Login | Register For Free | Help
Search for: (Advanced)

Mailing List Archive: ivtv: devel

CX23418 support

 

 

ivtv devel RSS feed   Index | Next | Previous | View Threaded


aizvorski at gmail

Feb 10, 2007, 9:12 AM

Post #1 of 4 (1601 views)
Permalink
CX23418 support

Hello,

I am wondering what it would take to get support for the CX23418 chip?
Is anybody already working on it? How much work is it? Are people at
least interested?

I am trying to obtain a datasheet, I'll keep you all posted ;)

It seems like cards based on this (HVR-1600 etc) mey be gradually
replacing the CX23416-based cards, at least in the Hauppauge product
line, so this is going to become kind of important.

Regards,
--Alex



_______________________________________________
ivtv-devel mailing list
ivtv-devel[at]ivtvdriver.org
http://ivtvdriver.org/mailman/listinfo/ivtv-devel


sander.sweers at gmail

Feb 11, 2007, 7:42 AM

Post #2 of 4 (1459 views)
Permalink
Re: CX23418 support [In reply to]

Alex Izvorski wrote:
> I am wondering what it would take to get support for the CX23418 chip?

Hans (The main developer atm), estimated it would take at least 6 months
for it to be done. But this was by himself probably and any help you or
other people can give will speed this up. Code wise I have no clue.

> Is anybody already working on it? How much work is it? Are people at
> least interested?

Nobody as none have the datasheet. Without it it will be very difficult
and will take a long time.

> I am trying to obtain a datasheet, I'll keep you all posted ;)

Hans is/was trying the same :-)

> It seems like cards based on this (HVR-1600 etc) mey be gradually
> replacing the CX23416-based cards, at least in the Hauppauge product
> line, so this is going to become kind of important.

Hans, CCing you to be sure you read this ;-) You may have a partner in
getting the CX23418 supported.

Greets
Sander

_______________________________________________
ivtv-devel mailing list
ivtv-devel[at]ivtvdriver.org
http://ivtvdriver.org/mailman/listinfo/ivtv-devel


hverkuil at xs4all

Feb 11, 2007, 12:04 PM

Post #3 of 4 (1466 views)
Permalink
Re: CX23418 support [In reply to]

On Sunday 11 February 2007 16:42, Sander Sweers wrote:
> Alex Izvorski wrote:
> > I am wondering what it would take to get support for the CX23418
> > chip?
>
> Hans (The main developer atm), estimated it would take at least 6
> months for it to be done. But this was by himself probably and any
> help you or other people can give will speed this up. Code wise I
> have no clue.
>
> > Is anybody already working on it? How much work is it? Are people
> > at least interested?
>
> Nobody as none have the datasheet. Without it it will be very
> difficult and will take a long time.
>
> > I am trying to obtain a datasheet, I'll keep you all posted ;)
>
> Hans is/was trying the same :-)
>
> > It seems like cards based on this (HVR-1600 etc) mey be gradually
> > replacing the CX23416-based cards, at least in the Hauppauge
> > product line, so this is going to become kind of important.
>
> Hans, CCing you to be sure you read this ;-) You may have a partner
> in getting the CX23418 supported.

Alex,

It would be great if you can get the datasheet (legally). Through other
contacts I'm also trying to obtain it. Basically it is a case of hoping
Conexant will see the light and be willing to release the datasheet
(possibly under an NDA) for the purposes of writing a GPL driver. To be
completely honest, I'm not holding my breath.

We'll see.

Hans

_______________________________________________
ivtv-devel mailing list
ivtv-devel[at]ivtvdriver.org
http://ivtvdriver.org/mailman/listinfo/ivtv-devel


nicholas at dmpip

Feb 11, 2007, 12:26 PM

Post #4 of 4 (1467 views)
Permalink
Re: CX23418 support [In reply to]

I wouldn't be holding my breath either - I was developing some
hardware last year and Conexant were quite insistent I should spend €€
€ with one of their development partners to get datasheets (I think
it was about £12 GBP!!!). So I used someone else's IC's.

Hope you get them though.

Nick

On 11 Feb 2007, at 20:04, Hans Verkuil wrote:

> On Sunday 11 February 2007 16:42, Sander Sweers wrote:
>> Alex Izvorski wrote:
>>> I am wondering what it would take to get support for the CX23418
>>> chip?
>>
>> Hans (The main developer atm), estimated it would take at least 6
>> months for it to be done. But this was by himself probably and any
>> help you or other people can give will speed this up. Code wise I
>> have no clue.
>>
>>> Is anybody already working on it? How much work is it? Are people
>>> at least interested?
>>
>> Nobody as none have the datasheet. Without it it will be very
>> difficult and will take a long time.
>>
>>> I am trying to obtain a datasheet, I'll keep you all posted ;)
>>
>> Hans is/was trying the same :-)
>>
>>> It seems like cards based on this (HVR-1600 etc) mey be gradually
>>> replacing the CX23416-based cards, at least in the Hauppauge
>>> product line, so this is going to become kind of important.
>>
>> Hans, CCing you to be sure you read this ;-) You may have a partner
>> in getting the CX23418 supported.
>
> Alex,
>
> It would be great if you can get the datasheet (legally). Through
> other
> contacts I'm also trying to obtain it. Basically it is a case of
> hoping
> Conexant will see the light and be willing to release the datasheet
> (possibly under an NDA) for the purposes of writing a GPL driver.
> To be
> completely honest, I'm not holding my breath.
>
> We'll see.
>
> Hans
>
> _______________________________________________
> ivtv-devel mailing list
> ivtv-devel[at]ivtvdriver.org
> http://ivtvdriver.org/mailman/listinfo/ivtv-devel



_______________________________________________
ivtv-devel mailing list
ivtv-devel[at]ivtvdriver.org
http://ivtvdriver.org/mailman/listinfo/ivtv-devel

ivtv devel RSS feed   Index | Next | Previous | View Threaded
 
 


Interested in having your list archived? Contact lists@gossamer-threads.com
 
  Web Applications & Managed Hosting Powered by Gossamer Threads Inc.