linpvr at projectplasma
Feb 9, 2003, 9:20 AM
Post #2 of 2
(1277 views)
Permalink
|
On Sun, 9 Feb 2003, kevin thayer wrote:
> I should have it stable by tomorrow hopefully. I'll
> include the saa7115 stuff i've got so far in the cvs
> update so that people can get a garbled dump from
> their card.. hey it's better than nothing :)
I'll bounce a note at Steve.
You know what might work?
1. Start up your machine in Windows (to get the 7115 initialized)
2. run a capture from the tuner (to get the 7115 init'd for tuner)
3. boot into Linux (loadlin is probably better than a reboot)
4. load your driver /without/ performing the 7115 init, but do pass
the start command.
If this works, redo step #1 and dump the 7115's registers. Then go back and
do steps #1 and #2 and dump.
If you don't have Windows available, I suppose I could try this, but I've
getting flu symptoms again. [This flu on-again-off-again state will haunt me
until July]
-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com
_______________________________________________
ivtv-devel mailing list
ivtv-devel [at] lists
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
|
