
cdash at operamail
Nov 27, 2008, 7:36 PM
Post #5 of 25
(7957 views)
Permalink
|
|
Re: cx18 Have 2 installed HVR-1600s, 1 never records audio
[In reply to]
|
|
Andy, I tried this and still got no audio: v4l2-ctl --device=/dev/video0 --set-input=1 sleep 5 v4l2-ctl --device=/dev/video0 --set-ctrl=audio_mute=0 sleep 5 v4l2-ctl --device=/dev/video0 --set-input=0 sleep 5 v4l2-ctl --device=/dev/video0 --set-ctrl=audio_mute=0 I am splitting my signal 5 ways with the aid of a signal booster, but when I directly plug in the originating source feed coax cable I still get no audio. The only 2 things that have changed are: 1) Switched the PVR-150 with a new HVR-1600 both had FM and no IR 2) Ran another coax cable from an empty terminal on my splitter to the HVR-1600, one was already run because of the PVR-150 that was removed I kind of thought if something turned out to not work it would be with the new HVR-1600 (/dev/video1) not the HVR-1600 that was already in the system that was already working well (/dev/video0). These logs were made with 2 instances of mplayer running and both tuners tuned to the same channel. Thanks! --- v4l2-dbg -d /dev/video0 -R type=host --log-status ioctl: VIDIOC_DBG_G_REGISTER 00 04 08 0C 10 14 18 1C 02000000: 00000000 00000000 0001ec00 000a03fe 00000000 00080000 00000000 00000010 02000020: fffcdc66 000a0000 000a0000 00000000 fffcff0d 00000000 00000000 00000000 02000040: 00000000 00000010 00000000 00000000 00138241 00000000 000c0201 0015edff 02000060: 00000010 00000010 00000000 00000000 000e0a02 000bf600 00080000 00000000 02000080: 00000000 00000ad0 00000010 00000000 000a0000 000bfdfe 000fffff 00000010 020000a0: 00120200 000a0000 000e0000 000c0000 00000000 0000b200 00000000 00000010 020000c0: 00000890 0000b200 00000000 00000000 0001f9ee 0001f7f1 00000000 00000ac8 020000e0: 00000000 0001e7f1 0001e7f1 00080088 00000010 0001e3ef 0001e1e8 00000000 Status Log: cx18-0: ================= START STATUS CARD #0 ================= tveeprom 1-0050: Hauppauge model 74041, rev C6B2, serial# XXXXXXX tveeprom 1-0050: MAC address is XX-XX-XX-XX-XX-XX tveeprom 1-0050: tuner model is TCL M2523_5N_E (idx 112, type 50) tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 1-0050: audio processor is CX23418 (idx 38) tveeprom 1-0050: decoder processor is CX23418 (idx 31) tveeprom 1-0050: has no radio, has IR receiver, has IR transmitter cx18-0: Video signal: present cx18-0: Detected format: NTSC-M cx18-0: Specified standard: NTSC-M cx18-0: Specified video input: Composite 7 cx18-0: Specified audioclock freq: 48000 Hz cx18-0: Detected audio mode: mono cx18-0: Detected audio standard: no detected audio standard cx18-0: Audio muted: yes cx18-0: Audio microcontroller: running cx18-0: Configured audio standard: automatic detection cx18-0: Configured audio system: BTSC cx18-0: Specified audio input: Tuner (In8) cx18-0: Preferred audio mode: stereo cs5345 1-004c: Input: 1 cs5345 1-004c: Volume: 0 dB tuner 2-0061: Tuner mode: analog TV tuner 2-0061: Frequency: 475.25 MHz tuner 2-0061: Standard: 0x0000b000 cx18-0: Video Input: Tuner 1 cx18-0: Audio Input: Tuner 1 cx18-0: GPIO: direction 0x00003001, value 0x00003001 cx18-0: Tuner: TV cx18-0: Stream: MPEG-2 Program Stream cx18-0: VBI Format: No VBI cx18-0: Video: 720x480, 30 fps cx18-0: Video: MPEG-2, 4x3, Variable Bitrate, 6000000, Peak 8000000 cx18-0: Video: GOP Size 15, 2 B-Frames, GOP Closure cx18-0: Audio: 48 kHz, MPEG-1/2 Layer II, 224 kbps, Stereo, No Emphasis, No CRC cx18-0: Spatial Filter: Manual, Luma 1D Horizontal, Chroma 1D Horizontal, 0 cx18-0: Temporal Filter: Manual, 8 cx18-0: Median Filter: Off, Luma [0, 255], Chroma [0, 255] cx18-0: Status flags: 0x00200001 cx18-0: Stream encoder MPEG: status 0x0118, 4% of 2016 KiB (63 buffers) in use cx18-0: Stream encoder YUV: status 0x0000, 0% of 2048 KiB (16 buffers) in use cx18-0: Stream encoder PCM audio: status 0x0000, 0% of 1008 KiB (63 buffers) in use cx18-0: Read MPEG/VBI: 25866240/0 bytes cx18-0: ================== END STATUS CARD #0 ================== --- v4l2-dbg -d /dev/video1 -R type=host --log-status ioctl: VIDIOC_DBG_G_REGISTER 00 04 08 0C 10 14 18 1C 02000000: 0000b200 000019c8 00000000 00000000 00000000 0009fc00 000603fa 0003e1f0 02000020: 0001e1f0 00000000 00000010 00080000 00000000 00000000 00020000 00020001 02000040: 00003c68 00000000 00008e01 0003fe00 00000000 00000000 00000000 00000000 02000060: 00000000 00004050 00000000 00000000 0013032a 00080bf4 0009fff5 00000000 02000080: 00003f08 00000000 001303b1 000e0001 00000000 00000000 000a01f0 0007ffff 020000a0: 00000000 00003590 00000000 00000000 00000000 00000000 d4001700 00000010 020000c0: 00000010 00000010 00000010 00000010 0000b200 0001f200 00000000 00000000 020000e0: 001a1001 00000010 00000000 001a0001 002c0001 0023f202 00000000 8d043441 Status Log: cx18-1: ================= START STATUS CARD #1 ================= tveeprom 3-0050: Hauppauge model 74541, rev C6B6, serial# XXXXXXX tveeprom 3-0050: MAC address is XX-XX-XX-XX-XX-XX tveeprom 3-0050: tuner model is Philips FM1236 MK5 (idx 116, type 43) tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 3-0050: audio processor is CX23418 (idx 38) tveeprom 3-0050: decoder processor is CX23418 (idx 31) tveeprom 3-0050: has radio cx18-1: Video signal: present cx18-1: Detected format: NTSC-M cx18-1: Specified standard: NTSC-M cx18-1: Specified video input: Composite 7 cx18-1: Specified audioclock freq: 48000 Hz cx18-1: Detected audio mode: stereo with SAP cx18-1: Detected audio standard: BTSC cx18-1: Audio muted: no cx18-1: Audio microcontroller: running cx18-1: Configured audio standard: automatic detection cx18-1: Configured audio system: BTSC cx18-1: Specified audio input: Tuner (In8) cx18-1: Preferred audio mode: stereo cs5345 3-004c: Input: 1 cs5345 3-004c: Volume: 0 dB tda9887 4-0043: Data bytes: b=0x14 c=0x30 e=0x44 tuner 4-0061: Tuner mode: analog TV tuner 4-0061: Frequency: 475.25 MHz tuner 4-0061: Standard: 0x0000b000 cx18-1: Video Input: Tuner 1 cx18-1: Audio Input: Tuner 1 cx18-1: GPIO: direction 0x00003001, value 0x00003001 cx18-1: Tuner: TV cx18-1: Stream: MPEG-2 Program Stream cx18-1: VBI Format: No VBI cx18-1: Video: 720x480, 30 fps cx18-1: Video: MPEG-2, 4x3, Variable Bitrate, 6000000, Peak 8000000 cx18-1: Video: GOP Size 15, 2 B-Frames, GOP Closure cx18-1: Audio: 48 kHz, MPEG-1/2 Layer II, 224 kbps, Stereo, No Emphasis, No CRC cx18-1: Spatial Filter: Manual, Luma 1D Horizontal, Chroma 1D Horizontal, 0 cx18-1: Temporal Filter: Manual, 8 cx18-1: Median Filter: Off, Luma [0, 255], Chroma [0, 255] cx18-1: Status flags: 0x00200001 cx18-1: Stream encoder MPEG: status 0x0118, 3% of 2016 KiB (63 buffers) in use cx18-1: Stream encoder YUV: status 0x0000, 0% of 2048 KiB (16 buffers) in use cx18-1: Stream encoder PCM audio: status 0x0000, 0% of 1008 KiB (63 buffers) in use cx18-1: Read MPEG/VBI: 16779264/0 bytes cx18-1: ================== END STATUS CARD #1 ================== -- _______________________________________________ Surf the Web in a faster, safer and easier way: Download Opera 9 at http://www.opera.com Powered by Outblaze _______________________________________________ ivtv-users mailing list ivtv-users [at] ivtvdriver http://ivtvdriver.org/mailman/listinfo/ivtv-users
|