Mailing List Archive by Gossamer Threads http://www.gossamer-threads.com/lists/ivtv/users/ en-us (c) Gossamer Threads Inc. All rights reserved. 24 Nov 2009 10:09:50 -0800 120 75 23 http://www.gossamer-threads.com/lists/ivtv/users/ http://www.gossamer-threads.com/images/lists/rss_logo.jpg Hi, firstly sorry my english. :) My pv250's tuner card is no voice of the default audio routing settings,only if other value to give him. (ivtv-ctl -v 24 Nov 2009 03:49:33 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40513 > Date: Mon, 23 Nov 2009 18:53:45 -0800 > From: "Tony Ross" <tross.technical@starband.net> > After more experimentation, I find that the 24 Nov 2009 00:31:58 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40512 Andy Walls wrote: > How many pixels wide is the vertical band? There should be 720 pixels > total across the whole line. After more experimentation 23 Nov 2009 18:53:45 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40511 Devin Heitmueller wrote: ... >> A thick black vertical band is on the entire left side of the video >> image, and a thin band of distortion exists al 23 Nov 2009 18:27:54 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40510 I did this, as suggested in a previous thread: v4l2-ctl --list-inputs v4l2-ctl --set-input 2 Composite 1 Press play on the VCR cat /dev/ 23 Nov 2009 14:07:01 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40508 Thanks for the comments, I believe I have found the cause of my issues. Due to a very silly typo (that took me two weeks to spot) it could happen 22 Nov 2009 06:42:46 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40500 On Fri, 2009-11-20 at 11:22 -0800, Tony Ross wrote: > The PVR-500 card that I'm using apparently introduces two features that > don't exist in the ori 20 Nov 2009 14:17:48 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40495 On Fri, Nov 20, 2009 at 2:22 PM, Tony Ross <tross.technical@starband.net> wrote: > The PVR-500 card that I'm using apparently introduces two features 20 Nov 2009 11:25:56 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40494 The PVR-500 card that I'm using apparently introduces two features that don't exist in the original recordings, as evidenced by viewing on a regular T 20 Nov 2009 11:22:11 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40493 Levente Novák wrote: >> What I'd like is to be able to do is watch the video stream and >> start/stop recording to disk whenever desired. That way I 20 Nov 2009 10:36:37 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40492 You must have better things to do. I'm going to take a break. Today is manual labor day. Thanks, Peter On Fri, Nov 20, 2009 at 3:46 AM, Andy Walls <a 20 Nov 2009 08:12:17 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40491 On Thu, 2009-11-19 at 16:36 -0800, Peter Hollenbeck wrote: > With the same card and cables I can capture and play video on Windows > XP using Hauppaug 20 Nov 2009 03:46:34 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40490 On Thu, 2009-11-19 at 14:33 -0800, Tony Ross wrote: > Ben Bronk quoted and wrote: > > >> In order to assist with the start/stop of the recording and 20 Nov 2009 03:44:03 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40489 2009. 11. 19, csütörtök keltezéssel 14.33-kor Tony Ross ezt írta: > Ben Bronk quoted and wrote: > > >> If anyone has a better solution for watc 19 Nov 2009 23:25:20 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40488 With the same card and cables I can capture and play video on Windows XP using Hauppauge WinTV v6 software. On Linux I can't capture and/or can't play 19 Nov 2009 16:36:31 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40487 Ben Bronk quoted and wrote: >> In order to assist with the start/stop of the recording and >> positioning of the tape, I need to watch the video stre 19 Nov 2009 14:33:41 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40486 Am Thu, 19 Nov 2009 13:08:52 -0800 schrieb Peter Hollenbeck <pwhbeck@gmail.com>: Are you sure the source attached to composite1 is providing some kin 19 Nov 2009 13:22:44 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40485 This does the same as without the options. Plays a black video clip. VLC plays it the same. Anything else you think I should try? Thanks, Peter mplay 19 Nov 2009 13:08:52 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40484 Am Thu, 19 Nov 2009 12:02:14 -0800 schrieb Peter Hollenbeck <pwhbeck@gmail.com>: This looks more like a mplayer problem. Try "mplayer -vo x11 foo.mp 19 Nov 2009 12:26:25 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40483 Thanks to this thread for showing me how to capture: [ivtv-users] S-video; how to get audio?I am on OpenSUSE 11.1, kernel 2.6.27 Using Hauppauge WinTV 19 Nov 2009 12:02:14 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40482 On Wednesday 18 November 2009 02:42:30 pm Tony Ross wrote: > On Mon, 2009-11-16 at 15:07 -0800, Peter Hollenbeck wrote: > > If the PVR-500MCE is like 18 Nov 2009 18:10:17 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40477 On Mon, 2009-11-16 at 15:07 -0800, Peter Hollenbeck wrote: > If the PVR-500MCE is like the PVR-250 it has a 1/8" audio input jack. The PVR-500 than 18 Nov 2009 11:42:30 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40476 On Mon, 2009-11-16 at 19:11 -0500, Andy Walls wrote: > On Mon, 2009-11-16 at 14:46 -0800, Tony Ross wrote: > > Hello, we'd like to use the S-video in 18 Nov 2009 11:20:02 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40475 On Mon, 2009-11-16 at 19:11 -0500, Andy Walls wrote: > On Mon, 2009-11-16 at 14:46 -0800, Tony Ross wrote: > > Hello, we'd like to use the S-video inp 16 Nov 2009 16:17:52 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40474 On Mon, 2009-11-16 at 14:46 -0800, Tony Ross wrote: > Hello, we'd like to use the S-video input to get the best image quality > from the VHS player in 16 Nov 2009 16:11:39 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40473 If the PVR-500MCE is like the PVR-250 it has a 1/8" audio input jack. Use an adapter to convert the player's RCA audio output to 1/8" and plug it into 16 Nov 2009 15:07:46 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40472 Once you set the input to svideo, just use /dev/videoX (where X is your device number, starts with 0) to get the combined mpeg stream. Tom ---- 16 Nov 2009 14:51:09 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40471 Hello, we'd like to use the S-video input to get the best image quality from the VHS player into the Hauppauge PVR-500MCE. Apparently we need the RCA 16 Nov 2009 14:46:22 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40470 I am using ML 2010. Kernel desktop 2.6.31.5. Ivtv does not work in dmesg I get the following error: vtv0: Registered device video0 for encoder MPG ( 15 Nov 2009 17:40:50 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40480 Hi all, Since the older 1.1.0 driver no longer compiled with the latest Xorg, Ian and Nicolas provided me with a patch that fixed this. So I made a 15 Nov 2009 02:25:48 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40466 On Thu, Nov 12, 2009 at 11:27 AM, Hans Verkuil <hverkuil@xs4all.nl> wrote: > Hi John, > >> Hi all, >> >> I will be on vacation to Cozumel Mexico from 12 Nov 2009 08:57:59 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40459 Hi John, > Hi all, > > I will be on vacation to Cozumel Mexico from this Friday evening till > some the 23rd of November. I may check in 1 or 2 even 12 Nov 2009 08:27:51 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40458 Hi all, I will be on vacation to Cozumel Mexico from this Friday evening till some the 23rd of November. I may check in 1 or 2 evenings but I will b 12 Nov 2009 07:28:52 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40455 On Wed, 2009-11-11 at 12:50 +0100, Johan wrote: > ivtv-driver : 1.4.1 > > I've written a threaded recording server that makes use of one or more TV- 11 Nov 2009 06:58:29 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40444 Tejun Heo wrote: > Hello, Marty. > > Marty wrote: >> I got two hard hangs in 2.6.32-rc5 and rc6 in an Asrock A780GXE/128M >> with AMD 780G+SB700 chip 11 Nov 2009 05:04:49 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40443 ivtv-driver : 1.4.1 I've written a threaded recording server that makes use of one or more TV- capture cards (e.g. Hauppage 150, 350 etc) to do sched 11 Nov 2009 03:50:48 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40442 These parameters are left over from the initial installation root@mythtv:~# cat /etc/mythtv/modules/ivtv alias char-major-81 videodev alias char-majo 10 Nov 2009 07:13:01 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40439 Somehow I got the wrong lsmod. Here is the current output with X running. root@mythtv:~# lsmod 09 Nov 2009 10:27:37 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40436 On Mon, Nov 9, 2009 at 1:59 AM, Tom Epperly <tepperly@gmail.com> wrote: > Package: xserver-xorg-video-ivtv > > Version: 1.0.1-1 > Severity: normal > > 09 Nov 2009 10:04:13 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40435 On Mon, Nov 9, 2009 at 1:59 AM, Tom Epperly <tepperly@gmail.com> wrote: > Package: xserver-xorg-video-ivtv > > Version: 1.0.1-1 > Severity: normal > > 09 Nov 2009 09:14:12 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40434 Hello, Marty. Marty wrote: > I got two hard hangs in 2.6.32-rc5 and rc6 in an Asrock A780GXE/128M > with AMD 780G+SB700 chipsets, resulting in no res 09 Nov 2009 01:34:02 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40433 Package: xserver-xorg-video-ivtv Version: 1.0.1-1 Severity: normal I upgraded a Knoppmyth R5 system using apt-get update ; apt-get dist-upgrade to D 08 Nov 2009 22:59:35 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40432 I got two hard hangs in 2.6.32-rc5 and rc6 in an Asrock A780GXE/128M with AMD 780G+SB700 chipsets, resulting in no response to magic alt-sysreq. The f 07 Nov 2009 09:25:55 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40429 On Sat, Nov 7, 2009 at 5:00 PM, Andy Walls <awalls@radix.net> wrote: > On Sat, 2009-11-07 at 08:53 -0500, Andy Walls wrote: >> On Sat, 2009-11-07 at 1 07 Nov 2009 07:04:33 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40428 On Sat, 2009-11-07 at 08:53 -0500, Andy Walls wrote: > On Sat, 2009-11-07 at 14:30 +0300, Rajesh Padalia wrote: > You are an owner of a MyTellyHD, an 07 Nov 2009 06:00:35 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40426 On Sat, 2009-11-07 at 14:30 +0300, Rajesh Padalia wrote: > Hi List, > I am trying to build Linux Media Center with Tuner card removed from > MyTellyHD 07 Nov 2009 05:52:57 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40425 Hi List, I am trying to build Linux Media Center with Tuner card removed from MyTellyHD (Interact-TV). MyTellyHD used to work with this tuner card. Ho 07 Nov 2009 03:30:13 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40424 I am using ivtv 1.4.1 with mythtv 0.22 running on Ubuntu 9.10. I have an issue where the mythtv starts too soon before all of my PVR-150 tuners (I am 06 Nov 2009 14:10:26 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40423 Andy, Again, thank you very much for your advise and input! I really appreciate hearing from somebody who is knowledgeable on this. Thank you ag 05 Nov 2009 18:36:43 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40422 I've been using a PVR-250 on an intel DP45SG motherboard with no problems for quite some time now. Maybe not the latest driver/kernel (CentOS 5.4), b 05 Nov 2009 17:41:01 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40421 On Thu, 2009-11-05 at 09:18 -0600, Steve Gunther wrote: > I am modifying my ivtv settings to increase buffer size. I am using > the following string; 05 Nov 2009 15:09:09 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40420 I am modifying my ivtv settings to increase buffer size. I am using the following string; options ivtv enc_yuv_buffers=8 enc_mpg_buffers=48 enc_vbi_ 05 Nov 2009 07:18:54 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40419 On Wed, 2009-11-04 at 19:52 -0800, G.M. Humfrey wrote: > Andy, > Thank you very much for your answers ; that does make things quite a > bit clearer. 05 Nov 2009 03:41:01 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40418 Andy, Thank you very much for your answers ; that does make things quite a bit clearer. Do you know please if the ivtv sections that the cx18 set 04 Nov 2009 19:52:05 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40417 On Wed, 2009-11-04 at 16:06 -0800, G.M. Humfrey wrote: > I currently run MythTV with a PVR-350 on a Fedora Core 4 installation > running on a 1ghz sys 04 Nov 2009 17:00:57 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40416 I currently run MythTV with a PVR-350 on a Fedora Core 4 installation running on a 1ghz system, with a front-end configured as well. It has been pret 04 Nov 2009 16:34:49 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40415 I currently run MythTV with a PVR-350 on a Fedora Core 4 installation running on a 1ghz system, with a front-end configured as well. It has been pret 04 Nov 2009 16:06:15 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40414 I'm having trouble separating two audio languages. I am trying to get English audio from CNN Japan (NTSC-M-J; japan-cable; 62; 457.25MHz). The setti 03 Nov 2009 17:56:22 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40412 Hi guys, As ARCH Linux is always bleeding edge things tend to break sometimes. :-) I "fixed" the 'xf86-video-ivtvfb' package in the AUR: http://au 03 Nov 2009 13:07:54 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40411 On Sat, 2009-10-31 at 18:14 -0400, Jacob Michael van Wessem wrote: > (removing long previous text, let me know if you'd like me to keep > including th 03 Nov 2009 03:25:49 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40409 On Mon, 2009-11-02 at 03:37 -0500, Raymond Wagner wrote: > I've been unable to capture anything but static from either of my > PVR-150s on kernels 2. 02 Nov 2009 03:44:36 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40407 I've been unable to capture anything but static from either of my PVR-150s on kernels 2.6.30 and 2.6.31. Dmesg reports no errors to indicate what t 02 Nov 2009 00:37:31 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40406 On Sun, 2009-11-01 at 00:29 -0700, Tony Ross wrote: > Andy Walls wrote: > > [Re: Hauppauge HVR-1600]: > > > Well, no. It's very stable for the comm 01 Nov 2009 04:29:06 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40403 ----- Original Message ----- From: "Tony Ross" <tross.technical@starband.net> To: "User discussion about IVTV" <ivtv-users@ivtvdriver.org> Sent: Sund 01 Nov 2009 03:22:25 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40402 Andy Walls wrote: [Re: Hauppauge HVR-1600]: > Well, no. It's very stable for the common use cases: capturing and > compressing analog video and pas 31 Oct 2009 23:29:59 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40399 faginbagin wrote: ... > The HDHomeRun won't use your internet bandwidth, but it does require > that you have a local area network in your home. IOW, y 31 Oct 2009 23:17:04 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40398 On Sat, 2009-10-31 at 18:14 -0400, Jacob Michael van Wessem wrote: > (removing long previous text, let me know if you'd like me to keep > including th 31 Oct 2009 18:18:03 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40396 Hi Tony, >> You can try the hvr-1600 pci card then again I have had real good >> results from the HDHomerun network receiver. ------Original > > Tha 31 Oct 2009 17:56:43 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40395 On Sat, 2009-10-31 at 14:20 -0700, Tony Ross wrote: > Andy Walls wrote: > > >> I currently have an Hauppauge PVR-500MCE which is working well for > > 31 Oct 2009 17:50:17 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40394 (removing long previous text, let me know if you'd like me to keep including this) Is there anything else I can try to get the driver to work? How 31 Oct 2009 15:14:07 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40391 harlock@pclynk.net wrote: > You can try the hvr-1600 pci card then again I have had real good > results from the HDHomerun network receiver. ------Or 31 Oct 2009 14:25:41 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40390 Andy Walls wrote: >> I currently have an Hauppauge PVR-500MCE which is working well for >> my needs, but wish to capture digital ATSC transmissions i 31 Oct 2009 14:20:15 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40389 On Sat, 2009-10-31 at 12:47 -0700, Tony Ross wrote: > Greetings, > > I currently have an Hauppauge PVR-500MCE which is working well for my needs, > b 31 Oct 2009 13:24:08 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40388 You can try the hvr-1600 pci card then again I have had real good results from the HDHomerun network receiver. ------Original Message------ From: To 31 Oct 2009 12:56:52 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40387 Greetings, I currently have an Hauppauge PVR-500MCE which is working well for my needs, but wish to capture digital ATSC transmissions in my area. I 31 Oct 2009 12:47:06 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40386 Hi Andy, On Thu, Oct 29, 2009 at 7:45 PM, Andy Walls <awalls@radix.net> wrote: > Please test for Devin if you can.  I've reviewed the changes and the 30 Oct 2009 12:49:05 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40383 wow, much better. my old snr was about 0x128, now it's 0x14c and i haven't had any BER errors all night. thanks, daniel Devin Heitmueller <dheitmuel 29 Oct 2009 20:06:02 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40381 On Thu, 2009-10-29 at 10:28 -0400, Devin Heitmueller wrote: > Hello all, > > If you are an HVR-1600 user who has noticed the ClearQAM tuning > perfor 29 Oct 2009 16:45:35 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40380 Hello all, If you are an HVR-1600 user who has noticed the ClearQAM tuning performance under Linux was worse than under Windows, the following should 29 Oct 2009 07:28:21 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40378 On Sun, 2009-10-25 at 19:39 -0400, Andy Walls wrote: > On Sun, 2009-10-25 at 10:38 -0400, Jacob Michael van Wessem wrote: > > Hello, > > > > I'm havi 28 Oct 2009 16:37:56 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40377 Thank you very much. I'm trying your suggestions and will report back on the list when I've been able to explore PCI options and a Windows install. 25 Oct 2009 19:45:09 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40376 On Sun, 2009-10-25 at 10:38 -0400, Jacob Michael van Wessem wrote: > Hello, > > I'm having some problems with the Hauppage WinTV-HVR-1600 that I > re 25 Oct 2009 16:39:16 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40375 Hello, I'm having some problems with the Hauppage WinTV-HVR-1600 that I recently bought. I'm running Jaunty on a system with an ASUS A7V333 motherboa 25 Oct 2009 07:38:11 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40374 On Thu, 2009-10-22 at 12:03 -0400, Sergio M. Ammirata, Ph.D. wrote: > Hello, > > I have custom a linux build with kernel 2.6.32-rc4, uclibc 0.9.30.1 23 Oct 2009 03:37:51 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40373 Hello, I have custom a linux build with kernel 2.6.32-rc4, uclibc 0.9.30.1 and a PVR-1600 card. I am using ivtv tools 1.4.0 The driver loads and the 22 Oct 2009 09:03:08 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40372 Karl Newman wrote: > I have a PVR-500 (I think it has the Samsung tuners) that I've been > using successfully since about kernel 2.6.14. I don't have 15 Oct 2009 00:08:04 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40370 On Wed, Oct 14, 2009 at 12:49 PM, Tony Ross <tross.technical@starband.net>wrote: > I find that when I view the "cat /dev/video0 > test.mpg" file that 14 Oct 2009 13:22:23 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40369 I find that when I view the "cat /dev/video0 > test.mpg" file that is created using a Hauppauge PVR-500 with the Samsung chips using ivtv-0.10.6 with 14 Oct 2009 12:49:42 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40368 All, I'll be somewhat busy on non-linux things for the next 2-3 weeks as I support my wife in getting her corporation off the ground. (I'm already l 13 Oct 2009 16:05:58 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40367 Hi Andy, Andy Walls wrote: > On Sat, 2009-10-10 at 17:25 -0400, faginbagin wrote: >> Hi Alexandra, > > >> FWIW, closed captions are important to me 11 Oct 2009 16:16:31 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40364 Hi Hans, On Sunday 11 October 2009 18:02:42 Hans Verkuil wrote: > Hi all, > > You may have noticed very little activity from me lately: this is due 11 Oct 2009 15:30:56 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40365 Hi all, You may have noticed very little activity from me lately: this is due to a lot of traveling and a very busy work schedule. This will continu 11 Oct 2009 09:02:42 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40362 On Sat, 2009-10-10 at 17:25 -0400, faginbagin wrote: > Hi Alexandra, > FWIW, closed captions are important to me, too. In my case, I wanted > to be 11 Oct 2009 04:57:36 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40360 Hi Alexandra, amaranth13 wrote: > Hi, > > I just had a question about how to use the zvbi command. > > I have a system with one Hauppauge PVR 150 c 10 Oct 2009 14:25:22 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40357 Hello, and thanks to the authors for their selfless contributions to the ivtv project. I have compiled and installed ivtv-0.10.6 for the Linux 2.6.18 09 Oct 2009 19:35:11 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40356 On Fri, 2009-10-09 at 10:55 -0700, amaranth13 wrote: > Hi, > > I just had a question about how to use the zvbi command. > > I have a system with one 09 Oct 2009 14:44:01 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40355 Hi, I just had a question about how to use the zvbi command. I have a system with one Hauppauge PVR 150 card with Mythtv on Ubuntu 8.04 Hardy Heron 09 Oct 2009 10:55:42 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40354 Hi all ! I have some trouble with the PVR-350 S-Video input. Audio/Video Signals comes from an old VideoTape (VHS) I make this : v4l2-ctl --set-inp 04 Oct 2009 08:42:50 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40351 Dan, On Thu, 2009-10-01 at 23:20 -0400, Daniel Flesner wrote: > Andy Walls <awalls@radix.net> writes: . > i turned on more debug info and only got a 02 Oct 2009 17:11:05 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40350 Andy Walls <awalls@radix.net> writes: > Dan, > > On Wed, 2009-09-30 at 22:33 -0400, Daniel Flesner wrote: >> i have an hvr-1600 that i'm trying to ge 01 Oct 2009 20:20:03 -0800 http://www.gossamer-threads.com/lists/ivtv/users/40349