Mailing List Archive: ivtv: devel

error -12 on AMD64

Index | Next | Previous | View Threaded

dbadia at gmail

Jul 29, 2005, 11:08 PM

Post #1 of 3 (513 views)
Permalink

error -12 on AMD64

Hi everyone,
Been trying to set up a PVR-350 on a new AMD64 box for a few days now....
I'm getting the following errors after modprobe ivtv:

Jul 30 02:10:25 localhost kernel: ivtv: Encoder mailbox not found
Jul 30 02:10:25 localhost kernel: ivtv: Decoder mailbox not found
Jul 30 02:10:25 localhost kernel: ivtv-iTVC15_16_mpg2_encoder_card:
probe of 0000:00:0c.0 failed with error -12

I've searched through the forums, and have tried various
recommendations to no avail. I've also tried various versions of
IVTV.

Upon boot, here are the loaded modules:
Module Size Used by
snd_via82xx 25728 0
snd_ac97_codec 85968 1 snd_via82xx
snd_mpu401_uart 7936 1 snd_via82xx
snd_rawmidi 24224 1 snd_mpu401_uart
sk98lin 160480 0
nvidia 4382084 0
dm_mod 51552 2

I then modprobe msp3400, saa7127, tveeprom debug=2, ivtv

Any thoughts or suggestions would be greatly appreciated!
(Full output of dmesg is below)

Thanks
Dave

Jul 30 02:10:24 localhost kernel: ivtv: ==================== START
INIT IVTV ====================
Jul 30 02:10:24 localhost kernel: ivtv: version 0.2.0 (rc3j) loading
Jul 30 02:10:24 localhost kernel: ivtv: Linux version: 2.6.12.3 SMP gcc-3.4
Jul 30 02:10:24 localhost kernel: ivtv: In case of problems please
include the debug info
Jul 30 02:10:24 localhost kernel: ivtv: between the START INIT IVTV
and END INIT IVTV lines when
Jul 30 02:10:24 localhost kernel: ivtv: mailing the ivtv-devel mailinglist.
Jul 30 02:10:24 localhost kernel: ivtv: Autodetected WinTV PVR 350 card
Jul 30 02:10:24 localhost kernel: ivtv: Found an iTVC15 based chip
Jul 30 02:10:24 localhost kernel: ACPI: PCI Interrupt 0000:00:0c.0[A]
-> GSI 17 (level, low) -> IRQ 193
Jul 30 02:10:24 localhost kernel: ivtv: VIA PCI device: 0x0282 vendor: 0x1106
Jul 30 02:10:24 localhost kernel: msp34xx: ivtv version
Jul 30 02:10:24 localhost kernel: msp34xx: init: chip=MSP3448W-A2, has
NICAM support, simple (D) mode, simpler (G) no-thread mode
Jul 30 02:10:24 localhost kernel: msp34xx: $Id$ compiled on: Jul 30
2005 02:04:42
Jul 30 02:10:24 localhost kernel: ivtv: i2c attach [client=MSP3448W-A2,ok]
Jul 30 02:10:24 localhost kernel: saa7127: detecting saa7127 client on
address 0x88
Jul 30 02:10:24 localhost kernel: saa7127: Selecting NTSC video Standard
Jul 30 02:10:24 localhost kernel: saa7127: Selecting S-Video+Composite
Jul 30 02:10:24 localhost kernel: saa7127: Turn WSS off
Jul 30 02:10:24 localhost kernel: saa7127: Widescreen Mode 4:3 Full Format
Jul 30 02:10:24 localhost kernel: saa7127: Selecting Normal Encoder Input
Jul 30 02:10:24 localhost kernel: saa7127: Enable Video Output
Jul 30 02:10:24 localhost kernel: ivtv: i2c attach [client=saa7127,ok]
Jul 30 02:10:25 localhost kernel: tveeprom: starting probe for adapter
ivtv i2c driver #0 (0x10005)
Jul 30 02:10:25 localhost kernel: tveeprom: detecting tveeprom client
on address 0xa0
Jul 30 02:10:25 localhost kernel: tveeprom: processing pos = 00 (84, 09)
Jul 30 02:10:25 localhost kernel: tveeprom: 9 [04] <6>tveeprom: 20
<6>tveeprom: 77 <6>tveeprom: 00 <6>tveeprom: 40 <6>tveeprom: 93
<6>tveeprom: 2c <6>tveeprom: 64 <6>tveeprom: 00 <6>tveeprom:
Jul 30 02:10:25 localhost kernel: tveeprom: processing pos = 0c (73, 05)
Jul 30 02:10:25 localhost kernel: tveeprom: 3 [05] <6>tveeprom: 9b
<6>tveeprom: 00 <6>tveeprom:
Jul 30 02:10:25 localhost kernel: tveeprom: processing pos = 10 (84, 08)
Jul 30 02:10:25 localhost kernel: tveeprom: 8 [06] <6>tveeprom: 04
<6>tveeprom: bc <6>tveeprom: 00 <6>tveeprom: 00 <6>tveeprom: 93
<6>tveeprom: 34 <6>tveeprom: a9 <6>tveeprom:
Jul 30 02:10:25 localhost kernel: tveeprom: processing pos = 1b (72, 07)
Jul 30 02:10:25 localhost kernel: tveeprom: 2 [07] <6>tveeprom: 70
<6>tveeprom:
Jul 30 02:10:25 localhost kernel: tveeprom: Not sure what to do with tag [07]
Jul 30 02:10:25 localhost kernel: tveeprom: processing pos = 1e (73, 09)
Jul 30 02:10:25 localhost kernel: tveeprom: 3 [09] <6>tveeprom: 13
<6>tveeprom: 5f <6>tveeprom:
Jul 30 02:10:25 localhost kernel: tveeprom: Not sure what to do with tag [09]
Jul 30 02:10:25 localhost kernel: tveeprom: processing pos = 22 (73, 0a)
Jul 30 02:10:25 localhost kernel: tveeprom: 3 [0a] <6>tveeprom: 08
<6>tveeprom: 17 <6>tveeprom:
Jul 30 02:10:25 localhost kernel: tveeprom: processing pos = 26 (73, 0b)
Jul 30 02:10:25 localhost kernel: tveeprom: 3 [0b] <6>tveeprom: 59
<6>tveeprom: 8c <6>tveeprom:
Jul 30 02:10:25 localhost kernel: tveeprom: Not sure what to do with tag [0b]
Jul 30 02:10:25 localhost kernel: tveeprom: processing pos = 2a (72, 0e)
Jul 30 02:10:25 localhost kernel: tveeprom: 2 [0e] <6>tveeprom: 01
<6>tveeprom:
Jul 30 02:10:25 localhost kernel: tveeprom: processing pos = 2d (72, 0f)
Jul 30 02:10:25 localhost kernel: tveeprom: 2 [0f] <6>tveeprom: 01
<6>tveeprom:
Jul 30 02:10:25 localhost kernel: tveeprom: Not sure what to do with tag [0f]
Jul 30 02:10:25 localhost kernel: tveeprom: processing pos = 30 (72, 10)
Jul 30 02:10:25 localhost kernel: tveeprom: 2 [10] <6>tveeprom: 01
<6>tveeprom:
Jul 30 02:10:25 localhost kernel: tveeprom: Not sure what to do with tag [10]
Jul 30 02:10:25 localhost kernel: tveeprom: processing pos = 33 (72, 11)
Jul 30 02:10:25 localhost kernel: tveeprom: 2 [11] <6>tveeprom: 00
<6>tveeprom:
Jul 30 02:10:25 localhost kernel: tveeprom: Not sure what to do with tag [11]
Jul 30 02:10:25 localhost kernel: tveeprom: processing pos = 36 (79, 48)
Jul 30 02:10:25 localhost kernel: tveeprom: Hauppauge: model = 48132,
rev = J323, serial# = 6565011
Jul 30 02:10:25 localhost kernel: tveeprom: tuner = Philips FM1236
(idx = 23, type = 2)
Jul 30 02:10:25 localhost kernel: tveeprom: tuner fmt = NTSC(M)
(eeprom = 0x08, v4l2 = 0x00001000)
Jul 30 02:10:25 localhost kernel: tveeprom: audio_processor = MSP3440
(type = 11)
Jul 30 02:10:25 localhost kernel: ivtv: i2c attach [client=tveeprom,ok]
Jul 30 02:10:25 localhost kernel: ivtv: Tuner Type 2, Tuner formats
0x00001000, Radio: yes, Model 0x00a93493, Revision 0x00000001
Jul 30 02:10:25 localhost kernel: ivtv: NTSC tuner detected
Jul 30 02:10:25 localhost kernel: ivtv: Radio detected
Jul 30 02:10:25 localhost kernel: ivtv: Encoder mailbox not found
Jul 30 02:10:25 localhost kernel: ivtv: Decoder mailbox not found
Jul 30 02:10:25 localhost kernel: ivtv-iTVC15_16_mpg2_encoder_card:
probe of 0000:00:0c.0 failed with error -12
Jul 30 02:10:25 localhost kernel: ivtv: ==================== END INIT
IVTV ====================

-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_idt77&alloc_id492&op=click
_______________________________________________
ivtv-devel mailing list
ivtv-devel [at] lists
https://lists.sourceforge.net/lists/listinfo/ivtv-devel

Loial at home

Jul 30, 2005, 1:29 AM

Post #2 of 3 (530 views)
Permalink

Re: error -12 on AMD64 [In reply to]

On Saturday 30 July 2005 08:08, Dave wrote:
> Hi everyone,
> Been trying to set up a PVR-350 on a new AMD64 box for a few days
> now....

> I then modprobe msp3400, saa7127, tveeprom debug=2, ivtv

ivtv is able to load all the modules it needs/depends on automatically, so I'd
start with just modprobing ivtv (or when you get things working in a bit, you
can change that to ivtv-fb so you can run X over the 350)

> Jul 30 02:10:24 localhost kernel: ivtv: version 0.2.0 (rc3j) loading
> Jul 30 02:10:24 localhost kernel: ivtv: Linux version: 2.6.12.3 SMP gcc-3.4

Myself I have not had success with the 0.2.0 version on a 64bit system. Please
give 0.3.x a try.
0.3.6s is the last known good for me. I had some trouble myself with 0.3.6z
and higher, but that might simply be a local problem, so just give them a
shot.
Hope this helps.

Thanks,
Rutger

dbadia at gmail

Jul 30, 2005, 8:00 AM

Post #3 of 3 (528 views)
Permalink

Re: error -12 on AMD64 [In reply to]

On 7/30/05, Rutger Hendriks <Loial [at] home> wrote:
> On Saturday 30 July 2005 08:08, Dave wrote:
> > Hi everyone,
> > Been trying to set up a PVR-350 on a new AMD64 box for a few days
> > now....
>
> > I then modprobe msp3400, saa7127, tveeprom debug=2, ivtv
>
> ivtv is able to load all the modules it needs/depends on automatically, so I'd
> start with just modprobing ivtv (or when you get things working in a bit, you
> can change that to ivtv-fb so you can run X over the 350)
>
> > Jul 30 02:10:24 localhost kernel: ivtv: version 0.2.0 (rc3j) loading
> > Jul 30 02:10:24 localhost kernel: ivtv: Linux version: 2.6.12.3 SMP gcc-3.4
>
> Myself I have not had success with the 0.2.0 version on a 64bit system. Please
> give 0.3.x a try.
> 0.3.6s is the last known good for me. I had some trouble myself with 0.3.6z
> and higher, but that might simply be a local problem, so just give them a
> shot.
> Hope this helps.
>
> Thanks,
> Rutger
>
>

Thanks for the suggestions - I've tried a few different versions of
IVTV, which all give me various errors.
The strange part is that, suddenly, whenever I modprobe ivtv, my
kernel panics and the box freezes up.
I've tried with IVTV ivtv-0.2.0-rc3k, ivtv-0.3.4p, ivtv-0.3.6s,
ivtv-0.3.6z, ivtv-0.3.7a which are all giving me kernel panics.

With ivtv-0.3.6s:
Jul 30 12:28:11 localhost kernel: ivtv: ==================== START
INIT IVTV ====================
Jul 30 12:28:11 localhost kernel: ivtv: version 0.3.6 (s) loading
Jul 30 12:28:11 localhost kernel: ivtv: Linux version: 2.6.12.3 SMP gcc-3.4
Jul 30 12:28:11 localhost kernel: ivtv: In case of problems please
include the debug info
Jul 30 12:28:11 localhost kernel: ivtv: between the START INIT IVTV
and END INIT IVTV lines when
Jul 30 12:28:11 localhost kernel: ivtv: mailing the ivtv-devel mailinglist.
Jul 30 12:28:11 localhost kernel: ivtv: Autodetected WinTV PVR 350 card
Jul 30 12:28:11 localhost kernel: ivtv: Found an iTVC15 based chip
Jul 30 12:28:11 localhost kernel: ACPI: PCI Interrupt 0000:00:0c.0[A]
-> GSI 17 (level, low) -> IRQ 193
Jul 30 12:28:11 localhost kernel: ivtv: VIA PCI device: 0x0282 vendor: 0x1106
Jul 30 12:28:11 localhost kernel: tveeprom: starting probe for adapter
ivtv i2c driver #0 (0x10005)
Jul 30 12:28:11 localhost kernel: ivtv: i2c client addr: 0x50 not
found for command 0!

Not sure what to do now...

Thanks for your help!
Dave

-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_idt77&alloc_id492&op=click
_______________________________________________
ivtv-devel mailing list
ivtv-devel [at] lists
https://lists.sourceforge.net/lists/listinfo/ivtv-devel

Index | Next | Previous | View Threaded

Interested in having your list archived? Contact Gossamer Threads