amcintosh at atreus-systems
Oct 10, 2005, 4:24 AM
Post #4 of 7
(2087 views)
Permalink
|
>It's a very old version. I recommend updating to ivtv-0.3.8 or wait until
>Sunday or Monday when the new stable version 0.4.0 will be released (if all
>goes well). You should also check if you have the latest firmware versions.
>See www.ivtvdriver.org for more details.
>
>
>
I have upgraded, version info below. Now the following appears about 4
entries/sec in syslog, can I safely ignore this?
ivtv warning: ENC Stream 0 OVERFLOW #3635: Stealing a Buffer, 512
currently allocated
Also, can ignore :
ivtv warning: Encoder Firmware can be buggy, use version 0x02040011!!!!
cat /dev/video0 > out.mpg works.
Also is there a way to define the permisions that /dev/video* will be
created?
Thanks!
ACPI: PCI interrupt for device 0000:00:09.0 disabled
ivtv: Removed WinTV PVR 250, card #0
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.8 (tagged release) loading
ivtv: Linux version: 2.6.13-1.1526_FC4 686 REGPARM 4KSTACKS gcc-4.0
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 250 card (iTVC16 based)
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 5 (level, low)
-> IRQ 5
tveeprom: Hauppauge: model = 32062, rev = B185, serial# = 2868847
tveeprom: tuner = TCL 2002N 6A (idx = 85, type = 50)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio processor = MSP3445 (type = c)
tveeprom: decoder processor = SAA7115 (type = 13)
ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61]
ivtv: i2c attach to card #0 ok [client=saa7115[50], addr=21]
msp34xx: ivtv version
msp34xx: init: chip=MSP3445G-B8, has NICAM support, simple (D) mode,
simpler (G) no-thread mode
msp34xx: $Id$ compiled on: Sep 30 2005 09:42:15
ivtv: i2c attach to card #0 ok [client=MSP3445G-B8, addr=40]
ivtv: loading /lib/modules/ivtv-fw-enc.bin
ivtv: Encoder revision: 0x02050032
ivtv warning: Encoder Firmware can be buggy, use version 0x02040011!!!!
ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
total)
tuner: type set to 50 (TCL 2002N) by ivtv i2c driver #0
ivtv: Initialized WinTV PVR 250, card #0
ivtv: ==================== END INIT IVTV ====================
|
