tstambolija at rogers
Mar 23, 2005, 7:05 AM
Post #1 of 1
(406 views)
Permalink
|
|
pvr 150MCE (TAPE tun. 47) is running on FC3 but I still have some issues.
|
|
Hi,
For the first Thank you all for great work.
I finally got my pvr-150MCE working using itvtv 0.3.2k and latest
firmware from Hauppage, but I still have some problems.
1. After (from 20 sec. to 30 min.) some time system log will be filled
with messages like "ivtv: ENC IRQ OVERFLOW: #155 Stealing a Buffer, 1025
currently allocated" and at that point havy HD activity will make
further watching impossible. I tried to run mplayer with -nocache and
with -cache 8194 with no noticable difference.
2. Executing ptune.pl -c5 will return Ch.5: 77250 1236 Error:
setFrequency(1236) failed!, but ivtvctl -r 1236 will properly set tuner
to desired frequency.
3. Picture quality is very good with exception of few white lines at
the top of the screen.
I am using input from NTSC cable and I am running Sempron 2.6/512M, if
you need more details just let me know.
Regards,
Tomislav
/etc/modprobe.conf
# ivtv modules setup
alias char-major-81 videodev
alias char-major-81-0 ivtv
options ivtv ivtv_std=1 tuner=47
options cx25840 no_black_magic=1 audiofmt=1
/var/log/messages
kernel: ivtv: ==================== START INIT IVTV ====================
kernel: ivtv: version 0.3.2 (k) loading
kernel: ivtv: Linux version: 2.6.10-1.770_FC3 686 REGPARM 4KSTACKS
gcc-3.4
kernel: ivtv: In case of problems please include the debug info
kernel: ivtv: between the START INIT IVTV and END INIT IVTV lines when
kernel: ivtv: mailing the ivtv-devel mailinglist.
kernel: ivtv: Autodetected WinTV PVR 150 card
kernel: ivtv: Found an iTVC16 based chip
kernel: ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 5
kernel: PCI: setting IRQ 5 as level-triggered
kernel: ACPI: PCI interrupt 0000:01:07.0[A] -> GSI 5 (level, low) -> IRQ
5
kernel: ivtv: Unreasonably low latency timer, setting to 64 (was 32)
kernel: ivtv: XXX PCI device: 0x01e0 vendor: 0x10de
kernel: tveeprom: Hauppauge: model = 26552, rev = C268, serial# =
7759392
kernel: tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47)
kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
kernel: tveeprom: audio_processor = MSP3410D (type = 5)
kernel: ivtv: i2c attach [client=tveeprom[0],ok]
kernel: ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model
0x008d2598, Revision 0x00000001
kernel: ivtv: Radio detected
kernel: tuner: Ignoring new-style parameters in presence of obsolete
ones
kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
kernel: ivtv: i2c attach [client=(tuner unset),ok]
kernel: cx25840: Ignoring new-style parameters in presence of obsolete
ones
kernel: cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 14264
loaded.
kernel: cx25840: FW image md5 digest: 3a4803384f749d644ee1f1ca9dcb12fa
kernel: cx25840: FW image sha1 digest:
2b5e6292b7391c980b93d156cf6b34178ce770f6
kernel: ivtv: i2c attach [client=cx25840[0],ok]
kernel: ivtv: i2c attach [client=wm8775[0],ok]
kernel: ivtv: Encoder revision: 0x02040011
kernel: ivtv: Configuring WinTV PVR 150 card with 5 streams
kernel: ivtv: Registered v4l2 device, streamtype 0 minor 0
kernel: ivtv: Create DMA stream 0 using 1024 16384 byte buffers 0
kbytes total
kernel: ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers
16777216 kbytes total
kernel: ivtv: Registered v4l2 device, streamtype 1 minor 32
kernel: ivtv: Create DMA stream 1
kernel: ivtv: Allocate DMA stream 1
kernel: ivtv: Registered v4l2 device, streamtype 2 minor 224
kernel: ivtv: Create stream 2 using 40 52224 byte buffers 0 kbytes
total
kernel: ivtv: Allocate stream 2 using 40 52224 byte buffers 2097152
kbytes total
kernel: ivtv: Registered v4l2 device, streamtype 3 minor 24
kernel: ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes
total
kernel: ivtv: Allocate DMA stream 3 using 455 4608 byte buffers 2097152
kbytes total
kernel: ivtv: Registered v4l2 device, streamtype 4 minor 64
kernel: ivtv: Create stream 4
kernel: ivtv: Allocate stream 4
kernel: ivtv: Setting Tuner 47
kernel: tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver
#0
kernel: ivtv: ivtv_enc_thread: pid = 5457, itv = 0xe11b6ca0
kernel: ivtv: Switching standard to NTSC.
kernel: ivtv: Initialized WinTV PVR 150, card #0
kernel: ivtv: ==================== END INIT IVTV ====================
-------------------------------------------------------
This SF.net email is sponsored by: 2005 Windows Mobile Application Contest
Submit applications for Windows Mobile(tm)-based Pocket PCs or Smartphones
for the chance to win $25,000 and application distribution. Enter today at
http://ads.osdn.com/?ad_id=6882&alloc_id=15148&op=click
_______________________________________________
ivtv-devel mailing list
ivtv-devel [at] lists
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
|
