Login | Register For Free | Help
Search for: (Advanced)

Mailing List Archive: ivtv: users

Xv and MythTv

 

 

ivtv users RSS feed   Index | Next | Previous | View Threaded


tkramer at hampshire

Oct 14, 2005, 11:48 PM

Post #1 of 13 (1128 views)
Permalink
Xv and MythTv

Hello,

I am trying to use the new Xv support (ivtv_xdriver-0.10.6-3.rhfc4.at)
to drive my PVR-350. I am running VIA EPIA ME6000 (600Mhz) board. I
can get the Xv stuff to work fine in mplayer (mplayer -vo xv
test.mpeg2) but when I change the myth setting to not use the PVR-350
output I get constant "prebuffering pause" making it unwatchable. Has
anyone else run into this? Is there a setting somewhere I missed? I
also unchecked the XvMC option since myth wouldn't show anything when
that was selected. Thanks,

Trevor


tkramer at hampshire

Oct 15, 2005, 12:42 AM

Post #2 of 13 (1099 views)
Permalink
Xv and MythTv [In reply to]

Hello,

I am trying to use the new Xv support (ivtv_xdriver-0.10.6-3.rhfc4.at)
to drive my PVR-350. I am running VIA EPIA ME6000 (600Mhz) board. I
can get the Xv stuff to work fine in mplayer (mplayer -vo xv
test.mpeg2) but when I change the myth setting to not use the PVR-350
output I get constant "prebuffering pause" making it unwatchable. Has
anyone else run into this? Is there a setting somewhere I missed? I
also unchecked the XvMC option since myth wouldn't show anything when
that was selected. Thanks,

Trevor


ivtv at kosteronline

Oct 15, 2005, 9:45 AM

Post #3 of 13 (1102 views)
Permalink
Xv and MythTv [In reply to]

Trevor Kramer wrote:
> Hello,
>
> I am trying to use the new Xv support (ivtv_xdriver-0.10.6-3.rhfc4.at)
> to drive my PVR-350. I am running VIA EPIA ME6000 (600Mhz) board. I can
> get the Xv stuff to work fine in mplayer (mplayer -vo xv test.mpeg2) but
> when I change the myth setting to not use the PVR-350 output I get
> constant "prebuffering pause" making it unwatchable. Has anyone else
> run into this? Is there a setting somewhere I missed? I also unchecked
> the XvMC option since myth wouldn't show anything when that was
> selected. Thanks,

You unchecked 'Use PVR350 output), but did you check the related setting
'Use XV'? I've not verified the exact names but both options are in the
same set of configuration screens in Myth.

--
Paul


agforsyth at gmail

Oct 15, 2005, 10:07 AM

Post #4 of 13 (1103 views)
Permalink
Xv and MythTv [In reply to]

On 10/15/05, Paul Koster <ivtv [at] kosteronline> wrote:
> Trevor Kramer wrote:
> > Hello,
> >
> > I am trying to use the new Xv support (ivtv_xdriver-0.10.6-3.rhfc4.at)
> > to drive my PVR-350. I am running VIA EPIA ME6000 (600Mhz) board. I can
> > get the Xv stuff to work fine in mplayer (mplayer -vo xv test.mpeg2) but
> > when I change the myth setting to not use the PVR-350 output I get
> > constant "prebuffering pause" making it unwatchable. Has anyone else
> > run into this? Is there a setting somewhere I missed? I also unchecked
> > the XvMC option since myth wouldn't show anything when that was
> > selected. Thanks,

I'd say email mythtv-users as this is a mythtv problem, since XV is
working for other programs. Are you sure XV is working for mplayer?
look closely at it's output and make sure it isn't falling back to
x11/xshm

> You unchecked 'Use PVR350 output), but did you check the related setting
> 'Use XV'? I've not verified the exact names but both options are in the
> same set of configuration screens in Myth.

There is no use xv option in mythtv. It's the default (no optinos
checked = xv). You're thinking of the XvMC option.


tkramer at hampshire

Oct 15, 2005, 10:52 AM

Post #5 of 13 (1098 views)
Permalink
Xv and MythTv [In reply to]

Hello,

I am trying to use the new Xv support (ivtv_xdriver-0.10.6-3.rhfc4.at)
to drive my PVR-350. I am running VIA EPIA ME6000 (600Mhz) board. I
can get the Xv stuff to work fine in mplayer (mplayer -vo xv
test.mpeg2) but when I change the myth setting to not use the PVR-350
output I get constant "prebuffering pause" making it unwatchable. Has
anyone else run into this? Is there a setting somewhere I missed? I
also unchecked the XvMC option since myth wouldn't show anything when
that was selected. Thanks,

Trevor


tkramer at hampshire

Oct 15, 2005, 10:52 AM

Post #6 of 13 (1103 views)
Permalink
Xv and MythTv [In reply to]

Hello,

I am trying to use the new Xv support (ivtv_xdriver-0.10.6-3.rhfc4.at)
to drive my PVR-350. I am running VIA EPIA ME6000 (600Mhz) board. I
can get the Xv stuff to work fine in mplayer (mplayer -vo xv
test.mpeg2) but when I change the myth setting to not use the PVR-350
output I get constant "prebuffering pause" making it unwatchable. Has
anyone else run into this? Is there a setting somewhere I missed? I
also unchecked the XvMC option since myth wouldn't show anything when
that was selected. Thanks,

Trevor


tkramer at hampshire

Oct 15, 2005, 10:52 AM

Post #7 of 13 (1096 views)
Permalink
Xv and MythTv [In reply to]

Hello,

I am trying to use the new Xv support (ivtv_xdriver-0.10.6-3.rhfc4.at)
to drive my PVR-350. I am running VIA EPIA ME6000 (600Mhz) board. I
can get the Xv stuff to work fine in mplayer (mplayer -vo xv
test.mpeg2) but when I change the myth setting to not use the PVR-350
output I get constant "prebuffering pause" making it unwatchable. Has
anyone else run into this? Is there a setting somewhere I missed? I
also unchecked the XvMC option since myth wouldn't show anything when
that was selected. Thanks,

Trevor


tkramer at hampshire

Oct 20, 2005, 7:26 PM

Post #8 of 13 (1100 views)
Permalink
Xv and MythTv [In reply to]

So even though xv does work for mplayer it does use 100% of the cpu
while using the PVR-350 output in mythtv only uses 10%. Does that
sound right? Does xv not use the hardware decoder?

Trevor

On Oct 15, 2005, at 1:06 AM, Adam Forsyth wrote:

> On 10/15/05, Paul Koster <ivtv [at] kosteronline> wrote:
>
>> Trevor Kramer wrote:
>>
>>> Hello,
>>>
>>> I am trying to use the new Xv support
>>> (ivtv_xdriver-0.10.6-3.rhfc4.at)
>>> to drive my PVR-350. I am running VIA EPIA ME6000 (600Mhz)
>>> board. I can
>>> get the Xv stuff to work fine in mplayer (mplayer -vo xv
>>> test.mpeg2) but
>>> when I change the myth setting to not use the PVR-350 output I get
>>> constant "prebuffering pause" making it unwatchable. Has anyone
>>> else
>>> run into this? Is there a setting somewhere I missed? I also
>>> unchecked
>>> the XvMC option since myth wouldn't show anything when that was
>>> selected. Thanks,
>>>
>
> I'd say email mythtv-users as this is a mythtv problem, since XV is
> working for other programs. Are you sure XV is working for mplayer?
> look closely at it's output and make sure it isn't falling back to
> x11/xshm
>
>
>> You unchecked 'Use PVR350 output), but did you check the related
>> setting
>> 'Use XV'? I've not verified the exact names but both options are
>> in the
>> same set of configuration screens in Myth.
>>
>
> There is no use xv option in mythtv. It's the default (no optinos
> checked = xv). You're thinking of the XvMC option.
>
> _______________________________________________
> ivtv-users mailing list
> ivtv-users [at] ivtvdriver
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
>


tkramer at hampshire

Oct 20, 2005, 7:53 PM

Post #9 of 13 (1106 views)
Permalink
Xv and MythTv [In reply to]

So even though xv does work for mplayer it does use 100% of the cpu
while using the PVR-350 output in mythtv only uses 10%. Does that
sound right? Does xv not use the hardware decoder?

Trevor

On Oct 15, 2005, at 1:06 AM, Adam Forsyth wrote:

> On 10/15/05, Paul Koster <ivtv [at] kosteronline> wrote:
>
>> Trevor Kramer wrote:
>>
>>> Hello,
>>>
>>> I am trying to use the new Xv support
>>> (ivtv_xdriver-0.10.6-3.rhfc4.at)
>>> to drive my PVR-350. I am running VIA EPIA ME6000 (600Mhz)
>>> board. I can
>>> get the Xv stuff to work fine in mplayer (mplayer -vo xv
>>> test.mpeg2) but
>>> when I change the myth setting to not use the PVR-350 output I get
>>> constant "prebuffering pause" making it unwatchable. Has anyone
>>> else
>>> run into this? Is there a setting somewhere I missed? I also
>>> unchecked
>>> the XvMC option since myth wouldn't show anything when that was
>>> selected. Thanks,
>>>
>
> I'd say email mythtv-users as this is a mythtv problem, since XV is
> working for other programs. Are you sure XV is working for mplayer?
> look closely at it's output and make sure it isn't falling back to
> x11/xshm
>
>
>> You unchecked 'Use PVR350 output), but did you check the related
>> setting
>> 'Use XV'? I've not verified the exact names but both options are
>> in the
>> same set of configuration screens in Myth.
>>
>
> There is no use xv option in mythtv. It's the default (no optinos
> checked = xv). You're thinking of the XvMC option.
>
> _______________________________________________
> ivtv-users mailing list
> ivtv-users [at] ivtvdriver
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
>


tkramer at hampshire

Oct 20, 2005, 8:17 PM

Post #10 of 13 (1101 views)
Permalink
Xv and MythTv [In reply to]

So even though xv does work for mplayer it does use 100% of the cpu
while using the PVR-350 output in mythtv only uses 10%. Does that
sound right? Does xv not use the hardware decoder?

Trevor

On Oct 15, 2005, at 1:06 AM, Adam Forsyth wrote:

> On 10/15/05, Paul Koster <ivtv [at] kosteronline> wrote:
>
>> Trevor Kramer wrote:
>>
>>> Hello,
>>>
>>> I am trying to use the new Xv support
>>> (ivtv_xdriver-0.10.6-3.rhfc4.at)
>>> to drive my PVR-350. I am running VIA EPIA ME6000 (600Mhz)
>>> board. I can
>>> get the Xv stuff to work fine in mplayer (mplayer -vo xv
>>> test.mpeg2) but
>>> when I change the myth setting to not use the PVR-350 output I get
>>> constant "prebuffering pause" making it unwatchable. Has anyone
>>> else
>>> run into this? Is there a setting somewhere I missed? I also
>>> unchecked
>>> the XvMC option since myth wouldn't show anything when that was
>>> selected. Thanks,
>>>
>
> I'd say email mythtv-users as this is a mythtv problem, since XV is
> working for other programs. Are you sure XV is working for mplayer?
> look closely at it's output and make sure it isn't falling back to
> x11/xshm
>
>
>> You unchecked 'Use PVR350 output), but did you check the related
>> setting
>> 'Use XV'? I've not verified the exact names but both options are
>> in the
>> same set of configuration screens in Myth.
>>
>
> There is no use xv option in mythtv. It's the default (no optinos
> checked = xv). You're thinking of the XvMC option.
>
> _______________________________________________
> ivtv-users mailing list
> ivtv-users [at] ivtvdriver
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
>


tkramer at hampshire

Oct 20, 2005, 8:32 PM

Post #11 of 13 (1098 views)
Permalink
Xv and MythTv [In reply to]

So even though xv does work for mplayer it does use 100% of the cpu
while using the PVR-350 output in mythtv only uses 10%. Does that
sound right? Does xv not use the hardware decoder?

Trevor

On Oct 15, 2005, at 1:06 AM, Adam Forsyth wrote:

> On 10/15/05, Paul Koster <ivtv [at] kosteronline> wrote:
>
>> Trevor Kramer wrote:
>>
>>> Hello,
>>>
>>> I am trying to use the new Xv support
>>> (ivtv_xdriver-0.10.6-3.rhfc4.at)
>>> to drive my PVR-350. I am running VIA EPIA ME6000 (600Mhz)
>>> board. I can
>>> get the Xv stuff to work fine in mplayer (mplayer -vo xv
>>> test.mpeg2) but
>>> when I change the myth setting to not use the PVR-350 output I get
>>> constant "prebuffering pause" making it unwatchable. Has anyone
>>> else
>>> run into this? Is there a setting somewhere I missed? I also
>>> unchecked
>>> the XvMC option since myth wouldn't show anything when that was
>>> selected. Thanks,
>>>
>
> I'd say email mythtv-users as this is a mythtv problem, since XV is
> working for other programs. Are you sure XV is working for mplayer?
> look closely at it's output and make sure it isn't falling back to
> x11/xshm
>
>
>> You unchecked 'Use PVR350 output), but did you check the related
>> setting
>> 'Use XV'? I've not verified the exact names but both options are
>> in the
>> same set of configuration screens in Myth.
>>
>
> There is no use xv option in mythtv. It's the default (no optinos
> checked = xv). You're thinking of the XvMC option.
>
> _______________________________________________
> ivtv-users mailing list
> ivtv-users [at] ivtvdriver
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
>


antdaniel at gmail

Oct 20, 2005, 11:59 PM

Post #12 of 13 (1102 views)
Permalink
Xv and MythTv [In reply to]

On 10/20/05, Trevor Kramer <tkramer [at] hampshire> wrote:
>
> So even though xv does work for mplayer it does use 100% of the cpu
> while using the PVR-350 output in mythtv only uses 10%. Does that
> sound right? Does xv not use the hardware decoder?
>
> Trevor
>
> On Oct 15, 2005, at 1:06 AM, Adam Forsyth wrote:
>
> > On 10/15/05, Paul Koster <ivtv [at] kosteronline> wrote:
> >
> >> Trevor Kramer wrote:
> >>
> >>> Hello,
> >>>
> >>> I am trying to use the new Xv support
> >>> (ivtv_xdriver-0.10.6-3.rhfc4.at <http://0.10.6-3.rhfc4.at>)
> >>> to drive my PVR-350. I am running VIA EPIA ME6000 (600Mhz)
> >>> board. I can
> >>> get the Xv stuff to work fine in mplayer (mplayer -vo xv
> >>> test.mpeg2) but
> >>> when I change the myth setting to not use the PVR-350 output I get
> >>> constant "prebuffering pause" making it unwatchable. Has anyone
> >>> else
> >>> run into this? Is there a setting somewhere I missed? I also
> >>> unchecked
> >>> the XvMC option since myth wouldn't show anything when that was
> >>> selected. Thanks,
> >>>
> >
> > I'd say email mythtv-users as this is a mythtv problem, since XV is
> > working for other programs. Are you sure XV is working for mplayer?
> > look closely at it's output and make sure it isn't falling back to
> > x11/xshm
> >
> >
> >> You unchecked 'Use PVR350 output), but did you check the related
> >> setting
> >> 'Use XV'? I've not verified the exact names but both options are
> >> in the
> >> same set of configuration screens in Myth.
> >>
> >
> > There is no use xv option in mythtv. It's the default (no optinos
> > checked = xv). You're thinking of the XvMC option.
> >
> > _______________________________________________
> > ivtv-users mailing list
> > ivtv-users [at] ivtvdriver
> > http://ivtvdriver.org/mailman/listinfo/ivtv-users
> >
>
>
> _______________________________________________
> ivtv-users mailing list
> ivtv-users [at] ivtvdriver
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
>

100% for xv playback doesn't sound right. It more likely that mplayer is not
using xv. This might indicate a problem with the setuo of xv.
What version of ivtv are you using.
Can you please post you X.org.log output, for Fedora this is in the /var/log
directory.

Ant.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.ivtvdriver.org/pipermail/ivtv-users/attachments/20051020/0f9c305b/attachment-0001.html


tkramer at hampshire

Oct 21, 2005, 1:14 AM

Post #13 of 13 (1104 views)
Permalink
Xv and MythTv [In reply to]

Here is my X org log and mplayer output

Thanks,

Trevor

X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.9-22.ELsmp i686 [ELF]
Current Operating System: Linux mythtv.trevorkramer.com
2.6.13-1.1526_FC4 #1 Wed Sep 28 19:15:03 EDT 2005 i686
Build Date: 21 September 2005
Build Host: hs20-bc1-6.build.redhat.com
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.6.13-1.1526_FC4
(bhcompile [at] tweety) (gcc version 4.0.1 20050727 (Red
Hat 4.0.1-5)) #1 Wed Sep 28 19:15:03 EDT 2005 F
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 19 12:42:02 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "NTSC Monitor"
(**) | |-->Device "Hauppauge PVR 350 iTVC15 Framebuffer"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "unix/:7100"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "BlankTime" "0"
(**) Option "StandbyTime" "0"
(**) Option "SuspendTime" "0"
(**) Option "OffTime" "0"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3123 card 1106,aa01 rev 00 class
06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b091 card 0000,0000 rev 00 class
06,04,00 hdr 01
(II) PCI: 00:0d:0: chip 1106,3044 card 1106,3044 rev 80 class 0c,
00,10 hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1106,3038 rev 80 class 0c,
03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1106,3038 rev 80 class 0c,
03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1106,3038 rev 80 class 0c,
03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3104 card 1106,3104 rev 82 class 0c,
03,20 hdr 00
(II) PCI: 00:11:0: chip 1106,3177 card 1106,aa01 rev 00 class
06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1106,aa01 rev 06 class
01,01,8a hdr 00
(II) PCI: 00:11:5: chip 1106,3059 card 1106,aa01 rev 50 class
04,01,00 hdr 00
(II) PCI: 00:12:0: chip 1106,3065 card 1106,0102 rev 74 class
02,00,00 hdr 00
(II) PCI: 00:14:0: chip 4444,0803 card 0070,4000 rev 01 class
04,00,00 hdr 00
(II) PCI: 01:00:0: chip 1106,3122 card 1106,3122 rev 03 class
03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe0000000 - 0xe1ffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN
is set)
(--) PCI: (0:20:0) unknown vendor (0x4444) unknown chipset (0x0803)
rev 1, Mem @ 0xdc000000/26
(--) PCI:*(1:0:0) unknown vendor (0x1106) unknown chipset (0x3122)
rev 3, Mem @ 0xd8000000/26, 0xe0000000/24
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xd7ffffff
to 0xcfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xe2001000 - 0xe20010ff (0x100) MX[B]
[1] -1 0 0xe2000000 - 0xe20000ff (0x100) MX[B]
[2] -1 0 0xe2002000 - 0xe20027ff (0x800) MX[B]
[3] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[4] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[B](B)
[5] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
[6] -1 0 0xdc000000 - 0xdfffffff (0x4000000) MX[B](B)
[7] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[8] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[9] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
[10] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
[11] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[12] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[13] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe2001000 - 0xe20010ff (0x100) MX[B]
[1] -1 0 0xe2000000 - 0xe20000ff (0x100) MX[B]
[2] -1 0 0xe2002000 - 0xe20027ff (0x800) MX[B]
[3] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[4] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[B](B)
[5] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
[6] -1 0 0xdc000000 - 0xdfffffff (0x4000000) MX[B](B)
[7] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[8] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[9] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
[10] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
[11] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[12] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[13] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe2001000 - 0xe20010ff (0x100) MX[B]
[6] -1 0 0xe2000000 - 0xe20000ff (0x100) MX[B]
[7] -1 0 0xe2002000 - 0xe20027ff (0x800) MX[B]
[8] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[9] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[B](B)
[10] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
[11] -1 0 0xdc000000 - 0xdfffffff (0x4000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[15] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[16] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
[17] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
[18] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[19] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[20] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "v4l"
(II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
(II) Module v4l: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.0.1
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "xtrap"
(II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.a
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DEC-XTRAP
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.8.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "ivtvdev"
(II) Loading /usr/X11R6/lib/modules/drivers/ivtvdev_drv.o
(II) Module ivtv: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 0.10.6
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "keyboard"
(II) Loading /usr/X11R6/lib/modules/input/keyboard_drv.o
(II) Module keyboard: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) v4l driver for Video4Linux
(II) IVTVDEV_TST: driver for framebuffer: PVR-350
(II) Primary Device is: PCI 01:00:0
(--) Chipset PVR-350 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe2001000 - 0xe20010ff (0x100) MX[B]
[6] -1 0 0xe2000000 - 0xe20000ff (0x100) MX[B]
[7] -1 0 0xe2002000 - 0xe20027ff (0x800) MX[B]
[8] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[9] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[B](B)
[10] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
[11] -1 0 0xdc000000 - 0xdfffffff (0x4000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[15] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[16] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
[17] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
[18] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[19] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[20] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
(II) IVTVDEV_TST(0)using /dev/fb1
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe2001000 - 0xe20010ff (0x100) MX[B]
[6] -1 0 0xe2000000 - 0xe20000ff (0x100) MX[B]
[7] -1 0 0xe2002000 - 0xe20027ff (0x800) MX[B]
[8] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[9] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[B](B)
[10] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
[11] -1 0 0xdc000000 - 0xdfffffff (0x4000000) MX[B](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[18] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[19] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
[20] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
[21] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[22] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[23] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
[24] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[25] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(EE) IVTVDEV_TST(0)Framebuffer id from dev /dev/fb1is 1
(EE) IVTVDEV_TST(0)open /dev/video48 returned 6
(EE) IVTVDEV_TST(0)get_fb returned 0 fbid 1
(**) IVTVDEV_TST(0)Depth 24, (**) framebuffer bpp 32
(==) IVTVDEV_TST(0)RGB weight 888
(==) IVTVDEV_TST(0)Default visual is TrueColor
(==) IVTVDEV_TST(0)Using gamma correction (1.0, 1.0, 1.0)
(II) IVTVDEV_TST(0)Hardware: iTVC15 TV out (vidmem: 2025k)
(**) IVTVDEV_TST(0)Option "ivtv" "/dev/fb1"
(II) IVTVDEV_TST(0)Checking Modes against framebuffer device...
(II) IVTVDEV_TST(0) mode "720x480" ok
(II) IVTVDEV_TST(0)Checking Modes against monitor...
(--) IVTVDEV_TST(0)Virtual size is 720x480 (pitch 720)
(**) IVTVDEV_TST(0) Mode "720x480": 34.6 MHz (scaled from 0.0 MHz),
37.2 kHz, 73.9 Hz
(II) IVTVDEV_TST(0)Modeline "720x480" 34.56 720 752 840 928 480
484 488 504 -hsync -vsync
(==) IVTVDEV_TST(0)DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(**) IVTVDEV_TST(0)Using "Shadow Framebuffer"
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/X11R6/lib/modules/libshadow.a
(II) Module shadow: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xdc000000 - 0xdfffffff (0x4000000) MX[B]
[1] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0xe2001000 - 0xe20010ff (0x100) MX[B]
[7] -1 0 0xe2000000 - 0xe20000ff (0x100) MX[B]
[8] -1 0 0xe2002000 - 0xe20027ff (0x800) MX[B]
[9] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[10] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[B](B)
[11] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
[12] -1 0 0xdc000000 - 0xdfffffff (0x4000000) MX[B](B)
[13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[19] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[20] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
[21] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
[22] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[23] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[24] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
[25] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[26] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
bitsPerPixel=32, depth=24, defaultVisual=TrueColor
mask: ff0000,ff00,ff, offset: 16,8,0
(==) IVTVDEV_TST(0)Backing store disabled
(**) Option "dpms"
(**) IVTVDEV_TST(0)DPMS enabled
Init Video
(II) IVTVDEV_TST(0)Enabling Xv support for PVR350
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "IMPS/2"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "no"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 5
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Keyboard0: XkbRules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) Mouse0: ps2EnableDataReporting: succeeded



******************** mplayer

[mythtv [at] mytht recordings-old]$ mplayer -fs -vo xv -framedrop bob.mpg
MPlayer 1.0pre7try2-3.2.3 (C) 2000-2005 MPlayer Team
CPU: IDT/Centaur/VIA C3 Samuel 2 (WinChip C5B core)/C3 Ezra (Family:
6, Stepping: 3)
Detected cache-line size is 32 bytes
CPUflags: MMX: 1 MMX2: 0 3DNow: 1 3DNow2: 0 SSE: 0 SSE2: 0


Linux RTC init error in ioctl (rtc_irqp_set 1024): Permission denied
Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your
system startup scripts.
Opening joystick device /dev/input/js0
Can't open joystick device /dev/input/js0 : No such file or directory
Can't init input joystick
Setting up LIRC support...
Playing bob.mpg.
MPEG-PS file format detected.
VIDEO: MPEG2 720x480 (aspect 2) 29.970 fps 7000.0 kbps (875.0
kbyte/s)
========================================================================
==
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 48000 Hz, 2 ch, s16le, 384.0 kbit/25.00% (ratio: 48000->192000)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
========================================================================
==
vo: X11 running at 720x480 with depth 24 and 32 bpp (":0" => local
display)
========================================================================
==
Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
VDec: vo config request - 720 x 480 (preferred csp: Mpeg PES)
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
The selected video_out device is incompatible with this codec.
VDecoder init failed :(
Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-
v0.4.0b
Selected video codec: [mpeg12] vfm:libmpeg2 (MPEG-1 or 2 (libmpeg2))
========================================================================
==
Checking audio filter chain for 48000Hz/2ch/s16le -> 48000Hz/2ch/
s16le...
AF_pre: 48000Hz/2ch/s16le
alsa-init: 1 soundcard found, using: default
alsa: 48000 Hz/2 channels/4 bpf/65536 bytes buffer/Signed 16 bit
Little Endian
AO: [alsa] 48000Hz 2ch s16le (2 bps)
Building audio filter chain for 48000Hz/2ch/s16le -> 48000Hz/2ch/
s16le...
Starting playback...
VDec: vo config request - 720 x 480 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
VO: [xv] 720x480 => 720x540 Planar YV12 [fs]
alsa-space: xrun of at least 151.673 msecs. resetting stream?% 0 0
A: 31.7 V: 31.7 A-V: 0.009 ct: 0.169 942/942 56% 30% 6.0% 231 0



On Oct 20, 2005, at 2:57 PM, Ant Daniel wrote:

>
>
> On 10/20/05, Trevor Kramer <tkramer [at] hampshire> wrote: So even
> though xv does work for mplayer it does use 100% of the cpu
> while using the PVR-350 output in mythtv only uses 10%. Does that
> sound right? Does xv not use the hardware decoder?
>
> Trevor
>
> On Oct 15, 2005, at 1:06 AM, Adam Forsyth wrote:
>
> > On 10/15/05, Paul Koster <ivtv [at] kosteronline> wrote:
> >
> >> Trevor Kramer wrote:
> >>
> >>> Hello,
> >>>
> >>> I am trying to use the new Xv support
> >>> (ivtv_xdriver-0.10.6-3.rhfc4.at)
> >>> to drive my PVR-350. I am running VIA EPIA ME6000 (600Mhz)
> >>> board. I can
> >>> get the Xv stuff to work fine in mplayer (mplayer -vo xv
> >>> test.mpeg2) but
> >>> when I change the myth setting to not use the PVR-350 output I get
> >>> constant "prebuffering pause" making it unwatchable. Has anyone
> >>> else
> >>> run into this? Is there a setting somewhere I missed? I also
> >>> unchecked
> >>> the XvMC option since myth wouldn't show anything when that was
> >>> selected. Thanks,
> >>>
> >
> > I'd say email mythtv-users as this is a mythtv problem, since XV is
> > working for other programs. Are you sure XV is working for mplayer?
> > look closely at it's output and make sure it isn't falling back to
> > x11/xshm
> >
> >
> >> You unchecked 'Use PVR350 output), but did you check the related
> >> setting
> >> 'Use XV'? I've not verified the exact names but both options are
> >> in the
> >> same set of configuration screens in Myth.
> >>
> >
> > There is no use xv option in mythtv. It's the default (no optinos
> > checked = xv). You're thinking of the XvMC option.
> >
> > _______________________________________________
> > ivtv-users mailing list
> > ivtv-users [at] ivtvdriver
> > http://ivtvdriver.org/mailman/listinfo/ivtv-users
> >
>
>
> _______________________________________________
> ivtv-users mailing list
> ivtv-users [at] ivtvdriver
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
>
> 100% for xv playback doesn't sound right. It more likely that
> mplayer is not using xv. This might indicate a problem with the
> setuo of xv.
> What version of ivtv are you using.
> Can you please post you X.org.log output, for Fedora this is in
> the /var/log directory.
>
> Ant.
> _______________________________________________
> ivtv-users mailing list
> ivtv-users [at] ivtvdriver
> http://ivtvdriver.org/mailman/listinfo/ivtv-users

ivtv users RSS feed   Index | Next | Previous | View Threaded
 
 


Interested in having your list archived? Contact Gossamer Threads
 
  Web Applications & Managed Hosting Powered by Gossamer Threads Inc.