kare0028 at tc
Mar 6, 2007, 5:09 PM
Post #1 of 1
(480 views)
Permalink
|
|
Problems loading IVTV_FB 10.1 on FC6.
|
|
I'm having some problems getting X-Windows to run on my PVR-350. I'm
running Fedora Core 6, kernel version 2.6.19-1.2911.6.5. IVTV version
10.1-126. This box was just rebuilt, and IVTV packages installed via the
ATRPMS repo. I had the same problems with 2.6.19-1.2911.6.4, and just
updated today without any change.
It appears I'm having some problems loading the ivtv-fb module. Here's
the error I wind up with when trying to load it manually:
$modprobe ivtv
$modprobe ivtv-fb
FATAL: Error inserting ivtv_fb
(/lib/modules/2.6.19-1.2911.6.5.fc6/updates/drivers/media/video/ivtv-fb.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
The related dmesg output:
ivtv_fb: disagrees about version of symbol ivtv_vapi_result
ivtv_fb: Unknown symbol ivtv_vapi_result
ivtv_fb: disagrees about version of symbol ivtv_udma_alloc
ivtv_fb: Unknown symbol ivtv_udma_alloc
ivtv_fb: disagrees about version of symbol ivtv_udma_unmap
ivtv_fb: Unknown symbol ivtv_udma_unmap
ivtv_fb: disagrees about version of symbol ivtv_vapi
ivtv_fb: Unknown symbol ivtv_vapi
ivtv_fb: disagrees about version of symbol ivtv_udma_prepare
ivtv_fb: Unknown symbol ivtv_udma_prepare
ivtv_fb: disagrees about version of symbol ivtv_cards
ivtv_fb: Unknown symbol ivtv_cards
ivtv_fb: disagrees about version of symbol ivtv_udma_setup
ivtv_fb: Unknown symbol ivtv_udma_setup
From what (little) I know, this can be an issue when the ivtv module is
of a different version than the running kernel. But I that doesn't seem to
be the case:
$rpm -qa --qf '%{name}-%{version}-%{release}.%{arch}\n' | egrep
"^ivtv|kernel"
kernel-headers-2.6.19-1.2911.6.5.fc6.i386
ivtv-kmdl-2.6.19-1.2911.6.5.fc6-0.10.1-126.fc6.at.i686
ivtv-firmware-20070217-13.at.noarch
kernel-2.6.19-1.2911.6.5.fc6.i686
ivtv_xdriver-0.10.7-8_r3843.fc6.at.i386
ivtv-0.10.1-126.fc6.at.i386
$uname -a
Linux localhost.localdomain 2.6.19-1.2911.6.5.fc6 #1 SMP Sun Mar 4 16:41:13
EST 2007 i686 athlon i386 GNU/Linux
I know I've been smacked by the bug in the FC6 installer choosing i586
packages before, but it doesn't appear to be a problem here either:
$rpm -qa --qf '%{name}-%{version}-%{release}.%{arch}\n' | grep 586
$
Here's the output from INIT IVTV:
Linux video capture interface: v2.00
ivtv: ==================== START INIT IVTV ====================
ivtv: version 1.0.0 (2.6.19-1.2911.6.5.fc6 SMP mod_unload 686 REGPARM
4KSTACKS ) loading
ivtv0: Autodetected Hauppauge card (cx23415 based)
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 10 (level, low) ->
IRQ 10
ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02060039
ivtv0: Decoder revision: 0x02020023
saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
tveeprom 0-0050: Hauppauge model 48132, rev K168, serial# 8809471
tveeprom 0-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47)
tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 0-0050: audio processor is MSP4448 (idx 27)
tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter
ivtv0: Autodetected Hauppauge WinTV PVR-350
tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
msp3400 0-0040: MSP4448G-B3 found @ 0x80 (ivtv i2c driver #0)
msp3400 0-0040: MSP4448G-B3 supports radio, mode is autodetect and
autoselect
ivtv0: Registered device video0 for encoder MPEG (4 MB)
ivtv0: Registered device video32 for encoder YUV (2 MB)
ivtv0: Registered device vbi0 for encoder VBI (1 MB)
ivtv0: Registered device video24 for encoder PCM audio (1 MB)
ivtv0: Registered device radio0 for encoder radio
ivtv0: Registered device video16 for decoder MPEG (1 MB)
ivtv0: Registered device vbi8 for decoder VBI (1 MB)
ivtv0: Registered device vbi16 for decoder VOUT
ivtv0: Registered device video48 for decoder YUV (1 MB)
ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
tuner 0-0061: type set to 47 (LG NTSC (TAPE series))
ivtv0: Initialized Hauppauge WinTV PVR-350, card #0
ivtv: ==================== END INIT IVTV ====================
Thanks in advance for any assistance with this.
--Christopher Karel
_______________________________________________
ivtv-users mailing list
ivtv-users [at] ivtvdriver
http://ivtvdriver.org/mailman/listinfo/ivtv-users
|
