Mailing List Archive by Gossamer Threads http://www.gossamer-threads.com/lists/exim/users/ en-us (c) Gossamer Threads Inc. All rights reserved. 12 Feb 2012 18:05:18 -0800 120 75 23 http://www.gossamer-threads.com/lists/exim/users/ http://www.gossamer-threads.com/images/lists/rss_logo.jpg I'm using exim4 with a catchall router to forward mail to a java process. The java process users are the valid recipients. I'm trying to reduce the am 10 Feb 2012 12:43:05 -0800 http://www.gossamer-threads.com/lists/exim/users/93185 Hi, We are using Exim MTA on dedicated server hosted on US data center with CENTOS 5. Our users are in two regions in US and China. Problem is that we 10 Feb 2012 05:38:25 -0800 http://www.gossamer-threads.com/lists/exim/users/93184 Exim users - couple more questions here… 1) Does any cfg file change require a daemon restart? 2) Can Exim be restarted in a graceful fashion such t 07 Feb 2012 10:36:34 -0800 http://www.gossamer-threads.com/lists/exim/users/93179 Dear all, I'd like Exim to send mail bounces not to the original sender, but to another address. As the wiki says, "When a message fails to be deliv 07 Feb 2012 02:35:57 -0800 http://www.gossamer-threads.com/lists/exim/users/93169 Hi! I have a serious problem. Spammers are abusing our system by sending fake bounces to our server, that Exim & 06 Feb 2012 01:37:56 -0800 http://www.gossamer-threads.com/lists/exim/users/93166 Folks using GSSAPI auth, Heimdal 1.4 put in some restrictions on honouring a value of $KRB5_KTNAME inherited from the environment, which means that a 04 Feb 2012 16:59:41 -0800 http://www.gossamer-threads.com/lists/exim/users/93160 Hello Exim Users, I have a few question re: Exim operation specifically ACL and transport functionality and how these interoperate with SpamAssassin. 03 Feb 2012 19:19:20 -0800 http://www.gossamer-threads.com/lists/exim/users/93157 I am trying to set up my MTA server so that it will deliver all mail in which there is a ldap group with atributs to the following, "(cn=domain) and ( 03 Feb 2012 12:11:34 -0800 http://www.gossamer-threads.com/lists/exim/users/93155 How, for the daemon, -odf is exactly the same as -odb? With -odb, the accepting process doesn't wait for the delivery processes to finish. With -odf, 01 Feb 2012 08:11:09 -0800 http://www.gossamer-threads.com/lists/exim/users/93147 hi, is it possible to have a manualroute router that gets executed only if the load average is above a certain value? i want to send some messages on 01 Feb 2012 08:05:52 -0800 http://www.gossamer-threads.com/lists/exim/users/93146 Hello, i want to check IP and LOGIN in acl_smtp_auth (check it before authentication, if too many errors (password guessing) - reject now). As for IP 31 Jan 2012 05:47:43 -0800 http://www.gossamer-threads.com/lists/exim/users/93143 Hello, I have a standard transport and router configured that will look for a message file and a list of recipients that can get the automatic 31 Jan 2012 02:53:16 -0800 http://www.gossamer-threads.com/lists/exim/users/93142 Hi, Does anyone have any experience of using DMARC? See http://dmarc.org/overview.html and http://www.returnpath.net/blog/intheknow/2012/01/return 31 Jan 2012 01:32:34 -0800 http://www.gossamer-threads.com/lists/exim/users/93140 Hello I would like to check user activity (all using SMTP AUTH) and be warned every X messages sent or Y kb sent or Z errors the idea is to put a ca 28 Jan 2012 13:24:21 -0800 http://www.gossamer-threads.com/lists/exim/users/93133 Hi all, The Exim documentation says: "If any condition on a warn statement cannot be completed (that is, there is some sort of defer), the log lin 26 Jan 2012 04:19:35 -0800 http://www.gossamer-threads.com/lists/exim/users/93127 I've got an interesting one. I just need to send email from our helpdesk server using php mailer. I did a basic internet site exim config using dp 25 Jan 2012 07:00:50 -0800 http://www.gossamer-threads.com/lists/exim/users/93126 On Wed, 25 Jan 2012, Marius Stan wrote: > And i had to define that macro THROTTLED_SERVERS, because the hostlist below > doesn't get expanded ?!: > h 25 Jan 2012 01:25:58 -0800 http://www.gossamer-threads.com/lists/exim/users/93125 Hi, Is there any way to see or estimate the usage and popularity of Exim? I am going to do a presentation to a prospective client and would like to i 24 Jan 2012 04:19:12 -0800 http://www.gossamer-threads.com/lists/exim/users/93106 Hello all, I'm currently throttling mail using the following setup: domainlist throttled_domains = yahoo.com : yahoo.co.uk : yahoo.ca : yahoo.es ya 24 Jan 2012 00:37:35 -0800 http://www.gossamer-threads.com/lists/exim/users/93110 Hi all, I need to log all delivery e-mails from a specific user. I have one user who says that one of your contacts are not receiving some your ema 23 Jan 2012 05:00:55 -0800 http://www.gossamer-threads.com/lists/exim/users/93103 Any issues with Berkeley DB 4.8 to 5.3 and Exim 4.7X ? -- Member - Liberal International This is doctor@nl2k.ab.ca Ici doctor@nl2k.ab.ca God, Queen 21 Jan 2012 17:37:28 -0800 http://www.gossamer-threads.com/lists/exim/users/93100 I've been meaning to do this for some time now, but didn't get around to it until this winter's break. As the bug (http://bugs.exim.org/show_bug.cgi? 21 Jan 2012 08:34:29 -0800 http://www.gossamer-threads.com/lists/exim/users/93096 Folks, I compiled exim with libspf ( libspf2-1.2.9 ) I published TXT record for the domain that would deny everything except for my mailers : IN T 20 Jan 2012 11:20:37 -0800 http://www.gossamer-threads.com/lists/exim/users/93088 Hi, exim4.conf.template: plain_server: driver = plaintext public_name = PLAIN server_condition = ${lookup pgsql {select some_condition from som 19 Jan 2012 08:08:12 -0800 http://www.gossamer-threads.com/lists/exim/users/93085 Dear List, actually my exim mailserver is blocked by google mailservers, which is quiete a big problem. (a customers website was hacked in december 18 Jan 2012 14:47:30 -0800 http://www.gossamer-threads.com/lists/exim/users/93075 Assembled Wisdom! This request for information is on behalf of a system, gltap.com, using exim. I am working with the gltap.com admins to enable glt 18 Jan 2012 06:41:10 -0800 http://www.gossamer-threads.com/lists/exim/users/93074 Is it possible to log the type of mail client used in mainlog? Then eximstats could give a summary. This would help us decide which clients to test o 17 Jan 2012 03:29:15 -0800 http://www.gossamer-threads.com/lists/exim/users/93064 How is possible translate an Exime filter into an Sieve filter ? The process is 100% manual or there are some tools that help the user in the transla 16 Jan 2012 08:26:23 -0800 http://www.gossamer-threads.com/lists/exim/users/93058 Hi all, The perl code below has is a file from a Webmin module used to interface with Exim, show stats manage queue etc. The issue is that the date d 16 Jan 2012 06:15:04 -0800 http://www.gossamer-threads.com/lists/exim/users/93056 Not sure what this error means: R=delay10 T=bsmtp_delay_mail defer (-4): mailbox /delay/0/ has too many links (2) Thanks in advance -- ## List 15 Jan 2012 07:09:28 -0800 http://www.gossamer-threads.com/lists/exim/users/93052 Hi, Just thought you all may like to know what sort of mail throughput I am getting from exim. At the moment my mail system is hitting a celling at 14 Jan 2012 10:33:45 -0800 http://www.gossamer-threads.com/lists/exim/users/93051 Hi, I'm co-authoring a draft that would add supplementary information to Received header fields indicating when a message enters some kind of adminis 11 Jan 2012 13:10:36 -0800 http://www.gossamer-threads.com/lists/exim/users/93035 Just out of curiosity, is there any plan for adding milter support to exim? -MSK -- ## List details at https://lists.exim.org/mailman/listinfo/exim- 11 Jan 2012 12:17:44 -0800 http://www.gossamer-threads.com/lists/exim/users/93034 Hi I'm having problems with domains for which i get the error "verification failed - signature did not verify" while cheking dkim signature (gravatar 11 Jan 2012 11:12:35 -0800 http://www.gossamer-threads.com/lists/exim/users/93039 Hi, Please consider this line from the Exim (4.72) mainlog: 2012-01-08 05:17:20 1RjkC8-0007uf-24 <= <> R=1RjkC8-0007ue-15 U=Debian-exim P=local S=17 11 Jan 2012 09:15:01 -0800 http://www.gossamer-threads.com/lists/exim/users/93040 Hi, I have a problem with Exim configuration, some mail go in blackhole by the rule ditch_spam. I whant to make somthing like a whitelist, for those 10 Jan 2012 05:37:49 -0800 http://www.gossamer-threads.com/lists/exim/users/93028 http://bugs.exim.org/show_bug.cgi?id=1141 thanks Matt Justin -- ## List details at https://lists.exim.org/mailman/listinfo/exim-users ## Exim det 06 Jan 2012 21:41:30 -0800 http://www.gossamer-threads.com/lists/exim/users/93016 I'm an ISP in South Africa. I have recently UTF-8'ed all my Databases (mysql) and Web Systems and sites (Apache + PHP 5.3). My 'virtual web' system un 03 Jan 2012 01:11:29 -0800 http://www.gossamer-threads.com/lists/exim/users/92997 Is there some repository I can add for Centos 6 that includes Exim? Thanks in advance -- ## List details at https://lists.exim.org/mailman/listinfo 02 Jan 2012 11:09:39 -0800 http://www.gossamer-threads.com/lists/exim/users/92988 Is their a feture set / way to turn on Outbound Spam protection in Exim? -- Member - Liberal International This is doctor@nl2k.ab.ca Ici doctor@nl 02 Jan 2012 06:59:02 -0800 http://www.gossamer-threads.com/lists/exim/users/92982 Hi guys, quick question , this is inside the acl_smtp_data : ... accept condition = ${if or{\ { and{ {!def:spa 02 Jan 2012 06:37:43 -0800 http://www.gossamer-threads.com/lists/exim/users/92980 In order to throttle bad senders I was thinking about using ratelimit to count the number of bad attempts per period. in acl_smtp_rcpt and acl_smtp_ 30 Dec 2011 10:49:19 -0800 http://www.gossamer-threads.com/lists/exim/users/92971 Hi all, Happy Holidays :-) Does anyone have a simple perl snippett that accepts base62 code (as in exim mail IDs) and converts it to decimal ? -Gra 30 Dec 2011 08:26:30 -0800 http://www.gossamer-threads.com/lists/exim/users/92970 Folks We've had a complaint from a technically literate, helpful, friendly member of the list that they are receiving feedback loop reports from one 29 Dec 2011 11:13:46 -0800 http://www.gossamer-threads.com/lists/exim/users/92968 Good afternoon! Prompt, whether it is possible to make a donation to project EXIM? We use it in the work and would like to thank authors for their w 28 Dec 2011 00:06:24 -0800 http://www.gossamer-threads.com/lists/exim/users/92965 Thanks for replies. Meanwhile, for reasons I'm not clear about, the problem has gone away and mail is arriving normally. I think it may have been som 26 Dec 2011 02:35:26 -0800 http://www.gossamer-threads.com/lists/exim/users/92964 To introduce myself briefly, I'm using exim4 on Debian Sid together with mutt; I've done so for some years. I have this on two machines, on both of w 24 Dec 2011 08:45:50 -0800 http://www.gossamer-threads.com/lists/exim/users/92962 Good afternoon guys! I have the following question: I need to redirect all mail in the Subject containing the term "Test Email" to a particular a 23 Dec 2011 08:29:11 -0800 http://www.gossamer-threads.com/lists/exim/users/92960 Hi, Can you recommend a good book on exim to get me further? I have been running a private smtp server for a few years now and know a little about a 23 Dec 2011 04:39:13 -0800 http://www.gossamer-threads.com/lists/exim/users/92956 I am sure this is very simple to do, but after researching for 30 minutes I couldn't find a sensible solution. I am trying to white list a trusted ma 22 Dec 2011 11:59:25 -0800 http://www.gossamer-threads.com/lists/exim/users/92952 Hello, this is my first post to this (and any list in general) list so please bear with me... On an old linux box I had a handler installed in /etc/ 22 Dec 2011 03:15:00 -0800 http://www.gossamer-threads.com/lists/exim/users/92953 is it possible to redirect a rewrite outgoing? I read that redirect is used for incoming, but can I use it for outgoing? I'm trying to send mail usi 20 Dec 2011 17:17:04 -0800 http://www.gossamer-threads.com/lists/exim/users/92948 We have been toying with the concept of ratelimiting for some time. We use it create log entries and in some cases we use the control=freeze option 16 Dec 2011 10:48:24 -0800 http://www.gossamer-threads.com/lists/exim/users/92937 Hello I need some help and maybe a good idea. I setup a recent debian system with exim4 and cyrus IMAP server. I use the exiscan method and SpamAssas 16 Dec 2011 08:53:30 -0800 http://www.gossamer-threads.com/lists/exim/users/92930 I could use some hints on where to look in my configuration to solve the following problem. Email for a secondary MX domain comes into Exim, finds t 16 Dec 2011 08:27:21 -0800 http://www.gossamer-threads.com/lists/exim/users/92927 I need a script, or help doing one. I need a script that sends me an email when qeue is bigger than 2.500 emails. Can anyone help me ? Thx in ad 15 Dec 2011 11:55:40 -0800 http://www.gossamer-threads.com/lists/exim/users/92919 I'm probably blind but I'm looking for a variable to read to determine either the return code of the last message sent or perhaps whether there was 14 Dec 2011 14:34:02 -0800 http://www.gossamer-threads.com/lists/exim/users/92916 Dear List, Today I've found out that there's no identity (i=) in the DKIM signature. I've googled a lot and cannot find any info relating to this. 14 Dec 2011 02:25:44 -0800 http://www.gossamer-threads.com/lists/exim/users/92912 Im still trying to get my multi smarthost lookup working :-(( Ive started from a gmail login that works and am working from there router send_via_ 11 Dec 2011 12:52:11 -0800 http://www.gossamer-threads.com/lists/exim/users/92900 Hi All, I am trying to use the ratelimit to deny any more than 10 emails per second. I have tried adding this to the /etc/exim4/exim4.conf.template 09 Dec 2011 13:39:15 -0800 http://www.gossamer-threads.com/lists/exim/users/92896 On Fri, Dec 09, 2011 at 11:27:44AM +0100, Nicolas KOWALSKI wrote: > I am looking for a way to check that $authenticated_id@$qualify_domain, > $sender 09 Dec 2011 06:02:19 -0800 http://www.gossamer-threads.com/lists/exim/users/92897 Hello, I tried disabling sender verification for one single IP address, but it doesn't work as expected: require verify = sender host 08 Dec 2011 18:17:22 -0800 http://www.gossamer-threads.com/lists/exim/users/92890 the SSL through stunnel (localhost:26 -> isp:465) works but the gmail tls doesn't ( well , i think it did , but overnight it seems to have stopped) 08 Dec 2011 10:05:13 -0800 http://www.gossamer-threads.com/lists/exim/users/92888 Hello there, I am trying to setup (with no success) a simple smarthost box where I just receive all email and redirect it to the real mail server. Ca 07 Dec 2011 11:12:02 -0800 http://www.gossamer-threads.com/lists/exim/users/92886 After upgrading from 4.71 to 4.77 a week ago, I have had a few cases of corrupted spool files. When looking at the H-file, I can see that some head 07 Dec 2011 00:06:34 -0800 http://www.gossamer-threads.com/lists/exim/users/92883 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Hello, I stumble over the problem that "lookup" is not possible inside of an "and" construct. While 01 Dec 2011 07:14:58 -0800 http://www.gossamer-threads.com/lists/exim/users/92848 Hello, just a short question: how do I handle hostnames in domains? I extract the list of local_domains out of our corporate ldap. It is a list of 01 Dec 2011 02:13:30 -0800 http://www.gossamer-threads.com/lists/exim/users/92846 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Hello folks, I want to implement the relevant part of amavis spamchecking direct in exim using embed 29 Nov 2011 07:52:34 -0800 http://www.gossamer-threads.com/lists/exim/users/92826 Hi. I'm hoping this is a simple question, apologies if it's too simple. I did check documentation/wiki etc but haven't been able to make this work. I' 28 Nov 2011 07:46:17 -0800 http://www.gossamer-threads.com/lists/exim/users/92822 Dear list, I have been having an issues/concern with my mail server setup. because MUA like outlook send along the IP of the originating client machi 28 Nov 2011 05:37:28 -0800 http://www.gossamer-threads.com/lists/exim/users/92814 Hi exim users, Quick question, I would like to know what DNSBLs you use and why? There is a large list at http://www.declude.com/Articles.asp?ID=97. 28 Nov 2011 04:15:57 -0800 http://www.gossamer-threads.com/lists/exim/users/92820 i have not receive any message from this list for the pass 3 days, is something wrong with the list or my mail server?? -- ## List details at https 28 Nov 2011 03:41:06 -0800 http://www.gossamer-threads.com/lists/exim/users/92812 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Hello, I have a setup where we limit the sending rate for users respective IPs to 1500 per hour. Tha 25 Nov 2011 06:15:17 -0800 http://www.gossamer-threads.com/lists/exim/users/92810 I noticed today that if Exim produces a 550 message consisting of a long message (separated by \) or three lines, for example, (separated by \n \) Yah 23 Nov 2011 06:15:48 -0800 http://www.gossamer-threads.com/lists/exim/users/92795 ive got my TLS smarthost working , now I need to sort the SSL one. ive setup stunnel and can telnet to localhost 26 , which brings up the remote 22 Nov 2011 13:37:34 -0800 http://www.gossamer-threads.com/lists/exim/users/92789 Hi, I seem to have some apps that are sending with a underscore in the domain part. Searching the exim-user archives suggests that I can work around 22 Nov 2011 05:36:22 -0800 http://www.gossamer-threads.com/lists/exim/users/92776 Hello I am using following 2 lines in top of exim.conf local_interfaces = 127.0.0.1 daemon_smtp_ports = 125 It proxies to my antispam filter (ASSP) 21 Nov 2011 00:59:06 -0800 http://www.gossamer-threads.com/lists/exim/users/92775 I'm using the system_filter to automatically archive emails to another server. It had been working fine for a while. But now due to some unknown and i 20 Nov 2011 21:45:43 -0800 http://www.gossamer-threads.com/lists/exim/users/92770 Hello I an new to exim. I follow this configuration: http://wiki.edseek.com/howto:exim4_courier without the imapi neither filters. But altough i 19 Nov 2011 16:43:48 -0800 http://www.gossamer-threads.com/lists/exim/users/92773 Im trying to set up multiple SMTP smarthosts and falling at the first hurdle with the first host Do i need to tell it to use the gmail_login authent 18 Nov 2011 13:21:28 -0800 http://www.gossamer-threads.com/lists/exim/users/92764 I'm new to Linux and I have successfully deployed mailman with Exim4. I want to configure mailman router to accept post from only local domain i.e. us 16 Nov 2011 20:28:35 -0800 http://www.gossamer-threads.com/lists/exim/users/92763 I'm having an issue with Exim 4.63 on a Centos server. Exim will run fine for a few days then all of a sudden start reporting that there are too many 16 Nov 2011 09:27:45 -0800 http://www.gossamer-threads.com/lists/exim/users/92761 im giving up on the cpanel hosting and going to try and run this off my ubuntu LAN server with multiple smtp authentication and rate-limited to the 15 Nov 2011 06:02:29 -0800 http://www.gossamer-threads.com/lists/exim/users/92753 My ISP limits me to 150 emails/hr (even through their cpanel mailman application!) i would like to add a delay =30 secs to my own exim config so i ca 14 Nov 2011 23:58:48 -0800 http://www.gossamer-threads.com/lists/exim/users/92751 Just wondering what happens when you mix verify ACLs where some calls are with cache and some without. Can I assume that no_cache means not to check 14 Nov 2011 12:38:39 -0800 http://www.gossamer-threads.com/lists/exim/users/92748 Hello. I have 2 smarthosts. Each of these smarthosts requires smtp authentication for relaying. I have logins and passwords for both of the smarthos 14 Nov 2011 10:31:46 -0800 http://www.gossamer-threads.com/lists/exim/users/92750 Not sure what changed but when I hit my send button 4.77 seems a lot faster. -- ## List details at https://lists.exim.org/mailman/listinfo/exim-use 14 Nov 2011 09:39:07 -0800 http://www.gossamer-threads.com/lists/exim/users/92747 Just wanted to share a trick I'm trying on backup MX servers to prevent spam. As you know often spammers will try the backup MX server hoping the ba 14 Nov 2011 05:35:40 -0800 http://www.gossamer-threads.com/lists/exim/users/92743 Dear Group Members, I want to block emails which can be sent from scripts (i.e. php, c# etc) how do I prevent my mailing list from such emails??? 13 Nov 2011 23:41:00 -0800 http://www.gossamer-threads.com/lists/exim/users/92742 Looks like I'm missing something but not sure what. >>> version 4.77 #8 gcc exim_dbmbuild.c In file included from exim_dbmbuild.c:31: exim.h:433:18 13 Nov 2011 09:16:06 -0800 http://www.gossamer-threads.com/lists/exim/users/92736 Hey, So I'm working on getting all incoming and outgoing messages to be archived on my system. For the most part it works but e-m 12 Nov 2011 07:49:20 -0800 http://www.gossamer-threads.com/lists/exim/users/92735 dear all, how can i inject email to all local/virtual users on multiple domains ? i can do it with vpopbull on vpopmail, but how to do it on exim/cpa 08 Nov 2011 03:46:29 -0800 http://www.gossamer-threads.com/lists/exim/users/92714 Let's see what we end up with, playing around with: https://plus.google.com/101257968735428844827 -Phil -- ## List details at https://lists.exim 07 Nov 2011 16:24:36 -0800 http://www.gossamer-threads.com/lists/exim/users/92711 I am using Request Tracker (http://www.bestpractical.com) which has a mailgate. In the past I've just used aliases to pipe the mail to the appropriat 07 Nov 2011 13:48:00 -0800 http://www.gossamer-threads.com/lists/exim/users/92706 Hi all, does anyone knows how to disable bounce message of any type of error (permament or temporary)? I have a small smtp list server running exim, 07 Nov 2011 10:18:27 -0800 http://www.gossamer-threads.com/lists/exim/users/92703 Hi, I'm a bit in the dark here... For the love of me, I cannot determine why this (and only this specific email from battle.net) are being rejected 07 Nov 2011 04:45:50 -0800 http://www.gossamer-threads.com/lists/exim/users/92695 Hi Dave, thanks for the answer, but what if I want to restart checking the user at the time I reenable him/her ? in both your cases the check is ski 06 Nov 2011 07:39:03 -0800 http://www.gossamer-threads.com/lists/exim/users/92693 Hello looking around in the maillist archive I've seen a couple of ideas to manage (warn/block) accounts that send too fast or have too many errors i 06 Nov 2011 07:19:31 -0800 http://www.gossamer-threads.com/lists/exim/users/92691 The scenario: a workstation (Debian GNU/Linux) with several accounts. "Several" could range from a small handful to scores or more, so while individ 04 Nov 2011 12:36:03 -0800 http://www.gossamer-threads.com/lists/exim/users/92689 I'm up to Exim 4.71 with Ubuntu Lucid. I've got some procmail jobs that send out email using Exim, as a named system user. :0 |/usr/sbin/exim4 03 Nov 2011 11:02:49 -0800 http://www.gossamer-threads.com/lists/exim/users/92683