> Make sure the audio volume is up. Use the "Advanced Volume Control" app
> that's buried somewhere under the system menu. (Fedora 11 is such a
> hassle for something this basic...)
>
> Also could you provide the output of
>
> $ v4l2-ctl -d /dev/video1 --log-status
>
> when tuned to a good station.
>
>
> > I use it with MythTV and in the backend log all that can be found
> > when switching to the analog tunere is "Not IVTV Driver??"
>
> Well, truth be told, the cx18 driver doesn't behave exactly like the
> ivtv driver, so MythTV notices at times. :)
>
> Those messages are harmless, IIRC. I use MythTV all the time.
>
> Regards,
> Andy
>
> > here is the output for lspci -v
> > 01:05.0 Multimedia video controller: Conexant Systems, Inc. CX23418
> > Single-Chip MPEG-2 Encoder with Integrated Analog Video/Broadcast
> > Audio Decoder
> > Subsystem: Hauppauge computer works Inc. WinTV HVR-1600
> > Flags: bus master, medium devsel, latency 64, IRQ 16
> > Memory at d4000000 (32-bit, non-prefetchable) [size=64M]
> > Capabilities: [44] Vital Product Data
> > Capabilities: [4c] Power Management version 2
> > Kernel driver in use: cx18
> > Kernel modules: cx18
> > Please help. Thanks, Jayme
> >
> >
> > ______________________________________________________________________
>
>
> _______________________________________________
> ivtv-users mailing list
> ivtv-users [at] ivtvdriver
> http://ivtvdriver.org/mailman/listinfo/ivtv-users

_________________________________________________________________
Get back to school stuff for them and cashback for you.
http://www.bing.com/cashback?form=MSHYCB&publ=WLHMTAG&crea=TEXT_MSHYCB_BackToSchool_Cashback_BTSCashback_1x1

awalls at radix

Aug 21, 2009, 7:26 PM

Post #4 of 7 (2035 views)
Permalink

Re: cx18 anlog tv tuner picture but now audio [In reply to]

On Fri, 2009-08-21 at 18:24 -0400, Jayme Shaffer wrote:
> Thanks for your help so far. With me juggling settings it is now
> video0 still no audio. I checked all of the options under the
> advanced volume control and no luck. Here is the output for the card.
> I see a few things that sand out that might be nothing or might be the
> issue. "no detected audio standard" is one "audio muted yes" is
> another ant the last is the "audio microcontroller: stopped". I
> looked up the mute command for v4l2-ctl and tried that as well but no
> luck.

It looks like the "audio standard auto-detection microcontroller
firmware" (whew!) didn't get loaded properly.

Some things to do:

1. Check to make sure that /lib/frimware (or wherever) has
v4l-cx23418-dig.fw in it, it is readable, and has a good hash:

$ sha256sum /lib/firmware/v4l-cx23418-dig.fw
fd545dcb14f40e0666b95fdb3a73356e34ee282c217b96fc2740747ce1c5b0c4 /lib/firmware/v4l-cx23418-dig.fw

2. Check for errors in dmesg or /var/log/messages related to
v4l-cx23418-dig.fw failing to load or initialize. Normal loading looks
somehting like this:

[ 16.963093] firmware: requesting v4l-cx23418-cpu.fw
[ 18.302494] cx18-0: loaded v4l-cx23418-cpu.fw firmware (158332 bytes)
[ 18.347998] firmware: requesting v4l-cx23418-apu.fw
[ 18.841280] cx18-0: loaded v4l-cx23418-apu.fw firmware V00120000 (141200 bytes)
[ 18.847667] cx18-0: FW version: 0.0.74.0 (Release 2007/03/12)
[ 19.055046] firmware: requesting v4l-cx23418-cpu.fw
[ 19.397242] firmware: requesting v4l-cx23418-apu.fw
[ 19.845859] firmware: requesting v4l-cx23418-dig.fw
[ 20.368420] cx18-0 843: loaded v4l-cx23418-dig.fw firmware (16382 bytes)
[ 20.409945] cx18-0 843: verified load of v4l-cx23418-dig.fw firmware (16382 bytes)

3. Try recording from the Composite or SVideo in and audio line in
eliminate any problem with the audio processing in the MPEG encoder.

Don't worry about the audio being muted for now; that's normal. We rely
on the microcontroller to unmute the audio when it detetcts a valid TV
audio standard. And since the microcontroller isn't running....

-Andy

>
> cx18-0: ================= START STATUS CARD #0 =================
> cx18-0: Version: 1.2.0 Card: Hauppauge HVR-1600
> tveeprom 0-0050: Hauppauge model 74041, rev C6B2, serial# 937559
> tveeprom 0-0050: MAC address is 00-0D-FE-0E-4E-57
> tveeprom 0-0050: tuner model is TCL M2523_5N_E (idx 112, type 50)
> tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
> tveeprom 0-0050: audio processor is CX23418 (idx 38)
> tveeprom 0-0050: decoder processor is CX23418 (idx 31)
> tveeprom 0-0050: has no radio, has IR receiver, has IR transmitter
> cx18-0 843: Video signal: present
> cx18-0 843: Detected format: NTSC-M
> cx18-0 843: Specified standard: NTSC-M
> cx18-0 843: Specified video input: Composite 7
> cx18-0 843: Specified audioclock freq: 32000 Hz
> cx18-0 843: Detected audio mode: mono
> cx18-0 843: Detected audio standard: no detected audio standard
> cx18-0 843: Audio muted: yes
> cx18-0 843: Audio microcontroller: stopped
> cx18-0 843: Configured audio standard: automatic detection
> cx18-0 843: Configured audio system: BTSC
> cx18-0 843: Specified audio input: Tuner (In8)
> cx18-0 843: Preferred audio mode: stereo
> cx18-0 gpio-reset-ctrl: GPIO: direction 0x00003001, value
> 0x00003001
> tuner 1-0061: Tuner mode: analog TV
> tuner 1-0061: Frequency: 61.25 MHz
> tuner 1-0061: Standard: 0x0000b000
> cs5345 0-004c: Input: 1
> cs5345 0-004c: Volume: 0 dB
> cx18-0: Video Input: Tuner 1
> cx18-0: Audio Input: Tuner 1
> cx18-0: GPIO: direction 0x00003001, value 0x00003001
> cx18-0: Tuner: TV
> cx18-0: Stream: MPEG-2 Program Stream
> cx18-0: VBI Format: No VBI
> cx18-0: Video: 720x480, 30 fps
> cx18-0: Video: MPEG-2, 4x3, Variable Bitrate, 4500000, Peak
> 6000000
> cx18-0: Video: GOP Size 15, 2 B-Frames, GOP Closure
> cx18-0: Audio: 32 kHz, MPEG-1/2 Layer II, 384 kbps, Stereo, No
> Emphasis, No CRC
> cx18-0: Spatial Filter: Manual, Luma 1D Horizontal, Chroma 1D
> Horizontal, 0
> cx18-0: Temporal Filter: Manual, 8
> cx18-0: Median Filter: Off, Luma [0, 255], Chroma [0, 255]
> cx18-0: Status flags: 0x00200001
> cx18-0: Stream encoder MPEG: status 0x0000, 0% of 2048 KiB (64
> buffers) in use
> cx18-0: Stream encoder YUV: status 0x0000, 0% of 2048 KiB (16
> buffers) in use
> cx18-0: Stream encoder VBI: status 0x0000, 0% of 1015 KiB (20
> buffers) in use
> cx18-0: Stream encoder PCM audio: status 0x0000, 0% of 1024 KiB
> (256 buffers) in use
> cx18-0: Read MPEG/VBI: 47030272/0 bytes
> cx18-0: ================== END STATUS CARD #0 ==================
>
>
> > From: awalls [at] radix
> > To: ivtv-users [at] ivtvdriver
> > Date: Thu, 20 Aug 2009 22:36:07 -0400
> > Subject: Re: [ivtv-users] cx18 anlog tv tuner picture but now audio
> >
> > On Thu, 2009-08-20 at 21:09 -0400, Jayme Shaffer wrote:
> > > Im using a HVR-1600 in Fedora 11 x64. I previously had the card
> > > working flawlessly in Fedora 10 32-bit. I have tried grabbing the
> > > latest firmware as well as drivers. I can see in /var/log/messages
> > > that the card is being initialized. But when I do a
> cat /dev/video1 >
> > > test.mpg I get video but no audio.
> >
> > Make sure the audio volume is up. Use the "Advanced Volume Control"
> app
> > that's buried somewhere under the system menu. (Fedora 11 is such a
> > hassle for something this basic...)
> >
> > Also could you provide the output of
> >
> > $ v4l2-ctl -d /dev/video1 --log-status
> >
> > when tuned to a good station.
> >
> >
> > > I use it with MythTV and in the backend log all that can be found
> > > when switching to the analog tunere is "Not IVTV Driver??"
> >
> > Well, truth be told, the cx18 driver doesn't behave exactly like the
> > ivtv driver, so MythTV notices at times. :)
> >
> > Those messages are harmless, IIRC. I use MythTV all the time.
> >
> > Regards,
> > Andy
> >
> > > here is the output for lspci -v
> > > 01:05.0 Multimedia video controller: Conexant Systems, Inc.
> CX23418
> > > Single-Chip MPEG-2 Encoder with Integrated Analog Video/Broadcast
> > > Audio Decoder
> > > Subsystem: Hauppauge computer works Inc. WinTV HVR-1600
> > > Flags: bus master, medium devsel, latency 64, IRQ 16
> > > Memory at d4000000 (32-bit, non-prefetchable) [size=64M]
> > > Capabilities: [44] Vital Product Data
> > > Capabilities: [4c] Power Management version 2
> > > Kernel driver in use: cx18
> > > Kernel modules: cx18
> > > Please help. Thanks, Jayme
> > >
> > >
> > >
> ______________________________________________________________________
> >
> >
> > _______________________________________________
> > ivtv-users mailing list
> > ivtv-users [at] ivtvdriver
> > http://ivtvdriver.org/mailman/listinfo/ivtv-users
>
>
> ______________________________________________________________________
> Get back to school stuff for them and cashback for you. Try BingT now.
> _______________________________________________
> ivtv-users mailing list
> ivtv-users [at] ivtvdriver
> http://ivtvdriver.org/mailman/listinfo/ivtv-users

_______________________________________________
ivtv-users mailing list
ivtv-users [at] ivtvdriver
http://ivtvdriver.org/mailman/listinfo/ivtv-users

linux51 at hotmail

Aug 23, 2009, 4:25 PM

Post #5 of 7 (2009 views)
Permalink

Re: cx18 anlog tv tuner picture but now audio [In reply to]

Well I checked the hash and it is fine. When I do dmesg | grep v4l I get:

cx18 0000:01:05.0: firmware: requesting v4l-cx23418-cpu.fw
cx18-0: loaded v4l-cx23418-cpu.fw firmware (158332 bytes)
cx18 0000:01:05.0: firmware: requesting v4l-cx23418-apu.fw
cx18-0: loaded v4l-cx23418-apu.fw firmware V00120000 (141200 bytes)
cx18 0000:01:05.0: firmware: requesting v4l-cx23418-cpu.fw
cx18 0000:01:05.0: firmware: requesting v4l-cx23418-apu.fw
ivtv 0000:01:06.0: firmware: requesting v4l-cx2341x-enc.fw
ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
cx18 0000:01:05.0: firmware: requesting v4l-cx23418-dig.fw
cx18-0 843: loaded v4l-cx23418-dig.fw firmware (16382 bytes)
cx18-0 843: verified load of v4l-cx23418-dig.fw firmware (16382 bytes)

I tried using the svideo input and through myth I get now sound which might be a config issue on my part but when I do cat /dev/video1 > test.mpg I get audio and video. But when I issue the same command and the input is on tuner with a good channel I get video and no audio when using cat and still no audio in myth. Here is a log status output when I'm using s-video:

cx18-0: ================= START STATUS CARD #0 =================
cx18-0: Version: 1.2.0 Card: Hauppauge HVR-1600
tveeprom 1-0050: Hauppauge model 74041, rev C6B2, serial# 937559
tveeprom 1-0050: MAC address is 00-0D-FE-0E-4E-57
tveeprom 1-0050: tuner model is TCL M2523_5N_E (idx 112, type 50)
tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 1-0050: audio processor is CX23418 (idx 38)
tveeprom 1-0050: decoder processor is CX23418 (idx 31)
tveeprom 1-0050: has no radio, has IR receiver, has IR transmitter
cx18-0 843: Video signal: present
cx18-0 843: Detected format: NTSC-M
cx18-0 843: Specified standard: NTSC-M
cx18-0 843: Specified video input: S-Video (Luma In1, Chroma In5)
cx18-0 843: Specified audioclock freq: 32000 Hz
cx18-0 843: Detected audio mode: mono
cx18-0 843: Detected audio standard: no detected audio standard
cx18-0 843: Audio muted: no
cx18-0 843: Audio microcontroller: stopped
cx18-0 843: Configured audio standard: automatic detection
cx18-0 843: Configured audio system: BTSC
cx18-0 843: Specified audio input: External
cx18-0 843: Preferred audio mode: stereo
cx18-0 gpio-reset-ctrl: GPIO: direction 0x00003001, value 0x00003001
tuner 2-0061: Tuner mode: analog TV
tuner 2-0061: Frequency: 55.25 MHz
tuner 2-0061: Standard: 0x0000b000
cs5345 1-004c: Input: 2
cs5345 1-004c: Volume: 0 dB
cx18-0: Video Input: S-Video 1
cx18-0: Audio Input: Line In 1
cx18-0: GPIO: direction 0x00003001, value 0x00003001
cx18-0: Tuner: TV
cx18-0: Stream: MPEG-2 Program Stream
cx18-0: VBI Format: No VBI
cx18-0: Video: 720x480, 30 fps
cx18-0: Video: MPEG-2, 4x3, Variable Bitrate, 4500000, Peak 6000000
cx18-0: Video: GOP Size 15, 2 B-Frames, GOP Closure
cx18-0: Audio: 32 kHz, MPEG-1/2 Layer II, 384 kbps, Stereo, No Emphasis, No CRC
cx18-0: Spatial Filter: Manual, Luma 1D Horizontal, Chroma 1D Horizontal, 0
cx18-0: Temporal Filter: Manual, 8
cx18-0: Median Filter: Off, Luma [0, 255], Chroma [0, 255]
cx18-0: Status flags: 0x00200001
cx18-0: Stream encoder MPEG: status 0x0118, 1% of 2048 KiB (64 buffers) in use
cx18-0: Stream encoder YUV: status 0x0000, 0% of 2048 KiB (16 buffers) in use
cx18-0: Stream encoder VBI: status 0x0000, 0% of 1015 KiB (20 buffers) in use
cx18-0: Stream encoder PCM audio: status 0x0000, 0% of 1024 KiB (256 buffers) in use
cx18-0: Read MPEG/VBI: 3309568/0 bytes
cx18-0: ================== END STATUS CARD #0 ==================

Don't know if it helps..

Jayme

> From: awalls [at] radix
> To: ivtv-users [at] ivtvdriver
> Date: Fri, 21 Aug 2009 22:26:26 -0400
> Subject: Re: [ivtv-users] cx18 anlog tv tuner picture but now audio
>
> On Fri, 2009-08-21 at 18:24 -0400, Jayme Shaffer wrote:
> > Thanks for your help so far. With me juggling settings it is now
> > video0 still no audio. I checked all of the options under the
> > advanced volume control and no luck. Here is the output for the card.
> > I see a few things that sand out that might be nothing or might be the
> > issue. "no detected audio standard" is one "audio muted yes" is
> > another ant the last is the "audio microcontroller: stopped". I
> > looked up the mute command for v4l2-ctl and tried that as well but no
> > luck.
> .
> It looks like the "audio standard auto-detection microcontroller
> firmware" (whew!) didn't get loaded properly.
>
> Some things to do:
>
> 1. Check to make sure that /lib/frimware (or wherever) has
> v4l-cx23418-dig.fw in it, it is readable, and has a good hash:
>
> $ sha256sum /lib/firmware/v4l-cx23418-dig.fw
> fd545dcb14f40e0666b95fdb3a73356e34ee282c217b96fc2740747ce1c5b0c4 /lib/firmware/v4l-cx23418-dig.fw
>
>
> 2. Check for errors in dmesg or /var/log/messages related to
> v4l-cx23418-dig.fw failing to load or initialize. Normal loading looks
> somehting like this:
>
> [ 16.963093] firmware: requesting v4l-cx23418-cpu.fw
> [ 18.302494] cx18-0: loaded v4l-cx23418-cpu.fw firmware (158332 bytes)
> [ 18.347998] firmware: requesting v4l-cx23418-apu.fw
> [ 18.841280] cx18-0: loaded v4l-cx23418-apu.fw firmware V00120000 (141200 bytes)
> [ 18.847667] cx18-0: FW version: 0.0.74.0 (Release 2007/03/12)
> [ 19.055046] firmware: requesting v4l-cx23418-cpu.fw
> [ 19.397242] firmware: requesting v4l-cx23418-apu.fw
> [ 19.845859] firmware: requesting v4l-cx23418-dig.fw
> [ 20.368420] cx18-0 843: loaded v4l-cx23418-dig.fw firmware (16382 bytes)
> [ 20.409945] cx18-0 843: verified load of v4l-cx23418-dig.fw firmware (16382 bytes)
>
>
> 3. Try recording from the Composite or SVideo in and audio line in
> eliminate any problem with the audio processing in the MPEG encoder.
>
>
>
>
> Don't worry about the audio being muted for now; that's normal. We rely
> on the microcontroller to unmute the audio when it detetcts a valid TV
> audio standard. And since the microcontroller isn't running....
>
>
> -Andy
>
> >
> > cx18-0: ================= START STATUS CARD #0 =================
> > cx18-0: Version: 1.2.0 Card: Hauppauge HVR-1600
> > tveeprom 0-0050: Hauppauge model 74041, rev C6B2, serial# 937559
> > tveeprom 0-0050: MAC address is 00-0D-FE-0E-4E-57
> > tveeprom 0-0050: tuner model is TCL M2523_5N_E (idx 112, type 50)
> > tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
> > tveeprom 0-0050: audio processor is CX23418 (idx 38)
> > tveeprom 0-0050: decoder processor is CX23418 (idx 31)
> > tveeprom 0-0050: has no radio, has IR receiver, has IR transmitter
> > cx18-0 843: Video signal: present
> > cx18-0 843: Detected format: NTSC-M
> > cx18-0 843: Specified standard: NTSC-M
> > cx18-0 843: Specified video input: Composite 7
> > cx18-0 843: Specified audioclock freq: 32000 Hz
> > cx18-0 843: Detected audio mode: mono
> > cx18-0 843: Detected audio standard: no detected audio standard
> > cx18-0 843: Audio muted: yes
> > cx18-0 843: Audio microcontroller: stopped
> > cx18-0 843: Configured audio standard: automatic detection
> > cx18-0 843: Configured audio system: BTSC
> > cx18-0 843: Specified audio input: Tuner (In8)
> > cx18-0 843: Preferred audio mode: stereo
> > cx18-0 gpio-reset-ctrl: GPIO: direction 0x00003001, value
> > 0x00003001
> > tuner 1-0061: Tuner mode: analog TV
> > tuner 1-0061: Frequency: 61.25 MHz
> > tuner 1-0061: Standard: 0x0000b000
> > cs5345 0-004c: Input: 1
> > cs5345 0-004c: Volume: 0 dB
> > cx18-0: Video Input: Tuner 1
> > cx18-0: Audio Input: Tuner 1
> > cx18-0: GPIO: direction 0x00003001, value 0x00003001
> > cx18-0: Tuner: TV
> > cx18-0: Stream: MPEG-2 Program Stream
> > cx18-0: VBI Format: No VBI
> > cx18-0: Video: 720x480, 30 fps
> > cx18-0: Video: MPEG-2, 4x3, Variable Bitrate, 4500000, Peak
> > 6000000
> > cx18-0: Video: GOP Size 15, 2 B-Frames, GOP Closure
> > cx18-0: Audio: 32 kHz, MPEG-1/2 Layer II, 384 kbps, Stereo, No
> > Emphasis, No CRC
> > cx18-0: Spatial Filter: Manual, Luma 1D Horizontal, Chroma 1D
> > Horizontal, 0
> > cx18-0: Temporal Filter: Manual, 8
> > cx18-0: Median Filter: Off, Luma [0, 255], Chroma [0, 255]
> > cx18-0: Status flags: 0x00200001
> > cx18-0: Stream encoder MPEG: status 0x0000, 0% of 2048 KiB (64
> > buffers) in use
> > cx18-0: Stream encoder YUV: status 0x0000, 0% of 2048 KiB (16
> > buffers) in use
> > cx18-0: Stream encoder VBI: status 0x0000, 0% of 1015 KiB (20
> > buffers) in use
> > cx18-0: Stream encoder PCM audio: status 0x0000, 0% of 1024 KiB
> > (256 buffers) in use
> > cx18-0: Read MPEG/VBI: 47030272/0 bytes
> > cx18-0: ================== END STATUS CARD #0 ==================
> >
> >
> > > From: awalls [at] radix
> > > To: ivtv-users [at] ivtvdriver
> > > Date: Thu, 20 Aug 2009 22:36:07 -0400
> > > Subject: Re: [ivtv-users] cx18 anlog tv tuner picture but now audio
> > >
> > > On Thu, 2009-08-20 at 21:09 -0400, Jayme Shaffer wrote:
> > > > Im using a HVR-1600 in Fedora 11 x64. I previously had the card
> > > > working flawlessly in Fedora 10 32-bit. I have tried grabbing the
> > > > latest firmware as well as drivers. I can see in /var/log/messages
> > > > that the card is being initialized. But when I do a
> > cat /dev/video1 >
> > > > test.mpg I get video but no audio.
> > >
> > > Make sure the audio volume is up. Use the "Advanced Volume Control"
> > app
> > > that's buried somewhere under the system menu. (Fedora 11 is such a
> > > hassle for something this basic...)
> > >
> > > Also could you provide the output of
> > >
> > > $ v4l2-ctl -d /dev/video1 --log-status
> > >
> > > when tuned to a good station.
> > >
> > >
> > > > I use it with MythTV and in the backend log all that can be found
> > > > when switching to the analog tunere is "Not IVTV Driver??"
> > >
> > > Well, truth be told, the cx18 driver doesn't behave exactly like the
> > > ivtv driver, so MythTV notices at times. :)
> > >
> > > Those messages are harmless, IIRC. I use MythTV all the time.
> > >
> > > Regards,
> > > Andy
> > >
> > > > here is the output for lspci -v
> > > > 01:05.0 Multimedia video controller: Conexant Systems, Inc.
> > CX23418
> > > > Single-Chip MPEG-2 Encoder with Integrated Analog Video/Broadcast
> > > > Audio Decoder
> > > > Subsystem: Hauppauge computer works Inc. WinTV HVR-1600
> > > > Flags: bus master, medium devsel, latency 64, IRQ 16
> > > > Memory at d4000000 (32-bit, non-prefetchable) [size=64M]
> > > > Capabilities: [44] Vital Product Data
> > > > Capabilities: [4c] Power Management version 2
> > > > Kernel driver in use: cx18
> > > > Kernel modules: cx18
> > > > Please help. Thanks, Jayme
> > > >
> > > >
> > > >
> > ______________________________________________________________________
> > >
> > >
> > > _______________________________________________
> > > ivtv-users mailing list
> > > ivtv-users [at] ivtvdriver
> > > http://ivtvdriver.org/mailman/listinfo/ivtv-users
> >
> >
> > ______________________________________________________________________
> > Get back to school stuff for them and cashback for you. Try BingT now.
> > _______________________________________________
> > ivtv-users mailing list
> > ivtv-users [at] ivtvdriver
> > http://ivtvdriver.org/mailman/listinfo/ivtv-users
>
>
> _______________________________________________
> ivtv-users mailing list
> ivtv-users [at] ivtvdriver
> http://ivtvdriver.org/mailman/listinfo/ivtv-users

_________________________________________________________________
Windows Live: Make it easier for your friends to see what you’re up to on Facebook.
http://windowslive.com/Campaign/SocialNetworking?ocid=PID23285::T:WLMTAGL:ON:WL:en-US:SI_SB_facebook:082009

awalls at radix

Aug 24, 2009, 5:28 PM

Post #6 of 7 (2001 views)
Permalink

Re: cx18 anlog tv tuner picture but now audio [In reply to]

On Sun, 2009-08-23 at 19:25 -0400, Jayme Shaffer wrote:
> Well I checked the hash and it is fine. When I do dmesg | grep v4l I
> get:
>
> cx18 0000:01:05.0: firmware: requesting v4l-cx23418-cpu.fw
> cx18-0: loaded v4l-cx23418-cpu.fw firmware (158332 bytes)
> cx18 0000:01:05.0: firmware: requesting v4l-cx23418-apu.fw
> cx18-0: loaded v4l-cx23418-apu.fw firmware V00120000 (141200 bytes)
> cx18 0000:01:05.0: firmware: requesting v4l-cx23418-cpu.fw
> cx18 0000:01:05.0: firmware: requesting v4l-cx23418-apu.fw
> ivtv 0000:01:06.0: firmware: requesting v4l-cx2341x-enc.fw
> ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
> cx18 0000:01:05.0: firmware: requesting v4l-cx23418-dig.fw
> cx18-0 843: loaded v4l-cx23418-dig.fw firmware (16382 bytes)
> cx18-0 843: verified load of v4l-cx23418-dig.fw firmware (16382 bytes)

OK good.

> I tried using the svideo input and through myth I get now sound which
> might be a config issue on my part but when I do cat /dev/video1 >
> test.mpg I get audio and video. But when I issue the same command and
> the input is on tuner with a good channel I get video and no audio
> when using cat and still no audio in myth. Here is a log status
> output when I'm using s-video:

> Don't know if it helps..

OK S-video works.

(BTW, I tested my DTV set top box analog RF output into the HVR-1600
with the latest v4l-dvb drivers on Fedora 9 (2.26.27) on a 64 bit
machine. The tuner audio came through fine for me.)

So:

1. the microcontroller firmware image is correct
2. the firmware image bytes are written to the microcontroller properly
3. line-in audio, that bypasses this audio controller, works

Yet the microcontroller is both stopped and muted.

What can be wrong:

1. The firmware image pointer the kernel provided to the driver is bad -
very unlikely

2. The register writes to start up the microcontroller are failing -
very unlikely since all the other register writes seem to be working
fine

3. Something is actively muting the tuner audio - the most likely cause.
Probably something from user space is muting the audio.

What to do:

Stop the mythbackend, then

$ v4l2-ctl -d /dev/video0 -i 0
Video input set to 0 (Tuner 1)

$ ivtv-tune -d /dev/video0 -t us-cable -c 4 (or whatever channel)
/dev/video0: 67.250 MHz

$ v4l2-ctl -d /dev/video0 -c audio_sampling_frequency=1 ( 48 ksps )

$ v4l2-ctl -d /dev/video0 -C audio_sampling_frequency
audio_sampling_frequency: 1

$ v4l2-ctl -d /dev/video0 -c mute=1

$ v4l2-ctl -d /dev/video0 --log-status | grep microcontroller
cx18-0 843: Audio microcontroller: stopped

$ v4l2-ctl -d /dev/video0 -c mute=0

$ v4l2-ctl -d /dev/video0 --log-status | grep microcontroller
cx18-0 843: Audio microcontroller: running (should be running!)

$ v4l2-ctl -d /dev/video0 --log-status | grep 'audio standard'
cx18-0 843: Detected audio standard: BTSC
cx18-0 843: Configured audio standard: automatic detection

$ mplayer /dev/video0 -cache 8192

And you should be seeing US cable channel 4 with audio.

The critical step above is that disabling the mute starts the audio
controller running. If that doesn't happen, we'll have to start some
serious troubleshooting.

> Jayme
>
> > From: awalls [at] radix
> > To: ivtv-users [at] ivtvdriver
> > Date: Fri, 21 Aug 2009 22:26:26 -0400
> > Subject: Re: [ivtv-users] cx18 anlog tv tuner picture but now audio
> >
> > On Fri, 2009-08-21 at 18:24 -0400, Jayme Shaffer wrote:
> > > Thanks for your help so far. With me juggling settings it is now
> > > video0 still no audio. I checked all of the options under the
> > > advanced volume control and no luck. Here is the output for the
> card.
> > > I see a few things that sand out that might be nothing or might be
> the
> > > issue. "no detected audio standard" is one "audio muted yes" is
> > > another ant the last is the "audio microcontroller: stopped". I
> > > looked up the mute command for v4l2-ctl and tried that as well but
> no
> > > luck.
> > .
> > It looks like the "audio standard auto-detection microcontroller
> > firmware" (whew!) didn't get loaded properly.
> >
> > Some things to do:
> >
> > 1. Check to make sure that /lib/frimware (or wherever) has
> > v4l-cx23418-dig.fw in it, it is readable, and has a good hash:
> >
> > $ sha256sum /lib/firmware/v4l-cx23418-dig.fw
> >
> fd545dcb14f40e0666b95fdb3a73356e34ee282c217b96fc2740747ce1c5b0c4 /lib/firmware/v4l-cx23418-dig.fw
> >
> >
> > 2. Check for errors in dmesg or /var/log/messages related to
> > v4l-cx23418-dig.fw failing to load or initialize. Normal loading
> looks
> > somehting like this:
> >
> > [ 16.963093] firmware: requesting v4l-cx23418-cpu.fw
> > [ 18.302494] cx18-0: loaded v4l-cx23418-cpu.fw firmware (158332
> bytes)
> > [ 18.347998] firmware: requesting v4l-cx23418-apu.fw
> > [ 18.841280] cx18-0: loaded v4l-cx23418-apu.fw firmware V00120000
> (141200 bytes)
> > [ 18.847667] cx18-0: FW version: 0.0.74.0 (Release 2007/03/12)
> > [ 19.055046] firmware: requesting v4l-cx23418-cpu.fw
> > [ 19.397242] firmware: requesting v4l-cx23418-apu.fw
> > [ 19.845859] firmware: requesting v4l-cx23418-dig.fw
> > [ 20.368420] cx18-0 843: loaded v4l-cx23418-dig.fw firmware (16382
> bytes)
> > [ 20.409945] cx18-0 843: verified load of v4l-cx23418-dig.fw
> firmware (16382 bytes)
> >
> >
> > 3. Try recording from the Composite or SVideo in and audio line in
> > eliminate any problem with the audio processing in the MPEG encoder.
> >
> >
> >
> >
> > Don't worry about the audio being muted for now; that's normal. We
> rely
> > on the microcontroller to unmute the audio when it detetcts a valid
> TV
> > audio standard. And since the microcontroller isn't running....
> >
> >
> > -Andy
> >
> > >
> > > cx18-0: ================= START STATUS CARD #0 =================
> > > cx18-0: Version: 1.2.0 Card: Hauppauge HVR-1600
> > > tveeprom 0-0050: Hauppauge model 74041, rev C6B2, serial# 937559
> > > tveeprom 0-0050: MAC address is 00-0D-FE-0E-4E-57
> > > tveeprom 0-0050: tuner model is TCL M2523_5N_E (idx 112, type 50)
> > > tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
> > > tveeprom 0-0050: audio processor is CX23418 (idx 38)
> > > tveeprom 0-0050: decoder processor is CX23418 (idx 31)
> > > tveeprom 0-0050: has no radio, has IR receiver, has IR transmitter
> > > cx18-0 843: Video signal: present
> > > cx18-0 843: Detected format: NTSC-M
> > > cx18-0 843: Specified standard: NTSC-M
> > > cx18-0 843: Specified video input: Composite 7
> > > cx18-0 843: Specified audioclock freq: 32000 Hz
> > > cx18-0 843: Detected audio mode: mono
> > > cx18-0 843: Detected audio standard: no detected audio standard
> > > cx18-0 843: Audio muted: yes
> > > cx18-0 843: Audio microcontroller: stopped
> > > cx18-0 843: Configured audio standard: automatic detection
> > > cx18-0 843: Configured audio system: BTSC
> > > cx18-0 843: Specified audio input: Tuner (In8)
> > > cx18-0 843: Preferred audio mode: stereo
> > > cx18-0 gpio-reset-ctrl: GPIO: direction 0x00003001, value
> > > 0x00003001
> > > tuner 1-0061: Tuner mode: analog TV
> > > tuner 1-0061: Frequency: 61.25 MHz
> > > tuner 1-0061: Standard: 0x0000b000
> > > cs5345 0-004c: Input: 1
> > > cs5345 0-004c: Volume: 0 dB
> > > cx18-0: Video Input: Tuner 1
> > > cx18-0: Audio Input: Tuner 1
> > > cx18-0: GPIO: direction 0x00003001, value 0x00003001
> > > cx18-0: Tuner: TV
> > > cx18-0: Stream: MPEG-2 Program Stream
> > > cx18-0: VBI Format: No VBI
> > > cx18-0: Video: 720x480, 30 fps
> > > cx18-0: Video: MPEG-2, 4x3, Variable Bitrate, 4500000, Peak
> > > 6000000
> > > cx18-0: Video: GOP Size 15, 2 B-Frames, GOP Closure
> > > cx18-0: Audio: 32 kHz, MPEG-1/2 Layer II, 384 kbps, Stereo, No
> > > Emphasis, No CRC
> > > cx18-0: Spatial Filter: Manual, Luma 1D Horizontal, Chroma 1D
> > > Horizontal, 0
> > > cx18-0: Temporal Filter: Manual, 8
> > > cx18-0: Median Filter: Off, Luma [0, 255], Chroma [0, 255]
> > > cx18-0: Status flags: 0x00200001
> > > cx18-0: Stream encoder MPEG: status 0x0000, 0% of 2048 KiB (64
> > > buffers) in use
> > > cx18-0: Stream encoder YUV: status 0x0000, 0% of 2048 KiB (16
> > > buffers) in use
> > > cx18-0: Stream encoder VBI: status 0x0000, 0% of 1015 KiB (20
> > > buffers) in use
> > > cx18-0: Stream encoder PCM audio: status 0x0000, 0% of 1024 KiB
> > > (256 buffers) in use
> > > cx18-0: Read MPEG/VBI: 47030272/0 bytes
> > > cx18-0: ================== END STATUS CARD #0 ==================
> > >

_______________________________________________
ivtv-users mailing list
ivtv-users [at] ivtvdriver
http://ivtvdriver.org/mailman/listinfo/ivtv-users

linux51 at hotmail

Aug 25, 2009, 4:36 PM

Post #7 of 7 (1976 views)
Permalink

Re: cx18 anlog tv tuner picture but now audio [In reply to]

I guess some good news and bad news. When I mute and unmute I can see the audio controller stop then start again and everything else goes smoothly but when I check the audio standard I get the output:

cx18-0 843: Detected audio standard: no detected audio standard
cx18-0 843: Configured audio standard: automatic detection

and when I use mplayer I get video but still now audio.

Jayme

> From: awalls [at] radix
> To: ivtv-users [at] ivtvdriver
> Date: Mon, 24 Aug 2009 20:28:05 -0400
> Subject: Re: [ivtv-users] cx18 anlog tv tuner picture but now audio
>
> On Sun, 2009-08-23 at 19:25 -0400, Jayme Shaffer wrote:
> > Well I checked the hash and it is fine. When I do dmesg | grep v4l I
> > get:
> >
> > cx18 0000:01:05.0: firmware: requesting v4l-cx23418-cpu.fw
> > cx18-0: loaded v4l-cx23418-cpu.fw firmware (158332 bytes)
> > cx18 0000:01:05.0: firmware: requesting v4l-cx23418-apu.fw
> > cx18-0: loaded v4l-cx23418-apu.fw firmware V00120000 (141200 bytes)
> > cx18 0000:01:05.0: firmware: requesting v4l-cx23418-cpu.fw
> > cx18 0000:01:05.0: firmware: requesting v4l-cx23418-apu.fw
> > ivtv 0000:01:06.0: firmware: requesting v4l-cx2341x-enc.fw
> > ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
> > cx18 0000:01:05.0: firmware: requesting v4l-cx23418-dig.fw
> > cx18-0 843: loaded v4l-cx23418-dig.fw firmware (16382 bytes)
> > cx18-0 843: verified load of v4l-cx23418-dig.fw firmware (16382 bytes)
>
> OK good.
>
> > I tried using the svideo input and through myth I get now sound which
> > might be a config issue on my part but when I do cat /dev/video1 >
> > test.mpg I get audio and video. But when I issue the same command and
> > the input is on tuner with a good channel I get video and no audio
> > when using cat and still no audio in myth. Here is a log status
> > output when I'm using s-video:
>
> > Don't know if it helps..
>
> OK S-video works.
>
> (BTW, I tested my DTV set top box analog RF output into the HVR-1600
> with the latest v4l-dvb drivers on Fedora 9 (2.26.27) on a 64 bit
> machine. The tuner audio came through fine for me.)
>
>
> So:
>
> 1. the microcontroller firmware image is correct
> 2. the firmware image bytes are written to the microcontroller properly
> 3. line-in audio, that bypasses this audio controller, works
>
> Yet the microcontroller is both stopped and muted.
>
> What can be wrong:
>
> 1. The firmware image pointer the kernel provided to the driver is bad -
> very unlikely
>
> 2. The register writes to start up the microcontroller are failing -
> very unlikely since all the other register writes seem to be working
> fine
>
> 3. Something is actively muting the tuner audio - the most likely cause.
> Probably something from user space is muting the audio.
>
>
> What to do:
>
> Stop the mythbackend, then
>
> $ v4l2-ctl -d /dev/video0 -i 0
> Video input set to 0 (Tuner 1)
>
> $ ivtv-tune -d /dev/video0 -t us-cable -c 4 (or whatever channel)
> /dev/video0: 67.250 MHz
>
> $ v4l2-ctl -d /dev/video0 -c audio_sampling_frequency=1 ( 48 ksps )
>
> $ v4l2-ctl -d /dev/video0 -C audio_sampling_frequency
> audio_sampling_frequency: 1
>
> $ v4l2-ctl -d /dev/video0 -c mute=1
>
> $ v4l2-ctl -d /dev/video0 --log-status | grep microcontroller
> cx18-0 843: Audio microcontroller: stopped
>
> $ v4l2-ctl -d /dev/video0 -c mute=0
>
> $ v4l2-ctl -d /dev/video0 --log-status | grep microcontroller
> cx18-0 843: Audio microcontroller: running (should be running!)
>
> $ v4l2-ctl -d /dev/video0 --log-status | grep 'audio standard'
> cx18-0 843: Detected audio standard: BTSC
> cx18-0 843: Configured audio standard: automatic detection
>
> $ mplayer /dev/video0 -cache 8192
>
> And you should be seeing US cable channel 4 with audio.
>
> The critical step above is that disabling the mute starts the audio
> controller running. If that doesn't happen, we'll have to start some
> serious troubleshooting.
>
>
>
>
>
>
> > Jayme
> >
> > > From: awalls [at] radix
> > > To: ivtv-users [at] ivtvdriver
> > > Date: Fri, 21 Aug 2009 22:26:26 -0400
> > > Subject: Re: [ivtv-users] cx18 anlog tv tuner picture but now audio
> > >
> > > On Fri, 2009-08-21 at 18:24 -0400, Jayme Shaffer wrote:
> > > > Thanks for your help so far. With me juggling settings it is now
> > > > video0 still no audio. I checked all of the options under the
> > > > advanced volume control and no luck. Here is the output for the
> > card.
> > > > I see a few things that sand out that might be nothing or might be
> > the
> > > > issue. "no detected audio standard" is one "audio muted yes" is
> > > > another ant the last is the "audio microcontroller: stopped". I
> > > > looked up the mute command for v4l2-ctl and tried that as well but
> > no
> > > > luck.
> > > .
> > > It looks like the "audio standard auto-detection microcontroller
> > > firmware" (whew!) didn't get loaded properly.
> > >
> > > Some things to do:
> > >
> > > 1. Check to make sure that /lib/frimware (or wherever) has
> > > v4l-cx23418-dig.fw in it, it is readable, and has a good hash:
> > >
> > > $ sha256sum /lib/firmware/v4l-cx23418-dig.fw
> > >
> > fd545dcb14f40e0666b95fdb3a73356e34ee282c217b96fc2740747ce1c5b0c4 /lib/firmware/v4l-cx23418-dig.fw
> > >
> > >
> > > 2. Check for errors in dmesg or /var/log/messages related to
> > > v4l-cx23418-dig.fw failing to load or initialize. Normal loading
> > looks
> > > somehting like this:
> > >
> > > [ 16.963093] firmware: requesting v4l-cx23418-cpu.fw
> > > [ 18.302494] cx18-0: loaded v4l-cx23418-cpu.fw firmware (158332
> > bytes)
> > > [ 18.347998] firmware: requesting v4l-cx23418-apu.fw
> > > [ 18.841280] cx18-0: loaded v4l-cx23418-apu.fw firmware V00120000
> > (141200 bytes)
> > > [ 18.847667] cx18-0: FW version: 0.0.74.0 (Release 2007/03/12)
> > > [ 19.055046] firmware: requesting v4l-cx23418-cpu.fw
> > > [ 19.397242] firmware: requesting v4l-cx23418-apu.fw
> > > [ 19.845859] firmware: requesting v4l-cx23418-dig.fw
> > > [ 20.368420] cx18-0 843: loaded v4l-cx23418-dig.fw firmware (16382
> > bytes)
> > > [ 20.409945] cx18-0 843: verified load of v4l-cx23418-dig.fw
> > firmware (16382 bytes)
> > >
> > >
> > > 3. Try recording from the Composite or SVideo in and audio line in
> > > eliminate any problem with the audio processing in the MPEG encoder.
> > >
> > >
> > >
> > >
> > > Don't worry about the audio being muted for now; that's normal. We
> > rely
> > > on the microcontroller to unmute the audio when it detetcts a valid
> > TV
> > > audio standard. And since the microcontroller isn't running....
> > >
> > >
> > > -Andy
> > >
> > > >
> > > > cx18-0: ================= START STATUS CARD #0 =================
> > > > cx18-0: Version: 1.2.0 Card: Hauppauge HVR-1600
> > > > tveeprom 0-0050: Hauppauge model 74041, rev C6B2, serial# 937559
> > > > tveeprom 0-0050: MAC address is 00-0D-FE-0E-4E-57
> > > > tveeprom 0-0050: tuner model is TCL M2523_5N_E (idx 112, type 50)
> > > > tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
> > > > tveeprom 0-0050: audio processor is CX23418 (idx 38)
> > > > tveeprom 0-0050: decoder processor is CX23418 (idx 31)
> > > > tveeprom 0-0050: has no radio, has IR receiver, has IR transmitter
> > > > cx18-0 843: Video signal: present
> > > > cx18-0 843: Detected format: NTSC-M
> > > > cx18-0 843: Specified standard: NTSC-M
> > > > cx18-0 843: Specified video input: Composite 7
> > > > cx18-0 843: Specified audioclock freq: 32000 Hz
> > > > cx18-0 843: Detected audio mode: mono
> > > > cx18-0 843: Detected audio standard: no detected audio standard
> > > > cx18-0 843: Audio muted: yes
> > > > cx18-0 843: Audio microcontroller: stopped
> > > > cx18-0 843: Configured audio standard: automatic detection
> > > > cx18-0 843: Configured audio system: BTSC
> > > > cx18-0 843: Specified audio input: Tuner (In8)
> > > > cx18-0 843: Preferred audio mode: stereo
> > > > cx18-0 gpio-reset-ctrl: GPIO: direction 0x00003001, value
> > > > 0x00003001
> > > > tuner 1-0061: Tuner mode: analog TV
> > > > tuner 1-0061: Frequency: 61.25 MHz
> > > > tuner 1-0061: Standard: 0x0000b000
> > > > cs5345 0-004c: Input: 1
> > > > cs5345 0-004c: Volume: 0 dB
> > > > cx18-0: Video Input: Tuner 1
> > > > cx18-0: Audio Input: Tuner 1
> > > > cx18-0: GPIO: direction 0x00003001, value 0x00003001
> > > > cx18-0: Tuner: TV
> > > > cx18-0: Stream: MPEG-2 Program Stream
> > > > cx18-0: VBI Format: No VBI
> > > > cx18-0: Video: 720x480, 30 fps
> > > > cx18-0: Video: MPEG-2, 4x3, Variable Bitrate, 4500000, Peak
> > > > 6000000
> > > > cx18-0: Video: GOP Size 15, 2 B-Frames, GOP Closure
> > > > cx18-0: Audio: 32 kHz, MPEG-1/2 Layer II, 384 kbps, Stereo, No
> > > > Emphasis, No CRC
> > > > cx18-0: Spatial Filter: Manual, Luma 1D Horizontal, Chroma 1D
> > > > Horizontal, 0
> > > > cx18-0: Temporal Filter: Manual, 8
> > > > cx18-0: Median Filter: Off, Luma [0, 255], Chroma [0, 255]
> > > > cx18-0: Status flags: 0x00200001
> > > > cx18-0: Stream encoder MPEG: status 0x0000, 0% of 2048 KiB (64
> > > > buffers) in use
> > > > cx18-0: Stream encoder YUV: status 0x0000, 0% of 2048 KiB (16
> > > > buffers) in use
> > > > cx18-0: Stream encoder VBI: status 0x0000, 0% of 1015 KiB (20
> > > > buffers) in use
> > > > cx18-0: Stream encoder PCM audio: status 0x0000, 0% of 1024 KiB
> > > > (256 buffers) in use
> > > > cx18-0: Read MPEG/VBI: 47030272/0 bytes
> > > > cx18-0: ================== END STATUS CARD #0 ==================
> > > >
>
>
> _______________________________________________
> ivtv-users mailing list
> ivtv-users [at] ivtvdriver
> http://ivtvdriver.org/mailman/listinfo/ivtv-users

_________________________________________________________________
Windows Live: Make it easier for your friends to see what you’re up to on Facebook.
http://windowslive.com/Campaign/SocialNetworking?ocid=PID23285::T:WLMTAGL:ON:WL:en-US:SI_SB_facebook:082009

Index | Next | Previous | View Threaded

Interested in having your list archived? Contact Gossamer Threads