Login | Register For Free | Help
Search for: (Advanced)

Mailing List Archive: ivtv: devel

[ANN] ivtv on hold for the next few weeks

  

 
ivtv devel RSS feed   Index | Next | Previous | View Threaded


hverkuil at xs4all

Apr 10, 2007, 1:56 PM

Post #1 of 24 (5410 views)
Permalink
[ANN] ivtv on hold for the next few weeks
Hi all,

As you may have noticed I haven't done much with ivtv lately and this is
expected to continue for the next few weeks. The main two reasons for
this are that I worked very hard to get it into the kernel and so I
needed some time off, and that for my work I'll be moving to Lysaker,
Norway for what will probably be the next 5-6 months. I'm leaving this
Friday and I expect that it will take a while to settle in. It should
be possible for me to continue my work on ivtv, but it will take some
time to set everything up.

Some people have problems with clock drift and remote keypresses. These
are almost certainly caused by the use of PIO memory copies inside the
ivtv interrupt routine. Two or three weeks ago I made a patch to fix
this, but unfortunately it introduced a new problem: sliced VBI
handling for the cx2584x digitizer broke: half of the VBI data seems to
go missing. Oddly enough it works fine for the saa7115 digitizer.

The patch is available here:

http://www.xs4all.nl/~hverkuil/ivtv-pio.diff

And I'd love it if someone can discover why it no longer works with the
cx2584x.

I do not have time for this, so I hope someone else can take up the
gauntlet.

Regards,

Hans

_______________________________________________
ivtv-devel mailing list
ivtv-devel [at] ivtvdriver
http://ivtvdriver.org/mailman/listinfo/ivtv-devel


nicolas.mailhot at laposte

Apr 10, 2007, 2:07 PM

Post #2 of 24 (5319 views)
Permalink
Re: [ANN] ivtv on hold for the next few weeks [In reply to]
Le mardi 10 avril 2007 à 22:56 +0200, Hans Verkuil a écrit :
> Hi all,
>
> As you may have noticed I haven't done much with ivtv lately and this is
> expected to continue for the next few weeks. The main two reasons for
> this are that I worked very hard to get it into the kernel

And this is appreciated, many thanks Hans!

--
Nicolas Mailhot
Attachments: signature.asc (0.19 KB)


md001 at gmx

Apr 10, 2007, 2:33 PM

Post #3 of 24 (5310 views)
Permalink
Re: [ANN] ivtv on hold for the next few weeks [In reply to]
Good luck Hans!
Any chance that you can fix the decoder stop bug before you move?
http://www.gossamer-threads.com/lists/ivtv/devel/35305
Would be a pity to let it buggy in trunk and v4l-dvb hg for weeks or months.
BTW: http://ivtvdriver.org/viewcvs/ gives a "The requested URL /viewcvs/ was not found on this server"


--
"Feel free" - 10 GB Mailbox, 100 FreeSMS/Monat ...
Jetzt GMX TopMail testen: http://www.gmx.net/de/go/topmail

_______________________________________________
ivtv-devel mailing list
ivtv-devel [at] ivtvdriver
http://ivtvdriver.org/mailman/listinfo/ivtv-devel


hverkuil at xs4all

Apr 10, 2007, 3:02 PM

Post #4 of 24 (5306 views)
Permalink
Re: [ANN] ivtv on hold for the next few weeks [In reply to]
On Tuesday 10 April 2007 23:33, Martin Dauskardt wrote:
> Good luck Hans!
> Any chance that you can fix the decoder stop bug before you move?
> http://www.gossamer-threads.com/lists/ivtv/devel/35305
> Would be a pity to let it buggy in trunk and v4l-dvb hg for weeks or
> months. BTW: http://ivtvdriver.org/viewcvs/ gives a "The requested
> URL /viewcvs/ was not found on this server"

Just fixed it. I couldn't understand what was wrong with it until I
suddenly saw the light :-)

Fixed in the ivtv trunk, and it's queued for the v4l-dvb tree.

Regards,

Hans

_______________________________________________
ivtv-devel mailing list
ivtv-devel [at] ivtvdriver
http://ivtvdriver.org/mailman/listinfo/ivtv-devel


grantmc at gmail

Apr 10, 2007, 3:11 PM

Post #5 of 24 (5311 views)
Permalink
Re: [ANN] ivtv on hold for the next few weeks [In reply to]
On 4/10/07, Martin Dauskardt <md001 [at] gmx> wrote:

> BTW: http://ivtvdriver.org/viewcvs/ gives a "The requested URL /viewcvs/ was not found on this server"

http://ivtvdriver.org/trac/

_______________________________________________
ivtv-devel mailing list
ivtv-devel [at] ivtvdriver
http://ivtvdriver.org/mailman/listinfo/ivtv-devel


derliebegott at gmail

Apr 10, 2007, 3:48 PM

Post #6 of 24 (5318 views)
Permalink
Re: [ANN] ivtv on hold for the next few weeks [In reply to]
Hi,

It looks that this topic is my last chance to get an answer to my
question, which I already asked twice. I hope I will have this time
more luck.

"ivtvctl --reset-ir" gives me this on my PVR150 (0.10.1 with 2.6.20.1):
ioctl VIDIOC_INT_RESET failed: Invalid argument

and I need this command to work, because my IR is never recognized
after reboot. only if I suspend and wake up my computer, IR starts to
work (almost always).

Thanks. I would appreciate any help.

M.



ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.10.1 (tagged release) loading
ivtv: Linux version: 2.6.20.1 SMP mod_unload K8
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt 0000:03:08.0[A] -> Link [APC3] -> GSI 18 (level,
low) -> IRQ 21
ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Encoder revision: 0x02060039
tveeprom 2-0050: Hauppauge model 26134, rev F1B3, serial# 10233063
tveeprom 2-0050: tuner model is TCL M2523_3DB_E (idx 113, type 55)
tveeprom 2-0050: TV standards PAL(B/G) PAL(D/D1/K) (eeprom 0x44)
tveeprom 2-0050: audio processor is CX25842 (idx 36)
tveeprom 2-0050: decoder processor is CX25842 (idx 29)
tveeprom 2-0050: has no radio, has IR receiver, has IR transmitter
ivtv0: Autodetected Hauppauge WinTV PVR-150
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
cx25840 2-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0)
cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: Registered device video0 for encoder MPEG (4 MB)
ivtv0: Registered device video32 for encoder YUV (2 MB)
ivtv0: Registered device vbi0 for encoder VBI (1 MB)
ivtv0: Registered device video24 for encoder PCM audio (1 MB)
tuner 2-0061: type set to 55 (TCL 2002MB)
ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
ivtv: ==================== END INIT IVTV ====================

_______________________________________________
ivtv-devel mailing list
ivtv-devel [at] ivtvdriver
http://ivtvdriver.org/mailman/listinfo/ivtv-devel


hverkuil at xs4all

Apr 10, 2007, 4:03 PM

Post #7 of 24 (5322 views)
Permalink
Re: [ANN] ivtv on hold for the next few weeks [In reply to]
On Wednesday 11 April 2007 00:48, Ma Begaj wrote:
> Hi,
>
> It looks that this topic is my last chance to get an answer to my
> question, which I already asked twice. I hope I will have this time
> more luck.
>
> "ivtvctl --reset-ir" gives me this on my PVR150 (0.10.1 with
> 2.6.20.1): ioctl VIDIOC_INT_RESET failed: Invalid argument
>
> and I need this command to work, because my IR is never recognized
> after reboot. only if I suspend and wake up my computer, IR starts to
> work (almost always).
>
> Thanks. I would appreciate any help.

Fixed in the ivtv 0.10 branch. Weird, I must have missed your question
the first two times, I can't remember reading it.

Regards,

Hans

>
> M.
>
>
>
> ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.10.1 (tagged release) loading
> ivtv: Linux version: 2.6.20.1 SMP mod_unload K8
> ivtv: In case of problems please include the debug info between
> ivtv: the START INIT IVTV and END INIT IVTV lines, along with
> ivtv: any module options, when mailing the ivtv-users mailinglist.
> ivtv0: Autodetected Hauppauge card (cx23416 based)
> ACPI: PCI Interrupt 0000:03:08.0[A] -> Link [APC3] -> GSI 18 (level,
> low) -> IRQ 21
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
> ivtv0: Encoder revision: 0x02060039
> tveeprom 2-0050: Hauppauge model 26134, rev F1B3, serial# 10233063
> tveeprom 2-0050: tuner model is TCL M2523_3DB_E (idx 113, type 55)
> tveeprom 2-0050: TV standards PAL(B/G) PAL(D/D1/K) (eeprom 0x44)
> tveeprom 2-0050: audio processor is CX25842 (idx 36)
> tveeprom 2-0050: decoder processor is CX25842 (idx 29)
> tveeprom 2-0050: has no radio, has IR receiver, has IR transmitter
> ivtv0: Autodetected Hauppauge WinTV PVR-150
> tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> cx25840 2-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0)
> cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
> wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
> ivtv0: Registered device video0 for encoder MPEG (4 MB)
> ivtv0: Registered device video32 for encoder YUV (2 MB)
> ivtv0: Registered device vbi0 for encoder VBI (1 MB)
> ivtv0: Registered device video24 for encoder PCM audio (1 MB)
> tuner 2-0061: type set to 55 (TCL 2002MB)
> ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
> ivtv: ==================== END INIT IVTV ====================
>
> _______________________________________________
> ivtv-devel mailing list
> ivtv-devel [at] ivtvdriver
> http://ivtvdriver.org/mailman/listinfo/ivtv-devel

_______________________________________________
ivtv-devel mailing list
ivtv-devel [at] ivtvdriver
http://ivtvdriver.org/mailman/listinfo/ivtv-devel


derliebegott at gmail

Apr 10, 2007, 4:11 PM

Post #8 of 24 (5307 views)
Permalink
Re: [ANN] ivtv on hold for the next few weeks [In reply to]
> Fixed in the ivtv 0.10 branch. Weird, I must have missed your question
> the first two times, I can't remember reading it.

I am already using 0.10.1 with kernel 2.6.20.1.

M.

_______________________________________________
ivtv-devel mailing list
ivtv-devel [at] ivtvdriver
http://ivtvdriver.org/mailman/listinfo/ivtv-devel


g8ecj at gilks

Apr 10, 2007, 4:46 PM

Post #9 of 24 (5298 views)
Permalink
Re: [ANN] ivtv on hold for the next few weeks [In reply to]
>> Fixed in the ivtv 0.10 branch. Weird, I must have missed your question
>> the first two times, I can't remember reading it.
>
> I am already using 0.10.1 with kernel 2.6.20.1.

Are you sure you are using the 0.10.1 user space apps?

--
Robin Gilks



_______________________________________________
ivtv-devel mailing list
ivtv-devel [at] ivtvdriver
http://ivtvdriver.org/mailman/listinfo/ivtv-devel


derliebegott at gmail

Apr 10, 2007, 11:30 PM

Post #10 of 24 (5307 views)
Permalink
Re: [ANN] ivtv on hold for the next few weeks [In reply to]
> Are you sure you are using the 0.10.1 user space apps?
>
> --
> Robin Gilks

yes I am.

# ivtvctl --version
ivtvctl version 0.10.1 (tagged release)

_______________________________________________
ivtv-devel mailing list
ivtv-devel [at] ivtvdriver
http://ivtvdriver.org/mailman/listinfo/ivtv-devel


Axel.Thimm at ATrpms

Apr 11, 2007, 4:50 AM

Post #11 of 24 (5286 views)
Permalink
Re: ivtv on hold for the next few weeks [In reply to]
On Tue, Apr 10, 2007 at 11:33:22PM +0200, Martin Dauskardt wrote:
> Good luck Hans!

And many thanks for all the work until now (and beyond ;)! :)

> BTW: http://ivtvdriver.org/viewcvs/ gives a "The requested URL
> /viewcvs/ was not found on this server"

Fixed.
--
Axel.Thimm at ATrpms.net


Axel.Thimm at ATrpms

Apr 11, 2007, 4:53 AM

Post #12 of 24 (5305 views)
Permalink
Re: ivtv on hold for the next few weeks [In reply to]
On Tue, Apr 10, 2007 at 10:56:41PM +0200, Hans Verkuil wrote:
> for my work I'll be moving to Lysaker, Norway for what will probably
> be the next 5-6 months. I'm leaving this Friday and I expect that it
> will take a while to settle in. It should be possible for me to
> continue my work on ivtv, but it will take some time to set
> everything up.

Hope all works nicely & successfully in Norway!

Perhaps an immediate 0.10.2 release with some of the fixes would be
nice, I can prepare it if you like.
--
Axel.Thimm at ATrpms.net


derliebegott at gmail

Apr 12, 2007, 3:14 PM

Post #13 of 24 (5264 views)
Permalink
Re: ivtv on hold for the next few weeks [In reply to]
Nobody has an idea?

I checked utils/ivtvctl.c for --reset-ir ... and:

----------------
if (option_reset_ir) {
doioctl(fd, VIDIOC_INT_RESET, NULL, "VIDIOC_INT_RESET");
}
...

static int doioctl(int fd, int request, void *parm, const char *name)
----------------

*parm is NULL? is that ok this way?

I always get "failed: invalid argument" with 0.10.1 .... any ideas?
how could I debug this why I get invalid argument?

I would appreciate any help.

Thanks.

_______________________________________________
ivtv-devel mailing list
ivtv-devel [at] ivtvdriver
http://ivtvdriver.org/mailman/listinfo/ivtv-devel


hverkuil at xs4all

Apr 12, 2007, 9:16 PM

Post #14 of 24 (5278 views)
Permalink
Re: ivtv on hold for the next few weeks [In reply to]
On Friday 13 April 2007 00:14, Ma Begaj wrote:
> Nobody has an idea?

You need the 0.10 branch. Get it here:

http://ivtvdriver.org/viewcvs/ivtv/branches/0.10.tar.gz?view=tar

Hans

>
> I checked utils/ivtvctl.c for --reset-ir ... and:
>
> ----------------
> if (option_reset_ir) {
> doioctl(fd, VIDIOC_INT_RESET, NULL,
> "VIDIOC_INT_RESET"); }
> ...
>
> static int doioctl(int fd, int request, void *parm, const char *name)
> ----------------
>
> *parm is NULL? is that ok this way?
>
> I always get "failed: invalid argument" with 0.10.1 .... any ideas?
> how could I debug this why I get invalid argument?
>
> I would appreciate any help.
>
> Thanks.
>
> _______________________________________________
> ivtv-devel mailing list
> ivtv-devel [at] ivtvdriver
> http://ivtvdriver.org/mailman/listinfo/ivtv-devel

_______________________________________________
ivtv-devel mailing list
ivtv-devel [at] ivtvdriver
http://ivtvdriver.org/mailman/listinfo/ivtv-devel


derliebegott at gmail

Apr 13, 2007, 3:30 AM

Post #15 of 24 (5267 views)
Permalink
Re: ivtv on hold for the next few weeks [In reply to]
Hans, thanks for your help.

I thought you were talking about latest 0.10.1.

remote control is working at the moment, also after reboot and I do
not need --reset-ir. But I tried to run it and I received the same
error as before. I loaded ivtv with and without newi2c=1.

Is that normal?

root [at] machin/# ivtvctl --reset-ir
ioctl VIDIOC_INT_RESET failed: Invalid argument
root [at] machin:/# ivtvctl --version
ivtvctl version 0.10.2 (development snapshot compiled on Fr 13 Apr
2007 12:12:44 CEST)



ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.10.2 (development snapshot compiled on Fr 13 Apr 2007
12:12:48 CEST) loading
ivtv: Linux version: 2.6.20.1 SMP mod_unload K8
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:03:08.0[A] -> Link [APC3] -> GSI 18 (level,
low) -> IRQ 21
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Encoder revision: 0x02060039
tveeprom 2-0050: Hauppauge model 26134, rev F1B3, serial# 10233063
tveeprom 2-0050: tuner model is TCL M2523_3DB_E (idx 113, type 55)
tveeprom 2-0050: TV standards PAL(B/G) PAL(D/D1/K) (eeprom 0x44)
tveeprom 2-0050: audio processor is CX25842 (idx 36)
tveeprom 2-0050: decoder processor is CX25842 (idx 29)
tveeprom 2-0050: has no radio, has IR receiver, has IR transmitter
ivtv0: Autodetected Hauppauge WinTV PVR-150
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
cx25840 2-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0)
cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: Registered device video0 for encoder MPEG (4 MB)
ivtv0: Registered device video32 for encoder YUV (2 MB)
ivtv0: Registered device vbi0 for encoder VBI (1 MB)
ivtv0: Registered device video24 for encoder PCM audio (1 MB)
tuner 2-0061: type set to 55 (TCL 2002MB)
ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
ivtv: ==================== END INIT IVTV ====================
lirc_dev: IR Remote Control driver registered, at major 61
lirc_i2c: no version for "lirc_unregister_plugin" found: kernel tainted.
cx2388x v4l2 driver version 0.0.6 loaded
lirc_i2c: chip found @ 0x71 (Hauppauge IR (PVR150))
lirc_dev: lirc_register_plugin: sample_rate: 10

_______________________________________________
ivtv-devel mailing list
ivtv-devel [at] ivtvdriver
http://ivtvdriver.org/mailman/listinfo/ivtv-devel


derliebegott at gmail

Apr 13, 2007, 8:28 AM

Post #16 of 24 (5268 views)
Permalink
Re: ivtv on hold for the next few weeks [In reply to]
> You need the 0.10 branch. Get it here:
>
> http://ivtvdriver.org/viewcvs/ivtv/branches/0.10.tar.gz?view=tar
>
> Hans


Hi Hans,

Thanks one more time, but it did not help. After cold reboot, IR
disappeared again. I tried with and without newi2c=1. And --reset-ir
gives me the same error as you can see below.


root [at] machin:/home/mm# modprobe lirc_i2c debug=1
root [at] machin:/home/mm# dmesg | grep lirc_
lirc_dev: IR Remote Control driver registered, at major 61
lirc_i2c: probe 0x1a @ ivtv i2c driver #0: no
lirc_i2c: probe 0x18 @ ivtv i2c driver #0: no
lirc_i2c: probe 0x71 @ ivtv i2c driver #0: no
lirc_i2c: probe 0x4b @ ivtv i2c driver #0: no
lirc_i2c: probe 0x64 @ ivtv i2c driver #0: no
lirc_i2c: probe 0x30 @ ivtv i2c driver #0: no
lirc_i2c: probe 0x6b @ ivtv i2c driver #0: no

root [at] machin:/home/mm# ivtvctl --reset-ir
ioctl VIDIOC_INT_RESET failed: Invalid argument

root [at] machin:/home/mm# ivtvctl --version
ivtvctl version 0.10.2 (development snapshot compiled on Fr 13 Apr
2007 12:12:44 CEST)

ivtv in dmesg:
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.10.2 (development snapshot compiled on Fr 13 Apr 2007
12:12:48 CEST) loading
ivtv: Linux version: 2.6.20.1 SMP mod_unload K8
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:03:08.0[A] -> Link [APC3] -> GSI 18 (level,
low) -> IRQ 21
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Encoder revision: 0x02060039
tveeprom 2-0050: Hauppauge model 26134, rev F1B3, serial# 10233063
tveeprom 2-0050: tuner model is TCL M2523_3DB_E (idx 113, type 55)
tveeprom 2-0050: TV standards PAL(B/G) PAL(D/D1/K) (eeprom 0x44)
tveeprom 2-0050: audio processor is CX25842 (idx 36)
tveeprom 2-0050: decoder processor is CX25842 (idx 29)
tveeprom 2-0050: has no radio, has IR receiver, has IR transmitter
ivtv0: Autodetected Hauppauge WinTV PVR-150
ivtv0: reopen i2c bus for IR-blaster support
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
cx25840 2-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0)
cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: Registered device video0 for encoder MPEG (4 MB)
ivtv0: Registered device video32 for encoder YUV (2 MB)
ivtv0: Registered device vbi0 for encoder VBI (1 MB)
ivtv0: Registered device video24 for encoder PCM audio (1 MB)
tuner 2-0061: type set to 55 (TCL 2002MB)
ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
ivtv: ==================== END INIT IVTV ====================

_______________________________________________
ivtv-devel mailing list
ivtv-devel [at] ivtvdriver
http://ivtvdriver.org/mailman/listinfo/ivtv-devel


derliebegott at gmail

Apr 23, 2007, 6:13 AM

Post #17 of 24 (5067 views)
Permalink
Re: ivtv on hold for the next few weeks [In reply to]
Anyone who could give me an advice on this problem? This card cannot
be used this way any more, because I have to suspend to ram my
computer a few times before the IR is again available. And if I
reboot, IR is gone again.

I was thinking about selling it, but I like everything about pvr150...

thanks

M.

_______________________________________________
ivtv-devel mailing list
ivtv-devel [at] ivtvdriver
http://ivtvdriver.org/mailman/listinfo/ivtv-devel


hverkuil at xs4all

Apr 23, 2007, 6:46 AM

Post #18 of 24 (5050 views)
Permalink
Re: ivtv on hold for the next few weeks [In reply to]
> Anyone who could give me an advice on this problem? This card cannot
> be used this way any more, because I have to suspend to ram my
> computer a few times before the IR is again available. And if I
> reboot, IR is gone again.
>
> I was thinking about selling it, but I like everything about pvr150...

Don't sell it! It's something simple, but I just haven't had time to look
at it. I hope to have a test machine up and running this week so that I
can start testing and fixing this issue.

BTW, it would be much appreciated if you can recap the precise problem,
I'm a bit fuzzy on the details and I cannot easily access the older emails
at the moment.

Regards,

Hans


_______________________________________________
ivtv-devel mailing list
ivtv-devel [at] ivtvdriver
http://ivtvdriver.org/mailman/listinfo/ivtv-devel


derliebegott at gmail

Apr 23, 2007, 3:38 PM

Post #19 of 24 (5072 views)
Permalink
Re: ivtv on hold for the next few weeks [In reply to]
> Don't sell it! It's something simple, but I just haven't had time to look
> at it. I hope to have a test machine up and running this week so that I
> can start testing and fixing this issue.
>
> BTW, it would be much appreciated if you can recap the precise problem,
> I'm a bit fuzzy on the details and I cannot easily access the older emails
> at the moment.


Hi Hans and thanks for your help.

My IR is mostly not recognized. After suspending my computer to ram
("standby"), IR comes back. But usually I have to suspend the computer
a few times before IR is being recognized. IR disappears every time
after reboot.

I tried 0.10 branch and it did not help. --reset-ir gives me still this error:

root [at] machin/# ivtvctl --reset-ir
ioctl VIDIOC_INT_RESET failed: Invalid argument

root [at] machin:/# ivtvctl --version
ivtvctl version 0.10.2 (development snapshot compiled on Fr 13 Apr
2007 12:12:44 CEST)


I tried loading ivtv with and without "newi2c=1", but no changes.

this is ivtv in dmesg (after "modprobe ivtv"):
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.10.2 (development snapshot compiled on Fr 13 Apr 2007
12:12:48 CEST) loading
ivtv: Linux version: 2.6.20.1 SMP mod_unload K8
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:03:08.0[A] -> Link [APC3] -> GSI 18 (level,
low) -> IRQ 21
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Encoder revision: 0x02060039
tveeprom 2-0050: Hauppauge model 26134, rev F1B3, serial# 10233063
tveeprom 2-0050: tuner model is TCL M2523_3DB_E (idx 113, type 55)
tveeprom 2-0050: TV standards PAL(B/G) PAL(D/D1/K) (eeprom 0x44)
tveeprom 2-0050: audio processor is CX25842 (idx 36)
tveeprom 2-0050: decoder processor is CX25842 (idx 29)
tveeprom 2-0050: has no radio, has IR receiver, has IR transmitter
ivtv0: Autodetected Hauppauge WinTV PVR-150
ivtv0: reopen i2c bus for IR-blaster support
- Zitierten Text ausblenden -
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
cx25840 2-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0)
cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: Registered device video0 for encoder MPEG (4 MB)
ivtv0: Registered device video32 for encoder YUV (2 MB)
ivtv0: Registered device vbi0 for encoder VBI (1 MB)
ivtv0: Registered device video24 for encoder PCM audio (1 MB)
tuner 2-0061: type set to 55 (TCL 2002MB)
ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
ivtv: ==================== END INIT IVTV ====================


Thanks a lot Hans.

M.

_______________________________________________
ivtv-devel mailing list
ivtv-devel [at] ivtvdriver
http://ivtvdriver.org/mailman/listinfo/ivtv-devel


md001 at gmx

Apr 24, 2007, 11:52 PM

Post #20 of 24 (5021 views)
Permalink
Re: [ANN] ivtv on hold for the next few weeks [In reply to]
> Fixed in the ivtv trunk, and it's queued for the v4l-dvb tree.

Hi Hans,

it is still not merged in the main hg. Can you remind Mauro?

Greets,
Martin
--
"Feel free" - 10 GB Mailbox, 100 FreeSMS/Monat ...
Jetzt GMX TopMail testen: http://www.gmx.net/de/go/topmail

_______________________________________________
ivtv-devel mailing list
ivtv-devel [at] ivtvdriver
http://ivtvdriver.org/mailman/listinfo/ivtv-devel


hverkuil at xs4all

Apr 25, 2007, 12:27 AM

Post #21 of 24 (5030 views)
Permalink
Re: [ANN] ivtv on hold for the next few weeks [In reply to]
>> Fixed in the ivtv trunk, and it's queued for the v4l-dvb tree.
>
> Hi Hans,
>
> it is still not merged in the main hg. Can you remind Mauro?

I've mailed Mauro a reminder. I think I forgot to CC the pull request to
him the first time, which might be why he missed it.

Thanks,

Hans


_______________________________________________
ivtv-devel mailing list
ivtv-devel [at] ivtvdriver
http://ivtvdriver.org/mailman/listinfo/ivtv-devel


derliebegott at gmail

Apr 25, 2007, 2:01 AM

Post #22 of 24 (5009 views)
Permalink
Re: [ANN] ivtv on hold for the next few weeks [In reply to]
> >> Fixed in the ivtv trunk, and it's queued for the v4l-dvb tree.
> >
> > Hi Hans,
> >
> > it is still not merged in the main hg. Can you remind Mauro?
>
> I've mailed Mauro a reminder. I think I forgot to CC the pull request to
> him the first time, which might be why he missed it.

could this also have something to do with my problem?

thanks.

M.

_______________________________________________
ivtv-devel mailing list
ivtv-devel [at] ivtvdriver
http://ivtvdriver.org/mailman/listinfo/ivtv-devel


hverkuil at xs4all

Apr 25, 2007, 2:27 AM

Post #23 of 24 (5007 views)
Permalink
Re: [ANN] ivtv on hold for the next few weeks [In reply to]
>> >> Fixed in the ivtv trunk, and it's queued for the v4l-dvb tree.
>> >
>> > Hi Hans,
>> >
>> > it is still not merged in the main hg. Can you remind Mauro?
>>
>> I've mailed Mauro a reminder. I think I forgot to CC the pull request to
>> him the first time, which might be why he missed it.
>
> could this also have something to do with my problem?

No.

Hans


_______________________________________________
ivtv-devel mailing list
ivtv-devel [at] ivtvdriver
http://ivtvdriver.org/mailman/listinfo/ivtv-devel


hverkuil at xs4all

Apr 26, 2007, 6:50 AM

Post #24 of 24 (4981 views)
Permalink
Re: [ANN] ivtv on hold for the next few weeks [In reply to]
>>> Fixed in the ivtv trunk, and it's queued for the v4l-dvb tree.
>>
>> Hi Hans,
>>
>> it is still not merged in the main hg. Can you remind Mauro?
>
> I've mailed Mauro a reminder. I think I forgot to CC the pull request to
> him the first time, which might be why he missed it.

It's now merged in the v4l-dvb repo.

Hans


_______________________________________________
ivtv-devel mailing list
ivtv-devel [at] ivtvdriver
http://ivtvdriver.org/mailman/listinfo/ivtv-devel

ivtv devel RSS feed   Index | Next | Previous | View Threaded
 
 


Interested in having your list archived? Contact Gossamer Threads
 
  Web Applications & Managed Hosting Powered by Gossamer Threads Inc.