etrounce at look
Sep 17, 2007, 12:07 PM
Views: 560
Permalink
|
|
yet another unable to open firmware thread...
|
|
Sorry for this, however I've read all of the other threads and none of
them seemed to solve my problem. I'm running Debian Etch with a custom
compiled kernel version 2.6.22.5. I followed the how-to as well as I
could, but no matter what I did I get the following in /var/log/dmesg:
Linux video capture interface: v2.00
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
ivtv: ==================== START INIT IVTV ====================
ivtv: version 1.0.0 (2.6.22.5 mod_unload PENTIUM4 ) loading
ivtv0: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18
*ivtv0: unable to open firmware v4l-cx2341x-enc.fw (must be 376836 bytes)*
ivtv0: did you put the firmware in the hotplug firmware directory?
ivtv0: Retry loading firmware
ivtv0: unable to open firmware v4l-cx2341x-enc.fw (must be 376836 bytes)
ivtv0: did you put the firmware in the hotplug firmware directory?
ivtv0: Error initializing firmware
ivtv0: Error -19 on initialization
ivtv: ==================== END INIT IVTV ====================
I'm using udev 114, and hotplug has been removed/purged. The firware
was downloaded from here:
http://dl.ivtvdriver.org/ivtv/firmware/firmware.tar.gz
and extracted into my /lib/firmware directory as well as
/usr/local/lib/firmware and /usr/lib/hotplug/firmware. The
/lib/udev/hotplug.functions lists those three directories for
FIRMWARE_DIRS. I verified that v4l-cx2341x-enc.fw is the right size
(376836 bytes).
I'd really appreciate some help with this.
Cheers,
Erik
|
yet another unable to open firmware thread...
