brett at blzj
Apr 20, 2006, 2:59 PM
Post #1 of 2
(2605 views)
Permalink
|
|
Newbie problems booting gentoo on HP9000 819 K200
|
|
Greetings,
I recently acquired a HP9000 819 K200 server, and I am trying to get
gentoo loaded on it. The system does boot HP-UX off the original drives
so I know the system is in working order. When I try to boot gentoo,
the system seems to go into an infinite loop after it detects the
second MUX card. I have attached the log file of the boot process.
I did try to boot debian too, and that actually panics the
system. If it would be helpful, I can capture that boot process as well.
Firmware Version 2.0
Duplex Console IO Dependent Code (IONIC) revision 4
------------------------------------------------------------------------------
(c) Copyright 1990-1994, Hewlett-Packard Company, All rights reserved
------------------------------------------------------------------------------
Processor Speed State CoProcessor State Cache Size
--------- -------- --------------------- ----------------- ----------
0 100 MHz Active Functional 256 KB
Central Bus Speed (in MHz) : 100
Available Memory (bytes) : 268435456
Good Memory Required (bytes): 25538560
Primary boot path: 10/0.9 (dec)
Alternate boot path: 10/12/5.2 (dec)
Console path: 10/4/0.0 (dec)
Keyboard path: 10/12/7.0 (dec)
Processor is booting from first available device.
To discontinue, press any key within 10 seconds.
Boot terminated.
------- Main Menu -------------------------------------------------------------
Command Description
------- -----------
BOot [PRI|ALT|<path>] Boot from specified path
PAth [PRI|ALT] [<path>] Display or modify a path
SEArch [DIsplay|IPL] [<path>] Search for boot devices
COnfiguration menu Displays or sets boot values
INformation menu Displays hardware information
SERvice menu Displays service commands
DIsplay Redisplay the current menu
HElp [<menu>|<command>] Display help for menu or command
RESET Restart the system
-------
Main Menu: Enter command or menu > bo alt
Interact with IPL (Y or N)?> y
Booting...
Boot IO Dependent Code (IODC) revision 0
HARD Booted.
palo ipl 1.5 root [at] hop Sat Apr 23 18:06:47 CEST 2005
Boot image contains:
0/vmlinux32 5894177 bytes @ 0x3d6b000
0/vmlinux64 7167445 bytes @ 0x430a800
0/ramdisk 963641 bytes @ 0x3c7d800
Information: No console specified on kernel command line. This is normal.
PALO will choose the console currently used by firmware (serial).Current command line:
0/vmlinux initrd=initrd TERM=linux root=/dev/ram0 init=/linuxrc cdroot looptype=squashfs loop=/image.squashfs hda=scsi hdb=scsi console=ttyB0
0: 0/vmlinux
1: initrd=initrd
2: TERM=linux
3: root=/dev/ram0
4: init=/linuxrc
5: cdroot
6: looptype=squashfs
7: loop=/image.squashfs
8: hda=scsi
9: hdb=scsi
10: console=ttyB0
<#> edit the numbered field
'b' boot with this command line
'r' restore command line
'l' list dir
? b
Command line for kernel: ' TERM=linux root=/dev/ram0 init=/linuxrc cdroot looptype=squashfs loop=/image.squashfs hda=scsi hdb=scsi console=ttyB0 palo_kernel=0/vmlinux'
Selected kernel: /vmlinux from partition 0
Selected ramdisk: initrd from partition 0
Warning: kernel name doesn't end with 32 or 64 -- Guessing... Choosing 32-bit kernelELF32 executable
Entry 00100000 first 00100000 n 4
Segment 0 load 00100000 size 3827224 mediaptr 0x1000
Segment 1 load 004a7000 size 685496 mediaptr 0x3a8000
Segment 2 load 00550000 size 422021 mediaptr 0x450000
Segment 3 load 00000000 size 0 mediaptr 0x0
Loading ramdisk 963641 bytes @ 0ff04000...
Branching to kernel entry point 0x00100000. If this is the last
message you see, you may need to switch your console. This is
a common symptom -- search the FAQ and mailing list at parisc-linux.org
Linux version 2.6.15.1-pa4-livecd32 (root [at] hak) (gcc version 3.3.6 (Gentoo 3.3.6, pie-8.7.8)) #1 Sun Feb 19 07:39:43 UTC 2006
FP[0] enabled: Rev 1 Model 11
The 32-bit Kernel has started...
Initialized PDC Console for debugging.
Determining PDC firmware type: System Map.
model 000058b0 00000491 00000000 00000002 00382c3d 100000f1 00000004 0000008a 0000008a
vers 0000000d
CPUID vers 11 rev 13 (0x0000016d)
model 9000/819/K200
Total Memory: 256 MB
initrd: 1ff04000-1ffef439
initrd: reserving 0ff04000-0ffef439 (mem_max 10000000)
drivers/parisc/led.c: KittyHawk-Machine (hversion 0x58b) found, LED detection skipped.
LCD display at f0190000,f0190001 registered
Built 1 zonelists
Kernel command line: TERM=linux root=/dev/ram0 init=/linuxrc cdroot looptype=squashfs loop=/image.squashfs hda=scsi hdb=scsi console=ttyB0 palo_kernel=0/vmlinux
ide_setup: hda=scsi
ide_setup: hdb=scsi
PID hash table entries: 2048 (order: 11, 32768 bytes)
Console: colour dummy device 160x64
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 262144k available
Mount-cache hash table entries: 512
checking if image is initramfs... it is
NET: Registered protocol family 16
EISA bus registered
Searching for devices...
Found devices:
1. U2-IOA BC Runway Port at 0xfff8a000 [10] { 12, 0x7, 0x580, 0x0000b }
2. KittyHawk GSY Core BA at 0xffd00000 [10/12] { 11, 0x0, 0x015, 0x00081 }, additional addresses: 0xffd0c000 0xffc00000
3. KittyHawk GSY Core SCSI at 0xffd06000 [10/12/5] { 10, 0x0, 0x015, 0x00082 }
4. KittyHawk GSY Core LAN (802.3) at 0xffd07000 [10/12/6] { 10, 0x0, 0x015, 0x0008a }
5. KittyHawk GSY Core Centronics at 0xffd02000 [10/12/0] { 10, 0x0, 0x015, 0x00074 }, additional addresses: 0xffd01000 0xffd03000
6. KittyHawk GSY Core PS/2 Port at 0xffd08000 [10/12/7] { 10, 0x0, 0x015, 0x00084 }
7. KittyHawk GSY Core PS/2 Port at 0xffd08100 [10/12/8] { 10, 0x0, 0x015, 0x00084 }
8. KittyHawk GSY Core FW-SCSI at 0xf1800000 [10/0] { 4, 0x1, 0x015, 0x00089 }
9. Gecko BOA BC GSC+ Port at 0xf1804000 [10/4] { 7, 0x0, 0x500, 0x0000c }
10. Eole CAP/MUX at 0xf1900000 [10/4/0] { 5, 0x0, 0x015, 0x0000d }
11. Skunk SCSI (28655A) at 0xf1908000 [10/4/8] { 4, 0x0, 0x004, 0x00039 }
12. Skunk Centronics (28655A) at 0xf1909000 [10/4/9] { 5, 0x0, 0x004, 0x0003a }
13. Wizard SCSI at 0xf190c000 [10/4/12] { 4, 0x0, 0x004, 0x0003b }
14. Solaris Modem MUX (J2094A) at 0xf1910000 [10/4/16] { 5, 0x0, 0x00c, 0x0000d }
15. Gecko BOA BC HP-PB Port at 0xf193c000 [10/4/60] { 7, 0x0, 0x103, 0x0000c }
16. HP HSC-PCI Cards at 0xf1808000 [10/8] { 4, 0x0, 0x004, 0x0009d }
17. U2-IOA BC GSC+ Port at 0xf183f000 [10/63] { 7, 0x1, 0x501, 0x0000c }
18. U2-IOA BC Runway Port at 0xfff88000 [8] { 12, 0x7, 0x580, 0x0000b }
19. U2-IOA BC GSC+ Port at 0xf103f000 [8/63] { 7, 0x1, 0x501, 0x0000c }
20. KittyHawk DC2 100 (K200) at 0xfffa0000 [32] { 0, 0x0, 0x58b, 0x00004 }
21. Memory at 0xfffb1000 [49] { 1, 0x0, 0x053, 0x00009 }
CPU(s): 1 x PA7200 (PCX-T') at 100.000000 MHz
Setting cache flush threshold to 360 (1 CPUs online)
Found U2 at 0xfff8a000
Found U2 at 0xfff88000
Lasi version 0 at 0xffd00000 found.
Found GeckoBoa at 0xf1804000
Dino version 3.x (card mode) found at 0xf1808000
Generic PHY: Registered new driver
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
unwind_init: start = 0x104a90b0, end = 0x104df6b0, entries = 13920
Squashfs 2.1 (released 2004/12/10) (C) 2002-2004 Phillip Lougher
Installing knfsd (copyright (C) 1996 okir [at] monad).
SGI XFS with ACLs, security attributes, realtime, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
PDC Stable Storage facility v0.22
Soft power switch support not available.
STI GSC/PCI core graphics driver Version 0.9a
Generic RTC Driver v1.07
serio: GSC PS/2 keyboard port at 0xffd08000 irq 19 @ 10:12:7
serio: GSC PS/2 mouse port at 0xffd08100 irq 19 @ 10:12:8
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Serial mux driver (8 ports) Revision: 0.3
ttyB0 at MMIO 0xf1900800 (polled) is a Mux
ttyB1 at MMIO 0xf1900880 (polled) is a Mux
ttyB2 at MMIO 0xf1900900 (polled) is a Mux
ttyB3 at MMIO 0xf1900980 (polled) is a Mux
ttyB4 at MMIO 0xf1900a00 (polled) is a Mux
ttyB5 at MMIO 0xf1900a80 (polled) is a Mux
ttyB6 at MMIO 0xf1900b00 (polled) is a Mux
ttyB7 at MMIO 0xf1900b80 (polled) is a Mux
Serial mux driver (16 ports) Revision: 0.3
ttyB8 at MMIO 0xf1910800 (polled) is a Mux
ttyB9 at MMIO 0xf1910880 (polled) is a Mux
ttyB10 at MMIO 0xf1910900 (polled) is a Mux
ttyB11 at MMIO 0xf1910980 (polled) is a Mux
ttyB12 at MMIO 0xf1910a00 (polled) is a Mux
ttyB13 at MMIO 0xf1910a80 (polled) is a Mux
ttyB14 at MMIO 0xf1910b00 (polled) is a Mux
ttyB15 at MMIO 0xf1910b80 (polled) is a Mux
ttyB16 at MMIO 0xf1910c00 (polled) is a Mux
ttyB17 at MMIO 0xf1910c80 (polled) is a Mux
ttyB18 at MMIO 0xf1910d00 (polled) is a Mux
ttyB19 at MMIO 0xf1910d80 (polled) is a Mux
ttyB20 at MMIO 0xf1910e00 (polled) is a Mux
ttyB21 at MMIO 0xf1910e80 (polled) is a Mux
ttyB22 at MMIO 0xf1910f00 (polled) is a Mux
ttyB23 at MMIO 0xf1910f80 (polled) is a Mux
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
<keeps scrolling for ever, or at least 15 minutes before I power down>
Thank you in advance,
Brett
--
gentoo-hppa [at] gentoo mailing list
|
