Mailing List Archive: Gentoo: HPPA

VNC server

Index | Next | Previous | View Threaded

tracyde at gmail

Nov 9, 2004, 5:22 AM

Post #1 of 6 (1268 views)
Permalink

VNC server

Does anyone know of a good VNC server that has been ported over the
hppa architecture?

I looked and did not really see anything. I wanted TightVNC but it
doesn't look as though it has been ported over. My plan is to run the
J5600 that I have headless since my S3Virge card idea did not work, so
this system will not have a functioning X server installed.

--
gentoo-hppa [at] gentoo mailing list

ryanm at centurycomputer

Nov 9, 2004, 6:08 AM

Post #2 of 6 (1220 views)
Permalink

RE: VNC server [In reply to]

I believe realvnc has been ported...

Ryan MacLean
Sales Representative
Century Computer
5443 Rainnie Drive, Halifax
Nova Scotia, B3J 1P8
mailto:ryanm [at] centurycomputer
Phone: 423-2500
Fax: 423-2929

-----Original Message-----
From: derek tracy [mailto:tracyde [at] gmail]
Sent: Tuesday, November 09, 2004 8:23 AM
To: gentoo-hppa [at] lists
Subject: [gentoo-hppa] VNC server

Does anyone know of a good VNC server that has been ported over the
hppa architecture?

I looked and did not really see anything. I wanted TightVNC but it
doesn't look as though it has been ported over. My plan is to run the
J5600 that I have headless since my S3Virge card idea did not work, so
this system will not have a functioning X server installed.

--
gentoo-hppa [at] gentoo mailing list

--
gentoo-hppa [at] gentoo mailing list

ryanm at centurycomputer

Nov 12, 2004, 2:01 PM

Post #3 of 6 (1217 views)
Permalink

RE: VNC server [In reply to]

Am I mistaken or is this not in portage?

Ryan MacLean
Sales Representative
Century Computer
5443 Rainnie Drive, Halifax
Nova Scotia, B3J 1P8
mailto:ryanm [at] centurycomputer
Phone: 423-2500
Fax: 423-2929

-----Original Message-----
From: Corné Beerse [mailto:cbeerse [at] lycos]
Sent: Friday, November 12, 2004 4:56 AM
To: gentoo-hppa [at] lists
Subject: Re: [gentoo-hppa] VNC server

derek tracy wrote:

> Does anyone know of a good VNC server that has been ported over the
> hppa architecture?
>
> I looked and did not really see anything. I wanted TightVNC but it
> doesn't look as though it has been ported over. My plan is to run the
> J5600 that I have headless since my S3Virge card idea did not work, so
> this system will not have a functioning X server installed.
>

realvnc has a pa-risc (hp-ux) port:
http://www.realvnc.com/download-free.html,
at the bottom select HP-UX11 and off you go.

Then I recall by head, the debian-pa-risc-linux comes with vnc. I bet this
one
fits better in gentoo, since it is linux too.

In the end, it must be fairly easy to get the vnc-linux-source and build it
yourself.

CBee

--
gentoo-hppa [at] gentoo mailing list

--
gentoo-hppa [at] gentoo mailing list

tracyde at gmail

Nov 22, 2004, 5:40 AM

Post #4 of 6 (1213 views)
Permalink

Re: VNC server [In reply to]

I didn't see it in portage either.

On Fri, 12 Nov 2004 17:01:23 -0400, Ryan MacLean
<ryanm [at] centurycomputer> wrote:
> Am I mistaken or is this not in portage?
>
>
>
> Ryan MacLean
> Sales Representative
> Century Computer
> 5443 Rainnie Drive, Halifax
> Nova Scotia, B3J 1P8
> mailto:ryanm [at] centurycomputer
> Phone: 423-2500
> Fax: 423-2929
>
> -----Original Message-----
> From: Corné Beerse [mailto:cbeerse [at] lycos]
> Sent: Friday, November 12, 2004 4:56 AM
> To: gentoo-hppa [at] lists
> Subject: Re: [gentoo-hppa] VNC server
>
> derek tracy wrote:
>
> > Does anyone know of a good VNC server that has been ported over the
> > hppa architecture?
> >
> > I looked and did not really see anything. I wanted TightVNC but it
> > doesn't look as though it has been ported over. My plan is to run the
> > J5600 that I have headless since my S3Virge card idea did not work, so
> > this system will not have a functioning X server installed.
> >
>
> realvnc has a pa-risc (hp-ux) port:
> http://www.realvnc.com/download-free.html,
> at the bottom select HP-UX11 and off you go.
>
> Then I recall by head, the debian-pa-risc-linux comes with vnc. I bet this
> one
> fits better in gentoo, since it is linux too.
>
> In the end, it must be fairly easy to get the vnc-linux-source and build it
> yourself.
>
> CBee
>
> --
> gentoo-hppa [at] gentoo mailing list
>
> --
> gentoo-hppa [at] gentoo mailing list
>
>

--
gentoo-hppa [at] gentoo mailing list

cbeerse at lycos

Dec 10, 2004, 5:06 AM

Post #5 of 6 (1215 views)
Permalink

Re: VNC server [In reply to]

derek tracy wrote:

> I didn't see it in portage either.

What is portage?

I find HP-UX binaries at
http://www.realvnc.com/dist/vnc-4.0-hpux.tar.gz
http://www.realvnc.com/dist/vnc-4.0-hpux.tar.Z

and sources at
http://www.realvnc.com/dist/vnc-4.0-unixsrc.tar.gz
http://www.realvnc.com/dist/vnc-4.0-unixsrc.tar.Z

The binaries do run on HP-UX 11.0 at our servers without any problem.

CBee

>
>
> On Fri, 12 Nov 2004 17:01:23 -0400, Ryan MacLean
> <ryanm [at] centurycomputer> wrote:
>
>>Am I mistaken or is this not in portage?
>>
>>
>>
>>Ryan MacLean
>>Sales Representative
>>Century Computer
>>5443 Rainnie Drive, Halifax
>>Nova Scotia, B3J 1P8
>>mailto:ryanm [at] centurycomputer
>>Phone: 423-2500
>>Fax: 423-2929
>>
>>-----Original Message-----
>>From: Corné Beerse [mailto:cbeerse [at] lycos]
>>Sent: Friday, November 12, 2004 4:56 AM
>>To: gentoo-hppa [at] lists
>>Subject: Re: [gentoo-hppa] VNC server
>>
>>derek tracy wrote:
>>
>>
>>>Does anyone know of a good VNC server that has been ported over the
>>>hppa architecture?
>>>
>>>I looked and did not really see anything. I wanted TightVNC but it
>>>doesn't look as though it has been ported over. My plan is to run the
>>>J5600 that I have headless since my S3Virge card idea did not work, so
>>>this system will not have a functioning X server installed.
>>>
>>
>>realvnc has a pa-risc (hp-ux) port:
>>http://www.realvnc.com/download-free.html,
>>at the bottom select HP-UX11 and off you go.
>>
>>Then I recall by head, the debian-pa-risc-linux comes with vnc. I bet this
>>one
>>fits better in gentoo, since it is linux too.
>>
>>In the end, it must be fairly easy to get the vnc-linux-source and build it
>>yourself.
>>
>>CBee
>>
>>--
>>gentoo-hppa [at] gentoo mailing list
>>
>>--
>>gentoo-hppa [at] gentoo mailing list
>>
>>
>
>
> --
> gentoo-hppa [at] gentoo mailing list
>
>
>
>

--
gentoo-hppa [at] gentoo mailing list

cbeerse at lycos

Jun 17, 2008, 1:40 AM

Post #6 of 6 (1224 views)
Permalink

Re: VNC server [In reply to]

derek tracy wrote:

> Does anyone know of a good VNC server that has been ported over the
> hppa architecture?
>
> I looked and did not really see anything. I wanted TightVNC but it
> doesn't look as though it has been ported over. My plan is to run the
> J5600 that I have headless since my S3Virge card idea did not work, so
> this system will not have a functioning X server installed.
>

realvnc has a pa-risc (hp-ux) port: http://www.realvnc.com/download-free.html,
at the bottom select HP-UX11 and off you go.

Then I recall by head, the debian-pa-risc-linux comes with vnc. I bet this one
fits better in gentoo, since it is linux too.

In the end, it must be fairly easy to get the vnc-linux-source and build it
yourself.

CBee

--
gentoo-hppa [at] gentoo mailing list

Index | Next | Previous | View Threaded

Interested in having your list archived? Contact Gossamer Threads