Mailing List Archive by Gossamer Threads http://www.gossamer-threads.com/lists/ivtv/devel/ en-us (c) Gossamer Threads Inc. All rights reserved. 24 Nov 2009 21:07:58 -0800 120 75 23 http://www.gossamer-threads.com/lists/ivtv/devel/ http://www.gossamer-threads.com/images/lists/rss_logo.jpg On Mon, 2009-11-23 at 17:32 +0000, Paulus, Mark G wrote: > By changing CONFIG_FIREDTV from =m to =n, I was able to get > the new cx18 modules to bui 24 Nov 2009 17:07:18 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40517 On Mon, 2009-11-23 at 19:55 +0300, Rajesh Padalia wrote: > Andy, > 0x0180 and 0x00c0 enables the LED on board, however I could not hear > audio for an 24 Nov 2009 16:46:31 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40516 On Tue, 2009-11-24 at 12:57 -0500, Devin Heitmueller wrote: > On Mon, Nov 23, 2009 at 8:49 PM, Andy Walls <awalls@radix.net> wrote: > > Of course that 24 Nov 2009 15:39:33 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40515 On Mon, Nov 23, 2009 at 8:49 PM, Andy Walls <awalls@radix.net> wrote: > Of course that's all speculation about the problem.  If you could > reproduce 24 Nov 2009 09:57:03 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40514 On Mon, 2009-11-23 at 12:09 -0500, Devin Heitmueller wrote: > On Mon, Nov 23, 2009 at 7:12 AM, Andy Walls <awalls@radix.net> wrote: > > 5. If you don' 23 Nov 2009 17:49:06 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40509 On Mon, Nov 23, 2009 at 12:32 PM, Paulus, Mark G <mark.paulus@verizonbusiness.com> wrote: > By changing CONFIG_FIREDTV from =m to =n, I was able to ge 23 Nov 2009 10:47:42 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40507 > -----Original Message----- > From: ivtv-devel-bounces@ivtvdriver.org [.mailto:ivtv-devel- > bounces@ivtvdriver.org] On Behalf Of Devin Heitmueller > 23 Nov 2009 09:32:01 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40506 On Mon, Nov 23, 2009 at 7:12 AM, Andy Walls <awalls@radix.net> wrote: > 5. If you don't give an MDL back to the firmware, it never uses it > again.  T 23 Nov 2009 09:09:22 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40505 Andy, 0x0180 and 0x00c0 enables the LED on board, however I could not hear audio for any of the bits. Thanks and regards, Rajesh On Sat, Nov 21, 2009 23 Nov 2009 08:55:08 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40504 On Mon, 2009-11-23 at 07:12 -0500, Andy Walls wrote: > On Sun, 2009-11-22 at 22:04 -0500, Devin Heitmueller wrote: > > On Tue, Nov 10, 2009 at 11:31 P 23 Nov 2009 04:32:47 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40503 On Sun, 2009-11-22 at 22:04 -0500, Devin Heitmueller wrote: > On Tue, Nov 10, 2009 at 11:31 PM, Andy Walls <awalls@radix.net> wrote: > > OK, here's my 23 Nov 2009 04:12:50 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40502 On Tue, Nov 10, 2009 at 11:31 PM, Andy Walls <awalls@radix.net> wrote: > OK, here's my second attempt at getting rid of cx18 YUV frame alignment > and 22 Nov 2009 19:04:06 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40501 On Sun, 2009-11-15 at 14:57 +0100, Hans Verkuil wrote: > On Monday 19 October 2009 15:20:34 Alexander Voropay wrote: > > I've got a Sony TV card extra 21 Nov 2009 20:10:07 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40499 Mauro, Please pull from http://linuxtv.org/hg/~awalls/v4l-dvb-misc for the following 7 changesets: 01/07: ivtv: Update the cards definitions to add 21 Nov 2009 14:26:45 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40498 On Sat, 2009-11-21 at 18:53 +0300, Rajesh Padalia wrote: > Andy, > I am back and have started testing. > Some of clarifications: > 1. I am trying diff 21 Nov 2009 12:56:36 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40497 On Sun, 2009-10-11 at 04:01 +0300, Aleksandr V. Piskunov wrote: > On Tue, Oct 06, 2009 at 11:11:59AM +0300, Aleksandr V. Piskunov wrote: > > On Tue, O 20 Nov 2009 19:39:27 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40496 On Thu, Nov 19, 2009 at 8:44 AM, Paulus, Mark G <mark.paulus@verizonbusiness.com> wrote: > Andy, > > I have built this fine on my Debian Lenny box wit 19 Nov 2009 06:29:57 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40481 > -----Original Message----- > From: ivtv-devel-bounces@ivtvdriver.org [.mailto:ivtv-devel- > bounces@ivtvdriver.org] On Behalf Of Paulus, Mark G > Se 19 Nov 2009 05:54:35 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40479 > -----Original Message----- > From: ivtv-devel-bounces@ivtvdriver.org [.mailto:ivtv-devel- > bounces@ivtvdriver.org] On Behalf Of Andy Walls > Sent: 19 Nov 2009 05:44:15 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40478 Hi. I sold my 2xPvr-350 and 2xPvr-150 a couple of month ago, before that i didn't use them for about a year. Before i unsubscribe i just wanted to s 15 Nov 2009 07:18:59 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40469 On Sun, 2009-11-15 at 14:57 +0100, Hans Verkuil wrote: > > I've also CC-ed Andy Walls since I have no idea whether I will have the time > to work mo 15 Nov 2009 06:23:36 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40468 On Monday 19 October 2009 15:20:34 Alexander Voropay wrote: > I've got a Sony TV card extracted from the unknown (Sony?) brandname computer. > Unfortu 15 Nov 2009 05:57:20 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40467 Hi all, Since the older 1.1.0 driver no longer compiled with the latest Xorg, Ian and Nicolas provided me with a patch that fixed this. So I made a 15 Nov 2009 02:25:48 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40465 On Thu, 2009-10-08 at 19:59 +0500, Hiemanshu Sharma wrote: > Hello, > > I have an AverMedia Ultra 116 TV(M103) Card that uses ivtv module > (Auto det 13 Nov 2009 12:59:56 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40464 Andy, That's great stuff. I am excited to try all what you have advised. I will be trying it out in few days time. I am going to Singapore for 4 days 13 Nov 2009 12:33:19 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40463 On Thu, 2009-11-12 at 20:34 +0300, Rajesh Padalia wrote: > Hi Andy, > 1. $ v4l2-ctl --log-status: > Status Log: > > ivtv0: ================= STA 13 Nov 2009 11:32:33 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40462 Andy, More updates: Using TV Tuner input I could get audio in some channel, however no video using TV Tuner. Thanks and best regards, Rajesh On Thu, 12 Nov 2009 11:07:35 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40461 Hi Andy, I could resolve issue of óut of sync' by setting video standard to PAL Thanks... Rajesh On Thu, Nov 12, 2009 at 8:34 PM, Rajesh Padalia <raj 12 Nov 2009 10:04:18 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40460 Hi Andy, 1. $ v4l2-ctl --log-status: Status Log: ivtv0: ================= START STATUS CARD #0 ================= ivtv0: Version: 1.4.1 Card: 12 Nov 2009 09:34:49 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40457 Hi John, > Hi all, > > I will be on vacation to Cozumel Mexico from this Friday evening till > some the 23rd of November. I may check in 1 or 2 even 12 Nov 2009 08:27:51 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40456 Hi all, I will be on vacation to Cozumel Mexico from this Friday evening till some the 23rd of November. I may check in 1 or 2 evenings but I will b 12 Nov 2009 07:28:52 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40454 --- On Wed, 11/11/09, Andy Walls <awalls@radix.net> wrote: > From: Andy Walls <awalls@radix.net> > Subject: Re: [ivtv-devel] ARCH Linux, xorg-server 12 Nov 2009 00:40:42 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40453 On Wed, Nov 11, 2009 at 8:06 PM, Andy Walls <awalls@radix.net> wrote: > On Wed, 2009-11-11 at 19:38 -0500, Brandon Jenkins wrote: >> On Tue, Nov 10, 2 11 Nov 2009 17:23:56 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40452 On Wed, 2009-11-11 at 19:38 -0500, Brandon Jenkins wrote: > On Tue, Nov 10, 2009 at 11:31 PM, Andy Walls <awalls@radix.net> wrote: > > > > Could folks 11 Nov 2009 17:06:46 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40451 On Tue, Nov 10, 2009 at 11:31 PM, Andy Walls <awalls@radix.net> wrote: > > Could folks give this cx18 code a test to make sure their primary use > cas 11 Nov 2009 16:38:38 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40450 On Wed, 2009-11-11 at 19:55 +0300, Rajesh Padalia wrote: > Hi Andy, > It works! I was able to capture video. I am yet to get Audio. Any idea? > ------ 11 Nov 2009 15:18:24 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40449 On Wednesday 11 November 2009, Andy Walls wrote: > On Wed, 2009-11-11 at 18:36 +0100, Andreas Baumann wrote: > > Hi, > > > > > > Reposting here from ' 11 Nov 2009 14:13:40 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40448 On Wed, 2009-11-11 at 18:36 +0100, Andreas Baumann wrote: > Hi, > > > Reposting here from 'ivtv-users' (realizing that this is maybe the better > pl 11 Nov 2009 13:08:18 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40447 Hi, Reposting here from 'ivtv-users' (realizing that this is maybe the better place): As ARCH Linux is always bleeding edge things tend to break 11 Nov 2009 09:36:40 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40446 Hi Andy, It works! I was able to capture video. I am yet to get Audio. Any idea? ------------------------------- Output of 'v4l2-ctl --all' : Driver 11 Nov 2009 08:55:13 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40445 OK, here's my second attempt at getting rid of cx18 YUV frame alignment and tearing issues. http://linuxtv.org/hg/~awalls/cx18-yuv2 This cha 10 Nov 2009 20:31:45 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40441 On Tue, 2009-11-10 at 15:50 +0300, Rajesh Padalia wrote: > Andy, > I got message when I did modprobe ivtv card=7 tuner=57: > "FATAL: Error inserting i 10 Nov 2009 15:43:31 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40440 Andy, I got message when I did modprobe ivtv card=7 tuner=57: "FATAL: Error inserting ivtv (/lib/modules/2.6.31.5-117.fc12.x86_64/kernel/drivers/media 10 Nov 2009 04:50:22 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40438 On Mon, 2009-11-09 at 20:12 +0300, Rajesh Padalia wrote: > Hans, > Attached are pictures of the card. I can see there are three chips on the card > 1. 09 Nov 2009 16:25:02 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40437 On Mon, 2009-11-09 at 11:23 +0100, Hans Verkuil wrote: > On Saturday 07 November 2009 13:46:30 Rajesh Padalia wrote: > > Nov 7 15:18:11 localhost ker 09 Nov 2009 03:34:56 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40431 On Saturday 07 November 2009 13:46:30 Rajesh Padalia wrote: > Nov 7 15:18:11 localhost kernel: ivtv: Start initialization, version 1.4.1 > Nov 7 15: 09 Nov 2009 02:23:24 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40430 Nov 7 15:18:11 localhost kernel: ivtv: Start initialization, version 1.4.1 Nov 7 15:18:11 localhost kernel: ivtv0: Initializing card 0 Nov 7 15:18: 07 Nov 2009 04:46:30 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40427 On Tue, 2009-11-03 at 12:06 -0500, Brandon Jenkins wrote: > On Sun, Nov 1, 2009 at 6:15 PM, Andy Walls <awalls@radix.net> wrote: > > On Sun, 2009-11-0 03 Nov 2009 18:52:25 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40413 On Sun, Nov 1, 2009 at 6:15 PM, Andy Walls <awalls@radix.net> wrote: > On Sun, 2009-11-01 at 17:59 -0500, Andy Walls wrote: >> On Sun, 2009-11-01 at 1 03 Nov 2009 09:06:58 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40410 On Wed, Sep 16, 2009 at 12:27 PM, Noah Beck <noah.b.beck@gmail.com> wrote: > On Tue, Sep 15, 2009 at 10:54:28PM -0400, Andy Walls wrote: >> On Tue, 20 02 Nov 2009 05:16:46 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40408 On Sun, 2009-11-01 at 17:59 -0500, Andy Walls wrote: > On Sun, 2009-11-01 at 13:10 -0500, Brandon Jenkins wrote: > > Hi Andy, > > > > The panic happe 01 Nov 2009 15:15:59 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40405 On Sun, 2009-11-01 at 13:10 -0500, Brandon Jenkins wrote: > On Sun, Nov 1, 2009 at 7:37 AM, Andy Walls <awalls@radix.net> wrote: > > On Sat, 2009-10-3 01 Nov 2009 14:59:14 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40404 On Sun, Nov 1, 2009 at 7:37 AM, Andy Walls <awalls@radix.net> wrote: > On Sat, 2009-10-31 at 22:25 -0400, Brandon Jenkins wrote: >> On Sat, Oct 31, 20 01 Nov 2009 10:10:30 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40401 On Sat, 2009-10-31 at 22:25 -0400, Brandon Jenkins wrote: > On Sat, Oct 31, 2009 at 8:41 PM, Andy Walls <awalls@radix.net> wrote: > > On Sat, 2009-10- 01 Nov 2009 04:37:35 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40400 On Sat, Oct 31, 2009 at 8:41 PM, Andy Walls <awalls@radix.net> wrote: > On Sat, 2009-10-31 at 16:28 -0400, Devin Heitmueller wrote: >> On Sat, Oct 31, 31 Oct 2009 19:25:12 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40397 On Sat, 2009-10-31 at 16:28 -0400, Devin Heitmueller wrote: > On Sat, Oct 31, 2009 at 4:16 PM, Andy Walls <awalls@radix.net> wrote: > > Hi Andy, > 31 Oct 2009 17:41:34 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40393 On Sat, 2009-10-31 at 16:28 -0400, Devin Heitmueller wrote: > On Sat, Oct 31, 2009 at 4:16 PM, Andy Walls <awalls@radix.net> wrote: > > All, > > > > A 31 Oct 2009 17:38:30 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40392 On Sat, Oct 31, 2009 at 4:16 PM, Andy Walls <awalls@radix.net> wrote: > All, > > At > > http://linuxtv.org/hg/~awalls/cx18-yuv > > I have checked in s 31 Oct 2009 13:28:00 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40385 All, At http://linuxtv.org/hg/~awalls/cx18-yuv I have checked in some improvements to YUV handling in the cx18 driver. There was a problem in th 31 Oct 2009 13:16:44 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40384 Hi Andy, On Thu, Oct 29, 2009 at 7:45 PM, Andy Walls <awalls@radix.net> wrote: > Please test for Devin if you can.  I've reviewed the changes and the 30 Oct 2009 12:49:05 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40382 On Thu, 2009-10-29 at 10:28 -0400, Devin Heitmueller wrote: > Hello all, > > If you are an HVR-1600 user who has noticed the ClearQAM tuning > perfor 29 Oct 2009 16:45:35 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40379 I've got a Sony TV card extracted from the unknown (Sony?) brandname computer. Unfortunately, "ivtv" driver can't recognize it and aviced me to post I 19 Oct 2009 06:20:34 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40371 All, I'll be somewhat busy on non-linux things for the next 2-3 weeks as I support my wife in getting her corporation off the ground. (I'm already l 13 Oct 2009 16:05:58 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40366 Hi Hans, On Sunday 11 October 2009 18:02:42 Hans Verkuil wrote: > Hi all, > > You may have noticed very little activity from me lately: this is due 11 Oct 2009 15:30:56 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40363 Hi all, You may have noticed very little activity from me lately: this is due to a lot of traveling and a very busy work schedule. This will continu 11 Oct 2009 09:02:42 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40361 On Sun, 2009-10-11 at 04:01 +0300, Aleksandr V. Piskunov wrote: > On Tue, Oct 06, 2009 at 11:11:59AM +0300, Aleksandr V. Piskunov wrote: > > On Tue, O 11 Oct 2009 05:05:35 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40359 On Tue, Oct 06, 2009 at 11:11:59AM +0300, Aleksandr V. Piskunov wrote: > On Tue, Oct 06, 2009 at 11:04:06AM +0300, Aleksandr V. Piskunov wrote: > > Ad 10 Oct 2009 18:01:12 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40358 On Tue, 29 Sep 2009, Peter Huewe wrote: > From: Peter Huewe <peterhuewe@gmx.de> > > Trivial patch which adds the __init/__exit macros to the module_ 09 Oct 2009 08:21:53 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40353 Hello, I have an AverMedia Ultra 116 TV(M103) Card that uses ivtv module (Auto detect by Fedora) I am not able to get any display on it. Its not an h 08 Oct 2009 07:59:09 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40352 On 9/30/09 9:26 AM, Karicheri, Muralidharan wrote: drivers/media/video/saa7164/saa7164-core.c drivers/media/video/cx23885/cx23885-core.c Acked-By: 30 Sep 2009 12:30:46 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40345 Hi All, The administration connection to mailman server has been down (or at least I can not connect to it) for a day so that if anyone sends mail to 30 Sep 2009 06:33:26 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40341 For drivers/media/video/davinci/dm355_ccdc.c and drivers/media/video/davinci/dm644x_ccdc.c, Acked-by: Muralidharan Karicheri <m-karicheri2@ti.com> Mu 30 Sep 2009 06:26:15 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40348 On Monday 21 September 2009, Martin Dauskardt wrote: > I just discovered the following module options: > > modinfo ivtv: > > parm: ivtv_yuv_ 30 Sep 2009 04:01:19 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40340 On Tuesday 29 September 2009 02:19:00 Peter Huewe wrote: > From: Peter Huewe <peterhuewe@gmx.de> > > Trivial patch which adds the __init/__exit macro 30 Sep 2009 01:02:35 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40347 On Tue, 2009-09-29 at 02:19 +0200, Peter Huewe wrote: > From: Peter Huewe <peterhuewe@gmx.de> > > Trivial patch which adds the __init/__exit macros t 29 Sep 2009 18:05:45 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40346 From: Peter Huewe <peterhuewe@gmx.de> Trivial patch which adds the __init/__exit macros to the module_init/ module_exit functions of the following dr 28 Sep 2009 17:19:00 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40337 I just discovered the following module options: modinfo ivtv: parm: ivtv_yuv_mode:Specify the yuv playback mode: 0 21 Sep 2009 13:38:26 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40329 Hi Andy, the problem is solved since I improved the dummy black video frames. Now they have the PTS from the audio packets. It is no longer necessar 21 Sep 2009 04:59:45 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40328 On Sun, 2009-09-20 at 20:50 +0200, Martin Dauskardt wrote: > Hi Andy, > > > > > I'll have to look into this more. If you turn on the info and mailb 20 Sep 2009 13:40:28 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40327 Hi Andy, > > I'll have to look into this more. If you turn on the info and mailbox > flags with the debug module option to ivtv, then speed setting 20 Sep 2009 11:50:13 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40326 On 9/20/09, Andy Walls <awalls@radix.net> wrote: > On Sun, 2009-09-20 at 00:41 +0200, Martin Dauskardt wrote: >> I finally I found a solution for my v 19 Sep 2009 22:09:29 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40325 On Sun, 2009-09-20 at 00:41 +0200, Martin Dauskardt wrote: > I finally I found a solution for my vdr pvr350-plugin to play DVB radio > streams which 19 Sep 2009 20:00:53 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40324 I finally I found a solution for my vdr pvr350-plugin to play DVB radio streams which have only audio, no video. For these streams I send a black vi 19 Sep 2009 15:41:43 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40323 On Tue, Sep 15, 2009 at 10:54:28PM -0400, Andy Walls wrote: > On Tue, 2009-09-15 at 14:27 +1200, Robin Gilks wrote: > > > Andy Walls wrote: > > > > > 16 Sep 2009 09:27:41 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40320 On Tue, 2009-09-15 at 14:27 +1200, Robin Gilks wrote: > > Andy Walls wrote: > > > Given the testing Chris has done with my patches, it looks like usi 15 Sep 2009 19:54:28 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40319 > Andy Walls wrote: > Given the testing Chris has done with my patches, it looks like using > CX23418 A/V core firmware with a CX25843 is returning n 14 Sep 2009 19:27:06 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40316 Hans, Andy Walls wrote: > Here are hashes for the firmwares I have in use on my system: > > $ md5sum /lib/firmware/v4l-cx25840.fw /lib/firmware/v4l- 14 Sep 2009 18:04:25 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40314 On Thu, 2009-09-10 at 07:23 -0500, Chris Kennedy wrote: > > Well you can stop until I fix the debug line to print the interrupt > > status to the log 10 Sep 2009 17:30:04 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40310 On Fri, 2009-09-04 at 10:15 -0400, Andy Walls wrote: > On Wed, 2009-09-02 at 23:25 -0500, Chris Kennedy wrote: > > > > > On Sun, Aug 30, 2009 at 4:30 09 Sep 2009 19:35:39 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40309 On Wed, 2009-09-02 at 23:25 -0500, Chris Kennedy wrote: > > > On Sun, Aug 30, 2009 at 4:30 AM, Andy Walls <awalls@radix.net> wrote: > > > > > >> On S 04 Sep 2009 07:15:48 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40303 On Wed, 2009-09-02 at 11:46 +0200, Sigmund Augdal wrote: > Hi, > > > > I'm throwing in my comments here as this discussion seems relevant for > my 03 Sep 2009 17:55:36 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40302 On Thu, 2009-09-03 at 15:48 -0500, Chris Kennedy wrote: > On Wed, Sep 02, 2009 at 01:43:28PM +0200, Sigmund Augdal wrote: > > On Wed, Sep 2, 2009 at 1 03 Sep 2009 16:07:27 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40301 On Wed, Sep 02, 2009 at 01:43:28PM +0200, Sigmund Augdal wrote: > On Wed, Sep 2, 2009 at 11:46 AM, Sigmund Augdal <sigmund@snap.tv> wrote: > > > Hi, 03 Sep 2009 13:48:10 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40300 On Wed, Sep 02, 2009 at 01:43:28PM +0200, Sigmund Augdal wrote: > On Wed, Sep 2, 2009 at 11:46 AM, Sigmund Augdal <sigmund@snap.tv> wrote: > > > Hi, 02 Sep 2009 21:25:53 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40299 On Wed, Sep 2, 2009 at 11:46 AM, Sigmund Augdal <sigmund@snap.tv> wrote: > Hi, > > I'm throwing in my comments here as this discussion seems relevant 02 Sep 2009 04:43:28 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40298 Hi, I'm throwing in my comments here as this discussion seems relevant for my problem. I too experience a tinny audio problem with my PVR-150 card. I 02 Sep 2009 02:46:14 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40297 On Sat, 2009-08-29 at 20:39 -0500, Chris Kennedy wrote: > I'm wondering too if it's signal dependent, could be something in the > signal triggers thi 29 Aug 2009 19:30:59 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40292 On Sat, Aug 29, 2009 at 05:14:49PM -0400, Andy Walls wrote: > On Sat, 2009-08-29 at 01:04 -0500, Chris Kennedy wrote: > > On Fri, Aug 28, 2009 at 09:0 29 Aug 2009 18:39:30 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40291 On Sat, 2009-08-29 at 01:04 -0500, Chris Kennedy wrote: > On Fri, Aug 28, 2009 at 09:00:58PM -0400, Andy Walls wrote: > > On Fri, 2009-08-28 at 16:49 29 Aug 2009 14:14:49 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40285 On Sat, Aug 29, 2009 at 09:04:48AM -0400, Andy Walls wrote: > On Sat, 2009-08-29 at 01:04 -0500, Chris Kennedy wrote: > > > And here it is after runn 29 Aug 2009 06:17:24 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40284