fboudra at gmail
Oct 14, 2008, 11:07 AM
Post #1 of 1
(1262 views)
Permalink
|
|
[UNKNOWN CX18 CARD] Toshiba Qosmio G30
|
|
Hi,
please find below some inormation on an unknown cx18 card:
- hardware:
Toshiba Qosmio G30 laptop
- kern.log result:
[ 10.313391] cx18: Start initialization, version 1.0.0
[ 10.341362] cx18-0: Initializing card #0
[ 10.341362] cx18-0: Unknown card: vendor/device: 14f1/5b7a
[ 10.341362] cx18-0: subsystem vendor/device: 1179/0110
[ 10.341362] cx18-0: Defaulting to Hauppauge HVR-1600 card
[ 10.341362] cx18-0: Please mail the vendor/device and subsystem vendor/device IDs and what kind of
[ 10.341804] cx18-0: card you have to the ivtv-devel mailinglist (www.ivtvdriver.org)
[ 10.342175] cx18-0: Prefix your subject line with [UNKNOWN CX18 CARD].
[ 10.346407] cx18-0: cx23418 revision 01010000 (B)
[ 10.537555] cx18-0: Invalid EEPROM
[ 10.537555] cx18-0: VBI is not yet supported
[ 58.667376] cs5345 0-004c: chip found @ 0x98 (cx18 i2c driver #0-0)
[ 58.669444] cx18-0: Disabled encoder IDX device
[ 58.669477] cx18-0: Registered device video0 for encoder MPEG (2 MB)
[ 58.669481] DVB: registering new adapter (cx18)
[ 59.054729] cx18-0: frontend initialization failed
[ 59.054729] cx18-0: DVB failed to register
[ 59.054729] cx18-0: Registered device video32 for encoder YUV (2 MB)
[ 59.054729] cx18-0: Registered device video24 for encoder PCM audio (1 MB)
[ 59.054729] cx18-0: Registered device radio0 for encoder radio
[ 59.055532] cx18-0: Error -12 registering devices
[ 59.056352] cx18-0: Error -12 on initialization
[ 59.056576] cx18: probe of 0000:06:09.0 failed with error -12
[ 59.056596] cx18: End initialization
- lspci -vvv result:
06:09.0 Multimedia video controller: Conexant CX23418 Single-Chip MPEG-2 Encoder with Integrated Analog Video/Broadcast Audio Decoder
Subsystem: Toshiba America Info Systems Device 0110
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 50000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: cx18
cheers,
Fathi
ps: please cc me, I'm not subscribed to the list.
_______________________________________________
ivtv-devel mailing list
ivtv-devel [at] ivtvdriver
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
|
