witmore1 at gmail
Jan 21, 2005, 8:34 AM
Post #3 of 4
(1164 views)
Permalink
|
I fixed it with adding
alias tveeprom tveeprom-ivtv
to my /etc/modprobe.conf in fedora core that fixed it also
On Fri, 21 Jan 2005 02:56:56 -0500, Alan Gonzalez
<alandgonzalez[at]gmail.com> wrote:
> This seems to be going around lately. Make sure you are using the
> right modules. It seems that you might need to rename a couple
> modules that come with the kernel because of duplicates. Look at the
> PVR 350 posts on 0x50 errors. They fixed it by renaming *-ivtv.ko to
> the regular .ko file. I'm assuming here that the tveeprom is the
> problem first.
>
>
> On Thu, 20 Jan 2005 22:58:22 -0800, James Fillman <crossfader[at]gmail.com> wrote:
> > I've had my 250 working once before(well, sound wasn't working, but at
> > least i could change channels). Here's the output of the ivtv driver
> > when it was working:
> >
> > Jan 5 20:05:49 myth kernel: ivtv: ==================== START INIT
> > IVTV ====================
> > Jan 5 20:05:49 myth kernel: ivtv: version 0.1.10
> > (0.1.10-48.3_pre2_ck100zz.rhfc3.at) loading
> > Jan 5 20:05:49 myth kernel: ivtv: Linux version: 2.6.9-1.681_FC3 686
> > REGPARM 4KSTACKS gcc-3.4
> > Jan 5 20:05:49 myth kernel: ivtv: In case of problems please include
> > the debug info
> > Jan 5 20:05:49 myth kernel: ivtv: between the START INIT IVTV and END
> > INIT IVTV lines when
> > Jan 5 20:05:49 myth kernel: ivtv: mailing the ivtv-devel mailinglist.
> > Jan 5 20:05:49 myth kernel: ivtv: Autodetected WinTV PVR 250 card
> > Jan 5 20:05:49 myth kernel: ivtv: Found an iTVC16 based chip
> > Jan 5 20:05:49 myth kernel: ACPI: PCI interrupt 0000:00:08.0[A] ->
> > GSI 5 (level, low) -> IRQ 5
> > Jan 5 20:05:49 myth kernel: ivtv: pci: VIA detected device: 0x3099
> > vendor: 0x1106
> > Jan 5 20:05:49 myth kernel: tveeprom: Ignoring new-style parameters
> > in presence of obsolete ones
> > Jan 5 20:05:49 myth kernel: tveeprom: Hauppauge: model = 32552, rev =
> > C168, serial# = 7356678
> > Jan 5 20:05:49 myth kernel: tveeprom: tuner = LG NTSC (TAPE series)
> > (idx = 68, type = 47)
> > Jan 5 20:05:49 myth kernel: tveeprom: tuner fmt = NTSC(M) (eeprom =
> > 0x08, v4l2 = 0x00001000)
> > Jan 5 20:05:50 myth kernel: tveeprom: audio_processor = MSP3440 (type = 11)
> > Jan 5 20:05:50 myth kernel: ivtv: i2c attach [client=tveeprom[0],ok]
> > Jan 5 20:05:50 myth kernel: ivtv: Tuner Type 47, Tuner formats
> > 0x00001000, Radio: yes, Model 0x008d1598, Revision 0x00000001
> > Jan 5 20:05:50 myth kernel: ivtv: NTSC tuner detected
> > Jan 5 20:05:50 myth kernel: ivtv: Radio detected
> > Jan 5 20:05:50 myth kernel: tuner: Ignoring new-style parameters in
> > presence of obsolete ones
> > Jan 5 20:05:50 myth kernel: tuner: chip found at addr 0xc2 i2c-bus
> > ivtv i2c driver #0
> > Jan 5 20:05:50 myth kernel: ivtv: i2c attach [client=(tuner unset),ok]
> > Jan 5 20:05:50 myth kernel: saa7115: Ignoring new-style parameters in
> > presence of obsolete ones
> > Jan 5 20:05:50 myth kernel: saa7115: starting probe for adapter ivtv
> > i2c driver #0 (0x10005)
> > Jan 5 20:05:50 myth kernel: saa7115: detecting saa7115 client on address 0x42
> > Jan 5 20:05:50 myth kernel: saa7115: writing init values
> > Jan 5 20:05:50 myth kernel: ivtv: i2c attach [client=saa7115[0],ok]
> > Jan 5 20:05:50 myth kernel: saa7115: status: (1E) 0x50, (1F) 0xc0
> > Jan 5 20:05:50 myth kernel: msp3400: Ignoring new-style parameters in
> > presence of obsolete ones
> > Jan 5 20:05:50 myth kernel: msp34xx: init: chip=MSP3448W-A2 +nicam
> > +simple +simpler +radio mode=simpler
> > Jan 5 20:05:50 myth kernel: ivtv: i2c attach [client=MSP3448W-A2,ok]
> > Jan 5 20:05:51 myth kernel: ivtv: Encoder revision: 0x02040024
> > Jan 5 20:05:51 myth kernel: ivtv: Configuring WinTV PVR 250 card with 5 streams
> > Jan 5 20:05:51 myth kernel: ivtv: Create DMA stream 0 using 128
> > buffers of size 32768
> > Jan 5 20:05:51 myth kernel: ivtv: Create DMA stream 1 using 128
> > buffers of size 32768
> > Jan 5 20:05:51 myth kernel: ivtv: Create stream 2 using 128 buffers
> > of size 52224
> > Jan 5 20:05:51 myth kernel: ivtv: Create DMA stream 3 using 128
> > buffers of size 32768
> > Jan 5 20:05:51 myth kernel: ivtv: Create stream 4
> > Jan 5 20:05:51 myth kernel: ivtv: Setting Tuner 47
> > Jan 5 20:05:51 myth kernel: tuner: type set to 47 (LG NTSC (TAPE
> > series)) by ivtv i2c driver #0
> > Jan 5 20:05:51 myth kernel: ivtv: Setting audio matrix to input 3, output 1
> > Jan 5 20:05:51 myth kernel: ivtv: Switching standard to NTSC.
> > Jan 5 20:05:52 myth kernel: saa7115: decoder set norm NTSC
> > Jan 5 20:05:52 myth kernel: saa7115: set audio: 0x01
> > Jan 5 20:05:52 myth kernel: ivtv: Initialized WinTV PVR 250, card #0
> > Jan 5 20:05:52 myth kernel: ivtv: ==================== END INIT IVTV
> > ====================
> >
> > And now here's the output when it's not working:
> > I don't know why the tuner is no longer being detected. I've upgraded
> > the kernel and driver. I'm really at a loss.
> >
> > ivtv: ==================== START INIT IVTV ====================
> > ivtv: version 0.1.10 (0.1.10-49_pre2_ck100zz.rhfc3.at) loading
> > ivtv: Linux version: 2.6.10-1.737_FC3 686 REGPARM 4KSTACKS gcc-3.4
> > ivtv: In case of problems please include the debug info
> > ivtv: between the START INIT IVTV and END INIT IVTV lines when
> > ivtv: mailing the ivtv-devel mailinglist.
> > ivtv: Autodetected WinTV PVR 250 card
> > ivtv: Found an iTVC16 based chip
> > ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 5 (level, low) -> IRQ 5
> > ivtv: pci: VIA detected device: 0x3099 vendor: 0x1106
> > ivtv: i2c client addr: 0x50 not found!
> > ivtv: Error -19 reading Hauppauge eeprom.
> > ivtv: Possible causes: the tveeprom module was not loaded, or
> > ivtv: the eeprom kernel module was loaded before the tveeprom module.
> > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
> > ivtv: i2c attach [client=(tuner unset),ok]
> > saa7115: Ignoring new-style parameters in presence of obsolete ones
> > saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
> > saa7115: detecting saa7115 client on address 0x42
> > saa7115: writing init values
> > ivtv: i2c attach [client=saa7115[0],ok]
> > saa7115: status: (1E) 0x48, (1F) 0xc0
> > msp3400: Unknown parameter `simple'
> > msp34xx: init: chip=MSP3448W-A2 +nicam +simple +simpler +radio mode=simple
> > ivtv: i2c attach [client=MSP3448W-A2,ok]
> > msp3410: daemon started
> > ivtv: Encoder revision: 0x02040024
> > ivtv: Configuring WinTV PVR 250 card with 4 streams
> > ivtv: Create DMA stream 0 using 128 buffers of size 32768
> > ivtv: Create DMA stream 1 using 128 buffers of size 32768
> > ivtv: Create stream 2 using 128 buffers of size 52224
> > ivtv: Create DMA stream 3 using 128 buffers of size 32768
> > ivtv: Could not detect tuner standard, defaulting to NTSC.
> > ivtv: Setting audio matrix to input 3, output 1
> > ivtv: Switching standard to NTSC.
> > tuner: tuner type not set
> > saa7115: decoder set norm NTSC
> > saa7115: set audio: 0x01
> > ivtv: Initialized WinTV PVR 250, card #0
> > ivtv: ==================== END INIT IVTV ====================
> >
> > thanks,
> > --james
> >
> > -------------------------------------------------------
> > This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
> > Tool for open source databases. Create drag-&-drop reports. Save time
> > by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
> > Download a FREE copy at http://www.intelliview.com/go/osdn_nl
> > _______________________________________________
> > ivtv-devel mailing list
> > ivtv-devel[at]lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/ivtv-devel
> >
>
> -------------------------------------------------------
> This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
> Tool for open source databases. Create drag-&-drop reports. Save time
> by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
> Download a FREE copy at http://www.intelliview.com/go/osdn_nl
> _______________________________________________
> ivtv-devel mailing list
> ivtv-devel[at]lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/ivtv-devel
>
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
ivtv-devel mailing list
ivtv-devel[at]lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
|
