Mailing List Archive: ivtv: devel

[XDRIVER] v0.8 pre-compiled driver

Index | Next | Previous | View Threaded

john.p.harvey at btinternet

Jan 5, 2005, 2:33 PM

Post #1 of 9 (2230 views)
Permalink

[XDRIVER] v0.8 pre-compiled driver

Attached is a pre-compiled version of the v0.8 driver. (See previous mail
for description of fix)

John

Attachments:

ivtvdev_drv.o.gz (7.38 KB)

TheNop at gmx

Jan 8, 2005, 3:41 PM

Post #2 of 9 (2155 views)
Permalink

Re: [XDRIVER] v0.8 pre-compiled driver [In reply to]

Hi,

I want to try the v0.8 Xorg driver, but I get Xorg not configurated.
I followed the description below.
http://www.schaefer.dhcp.biz/pvr350tvout.htm

This is a snap from the Xorg.1.log

(II) Loading /usr/X11R6/lib/modules/drivers/ivtvdev_drv.o
(II) Module ivtv: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.8.0
ABI class: XFree86 Video Driver, version 0.6
(II) IVTVDEV: driver for framebuffer: PVR-350
(II) Primary Device is: PCI 01:00:0
(--) Chipset PVR-350 found
(EE) ivtvHWProvbe failed to do IVTVFB_IOCTL_GET_STATE for device (null)
(EE) Screen 0 deleted because of no matching config section.
(II) UnloadModule: "ivtvdev"
(EE) Device(s) detected, but none match those in the config file.

What can I do to solve the problem?

Beste regards
TheNop

John Harvey wrote:

>Attached is a pre-compiled version of the v0.8 driver. (See previous mail
>for description of fix)
>
>John
>
>

-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
ivtv-devel mailing list
ivtv-devel [at] lists
https://lists.sourceforge.net/lists/listinfo/ivtv-devel

john.p.harvey at btinternet

Jan 8, 2005, 4:44 PM

Post #3 of 9 (2169 views)
Permalink

RE: [XDRIVER] v0.8 pre-compiled driver [In reply to]

Post your xorg.conf and the xorg log file & I'll take a look.

JOhn

> -----Original Message-----
> From: ivtv-devel-admin [at] lists [mailto:ivtv-devel-
> admin [at] lists] On Behalf Of TheNop
> Sent: 08 January 2005 22:41
> To: ivtv-devel [at] lists
> Subject: Re: [ivtv-devel] [XDRIVER] v0.8 pre-compiled driver
>
> Hi,
>
> I want to try the v0.8 Xorg driver, but I get Xorg not configurated.
> I followed the description below.
> http://www.schaefer.dhcp.biz/pvr350tvout.htm
>
> This is a snap from the Xorg.1.log
>
> (II) Loading /usr/X11R6/lib/modules/drivers/ivtvdev_drv.o
> (II) Module ivtv: vendor="The XFree86 Project"
> compiled for 4.3.0, module version = 0.8.0
> ABI class: XFree86 Video Driver, version 0.6
> (II) IVTVDEV: driver for framebuffer: PVR-350
> (II) Primary Device is: PCI 01:00:0
> (--) Chipset PVR-350 found
> (EE) ivtvHWProvbe failed to do IVTVFB_IOCTL_GET_STATE for device (null)
> (EE) Screen 0 deleted because of no matching config section.
> (II) UnloadModule: "ivtvdev"
> (EE) Device(s) detected, but none match those in the config file.
>
> What can I do to solve the problem?
>
> Beste regards
> TheNop
>
>
>
>
>
> John Harvey wrote:
>
> >Attached is a pre-compiled version of the v0.8 driver. (See previous mail
> >for description of fix)
> >
> >John
> >
> >
>
>
>
> -------------------------------------------------------
> The SF.Net email is sponsored by: Beat the post-holiday blues
> Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
> It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
> _______________________________________________
> ivtv-devel mailing list
> ivtv-devel [at] lists
> https://lists.sourceforge.net/lists/listinfo/ivtv-devel

-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
ivtv-devel mailing list
ivtv-devel [at] lists
https://lists.sourceforge.net/lists/listinfo/ivtv-devel

TheNop at gmx

Jan 9, 2005, 4:37 AM

Post #4 of 9 (2160 views)
Permalink

Re: [XDRIVER] v0.8 pre-compiled driver [In reply to]

Hi John,

here are the files, you ask for.
I have ivtv 0.2.0-rc1a installed. Is that the correct one?

John Harvey wrote:

>Post your xorg.conf and the xorg log file & I'll take a look.
>
>JOhn
>
>
>
>>-----Original Message-----
>>From: ivtv-devel-admin [at] lists [mailto:ivtv-devel-
>>admin [at] lists] On Behalf Of TheNop
>>Sent: 08 January 2005 22:41
>>To: ivtv-devel [at] lists
>>Subject: Re: [ivtv-devel] [XDRIVER] v0.8 pre-compiled driver
>>
>>Hi,
>>
>>I want to try the v0.8 Xorg driver, but I get Xorg not configurated.
>>I followed the description below.
>>http://www.schaefer.dhcp.biz/pvr350tvout.htm
>>
>>This is a snap from the Xorg.1.log
>>
>>(II) Loading /usr/X11R6/lib/modules/drivers/ivtvdev_drv.o
>>(II) Module ivtv: vendor="The XFree86 Project"
>> compiled for 4.3.0, module version = 0.8.0
>> ABI class: XFree86 Video Driver, version 0.6
>>(II) IVTVDEV: driver for framebuffer: PVR-350
>>(II) Primary Device is: PCI 01:00:0
>>(--) Chipset PVR-350 found
>>(EE) ivtvHWProvbe failed to do IVTVFB_IOCTL_GET_STATE for device (null)
>>(EE) Screen 0 deleted because of no matching config section.
>>(II) UnloadModule: "ivtvdev"
>>(EE) Device(s) detected, but none match those in the config file.
>>
>>What can I do to solve the problem?
>>
>>Beste regards
>>TheNop
>>
>>
>>
>>
>>
>>John Harvey wrote:
>>
>>
>>
>>>Attached is a pre-compiled version of the v0.8 driver. (See previous mail
>>>for description of fix)
>>>
>>>John
>>>
>>>
>>>
>>>
>>
>>-------------------------------------------------------
>>The SF.Net email is sponsored by: Beat the post-holiday blues
>>Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
>>It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
>>_______________________________________________
>>ivtv-devel mailing list
>>ivtv-devel [at] lists
>>https://lists.sourceforge.net/lists/listinfo/ivtv-devel
>>
>>
>
>
>
>-------------------------------------------------------
>The SF.Net email is sponsored by: Beat the post-holiday blues
>Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
>It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
>_______________________________________________
>ivtv-devel mailing list
>ivtv-devel [at] lists
>https://lists.sourceforge.net/lists/listinfo/ivtv-devel
>
>
>
>

Attachments:

xorg-log-config.tar.bz2 (7.48 KB)

TheNop at gmx

Jan 10, 2005, 4:16 PM

Post #5 of 9 (2169 views)
Permalink

Re: [XDRIVER] v0.8 pre-compiled driver [In reply to]

Hello,

I disabled matroxfb for my G400 card. Then the ivtvdev driver for X
works correclty.

Best regards
TheNop

TheNop wrote:

> Hi John,
>
> here are the files, you ask for.
> I have ivtv 0.2.0-rc1a installed. Is that the correct one?
>
>
> John Harvey wrote:
>
>> Post your xorg.conf and the xorg log file & I'll take a look.
>>
>> JOhn
>>
>>
>>
>>> -----Original Message-----
>>> From: ivtv-devel-admin [at] lists [mailto:ivtv-devel-
>>> admin [at] lists] On Behalf Of TheNop
>>> Sent: 08 January 2005 22:41
>>> To: ivtv-devel [at] lists
>>> Subject: Re: [ivtv-devel] [XDRIVER] v0.8 pre-compiled driver
>>>
>>> Hi,
>>>
>>> I want to try the v0.8 Xorg driver, but I get Xorg not configurated.
>>> I followed the description below.
>>> http://www.schaefer.dhcp.biz/pvr350tvout.htm
>>>
>>> This is a snap from the Xorg.1.log
>>>
>>> (II) Loading /usr/X11R6/lib/modules/drivers/ivtvdev_drv.o
>>> (II) Module ivtv: vendor="The XFree86 Project"
>>> compiled for 4.3.0, module version = 0.8.0
>>> ABI class: XFree86 Video Driver, version 0.6
>>> (II) IVTVDEV: driver for framebuffer: PVR-350
>>> (II) Primary Device is: PCI 01:00:0
>>> (--) Chipset PVR-350 found
>>> (EE) ivtvHWProvbe failed to do IVTVFB_IOCTL_GET_STATE for device (null)
>>> (EE) Screen 0 deleted because of no matching config section.
>>> (II) UnloadModule: "ivtvdev"
>>> (EE) Device(s) detected, but none match those in the config file.
>>>
>>> What can I do to solve the problem?
>>>
>>> Beste regards
>>> TheNop
>>>
>>>
>>>
>>>
>>>
>>> John Harvey wrote:
>>>
>>>
>>>
>>>> Attached is a pre-compiled version of the v0.8 driver. (See
>>>> previous mail
>>>> for description of fix)
>>>>
>>>> John
>>>>
>>>>
>>>>
>>>
>>>
>>> -------------------------------------------------------
>>> The SF.Net email is sponsored by: Beat the post-holiday blues
>>> Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
>>> It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
>>> _______________________________________________
>>> ivtv-devel mailing list
>>> ivtv-devel [at] lists
>>> https://lists.sourceforge.net/lists/listinfo/ivtv-devel
>>>
>>
>>
>>
>>
>> -------------------------------------------------------
>> The SF.Net email is sponsored by: Beat the post-holiday blues
>> Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
>> It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
>> _______________________________________________
>> ivtv-devel mailing list
>> ivtv-devel [at] lists
>> https://lists.sourceforge.net/lists/listinfo/ivtv-devel
>>
>>
>>
>>
>

-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
ivtv-devel mailing list
ivtv-devel [at] lists
https://lists.sourceforge.net/lists/listinfo/ivtv-devel

oliver.gorwits at computing-services

Jan 10, 2005, 4:38 PM

Post #6 of 9 (2157 views)
Permalink

Re: [XDRIVER] v0.8 pre-compiled driver [In reply to]

On Wed, 5 Jan 2005 21:33:48 -0000
"John Harvey" <john.p.harvey [at] btinternet> wrote:

> Attached is a pre-compiled version of the v0.8 driver. (See previous mail
> for description of fix)

Hi John,

Please could you just confirm whether you have had v0.8 of your driver working with /dev/fb1 ?

Anyway, many thanks for the work you've done on this.

regards,
oliver.

-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
ivtv-devel mailing list
ivtv-devel [at] lists
https://lists.sourceforge.net/lists/listinfo/ivtv-devel

fenn at stanford

Jan 10, 2005, 6:02 PM

Post #7 of 9 (2162 views)
Permalink

Re: [XDRIVER] v0.8 pre-compiled driver [In reply to]

On Mon, Jan 10, 2005 at 11:38:58PM +0000, Oliver Gorwits wrote:
> On Wed, 5 Jan 2005 21:33:48 -0000
> "John Harvey" <john.p.harvey [at] btinternet> wrote:
>
> > Attached is a pre-compiled version of the v0.8 driver. (See previous mail
> > for description of fix)
>
> Hi John,
>
> Please could you just confirm whether you have had v0.8 of your
> driver working with /dev/fb1 ?
>

I've been using version 0.8 with /dev/fb1 - seems to work great (I
still get the infamous "ivtv: OSD: DMA xfer from 0xf6e01008 of 851968
bytes failed with (-512)..." messages, but they seem to be harmless)
using ivtv 0.3.2a.

Regards,
Tim

--
Morals? I eat communism and $h!t America, brother. --Seanbaby

-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
ivtv-devel mailing list
ivtv-devel [at] lists
https://lists.sourceforge.net/lists/listinfo/ivtv-devel

john.p.harvey at btinternet

Jan 11, 2005, 12:49 AM

Post #8 of 9 (2152 views)
Permalink

RE: [XDRIVER] v0.8 pre-compiled driver [In reply to]

I don't have one but I just renamed my /dev/fb0 to /dev/fb1. V0.7 failed to
start and 0.8 worked with just an
option fbdev "/dev/fb1"

John

> -----Original Message-----
> From: ivtv-devel-admin [at] lists [mailto:ivtv-devel-
> admin [at] lists] On Behalf Of Oliver Gorwits
> Sent: 10 January 2005 23:39
> To: ivtv-devel [at] lists
> Subject: Re: [ivtv-devel] [XDRIVER] v0.8 pre-compiled driver
>
> On Wed, 5 Jan 2005 21:33:48 -0000
> "John Harvey" <john.p.harvey [at] btinternet> wrote:
>
> > Attached is a pre-compiled version of the v0.8 driver. (See previous
> mail
> > for description of fix)
>
> Hi John,
>
> Please could you just confirm whether you have had v0.8 of your driver
> working with /dev/fb1 ?
>
> Anyway, many thanks for the work you've done on this.
>
> regards,
> oliver.
>
>
> -------------------------------------------------------
> The SF.Net email is sponsored by: Beat the post-holiday blues
> Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
> It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
> _______________________________________________
> ivtv-devel mailing list
> ivtv-devel [at] lists
> https://lists.sourceforge.net/lists/listinfo/ivtv-devel

-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
ivtv-devel mailing list
ivtv-devel [at] lists
https://lists.sourceforge.net/lists/listinfo/ivtv-devel

john.p.harvey at btinternet

Jan 11, 2005, 12:51 AM

Post #9 of 9 (2168 views)
Permalink

RE: [XDRIVER] v0.8 pre-compiled driver [In reply to]

> -----Original Message-----
> From: ivtv-devel-admin [at] lists [mailto:ivtv-devel-
> admin [at] lists] On Behalf Of Tim Fenn
> Sent: 11 January 2005 01:03
> To: ivtv-devel [at] lists
> Subject: Re: [ivtv-devel] [XDRIVER] v0.8 pre-compiled driver
>
> On Mon, Jan 10, 2005 at 11:38:58PM +0000, Oliver Gorwits wrote:
> > On Wed, 5 Jan 2005 21:33:48 -0000
> > "John Harvey" <john.p.harvey [at] btinternet> wrote:
> >
> > > Attached is a pre-compiled version of the v0.8 driver. (See previous
> mail
> > > for description of fix)
> >
> > Hi John,
> >
> > Please could you just confirm whether you have had v0.8 of your
> > driver working with /dev/fb1 ?
> >
>
> I've been using version 0.8 with /dev/fb1 - seems to work great (I
> still get the infamous "ivtv: OSD: DMA xfer from 0xf6e01008 of 851968
> bytes failed with (-512)..." messages, but they seem to be harmless)
> using ivtv 0.3.2a.
>
> Regards,
> Tim

Those messages are harmless ( see my post a few weeks ago) and have been
removed from the latest driver.

John

-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
ivtv-devel mailing list
ivtv-devel [at] lists
https://lists.sourceforge.net/lists/listinfo/ivtv-devel

Index | Next | Previous | View Threaded

Interested in having your list archived? Contact Gossamer Threads