michaelkintzios at gmail
Nov 29, 2010, 4:52 AM
Views: 3187
Permalink
|
|
Re: gentoo-sources-2.6.35-r12 causes kernel panic
[In reply to]
|
|
On 29 November 2010 10:30, Mick <michaelkintzios [at] gmail> wrote:
> On Monday 29 November 2010 09:01:37 Neil Bothwick wrote:
>> On Mon, 29 Nov 2010 08:30:46 +0000, Mick wrote:
>> > $ cat /usr/src/linux/.config | grep -i CONFIG_ATA
>> > # CONFIG_ATALK is not set
>> > # CONFIG_ATA_OVER_ETH is not set
>> > CONFIG_ATA=y
>> > # CONFIG_ATA_NONSTANDARD is not set
>> > # CONFIG_ATA_VERBOSE_ERROR is not set
>> > CONFIG_ATA_ACPI=y
>> > # CONFIG_ATA_SFF is not set
>>
>> This one may be the cause, I've needed to set it on several machines to
>> avoid just what you're seeing.
>
> Aha!! I couldn't see it because I had not enabled "ATA BMDMA support" - it's
> compiling now.
>
> Thank you all for your help!
Ughh! Spoke too soon. :-(
The older PIII machine still crashes in the same manner. This is what
I have configured:
$ cat /usr/src/linux/.config | grep -i CONFIG_ATA
# CONFIG_ATALK is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_ATA_VERBOSE_ERROR is not set
CONFIG_ATA_ACPI=y
CONFIG_ATA_SFF=y
CONFIG_ATA_BMDMA=y
CONFIG_ATA_PIIX=y
CONFIG_ATA_GENERIC=y
Also,
CONFIG_SATA_PMP=y
CONFIG_PATA_ISAPNP=y
CONFIG_PATA_ACPI=y
CONFIG_PATA_LEGACY=y
This is what this old machine contains:
# lspci
00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev 04)
00:01.0 PCI bridge: Intel Corporation 82830 830 Chipset AGP Bridge (rev 04)
...
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 Controller (rev 02)
I should be able to get onto the P4 later on and see if the problem
persists there too.
--
Regards,
Mick
|
