amolspatil at gmail
Dec 25, 2008, 5:03 PM
Post #1 of 1
(844 views)
Permalink
|
Below is the kernel log of my machine (Toshiba Qosmio F20-136)
cx18: Start initialization, version 1.0.0
cx18-0: Initializing card #0
cx18-0: Unknown card: vendor/device: 14f1/5b7a
cx18-0: subsystem vendor/device: 1179/0110
cx18-0: Defaulting to Hauppauge HVR-1600 card
cx18-0: Please mail the vendor/device and subsystem vendor/device IDs
and what kind of
cx18-0: card you have to the ivtv-devel mailinglist (www.ivtvdriver.org)
cx18-0: Prefix your subject line with [UNKNOWN CX18 CARD].
cx18 0000:02:09.0: enabling device (0000 -> 0002)
cx18 0000:02:09.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
cx18-0: cx23418 revision 01010000 (B)
cx18-0: Invalid EEPROM
cx18-0: VBI is not yet supported
cs5345 0-004c: chip found @ 0x98 (cx18 i2c driver #0-0)
cx18-0: Disabled encoder IDX device
cx18-0: Registered device video0 for encoder MPEG (2 MB)
DVB: registering new adapter (cx18)
cx18-0: frontend initialization failed
cx18-0: DVB failed to register
cx18-0: Registered device video32 for encoder YUV (2 MB)
cx18-0: Registered device video24 for encoder PCM audio (1 MB)
cx18-0: Registered device radio0 for encoder radio
cx18-0: Error -12 registering devices
cx18-0: Error -12 on initialization
cx18: probe of 0000:02:09.0 failed with error -12
cx18: End initialization
_______________________________________________
ivtv-devel mailing list
ivtv-devel[at]ivtvdriver.org
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
|
