Mailing List Archive by Gossamer Threads http://www.gossamer-threads.com/lists/ivtv/devel/ en-us (c) Gossamer Threads Inc. All rights reserved. 26 Nov 2009 10:43:46 -0800 120 75 23 http://www.gossamer-threads.com/lists/ivtv/devel/ http://www.gossamer-threads.com/images/lists/rss_logo.jpg On Tue, Nov 24, 2009 at 6:39 PM, Andy Walls <awalls@radix.net> wrote: > BTW, I did a quick skim of your cx18-alsa stuff.  I noticed two things: > > 1. 25 Nov 2009 08:43:29 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40519 On Mon, 2009-11-23 at 17:32 +0000, Paulus, Mark G wrote: > By changing CONFIG_FIREDTV from =m to =n, I was able to get > the new cx18 modules to bui 24 Nov 2009 17:07:18 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40517 On Mon, 2009-11-23 at 19:55 +0300, Rajesh Padalia wrote: > Andy, > 0x0180 and 0x00c0 enables the LED on board, however I could not hear > audio for an 24 Nov 2009 16:46:31 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40516 On Tue, 2009-11-24 at 12:57 -0500, Devin Heitmueller wrote: > On Mon, Nov 23, 2009 at 8:49 PM, Andy Walls <awalls@radix.net> wrote: > > Of course that 24 Nov 2009 15:39:33 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40515 On Mon, Nov 23, 2009 at 8:49 PM, Andy Walls <awalls@radix.net> wrote: > Of course that's all speculation about the problem.  If you could > reproduce 24 Nov 2009 09:57:03 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40514 On Mon, 2009-11-23 at 12:09 -0500, Devin Heitmueller wrote: > On Mon, Nov 23, 2009 at 7:12 AM, Andy Walls <awalls@radix.net> wrote: > > 5. If you don' 23 Nov 2009 17:49:06 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40509 On Mon, Nov 23, 2009 at 12:32 PM, Paulus, Mark G <mark.paulus@verizonbusiness.com> wrote: > By changing CONFIG_FIREDTV from =m to =n, I was able to ge 23 Nov 2009 10:47:42 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40507 > -----Original Message----- > From: ivtv-devel-bounces@ivtvdriver.org [.mailto:ivtv-devel- > bounces@ivtvdriver.org] On Behalf Of Devin Heitmueller > 23 Nov 2009 09:32:01 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40506 On Mon, Nov 23, 2009 at 7:12 AM, Andy Walls <awalls@radix.net> wrote: > 5. If you don't give an MDL back to the firmware, it never uses it > again.  T 23 Nov 2009 09:09:22 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40505 Andy, 0x0180 and 0x00c0 enables the LED on board, however I could not hear audio for any of the bits. Thanks and regards, Rajesh On Sat, Nov 21, 2009 23 Nov 2009 08:55:08 -0800 http://www.gossamer-threads.com/lists/ivtv/devel/40504