michaelkintzios at gmail
Nov 29, 2010, 6:51 AM
Views: 3158
Permalink
|
|
Re: gentoo-sources-2.6.35-r12 causes kernel panic
[In reply to]
|
|
On 29 November 2010 13:41, Dale <rdalek1967 [at] gmail> wrote:
> Mick wrote:
>>
>> Ughh! Spoke too soon. :-(
>>
>> The older PIII machine still crashes in the same manner. This is what
>> I have configured:
>>
>> $ cat /usr/src/linux/.config | grep -i CONFIG_ATA
>> # CONFIG_ATALK is not set
>> # CONFIG_ATA_OVER_ETH is not set
>> CONFIG_ATA=y
>> # CONFIG_ATA_NONSTANDARD is not set
>> # CONFIG_ATA_VERBOSE_ERROR is not set
>> CONFIG_ATA_ACPI=y
>> CONFIG_ATA_SFF=y
>> CONFIG_ATA_BMDMA=y
>> CONFIG_ATA_PIIX=y
>> CONFIG_ATA_GENERIC=y
>>
>> Also,
>>
>> CONFIG_SATA_PMP=y
>>
>> CONFIG_PATA_ISAPNP=y
>>
>> CONFIG_PATA_ACPI=y
>> CONFIG_PATA_LEGACY=y
>>
>> This is what this old machine contains:
>>
>> # lspci
>> 00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev
>> 04)
>> 00:01.0 PCI bridge: Intel Corporation 82830 830 Chipset AGP Bridge (rev
>> 04)
>> ...
>> 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42)
>> 00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
>> 00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 Controller (rev
>> 02)
>>
>> I should be able to get onto the P4 later on and see if the problem
>> persists there too.
>>
>
> I'm not sure if this would help but it couldn't hurt to try.
>
> http://kmuto.jp/debian/hcl/
>
> Hope that helps.
Thanks Dale, I think it is based on older kernels. It mentions:
ata_piix
which is the ONFIG_ATA_PIIX=y I have configured in the kernel. For a
minute I thought it's something simple I missed out on with the change
of the kernel version, but it seems it is more involved than that. I
just hope that the P4 machine works out right, because it is on daily
use.
--
Regards,
Mick
|
