Mailing List Archive: MythTV: Users

How-to AirPlay question

Index | Next | Previous | View Threaded

ashu.desai at gmail

Apr 17, 2012, 2:09 PM

Post #1 of 52 (1815 views)
Permalink

How-to AirPlay question

Hello all,
I have followed instructions per

http://www.mythtv.org/wiki/AirTunes/AirPlay

How do I actually use this? Say if I have a video under iPhone/iPad, how
would I have it to play on Myth; now that I have followed the steps?

BTW, I did *not* get the "Failed to read the RAOP" part, but I still went
ahead and did all the steps.

Thanks,

Ash

http://about.me/adesai

mythtv at hambone

Apr 17, 2012, 2:19 PM

Post #2 of 52 (1792 views)
Permalink

Re: How-to AirPlay question [In reply to]

On Tue, Apr 17, 2012 at 5:09 PM, A Desai <ashu.desai [at] gmail> wrote:

> Hello all,
> I have followed instructions per
>
> http://www.mythtv.org/wiki/AirTunes/AirPlay
>
> How do I actually use this? Say if I have a video under iPhone/iPad, how
> would I have it to play on Myth; now that I have followed the steps?
>
>
Basically, you play the video on your iOS device, then change the output.
There is a little box on your iOS device screen with an arrow on the lower
right (I believe). Select that box and find the mythtv output and that's
it -- it plays on your mythtv frontend.

That being said, I have not attempted this yet. I've just done this with
my AppleTV 2 and my XBMC box.

Good luck!
Jerry

jon at whitear

Apr 17, 2012, 5:19 PM

Post #3 of 52 (1779 views)
Permalink

Re: How-to AirPlay question [In reply to]

> On Tue, Apr 17, 2012 at 5:09 PM, A Desai < ashu.desai [at] gmail >
> wrote:

> > Hello all,
>
> > I have followed instructions per
>

> > http://www.mythtv.org/wiki/AirTunes/AirPlay
>

> > How do I actually use this? Say if I have a video under
> > iPhone/iPad,
> > how would I have it to play on Myth; now that I have followed the
> > steps?
>

> Basically, you play the video on your iOS device, then change the
> output. There is a little box on your iOS device screen with an
> arrow on the lower right (I believe). Select that box and find the
> mythtv output and that's it -- it plays on your mythtv frontend.

> That being said, I have not attempted this yet. I've just done this
> with my AppleTV 2 and my XBMC box.

> Good luck!
> Jerry

That's right. I set up airplay last night and it works a treat. Just start playing the content on your IOS device (e.g. video, music, you tube etc) and an extra control (the box with the arrow) pops up on the IOS device next to the play/pause controls to direct the output to your frontend. I tried it playing music and videos from my iphone and ipad2 and it was flawless. the volume can be controlled from the IOS device, and you can seek through video using your TV remote. It's very cool.

This article explains:

http://support.apple.com/kb/HT4437

Cheers,

Jon

_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users

jason at mcleods

Apr 17, 2012, 5:47 PM

Post #4 of 52 (1779 views)
Permalink

Re: How-to AirPlay question [In reply to]

I followed the instructions too and I can see the device listed on my iPhone as a target. But I just get Errors in my fronted log "no session id in http request"

Are there packages that are required to support this feature, that I may be missing?

- Jason

On 2012-04-17, at 5:09 PM, A Desai <ashu.desai [at] gmail> wrote:

> Hello all,
> I have followed instructions per
>
> http://www.mythtv.org/wiki/AirTunes/AirPlay
>
> How do I actually use this? Say if I have a video under iPhone/iPad, how would I have it to play on Myth; now that I have followed the steps?
>
> BTW, I did *not* get the "Failed to read the RAOP" part, but I still went ahead and did all the steps.
>
> Thanks,
>
> Ash
>
>
> http://about.me/adesai
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users

Attachments:

smime.p7s (2.52 KB)

ashu.desai at gmail

Apr 17, 2012, 6:17 PM

Post #5 of 52 (1784 views)
Permalink

Re: How-to AirPlay question [In reply to]

I do *not* see any airplay icon - and it seems that is the case because
there is no air-play options.

To re-iterate, right from the beginning, I never got the message "No RAOP
found". I still went ahead on my Frontend and created RAOP.rsa where I
pasted the key.

Anything I can check (services, etc) to confirm if my side is installed ok?

Regards,
Ash

On Tue, Apr 17, 2012 at 7:47 PM, Jason McLeod <jason [at] mcleods> wrote:

> I followed the instructions too and I can see the device listed on my
> iPhone as a target. But I just get Errors in my fronted log "no session id
> in http request"
>
> Are there packages that are required to support this feature, that I may
> be missing?
>
> - Jason
>
> On 2012-04-17, at 5:09 PM, A Desai <ashu.desai [at] gmail> wrote:
>
> Hello all,
> I have followed instructions per
>
> http://www.mythtv.org/wiki/AirTunes/AirPlay
>
> How do I actually use this? Say if I have a video under iPhone/iPad, how
> would I have it to play on Myth; now that I have followed the steps?
>
> BTW, I did *not* get the "Failed to read the RAOP" part, but I still went
> ahead and did all the steps.
>
> Thanks,
>
> Ash
>
>
> http://about.me/adesai
>
> _______________________________________________
>
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users
>
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users
>
>

--
http://about.me/adesai

ashu.desai at gmail

Apr 17, 2012, 6:29 PM

Post #6 of 52 (1782 views)
Permalink

Re: How-to AirPlay question [In reply to]

This is what I see when I turn on my Frontend:

(On a separate note, it somehow takes OpenGL as the default painter, so I
have to force it to use QT via CLI)

--------------------------------------------

[root [at] F ~]# export MYTHTV_AIRPLAY="1"

[root [at] F ~]# mythfrontend -O ThemePainter=qt
2012-04-17 20:18:21.014775 C mythfrontend version: fixes/0.25
[v0.25-17-g682e6f5] www.mythtv.org
2012-04-17 20:18:21.014908 N Enabled verbose msgs: general
2012-04-17 20:18:21.015041 N Setting Log Level to LOG_INFO
2012-04-17 20:18:21.015279 I Added logging to the console
2012-04-17 20:18:21.015310 I Added database logging to table logging
2012-04-17 20:18:21.015623 N Setting up SIGHUP handler
2012-04-17 20:18:21.016069 N Using runtime prefix = /usr
2012-04-17 20:18:21.016254 N Using configuration directory = /root/.mythtv
2012-04-17 20:18:21.016955 I Assumed character encoding: en_US.UTF-8
2012-04-17 20:18:21.019891 N Empty LocalHostName.
2012-04-17 20:18:21.019946 I Using localhost value of FE.local
2012-04-17 20:18:21.118611 N Setting QT default locale to en_US
2012-04-17 20:18:21.118705 I Current locale en_US
2012-04-17 20:18:21.118888 N Reading locale defaults from
/usr/share/mythtv//locales/en_us.xml
2012-04-17 20:18:21.147389 I Starting process manager
2012-04-17 20:18:21.147717 I Starting IO manager (write)
2012-04-17 20:18:21.151044 I Starting IO manager (read)
2012-04-17 20:18:21.151571 I Starting process signal handler
2012-04-17 20:18:22.273484 I ScreenSaverX11Private: DPMS is not supported.
Xlib: extension "XFree86-VidModeExtension" missing on display
"localhost:10.0".
2012-04-17 20:18:24.324849 E X11 ModeLine query failed
2012-04-17 20:18:24.326124 N Desktop video mode: 1920x1080 60.000 Hz
2012-04-17 20:18:26.377893 N Setting 'ThemePainter' being forced to 'qt'
2012-04-17 20:18:26.387608 I Listening on TCP 127.0.0.1:6547
2012-04-17 20:18:26.387960 I Listening on TCP x.x.x.x:6547
2012-04-17 20:18:26.390751 I Listening on TCP [0:0:0:0:0:0:0:1]:6547
2012-04-17 20:18:27.436949 I AirPay: Created airplay objects.
2012-04-17 20:18:27.437893 I Listening on TCP 127.0.0.1:5100
2012-04-17 20:18:27.438231 I Listening on TCP x.x.x.x:5100
2012-04-17 20:18:27.441945 I Listening on TCP [0:0:0:0:0:0:0:1]:5100
2012-04-17 20:18:27.442072 I AirPay: Listening for connections on port 5100
2012-04-17 20:18:27.446449 I Loading en_us translation for module
mythfrontend
2012-04-17 20:18:28.356272 I Bonjour: Service registration complete: name
'MythTV on FE.local' type '_airplay._tcp.' domain: 'local.'
2012-04-17 20:18:28.497493 E LIRC: Failed to connect to Unix socket
'/var/run/lirc/lircd'
eno: No such file or directory (2)
2012-04-17 20:18:28.497681 E JoystickMenuThread: Joystick disabled -
Failed to read /root/.mythtv/joystickmenurc
2012-04-17 20:18:28.499675 I Binding to UDP 127.0.0.1:6948
2012-04-17 20:18:28.499856 I Binding to UDP x.x.x.x:6948
2012-04-17 20:18:28.502423 I Binding to UDP [0:0:0:0:0:0:0:1]:6948
2012-04-17 20:18:28.502657 I Binding to UDP x.x.x.255:6948
2012-04-17 20:18:28.577067 W Key Esc is bound to multiple actions in
context Main Menu.
2012-04-17 20:18:28.595947 I Using Frameless Window
2012-04-17 20:18:28.596130 I Using Full Screen Window
2012-04-17 20:18:31.281265 I Using the Qt painter
2012-04-17 20:18:31.462392 E MythFontProperties: Failed to load 'Arial',
got 'DejaVu Sans' instead
Location: /root/.mythtv/themes/Willi/base.xml @ 33
Name: 'videocodec' Type: 'fontdef'
2012-04-17 20:18:31.705575 E XMLParseBase: Unknown widget type.
Location: /root/.mythtv/themes/Willi/base.xml @ 647
Name: '' Type: 'layout'
2012-04-17 20:18:32.001817 E MythUIHelper:
LoadScaleImage(icons/file-saveas.png)Unable to find image file
2012-04-17 20:18:32.369211 E XMLParseBase: Unable to load window
'backgroundwindow' from base
2012-04-17 20:18:32.394038 I Current MythTV Schema Version (DBSchemaVer):
1299
2012-04-17 20:18:34.050346 W Key Esc is bound to multiple actions in
context Main Menu.
2012-04-17 20:18:34.272358 N Registering Internal as a media playback
plugin.
2012-04-17 20:18:34.401906 I Loading en_us translation for module
mytharchive
2012-04-17 20:18:34.416135 N Registering WebBrowser as a media playback
plugin.
2012-04-17 20:18:34.416347 I Loading en_us translation for module
mythbrowser
2012-04-17 20:18:34.467806 I Loading en_us translation for module
mythgallery
2012-04-17 20:18:34.483434 I Loading en_us translation for module mythgame
2012-04-17 20:18:34.516344 I Current MythMusic Schema Version
(MusicDBSchemaVer): 1019
2012-04-17 20:18:34.557732 I Loading en_us translation for module mythmusic
2012-04-17 20:18:34.567025 I Loading en_us translation for module
mythnetvision
2012-04-17 20:18:34.579603 I Loading en_us translation for module mythnews
2012-04-17 20:18:34.595104 I Loading en_us translation for module
mythweather
2012-04-17 20:18:34.628205 N Found mainmenu.xml for theme 'Willi'
2012-04-17 20:18:34.707381 I MythCoreContext: Connecting to backend
server: x.x.x.x:6543 (try 1 of 1)
2012-04-17 20:18:34.709590 I Using protocol version 72
2012-04-17 20:18:41.127057 I Bonjour: Service registration complete: name
'Mythfrontend on FE.local' type '_mythfrontend._tcp.' domain: 'local.'
2012-04-17 20:22:44.540513 I Received remote 'Clear Cache' request

------------------------------------------------------------------------------------------------

No AirPlay as it stands...

Ash

On Tue, Apr 17, 2012 at 8:17 PM, A Desai <ashu.desai [at] gmail> wrote:

> I do *not* see any airplay icon - and it seems that is the case because
> there is no air-play options.
>
> To re-iterate, right from the beginning, I never got the message "No RAOP
> found". I still went ahead on my Frontend and created RAOP.rsa where I
> pasted the key.
>
> Anything I can check (services, etc) to confirm if my side is installed ok?
>
> Regards,
> Ash
>
>
> On Tue, Apr 17, 2012 at 7:47 PM, Jason McLeod <jason [at] mcleods> wrote:
>
>> I followed the instructions too and I can see the device listed on my
>> iPhone as a target. But I just get Errors in my fronted log "no session id
>> in http request"
>>
>> Are there packages that are required to support this feature, that I may
>> be missing?
>>
>> - Jason
>>
>> On 2012-04-17, at 5:09 PM, A Desai <ashu.desai [at] gmail> wrote:
>>
>> Hello all,
>> I have followed instructions per
>>
>> http://www.mythtv.org/wiki/AirTunes/AirPlay
>>
>> How do I actually use this? Say if I have a video under iPhone/iPad, how
>> would I have it to play on Myth; now that I have followed the steps?
>>
>> BTW, I did *not* get the "Failed to read the RAOP" part, but I still went
>> ahead and did all the steps.
>>
>> Thanks,
>>
>> Ash
>>
>>
>> http://about.me/adesai
>>
>> _______________________________________________
>>
>> mythtv-users mailing list
>> mythtv-users [at] mythtv
>> http://www.mythtv.org/mailman/listinfo/mythtv-users
>>
>>
>> _______________________________________________
>> mythtv-users mailing list
>> mythtv-users [at] mythtv
>> http://www.mythtv.org/mailman/listinfo/mythtv-users
>>
>>
>
>
> --
> http://about.me/adesai
>

--
http://about.me/adesai

jyavenard at gmail

Apr 17, 2012, 7:17 PM

Post #7 of 52 (1771 views)
Permalink

Re: How-to AirPlay question [In reply to]

On 18 April 2012 11:29, A Desai <ashu.desai [at] gmail> wrote:
> This is what I see when I turn on my Frontend:
>
> (On a�separate�note, it somehow takes OpenGL as the default painter, so I
> have to force it to use QT via CLI)
>
> --------------------------------------------
>
> [root [at] F ~]# export MYTHTV_AIRPLAY="1"
>
> [root [at] F ~]# mythfrontend -O ThemePainter=qt
> 2012-04-17 20:18:21.014775 C �mythfrontend version: fixes/0.25
> [v0.25-17-g682e6f5] www.mythtv.org

Where did you get your mythfrontend from, did you compile it yourself?

You need to build with openssl dev installed
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users

ashu.desai at gmail

Apr 17, 2012, 7:35 PM

Post #8 of 52 (1778 views)
Permalink

Re: How-to AirPlay question [In reply to]

Yes, I compiled it - got it from http://code.mythtv.org/trac

I am no linux guru - I barely make it. I had openssl installed, i now have
devel also installed.

[root [at] F ~]# rpm -qa | grep openssl
openssl-1.0.0-20.el6_2.3.i686
openssl-devel-1.0.0-20.el6_2.3.i686

I restarted avahi-daemon service, AirPlay didn't work. So I restarted the
Frontend. I still do not see the RAOP message anywhere. This is what I see
- no AirPlay.

----------------------------------

[root [at] F ~]# export MYTHTV_AIRPLAY="1"

[root [at] F ~]# mythfrontend -O themepainter=qt
2012-04-17 21:30:43.457331 C mythfrontend version: fixes/0.25
[v0.25-17-g682e6f5] www.mythtv.org
2012-04-17 21:30:43.457461 N Enabled verbose msgs: general
2012-04-17 21:30:43.457600 N Setting Log Level to LOG_INFO
2012-04-17 21:30:43.457857 I Added logging to the console
2012-04-17 21:30:43.457888 I Added database logging to table logging
2012-04-17 21:30:43.458213 N Setting up SIGHUP handler
2012-04-17 21:30:43.458731 N Using runtime prefix = /usr
2012-04-17 21:30:43.458841 N Using configuration directory = /root/.mythtv
2012-04-17 21:30:43.459528 I Assumed character encoding: en_US.UTF-8
2012-04-17 21:30:43.463888 N Empty LocalHostName.
2012-04-17 21:30:43.463945 I Using localhost value of FE.local
2012-04-17 21:30:43.610776 N Setting QT default locale to en_US
2012-04-17 21:30:43.610857 I Current locale en_US
2012-04-17 21:30:43.613713 N Reading locale defaults from
/usr/share/mythtv//locales/en_us.xml
2012-04-17 21:30:43.634518 I Starting process manager
2012-04-17 21:30:43.634886 I Starting process signal handler
2012-04-17 21:30:43.635153 I Starting IO manager (read)
2012-04-17 21:30:43.638253 I Starting IO manager (write)
2012-04-17 21:30:44.754367 I ScreenSaverX11Private: DPMS is not supported.
Xlib: extension "XFree86-VidModeExtension" missing on display
"localhost:10.0".
2012-04-17 21:30:46.796368 E X11 ModeLine query failed
2012-04-17 21:30:46.798441 N Desktop video mode: 1920x1080 60.000 Hz
2012-04-17 21:30:48.847045 N Setting 'themepainter' being forced to 'qt'
2012-04-17 21:30:48.872068 I Listening on TCP 127.0.0.1:6547
2012-04-17 21:30:48.873342 I Listening on TCP x.x.x..56:6547
2012-04-17 21:30:48.876096 I Listening on TCP [0:0:0:0:0:0:0:1]:6547
2012-04-17 21:30:49.880823 I AirPay: Created airplay objects.
2012-04-17 21:30:49.881781 I Listening on TCP 127.0.0.1:5100
2012-04-17 21:30:49.882048 I Listening on TCP x.x.x..56:5100
2012-04-17 21:30:49.885598 I Listening on TCP [0:0:0:0:0:0:0:1]:5100
2012-04-17 21:30:49.885719 I AirPay: Listening for connections on port 5100
2012-04-17 21:30:49.896914 I Loading en_us translation for module
mythfrontend
2012-04-17 21:30:50.804337 I Bonjour: Service registration complete: name
'MythTV on FE.local' type '_airplay._tcp.' domain: 'local.'
2012-04-17 21:30:50.935043 E LIRC: Failed to connect to Unix socket
'/var/run/lirc/lircd'
eno: No such file or directory (2)
2012-04-17 21:30:50.935213 E JoystickMenuThread: Joystick disabled -
Failed to read /root/.mythtv/joystickmenurc
2012-04-17 21:30:50.937050 I Binding to UDP 127.0.0.1:6948
2012-04-17 21:30:50.937216 I Binding to UDP x.x.x..56:6948
2012-04-17 21:30:50.939809 I Binding to UDP [0:0:0:0:0:0:0:1]:6948
2012-04-17 21:30:50.940018 I Binding to UDP x.x.x..255:6948
2012-04-17 21:30:51.011801 W Key Esc is bound to multiple actions in
context Main Menu.
2012-04-17 21:30:51.027604 I Using Frameless Window
2012-04-17 21:30:51.027795 I Using Full Screen Window
2012-04-17 21:30:53.692805 I Using the Qt painter
2012-04-17 21:30:53.903780 E MythFontProperties: Failed to load 'Arial',
got 'DejaVu Sans' instead
Location: /root/.mythtv/themes/Willi/base.xml @ 33
Name: 'videocodec' Type: 'fontdef'
2012-04-17 21:30:54.147782 E XMLParseBase: Unknown widget type.
Location: /root/.mythtv/themes/Willi/base.xml @ 647
Name: '' Type: 'layout'
2012-04-17 21:30:54.400964 E MythUIHelper:
LoadScaleImage(icons/file-saveas.png)Unable to find image file
2012-04-17 21:30:54.754770 E XMLParseBase: Unable to load window
'backgroundwindow' from base
2012-04-17 21:30:54.785615 I Current MythTV Schema Version (DBSchemaVer):
1299
2012-04-17 21:30:56.558838 W Key Esc is bound to multiple actions in
context Main Menu.
2012-04-17 21:30:56.770718 N Registering Internal as a media playback
plugin.
2012-04-17 21:30:57.158723 A MMUnix:CheckMountable: DBus interface error:
2012-04-17 21:30:57.766066 I Loading en_us translation for module
mytharchive
2012-04-17 21:30:57.781389 N Registering WebBrowser as a media playback
plugin.
2012-04-17 21:30:57.781926 I Loading en_us translation for module
mythbrowser
2012-04-17 21:30:57.834685 I Loading en_us translation for module
mythgallery
2012-04-17 21:30:57.854331 I Loading en_us translation for module mythgame
2012-04-17 21:30:57.911140 I Current MythMusic Schema Version
(MusicDBSchemaVer): 1019
2012-04-17 21:30:57.950451 I Loading en_us translation for module mythmusic
2012-04-17 21:30:57.963681 I Loading en_us translation for module
mythnetvision
2012-04-17 21:30:57.979170 I Loading en_us translation for module mythnews
2012-04-17 21:30:57.997749 I Loading en_us translation for module
mythweather
2012-04-17 21:30:58.032048 N Found mainmenu.xml for theme 'Willi'
2012-04-17 21:30:58.117823 I MythCoreContext: Connecting to backend
server: x.x.x..x:6543 (try 1 of 1)
2012-04-17 21:30:58.120088 I Using protocol version 72
2012-04-17 21:31:04.676673 I Bonjour: Service registration complete: name
'Mythfrontend on FE.local' type '_mythfrontend._tcp.' domain: 'local.'
2012-04-17 21:32:10.040341 N Resuming idle timer
2012-04-17 21:32:10.045061 N Resuming idle timer
2012-04-17 21:32:10.051363 I Bonjour: De-registering service
'_mythfrontend._tcp.' on 'Mythfrontend on FE.local'
2012-04-17 21:32:10.052111 I AirPay: Cleaning up.
2012-04-17 21:32:10.052298 I Bonjour: De-registering service
'_airplay._tcp.' on 'MythTV on FE.local'
2012-04-17 21:32:10.055843 I Deleting UPnP client...
2012-04-17 21:32:10.607894 I Waiting for threads to exit.
[root [at] F ~]#
----------------------------------------------------------

On Tue, Apr 17, 2012 at 9:17 PM, Jean-Yves Avenard <jyavenard [at] gmail>wrote:

> On 18 April 2012 11:29, A Desai <ashu.desai [at] gmail> wrote:
> > This is what I see when I turn on my Frontend:
> >
> > (On a separate note, it somehow takes OpenGL as the default painter, so I
> > have to force it to use QT via CLI)
> >
> > --------------------------------------------
> >
> > [root [at] F ~]# export MYTHTV_AIRPLAY="1"
> >
> > [root [at] F ~]# mythfrontend -O ThemePainter=qt
> > 2012-04-17 20:18:21.014775 C mythfrontend version: fixes/0.25
> > [v0.25-17-g682e6f5] www.mythtv.org
>
> Where did you get your mythfrontend from, did you compile it yourself?
>
> You need to build with openssl dev installed
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users
>

--
http://about.me/adesai

jyavenard at gmail

Apr 17, 2012, 8:00 PM

Post #9 of 52 (1775 views)
Permalink

Re: How-to AirPlay question [In reply to]

On 18 April 2012 12:35, A Desai <ashu.desai [at] gmail> wrote:
> Yes, I compiled it - got it from� http://code.mythtv.org/trac
>
> I am no linux guru - I barely make it. I had openssl installed, i now have
> devel also installed.

It's obviously not compiled with RAOP...

the output of configure would help troubleshooting your problem
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users

ashu.desai at gmail

Apr 17, 2012, 8:02 PM

Post #10 of 52 (1774 views)
Permalink

Re: How-to AirPlay question [In reply to]

So should I "recompile" the whole thing?

Just to be on same page -- go to mythplugins (under mythtv), do a
distclean, do a ./configure --prefix=/usr and then make, make install.

Is this what I am supposed to do?

Regards,
Ash

On Tue, Apr 17, 2012 at 10:00 PM, Jean-Yves Avenard <jyavenard [at] gmail>wrote:

> On 18 April 2012 12:35, A Desai <ashu.desai [at] gmail> wrote:
> > Yes, I compiled it - got it from http://code.mythtv.org/trac
> >
> > I am no linux guru - I barely make it. I had openssl installed, i now
> have
> > devel also installed.
>
> It's obviously not compiled with RAOP...
>
> the output of configure would help troubleshooting your problem
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users
>

--
http://about.me/adesai

jyavenard at gmail

Apr 17, 2012, 8:22 PM

Post #11 of 52 (1769 views)
Permalink

Re: How-to AirPlay question [In reply to]

On 18 April 2012 13:02, A Desai <ashu.desai [at] gmail> wrote:
> So should I "recompile" the whole thing?
>
> Just to be on same page -- go to mythplugins (under mythtv), do a distclean,
> do a ./configure --prefix=/usr and then make, make install.

I just want to see the output of your configure command.
I'm not asking you to recompile yet (though you will have to)
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users

jk90090 at gmail

Apr 17, 2012, 8:22 PM

Post #12 of 52 (1765 views)
Permalink

Re: How-to AirPlay question [In reply to]

On 4/17/12 8:02 PM, A Desai wrote:
> So should I "recompile" the whole thing?
>
> Just to be on same page -- go to mythplugins (under mythtv), do a
> distclean, do a ./configure --prefix=/usr and then make, make install.
>
> Is this what I am supposed to do?
>
> Regards,
> Ash
>
Yes, recompile after you've installed the openssl dev package.

-JK
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users

ashu.desai at gmail

Apr 17, 2012, 9:43 PM

Post #13 of 52 (1766 views)
Permalink

Re: How-to AirPlay question [In reply to]

how do I get output of the configure command? Do you mean the list of
plugins it says it installed? If so, here it is:

[root [at] F mythplugins]# ./configure --prefix=/usr
Disabling MythZoneMinder. Requires mysql/mysql.h header

Configuration settings:

qmake /usr/lib/qt47/bin/qmake

MythArchive plugin will be built
MythBrowser plugin will be built
MythGallery plugin will be built
MythGame plugin will be built
MythMusic plugin will be built
MythNetvision plugin will be built
MythNews plugin will be built
MythWeather plugin will be built
MythZoneMinder plugin will not be built
OpenGL support will be included in MythGallery
EXIF support will be included in MythGallery
Dcraw support will be included in MythGallery
libcdio support will be included in MythMusic
FFTW support will not be included in MythMusic

I have done a "make distclean" and then a "./configure --prefix=/usr" and
"make/make install" again. Still same thing. I do not see a RAOP message of
any kind...

Ash

On Tue, Apr 17, 2012 at 10:22 PM, Jean-Yves Avenard <jyavenard [at] gmail>wrote:

> On 18 April 2012 13:02, A Desai <ashu.desai [at] gmail> wrote:
> > So should I "recompile" the whole thing?
> >
> > Just to be on same page -- go to mythplugins (under mythtv), do a
> distclean,
> > do a ./configure --prefix=/usr and then make, make install.
>
> I just want to see the output of your configure command.
> I'm not asking you to recompile yet (though you will have to)
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users
>

--
http://about.me/adesai

jyavenard at gmail

Apr 17, 2012, 10:01 PM

Post #14 of 52 (1769 views)
Permalink

Re: How-to AirPlay question [In reply to]

On 18 April 2012 14:43, A Desai <ashu.desai [at] gmail> wrote:
> how do I get output of the configure command? Do you mean the list of
> plugins it says it installed? If so, here it is:
>
> [root [at] F mythplugins]# ./configure --prefix=/usr
> Disabling MythZoneMinder. Requires mysql/mysql.h header

sigh..

not the configure of the plugins of course!
the main mythtv configure!
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users

ashu.desai at gmail

Apr 18, 2012, 6:07 AM

Post #15 of 52 (1749 views)
Permalink

Re: How-to AirPlay question [In reply to]

That's why I mentioned - I need to be told - I am no linux champ here;
barely making it.

Nevertheless, here it is -- from "mythtv"

---------------------------------

[root [at] F mythtv]# !857
./configure --prefix=/usr --enable-dvb --enable-proc-opt --enable-vdpau
--enable
-vaapi
--enable-libmp3lame --enable-libx264 --enable-libvpx --enable-libxvid --e

nable-libass
Unknown option "--enable-libass".
See ./configure --help for available options.
[root [at] F mythtv]# ./configure --prefix=/usr --enable-dvb --enable-proc-opt
--ena
ble-vdpau
--enable-vaapi --enable-libmp3lame --enable-libx264 --enable-libvpx --

enable-libxvid
# Basic Settings
Compile type profile
Compiler cache symlink gcc
DistCC no
qmake /usr/lib/qt47/bin/qmake
install prefix /usr
runtime prefix /usr
CPU x86 x86_32 (model name : Intel(R) Atom(TM)
CPU
230 @ 1.60GHz)
yasm yes
MMX enabled yes
MMX2 enabled yes
3DNow! enabled yes
3DNow! extended enabled yes
SSE enabled yes
SSSE3 enabled yes
CMOV enabled yes

# Input Support
Joystick menu yes
lirc support yes
libCEC device support no [/usr/include]
Video4Linux sup. yes (v1 yes)
ivtv support yes
HD-PVR support yes
FireWire support no
DVB support yes [/usr/include]
DVB-S2 support yes
HDHomeRun support yes
Ceton support yes
IPTV support yes
ASI support no

# Sound Output Support
PulseAudio support no
OSS support yes
ALSA support yes
JACK support no
libfftw3 support no

# Video Output Support
x11 support yes
xrandr support yes
xv support yes
VDPAU support yes
VAAPI support yes
CrystalHD support no
OpenGL video yes
MHEG support yes
libass subtitle support no

# Misc Features
multi threaded libavcodec yes
libxml2 support yes [/usr/include/libxml2]
libdns_sd (Bonjour) yes
libcrypto yes
Frontend yes
Backend yes
OpenGL ES 2.0 no

# Bindings
bindings_perl yes
bindings_python yes
bindings_php yes

# External Codec Options
mp3lame yes
faac no
xvid yes
x264 yes
vpx yes

Creating libs/libmythbase/mythconfig.h and libs/libmythbase/mythconfig.mak
--------------------------------------------------------

Let me know if this is still not it.

Ash

On Wed, Apr 18, 2012 at 12:01 AM, Jean-Yves Avenard <jyavenard [at] gmail>wrote:

> On 18 April 2012 14:43, A Desai <ashu.desai [at] gmail> wrote:
> > how do I get output of the configure command? Do you mean the list of
> > plugins it says it installed? If so, here it is:
> >
> > [root [at] F mythplugins]# ./configure --prefix=/usr
> > Disabling MythZoneMinder. Requires mysql/mysql.h header
>
> sigh..
>
> not the configure of the plugins of course!
> the main mythtv configure!
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users
>

--
http://about.me/adesai

jyavenard at gmail

Apr 18, 2012, 6:28 AM

Post #16 of 52 (1751 views)
Permalink

Re: How-to AirPlay question [In reply to]

On 18 April 2012 23:07, A Desai <ashu.desai [at] gmail> wrote:
> That's why I mentioned - I need to be told - I am no linux champ here;
> barely making it.
>
> Nevertheless, here it is -- from "mythtv"
>
> ---------------------------------
>
> [root [at] F mythtv]# !857
> ./configure --prefix=/usr --enable-dvb --enable-proc-opt --enable-vdpau
> --enable
> � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �-vaapi
> --enable-libmp3lame --enable-libx264 --enable-libvpx --enable-libxvid --e
>
> � � � � � � � � � � � � � � � � � � � � � � � � �nable-libass
> Unknown option "--enable-libass".
> See ./configure --help for available options.

you do not have to use the --enable-vdpau, --enable-libass etc.. they
will be autodetected

> multi threaded libavcodec yes
> libxml2 support � � � � � yes [/usr/include/libxml2]
> libdns_sd (Bonjour) � � � yes
> libcrypto � � � � � � � � yes
> Frontend � � � � � � � � �yes
> Backend � � � � � � � � � yes
> OpenGL ES 2.0 � � � � � � no

Well, everything you need for RAOP is there...

I think you will save yourself a great deal of trouble if you simply
used a packaged version of mythtv. There are binary distributions (or
source for things like gentoo) for virtually of distributions out
there.

JY
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users

mythtv-users at lists

Apr 18, 2012, 6:44 AM

Post #17 of 52 (1743 views)
Permalink

Re: How-to AirPlay question [In reply to]

A Desai wrote:
> That's why I mentioned - I need to be told - I am no linux champ here;
> barely making it.

... and yet you try to compile it by yourself? There are plenty of
repositories out there for any distribution.
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users

ashu.desai at gmail

Apr 18, 2012, 7:37 AM

Post #18 of 52 (1746 views)
Permalink

Re: How-to AirPlay question [In reply to]

My friend who also has Myth helps me with issues. I started compiling this
myself in the hope to learn a bit more about linux. However, that is
besides the point. For some reason, even though I have got the fixes/0.25
and compiled it per instructions, something is not working - which is why I
need help.

Thanks,

Ash

On Wed, Apr 18, 2012 at 8:44 AM, Thomas Boehm <mythtv-users [at] lists
> wrote:

> A Desai wrote:
> > That's why I mentioned - I need to be told - I am no linux champ here;
> > barely making it.
>
> ... and yet you try to compile it by yourself? There are plenty of
> repositories out there for any distribution.
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users
>

--
http://about.me/adesai

jk90090 at gmail

Apr 18, 2012, 7:45 AM

Post #19 of 52 (1745 views)
Permalink

Re: How-to AirPlay question [In reply to]

Did you rerun configure, without options, in the base source directory, and then run the make, and install yet?

On Apr 18, 2012, at 7:37 AM, A Desai <ashu.desai [at] gmail> wrote:

> My friend who also has Myth helps me with issues. I started compiling this myself in the hope to learn a bit more about linux. However, that is besides the point. For some reason, even though I have got the fixes/0.25 and compiled it per instructions, something is not working - which is why I need help.
>
> Thanks,
>
> Ash
>
>
>
> On Wed, Apr 18, 2012 at 8:44 AM, Thomas Boehm <mythtv-users [at] lists> wrote:
> A Desai wrote:
> > That's why I mentioned - I need to be told - I am no linux champ here;
> > barely making it.
>
> ... and yet you try to compile it by yourself? There are plenty of
> repositories out there for any distribution.
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users
>
>
>
> --
> http://about.me/adesai
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users

mythtv-users at lists

Apr 18, 2012, 7:52 AM

Post #20 of 52 (1743 views)
Permalink

Re: How-to AirPlay question [In reply to]

A Desai wrote:
> My friend who also has Myth helps me with issues. I started compiling
> this myself in the hope to learn a bit more about linux. However, that
> is besides the point. For some reason, even though I have got the
> fixes/0.25 and compiled it per instructions, something is not working -
> which is why I need help.

Please stop top posting. Trim the quote and write your message below.
Thanks.

I didn't want to offend you in any way. I just wanted to point out that
there are other and easier ways to install MythTV. Especially if the WAF
is important to you ;-) If you want to learn about linux, then that's a
valid reason...

I wouldn't describe me as a beginner nor as "linux champ", but I chose
to use the Mythbuntu repository, since the whole system has to run at
the end of the day when GF comes home ;-)

Thomas
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users

ashu.desai at gmail

Apr 18, 2012, 11:03 AM

Post #21 of 52 (1731 views)
Permalink

Re: How-to AirPlay question [In reply to]

On Wed, Apr 18, 2012 at 9:45 AM, Jk90090 <jk90090 [at] gmail> wrote:

> Did you rerun configure, without options, in the base source directory,
> and then run the make, and install yet?
>
>
> On Apr 18, 2012, at 7:37 AM, A Desai <ashu.desai [at] gmail> wrote:
>
> My friend who also has Myth helps me with issues. I started compiling this
> myself in the hope to learn a bit more about linux. However, that is
> besides the point. For some reason, even though I have got the fixes/0.25
> and compiled it per instructions, something is not working - which is why I
> need help.
>
> Thanks,
>
> Ash
>
>
>
> On Wed, Apr 18, 2012 at 8:44 AM, Thomas Boehm <
> mythtv-users [at] lists> wrote:
>
>> A Desai wrote:
>> > That's why I mentioned - I need to be told - I am no linux champ here;
>> > barely making it.
>>
>> ... and yet you try to compile it by yourself? There are plenty of
>> repositories out there for any distribution.
>> _______________________________________________
>> mythtv-users mailing list
>> mythtv-users [at] mythtv
>> http://www.mythtv.org/mailman/listinfo/mythtv-users
>>
>
>
> ==============================================

My apologies for top-posting. No offence taken as far as to why I am not
getting a packaged version. I have been doing this for 6 odd years now, and
slowly getting better. There was a time when I couldn't do jack unless my
friend here helped me out. Now I can do over 50% with this discussion forum
help. So I believe in the next 6 yrs, I should be able to get somewhere!!!
:)

I think the problem was that I did not do make/make install after
installing openssl-devel. I did that under mythplugins (now I know better -
plugins have nothing to do with the AirPlay).

I now see RAOP message - but since I am remote, and via XMING, I am not
sure what I should be seeing.

Just to be funky - I tried SSL VPNing in home on my iPhone, I believe
broadcast/multicast are enabled on my FW as well. But it doesn't see it. I
can only know once I get back home from work to see if it really works.

----------------

[root [at] F mythtv]# ./configure --prefix=/usr --enable-libmp3lame
--enable-libx264 --enable-libvpx --enable-libxvid --enable-nonfree
# Basic Settings
Compile type profile
Compiler cache symlink gcc
DistCC no
qmake /usr/lib/qt47/bin/qmake
install prefix /usr
runtime prefix /usr
CPU x86 x86_32 (model name : Intel(R) Atom(TM)
CPU 230 @ 1.60GHz)
yasm yes
MMX enabled yes
MMX2 enabled yes
3DNow! enabled yes
3DNow! extended enabled yes
SSE enabled yes
SSSE3 enabled yes
CMOV enabled no

# Input Support
Joystick menu yes
lirc support yes
libCEC device support no [/usr/include]
Video4Linux sup. yes (v1 yes)
ivtv support yes
HD-PVR support yes
FireWire support no
DVB support yes [/usr/include]
DVB-S2 support yes
HDHomeRun support yes
Ceton support yes
IPTV support yes
ASI support no

# Sound Output Support
PulseAudio support no
OSS support yes
ALSA support yes
JACK support no
libfftw3 support no

# Video Output Support
x11 support yes
xrandr support yes
xv support yes
VDPAU support yes
VAAPI support no
CrystalHD support no
OpenGL video yes
MHEG support yes
libass subtitle support no

# Misc Features
multi threaded libavcodec yes
libxml2 support yes [/usr/include/libxml2]
libdns_sd (Bonjour) yes
libcrypto yes
Frontend yes
Backend yes
OpenGL ES 2.0 no

# Bindings
bindings_perl yes
bindings_python yes
bindings_php yes

# External Codec Options
mp3lame yes
faac no
xvid yes
x264 yes
vpx yes

Creating libs/libmythbase/mythconfig.h and libs/libmythbase/mythconfig.mak

external/FFmpeg/libavutil/avconfig.h is unchanged
---------------------------------------------------------

Thank you for the help. Now for my remaining couple problems - but that on
another thread.

Appreciate your time/effort everyone.

Ash

--
http://about.me/adesai

ashu.desai at gmail

Apr 18, 2012, 5:56 PM

Post #22 of 52 (1724 views)
Permalink

Re: How-to AirPlay question [In reply to]

On Wed, Apr 18, 2012 at 1:03 PM, A Desai <ashu.desai [at] gmail> wrote:

>
> On Wed, Apr 18, 2012 at 9:45 AM, Jk90090 <jk90090 [at] gmail> wrote:
>
>> Did you rerun configure, without options, in the base source directory,
>> and then run the make, and install yet?
>>
>>
>> On Apr 18, 2012, at 7:37 AM, A Desai <ashu.desai [at] gmail> wrote:
>>
>> My friend who also has Myth helps me with issues. I started compiling
>> this myself in the hope to learn a bit more about linux. However, that is
>> besides the point. For some reason, even though I have got the fixes/0.25
>> and compiled it per instructions, something is not working - which is why I
>> need help.
>>
>> Thanks,
>>
>> Ash
>>
>>
>>
>> On Wed, Apr 18, 2012 at 8:44 AM, Thomas Boehm <
>> mythtv-users [at] lists> wrote:
>>
>>> A Desai wrote:
>>> > That's why I mentioned - I need to be told - I am no linux champ here;
>>> > barely making it.
>>>
>>> ... and yet you try to compile it by yourself? There are plenty of
>>> repositories out there for any distribution.
>>> _______________________________________________
>>> mythtv-users mailing list
>>> mythtv-users [at] mythtv
>>> http://www.mythtv.org/mailman/listinfo/mythtv-users
>>>
>>
>>
>> ==============================================
>
> My apologies for top-posting. No offence taken as far as to why I am not
> getting a packaged version. I have been doing this for 6 odd years now, and
> slowly getting better. There was a time when I couldn't do jack unless my
> friend here helped me out. Now I can do over 50% with this discussion forum
> help. So I believe in the next 6 yrs, I should be able to get somewhere!!!
> :)
>
> I think the problem was that I did not do make/make install after
> installing openssl-devel. I did that under mythplugins (now I know better -
> plugins have nothing to do with the AirPlay).
>
> I now see RAOP message - but since I am remote, and via XMING, I am not
> sure what I should be seeing.
>
> Just to be funky - I tried SSL VPNing in home on my iPhone, I believe
> broadcast/multicast are enabled on my FW as well. But it doesn't see it. I
> can only know once I get back home from work to see if it really works.
>
> ----------------
>
> [root [at] F mythtv]# ./configure --prefix=/usr --enable-libmp3lame
> --enable-libx264 --enable-libvpx --enable-libxvid --enable-nonfree
> # Basic Settings
> Compile type profile
> Compiler cache symlink gcc
> DistCC no
> qmake /usr/lib/qt47/bin/qmake
> install prefix /usr
> runtime prefix /usr
> CPU x86 x86_32 (model name : Intel(R)
> Atom(TM) CPU 230 @ 1.60GHz)
> yasm yes
> MMX enabled yes
> MMX2 enabled yes
> 3DNow! enabled yes
> 3DNow! extended enabled yes
> SSE enabled yes
> SSSE3 enabled yes
> CMOV enabled no
>
> # Input Support
> Joystick menu yes
> lirc support yes
> libCEC device support no [/usr/include]
> Video4Linux sup. yes (v1 yes)
> ivtv support yes
> HD-PVR support yes
> FireWire support no
> DVB support yes [/usr/include]
> DVB-S2 support yes
> HDHomeRun support yes
> Ceton support yes
> IPTV support yes
> ASI support no
>
> # Sound Output Support
> PulseAudio support no
> OSS support yes
> ALSA support yes
> JACK support no
> libfftw3 support no
>
> # Video Output Support
> x11 support yes
> xrandr support yes
> xv support yes
> VDPAU support yes
> VAAPI support no
> CrystalHD support no
> OpenGL video yes
> MHEG support yes
> libass subtitle support no
>
> # Misc Features
> multi threaded libavcodec yes
> libxml2 support yes [/usr/include/libxml2]
> libdns_sd (Bonjour) yes
> libcrypto yes
> Frontend yes
> Backend yes
> OpenGL ES 2.0 no
>
> # Bindings
> bindings_perl yes
> bindings_python yes
> bindings_php yes
>
> # External Codec Options
> mp3lame yes
> faac no
> xvid yes
> x264 yes
> vpx yes
>
> Creating libs/libmythbase/mythconfig.h and libs/libmythbase/mythconfig.mak
>
> external/FFmpeg/libavutil/avconfig.h is unchanged
> ---------------------------------------------------------
>
> Thank you for the help. Now for my remaining couple problems - but that on
> another thread.
>
> Appreciate your time/effort everyone.
>
> Ash
>
>
>
>
>
>
>
> --
> http://about.me/adesai
>

Still no airplay! :( It shows me that RAOP is registered, gives me the name
but I don't see any icon on my IOS devices. Help please...

Ash.

--
http://about.me/adesai

jon at whitear

Apr 18, 2012, 6:00 PM

Post #23 of 52 (1723 views)
Permalink

Re: How-to AirPlay question [In reply to]

> Still no airplay! :( It shows me that RAOP is registered, gives me
> the name but I don't see any icon on my IOS devices. Help please...

Can you give us the frontend log showing the registration etc?
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users

ashu.desai at gmail

Apr 18, 2012, 6:10 PM

Post #24 of 52 (1722 views)
Permalink

Re: How-to AirPlay question [In reply to]

On Wed, Apr 18, 2012 at 8:00 PM, Jon Whitear <jon [at] whitear> wrote:

> > Still no airplay! :( It shows me that RAOP is registered, gives me
> > the name but I don't see any icon on my IOS devices. Help please...
>
> Can you give us the frontend log showing the registration etc?
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users
>

2012-04-18 20:08:12.890286 I RAOP Device: Listening for connections on
port 5001
2012-04-18 20:08:12.892294 I Loading en_us translation for module
mythfrontend
2012-04-18 20:08:13.757076 I Bonjour: Service registration complete: name
'422a36382661 [at] MythTV on FE.local' type '_raop._tcp.' domain: 'local.'

--
http://about.me/adesai

jyavenard at gmail

Apr 18, 2012, 6:31 PM

Post #25 of 52 (1716 views)
Permalink

Re: How-to AirPlay question [In reply to]

On 19 April 2012 11:10, A Desai <ashu.desai [at] gmail> wrote:

> 2012-04-18 20:08:12.890286 I �RAOP Device: Listening for connections on port
> 5001
> 2012-04-18 20:08:12.892294 I �Loading en_us translation for module
> mythfrontend
> 2012-04-18 20:08:13.757076 I �Bonjour: Service registration complete: name
> '422a36382661 [at] MythTV on FE.local' type '_raop._tcp.' domain: 'local.'

You're cutting the logs too much

Make sure you update the source code to today's version.... it will
likely work better for you
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users

ashu.desai at gmail

Apr 18, 2012, 6:35 PM

Post #26 of 52 (899 views)
Permalink

Re: How-to AirPlay question [In reply to]

On Apr 18, 2012, at 8:31 PM, Jean-Yves Avenard <jyavenard [at] gmail> wrote:

> On 19 April 2012 11:10, A Desai <ashu.desai [at] gmail> wrote:
>
>> 2012-04-18 20:08:12.890286 I RAOP Device: Listening for connections on port
>> 5001
>> 2012-04-18 20:08:12.892294 I Loading en_us translation for module
>> mythfrontend
>> 2012-04-18 20:08:13.757076 I Bonjour: Service registration complete: name
>> '422a36382661 [at] MythTV on FE.local' type '_raop._tcp.' domain: 'local.'
>
> You're cutting the logs too much
>
> Make sure you update the source code to today's version.... it will
> likely work better for you
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users

If I update, I would have to recompile again, correct?

And will have to do so for backed as well to keep them in same version…?

Ash
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users

ashu.desai at gmail

Apr 18, 2012, 6:50 PM

Post #27 of 52 (909 views)
Permalink

Re: How-to AirPlay question [In reply to]

On Wed, Apr 18, 2012 at 8:35 PM, A Desai <ashu.desai [at] gmail> wrote:
>
>
>
> On Apr 18, 2012, at 8:31 PM, Jean-Yves Avenard <jyavenard [at] gmail> wrote:
>
> > On 19 April 2012 11:10, A Desai <ashu.desai [at] gmail> wrote:
> >
> >> 2012-04-18 20:08:12.890286 I �RAOP Device: Listening for connections on port
> >> 5001
> >> 2012-04-18 20:08:12.892294 I �Loading en_us translation for module
> >> mythfrontend
> >> 2012-04-18 20:08:13.757076 I �Bonjour: Service registration complete: name
> >> '422a36382661 [at] MythTV on FE.local' type '_raop._tcp.' domain: 'local.'
> >
> > You're cutting the logs too much
> >
> > Make sure you update the source code to today's version.... it will
> > likely work better for you
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users [at] mythtv
> > http://www.mythtv.org/mailman/listinfo/mythtv-users
>
> If I update, I would have to recompile again, correct?
>
> And will have to do so for backed as well to keep them in same version�?
>
> Ash

Here is the full output of the mythfrontend:

----------------------------------
[root [at] F ~]# export MYTHTV_AIRPLAY="1"
[root [at] F ~]# mythfrontend -v &
[1] 3016
[root [at] F ~]# 2012-04-18 19:53:26.457080 C� mythfrontend version:
fixes/0.25 [v0.25-17-g682e6f5] www.mythtv.org
2012-04-18 19:53:26.457207 N� Enabled verbose msgs:� general
2012-04-18 19:53:26.457351 N� Setting Log Level to LOG_INFO
2012-04-18 19:53:26.457583 I� Added logging to the console
2012-04-18 19:53:26.457651 I� Added database logging to table logging
2012-04-18 19:53:26.458000 N� Setting up SIGHUP handler
2012-04-18 19:53:26.458510 N� Using runtime prefix = /usr
2012-04-18 19:53:26.458643 N� Using configuration directory = /root/.mythtv
2012-04-18 19:53:26.459604 I� Assumed character encoding: en_US.utf8
2012-04-18 19:53:26.459674 W� This application expects to be running a
locale that specifies a UTF-8 codeset, and many features may behave
improperly with your current language settings. Please set the LC_ALL
or LC_CTYPE, and LANG variable(s) in the environment in which this
program is executed to include a UTF-8 codeset (such as
'en_US.UTF-8').
2012-04-18 19:53:26.462517 N� Empty LocalHostName.
2012-04-18 19:53:26.462584 I� Using localhost value of FE.local
2012-04-18 19:53:26.554269 N� Setting QT default locale to en_US
2012-04-18 19:53:26.554353 I� Current locale en_US
2012-04-18 19:53:26.554539 N� Reading locale defaults from
/usr/share/mythtv//locales/en_us.xml
2012-04-18 19:53:26.579009 I� Starting process manager
2012-04-18 19:53:26.579362 I� Starting IO manager (read)
2012-04-18 19:53:26.583223 I� Starting process signal handler
2012-04-18 19:53:26.583298 I� Starting IO manager (write)
2012-04-18 19:53:26.686973 I� ScreenSaverX11Private: DPMS is active.
2012-04-18 19:53:26.730866 N� Desktop video mode: 1920x1080 60.000 Hz
2012-04-18 19:53:26.791009 I� Listening on TCP 127.0.0.1:6547
2012-04-18 19:53:26.791543 I� Listening on TCP x.x.x.56:6547
2012-04-18 19:53:26.795015 I� Listening on TCP [0:0:0:0:0:0:0:1]:6547
2012-04-18 19:53:27.611214 I� AirPay: Created airplay objects.
2012-04-18 19:53:27.611949 I� Listening on TCP 127.0.0.1:5100
2012-04-18 19:53:27.612301 I� Listening on TCP x.x.x..56:5100
2012-04-18 19:53:27.612491 I� RAOP Device: Created RAOP device objects.
2012-04-18 19:53:27.614679 I� Listening on TCP 127.0.0.1:5000
2012-04-18 19:53:27.615605 I� Listening on TCP x.x.x..56:5000
2012-04-18 19:53:27.617206 I� Listening on TCP [0:0:0:0:0:0:0:1]:5100
2012-04-18 19:53:27.617324 I� AirPay: Listening for connections on port 5100
2012-04-18 19:53:27.621122 I� Loading en_us translation for module mythfrontend
2012-04-18 19:53:27.630867 I� Listening on TCP [0:0:0:0:0:0:0:1]:5000
2012-04-18 19:53:27.630941 I� RAOP Device: Listening for connections
on port 5000
2012-04-18 19:53:27.655159 E� LIRC: Failed to connect to Unix socket
'/var/run/lirc/lircd'
�� eno: No such file or directory (2)
2012-04-18 19:53:27.655385 E� JoystickMenuThread: Joystick disabled -
Failed to read /root/.mythtv/joystickmenurc
2012-04-18 19:53:27.657957 I� Binding to UDP 127.0.0.1:6948
2012-04-18 19:53:27.658246 I� Binding to UDP x.x.x.56:6948
2012-04-18 19:53:27.662677 I� Binding to UDP [0:0:0:0:0:0:0:1]:6948
2012-04-18 19:53:27.662998 I� Binding to UDP x.x.x..255:6948
2012-04-18 19:53:27.750756 W� Key Esc is bound to multiple actions in
context Main Menu.
2012-04-18 19:53:27.767115 I� Using Frameless Window
2012-04-18 19:53:27.767335 I� Using Full Screen Window
2012-04-18 19:53:28.100828 I� Trying the OpenGL painter
2012-04-18 19:53:28.135694 W� NVCtrl: OpenGL Sync to VBlank is disabled.
2012-04-18 19:53:28.135735 W� NVCtrl: For best results enable this in
NVidia settings or try running:
2012-04-18 19:53:28.135759 W� NVCtrl: nvidia-settings -a "SyncToVBlank=1"
2012-04-18 19:53:28.135847 W� NVCtrl: Alternatively try setting the
'__GL_SYNC_TO_VBLANK' environment variable.
2012-04-18 19:53:28.281487 I� OpenGL1: Fragment program support available
2012-04-18 19:53:28.281678 I� OpenGL: OpenGL vendor� : NVIDIA Corporation
2012-04-18 19:53:28.281699 I� OpenGL: OpenGL renderer: ION/PCI/SSE2
2012-04-18 19:53:28.281716 I� OpenGL: OpenGL version : 3.3.0 NVIDIA 280.13
2012-04-18 19:53:28.281746 I� OpenGL: Max texture size: 8192 x 8192
2012-04-18 19:53:28.281771 I� OpenGL: Max texture units: 4
2012-04-18 19:53:28.281821 I� OpenGL: Direct rendering: Yes
2012-04-18 19:53:28.281839 I� OpenGL: PixelBufferObject support available
2012-04-18 19:53:28.281854 I� OpenGL: Initialised MythRenderOpenGL
2012-04-18 19:53:28.514313 E� MythFontProperties: Failed to load
'Liberation Mono', got 'DejaVu Sans' instead
�� Location: /root/.mythtv/themes/Steppes/base.xml @ 20
�� Name: 'basemono'�� Type: 'fontdef'
2012-04-18 19:53:28.587865 E� MythFontProperties: Failed to load
'Liberation Mono', got 'DejaVu Sans' instead
�� Location: /root/.mythtv/themes/Steppes/base.xml @ 139
�� Name: 'mysmallmono'�� Type: 'fontdef'
2012-04-18 19:53:28.595356 I� Bonjour: Service registration complete:
name 'MythTV on FE.local' type '_airplay._tcp.' domain: 'local.'
2012-04-18 19:53:28.606197 I� Bonjour: Service registration complete:
name '583c4f495c21 [at] MythT on FE.local' type '_raop._tcp.' domain:
'local.'
2012-04-18 19:53:29.489660 I� Current MythTV Schema Version (DBSchemaVer): 1299
2012-04-18 19:53:30.103309 W� Key Esc is bound to multiple actions in
context Main Menu.
2012-04-18 19:53:30.319842 N� Registering Internal as a media playback plugin.
2012-04-18 19:53:30.451826 I� Loading en_us translation for module mytharchive
2012-04-18 19:53:30.465105 N� Registering WebBrowser as a media playback plugin.
2012-04-18 19:53:30.465319 I� Loading en_us translation for module mythbrowser
2012-04-18 19:53:30.517442 I� Loading en_us translation for module mythgallery
2012-04-18 19:53:30.533578 I� Loading en_us translation for module mythgame
2012-04-18 19:53:30.564446 I� Current MythMusic Schema Version
(MusicDBSchemaVer): 1019
2012-04-18 19:53:30.607664 I� Loading en_us translation for module mythmusic
2012-04-18 19:53:30.617122 I� Loading en_us translation for module mythnetvision
2012-04-18 19:53:30.630081 I� Loading en_us translation for module mythnews
2012-04-18 19:53:30.645593 I� Loading en_us translation for module mythweather
2012-04-18 19:53:30.674685 N� Found mainmenu.xml for theme 'Steppes'
2012-04-18 19:53:31.150092 I� Bonjour: Service registration complete:
name 'Mythfrontend on FE.local' type '_mythfrontend._tcp.' domain:
'local.'
2012-04-18 19:53:31.153084 I� MythCoreContext: Connecting to backend
server: x.x.x.55:6543 (try 1 of 1)
2012-04-18 19:53:31.154975 I� Using protocol version 72
2012-04-18 19:53:45.739890 I� Using protocol version 72
2012-04-18 19:53:45.743246 I� Using protocol version 72
2012-04-18 20:41:57.404846 N� Resuming idle timer
2012-04-18 20:41:57.409292 N� Resuming idle timer
2012-04-18 20:41:57.415132 I� Bonjour: De-registering service
'_mythfrontend._tcp.' on 'Mythfrontend on FE.local'
2012-04-18 20:41:57.415923 I� RAOP Device: Cleaning up.
2012-04-18 20:41:57.416109 I� Bonjour: De-registering service
'_raop._tcp.' on '583c4f495c21 [at] MythT on FE.local'
2012-04-18 20:41:57.418902 I� AirPay: Cleaning up.
2012-04-18 20:41:57.419094 I� Bonjour: De-registering service
'_airplay._tcp.' on 'MythTV on FE.local'
2012-04-18 20:41:57.422453 I� Deleting UPnP client...
2012-04-18 20:41:58.051729 I� OpenGL1: Deleting OpenGL Resources
2012-04-18 20:41:58.051941 I� OpenGL: Deleting OpenGL Resources

-------------------------------------------

--
http://about.me/adesai
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users

gary.buhrmaster at gmail

Apr 18, 2012, 6:54 PM

Post #28 of 52 (897 views)
Permalink

Re: How-to AirPlay question [In reply to]

On Thu, Apr 19, 2012 at 01:50, A Desai <ashu.desai [at] gmail> wrote:
....
> Here is the full output of the mythfrontend:

Perhaps a stupid question, but do you have a firewall
running on your frontend? It may be blocking network
connections.

Gary
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users

ashu.desai at gmail

Apr 18, 2012, 7:15 PM

Post #29 of 52 (901 views)
Permalink

Re: How-to AirPlay question [In reply to]

On Wed, Apr 18, 2012 at 8:54 PM, Gary Buhrmaster
<gary.buhrmaster [at] gmail>wrote:

> On Thu, Apr 19, 2012 at 01:50, A Desai <ashu.desai [at] gmail> wrote:
> ....
> > Here is the full output of the mythfrontend:
>
> Perhaps a stupid question, but do you have a firewall
> running on your frontend? It may be blocking network
> connections.
>
> Gary
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users
>

No, but I still went ahead and stopped iptables, selinux (already disabled)
and ip6tables.

Still nothing. I am not even sure what menu I need to be on in Mythtv while
doing this, but I definitely am not seeing any AirPlay icon on my iPhone or
my ipad (or iTunes - but the wiki says it's not on there anyways)

--
http://about.me/adesai

jyavenard at gmail

Apr 18, 2012, 7:22 PM

Post #30 of 52 (904 views)
Permalink

Re: How-to AirPlay question [In reply to]

On 19 April 2012 12:15, A Desai <ashu.desai [at] gmail> wrote:

> Still nothing. I am not even sure what menu I need to be on in Mythtv while
> doing this, but I definitely am not seeing any AirPlay icon on my iPhone or
> my ipad (or iTunes - but the wiki says it's not on there anyways)

Well, according to those logs ; you should.

Make sure the iPhone is on the same subnet as your frontend...

Otherwise, as far as mythtv is concerned, everything is as it should be
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users

ashu.desai at gmail

Apr 18, 2012, 8:22 PM

Post #31 of 52 (889 views)
Permalink

Re: How-to AirPlay question [In reply to]

On Apr 18, 2012, at 9:22 PM, Jean-Yves Avenard <jyavenard [at] gmail> wrote:

> On 19 April 2012 12:15, A Desai <ashu.desai [at] gmail> wrote:
>
>> Still nothing. I am not even sure what menu I need to be on in Mythtv while
>> doing this, but I definitely am not seeing any AirPlay icon on my iPhone or
>> my ipad (or iTunes - but the wiki says it's not on there anyways)
>
> Well, according to those logs ; you should.
>
> Make sure the iPhone is on the same subnet as your frontend...
>
> Otherwise, as far as mythtv is concerned, everything is as it should be
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users

I am on the same subnet. But nothing.
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users

ashu.desai at gmail

Apr 18, 2012, 8:49 PM

Post #32 of 52 (897 views)
Permalink

Re: How-to AirPlay question [In reply to]

On Wed, Apr 18, 2012 at 10:22 PM, A Desai <ashu.desai [at] gmail> wrote:
>
>
> On Apr 18, 2012, at 9:22 PM, Jean-Yves Avenard <jyavenard [at] gmail> wrote:
>
>> On 19 April 2012 12:15, A Desai <ashu.desai [at] gmail> wrote:
>>
>>> Still nothing. I am not even sure what menu I need to be on in Mythtv while
>>> doing this, but I definitely am not seeing any AirPlay icon on my iPhone or
>>> my ipad (or iTunes - but the wiki says it's not on there anyways)
>>
>> Well, according to those logs ; you should.
>>
>> Make sure the iPhone is on the same subnet as your frontend...
>>
>> Otherwise, as far as mythtv is concerned, everything is as it should be
>> _______________________________________________
>> mythtv-users mailing list
>> mythtv-users [at] mythtv
>> http://www.mythtv.org/mailman/listinfo/mythtv-users
>
> I am on the same subnet. But nothing.

Seems like some people are saying that if it's WPA-PSK2 on Wireless it
wouldn't work. I tried making it Open - just to test - but nothing...

https://discussions.apple.com/thread/3551360?start=0&tstart=0

--
http://about.me/adesai
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users

mythtv at theseekerr

Apr 18, 2012, 10:42 PM

Post #33 of 52 (888 views)
Permalink

Re: How-to AirPlay question [In reply to]

On Thu, Apr 19, 2012 at 1:49 PM, A Desai <ashu.desai [at] gmail> wrote:

> On Wed, Apr 18, 2012 at 10:22 PM, A Desai <ashu.desai [at] gmail> wrote:
> >
> >
> > On Apr 18, 2012, at 9:22 PM, Jean-Yves Avenard <jyavenard [at] gmail>
> wrote:
> >
> >> On 19 April 2012 12:15, A Desai <ashu.desai [at] gmail> wrote:
> >>
> >>> Still nothing. I am not even sure what menu I need to be on in Mythtv
> while
> >>> doing this, but I definitely am not seeing any AirPlay icon on my
> iPhone or
> >>> my ipad (or iTunes - but the wiki says it's not on there anyways)
> >>
> >> Well, according to those logs ; you should.
> >>
> >> Make sure the iPhone is on the same subnet as your frontend...
> >>
> >> Otherwise, as far as mythtv is concerned, everything is as it should be
> >>
> > I am on the same subnet. But nothing.
>
> Seems like some people are saying that if it's WPA-PSK2 on Wireless it
> wouldn't work. I tried making it Open - just to test - but nothing...
>
> https://discussions.apple.com/thread/3551360?start=0&tstart=0
>
>
Just out of curiosity, what version of iOS are you running on your devices?
I believe AirPlay streaming of videos wasn't implemented until 4.2.1 or
thereabouts. (This shouldn't prevent your devices from streaming audio to
MythFrontend, though, so I don't think it's actually the problem)

- Chris

ashu.desai at gmail

Apr 19, 2012, 5:15 AM

Post #34 of 52 (883 views)
Permalink

Re: How-to AirPlay question [In reply to]

On Apr 19, 2012, at 12:42 AM, Christopher Kerr <mythtv [at] theseekerr> wrote:

> On Thu, Apr 19, 2012 at 1:49 PM, A Desai <ashu.desai [at] gmail> wrote:
> On Wed, Apr 18, 2012 at 10:22 PM, A Desai <ashu.desai [at] gmail> wrote:
> >
> >
> > On Apr 18, 2012, at 9:22 PM, Jean-Yves Avenard <jyavenard [at] gmail> wrote:
> >
> >> On 19 April 2012 12:15, A Desai <ashu.desai [at] gmail> wrote:
> >>
> >>> Still nothing. I am not even sure what menu I need to be on in Mythtv while
> >>> doing this, but I definitely am not seeing any AirPlay icon on my iPhone or
> >>> my ipad (or iTunes - but the wiki says it's not on there anyways)
> >>
> >> Well, according to those logs ; you should.
> >>
> >> Make sure the iPhone is on the same subnet as your frontend...
> >>
> >> Otherwise, as far as mythtv is concerned, everything is as it should be
> >>
> > I am on the same subnet. But nothing.
>
> Seems like some people are saying that if it's WPA-PSK2 on Wireless it
> wouldn't work. I tried making it Open - just to test - but nothing...
>
> https://discussions.apple.com/thread/3551360?start=0&tstart=0
>
>
> Just out of curiosity, what version of iOS are you running on your devices? I believe AirPlay streaming of videos wasn't implemented until 4.2.1 or thereabouts. (This shouldn't prevent your devices from streaming audio to MythFrontend, though, so I don't think it's actually the problem)
>
> - Chris
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users

I am on the latest - on both iPad 2 & iPhone 4. Just to be clear - there is no place in myth we have to put our apple/iTunes id?

Ash

jk90090 at gmail

Apr 19, 2012, 11:33 AM

Post #35 of 52 (884 views)
Permalink

Re: How-to AirPlay question [In reply to]

On 4/18/12 10:42 PM, Christopher Kerr wrote:
>
>
> Just out of curiosity, what version of iOS are you running on your
> devices? I believe AirPlay streaming of videos wasn't implemented
> until 4.2.1 or thereabouts. (This shouldn't prevent your devices from
> streaming audio to MythFrontend, though, so I don't think it's
> actually the problem)
>
> - Chris
>
The MYTHTV_AIRPLAY="1" only tells the frontend to register a *second*
device, this second one being a 'Video' device, in the LAN broadcasts.
Without it, the audio-only device still will be registered.

-JK

jk90090 at gmail

Apr 19, 2012, 11:34 AM

Post #36 of 52 (877 views)
Permalink

Re: How-to AirPlay question [In reply to]

On 4/18/12 8:49 PM, A Desai wrote:
>
> Make sure the iPhone is on the same subnet as your frontend...
>
> Otherwise, as far as mythtv is concerned, everything is as it should be
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users
>> I am on the same subnet. But nothing.
> Seems like some people are saying that if it's WPA-PSK2 on Wireless it
> wouldn't work. I tried making it Open - just to test - but nothing...
>
> https://discussions.apple.com/thread/3551360?start=0&tstart=0
>
>
>
I'm on WPA-PSK2 and it's working fine (other than the audio dropouts I
mentioned on another thread of course), FYI.

-JK
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users

jk90090 at gmail

Apr 19, 2012, 11:35 AM

Post #37 of 52 (880 views)
Permalink

Re: How-to AirPlay question [In reply to]

On 4/19/12 5:15 AM, Ashu Desai wrote:
> I am on the latest - on both iPad 2 & iPhone 4. Just to be clear -
> there is no place in myth we have to put our apple/iTunes id?
>
> Ash
>
Nope. Airplay doesn't need/utilize apple ids.
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users

ashu.desai at gmail

Apr 19, 2012, 11:45 AM

Post #38 of 52 (881 views)
Permalink

Re: How-to AirPlay question [In reply to]

On Apr 19, 2012, at 1:33 PM, jk90090 <jk90090 [at] gmail> wrote:

> On 4/18/12 10:42 PM, Christopher Kerr wrote:
>>
>>
>>
>> Just out of curiosity, what version of iOS are you running on your devices? I believe AirPlay streaming of videos wasn't implemented until 4.2.1 or thereabouts. (This shouldn't prevent your devices from streaming audio to MythFrontend, though, so I don't think it's actually the problem)
>>
>> - Chris
>>
> The MYTHTV_AIRPLAY="1" only tells the frontend to register a *second* device, this second one being a 'Video' device, in the LAN broadcasts. Without it, the audio-only device still will be registered.
>
> -JK
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users

Do I have to give this export command every time I boot? Can I do some persistent command?

Thanks

Ash

gaberubin at gmail

Apr 19, 2012, 12:47 PM

Post #39 of 52 (873 views)
Permalink

Re: How-to AirPlay question [In reply to]

On Thu, Apr 19, 2012 at 11:45 AM, A Desai <ashu.desai [at] gmail> wrote:
>
>
> On Apr 19, 2012, at 1:33 PM, jk90090 <jk90090 [at] gmail> wrote:
>
> On 4/18/12 10:42 PM, Christopher Kerr wrote:
>
>
>
> Just out of�curiosity, what version of iOS are you running on your devices?
> I believe AirPlay streaming of videos wasn't implemented until 4.2.1 or
> thereabouts. (This shouldn't prevent your devices from streaming audio to
> MythFrontend, though, so I don't think it's actually the problem)
>
> - Chris
>
> The MYTHTV_AIRPLAY="1" only tells the frontend to register a *second*
> device, this second one being a 'Video' device, in the LAN broadcasts.
> Without it, the audio-only device still will be registered.
>
> -JK
>
> _______________________________________________
>
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users
>
>
> Do I have to give this export command every time I boot? Can I do some
> persistent command?
>
> Thanks
>
> Ash

I included this command in the script I use to startup mythup.
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users

jk90090 at gmail

Apr 19, 2012, 1:09 PM

Post #40 of 52 (872 views)
Permalink

Re: How-to AirPlay question [In reply to]

On 4/19/12 11:45 AM, A Desai wrote:
> The MYTHTV_AIRPLAY="1" only tells the frontend to register a *second*
> device, this second one being a 'Video' device, in the LAN
> broadcasts. Without it, the audio-only device still will be registered.
>>
>> -JK
>> _______________________________________________
>> mythtv-users mailing list
>> mythtv-users [at] mythtv <mailto:mythtv-users [at] mythtv>
>> http://www.mythtv.org/mailman/listinfo/mythtv-users
>
> Do I have to give this export command every time I boot? Can I do some
> persistent command?
>
> Thanks
>
> Ash
>
How are you starting mythfrontend? What distro are you running again?

-JK

ashu.desai at gmail

Apr 19, 2012, 1:11 PM

Post #41 of 52 (880 views)
Permalink

Re: How-to AirPlay question [In reply to]

On Thu, Apr 19, 2012 at 3:09 PM, jk90090 <jk90090 [at] gmail> wrote:
> On 4/19/12 11:45 AM, A Desai wrote:
>
> The MYTHTV_AIRPLAY="1" only tells the frontend to register a *second*
> device, this second one being a 'Video' device, in the LAN broadcasts.
> Without it, the audio-only device still will be registered.
>
>
> -JK
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users
>
>
> Do I have to give this export command every time I boot? Can I do some
> persistent command?
>
> Thanks
>
> Ash
>
> How are you starting mythfrontend?� What distro are you running again?
>
> -JK
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users
>

I am on CentOS 6 Final. I want to set it up so that it would
automatically start myth when I reboot; but currently it just comes up
in X mode; I open a terminal and give "mythfrontend -O
ThemePainter=qt" command.

(I can't just give "mythfrontend" command - I have opened another
thread -- it only displays blank page without menus - and tries
OpenGL)

--
http://about.me/adesai
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users

jason at mcleods

Apr 19, 2012, 1:12 PM

Post #42 of 52 (877 views)
Permalink

Re: How-to AirPlay question [In reply to]

You can add it to your /etc/environment file and it will be preserved on
reboot and set for all users.

On Thu, Apr 19, 2012 at 2:45 PM, A Desai <ashu.desai [at] gmail> wrote:

>
>
> On Apr 19, 2012, at 1:33 PM, jk90090 <jk90090 [at] gmail> wrote:
>
> On 4/18/12 10:42 PM, Christopher Kerr wrote:
>
>
>
> Just out of curiosity, what version of iOS are you running on your
> devices? I believe AirPlay streaming of videos wasn't implemented until
> 4.2.1 or thereabouts. (This shouldn't prevent your devices from streaming
> audio to MythFrontend, though, so I don't think it's actually the problem)
>
> - Chris
>
> The MYTHTV_AIRPLAY="1" only tells the frontend to register a *second*
> device, this second one being a 'Video' device, in the LAN broadcasts.
> Without it, the audio-only device still will be registered.
>
> -JK
>
> _______________________________________________
>
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users
>
>
> Do I have to give this export command every time I boot? Can I do some
> persistent command?
>
> Thanks
>
> Ash
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users
>
>

--
-Jason

I enjoy the massacre of ads. This sentence will slaughter ads without a
messy bloodbath.

ashu.desai at gmail

Apr 19, 2012, 2:05 PM

Post #43 of 52 (873 views)
Permalink

Re: How-to AirPlay question [In reply to]

On Thu, Apr 19, 2012 at 3:12 PM, Jason McLeod <jason [at] mcleods> wrote:
> You can add it to your /etc/environment file and it will be preserved on
> reboot and set for�all users.
>
>
> On Thu, Apr 19, 2012 at 2:45 PM, A Desai <ashu.desai [at] gmail> wrote:
>>
>>
>>
>> On Apr 19, 2012, at 1:33 PM, jk90090 <jk90090 [at] gmail> wrote:
>>
>> On 4/18/12 10:42 PM, Christopher Kerr wrote:
>>
>>
>>
>> Just out of�curiosity, what version of iOS are you running on your
>> devices? I believe AirPlay streaming of videos wasn't implemented until
>> 4.2.1 or thereabouts. (This shouldn't prevent your devices from streaming
>> audio to MythFrontend, though, so I don't think it's actually the problem)
>>
>> - Chris
>>
>> The MYTHTV_AIRPLAY="1" only tells the frontend to register a *second*
>> device, this second one being a 'Video' device, in the LAN broadcasts.
>> Without it, the audio-only device still will be registered.
>>
>> -JK
>>
>> _______________________________________________
>>
>> mythtv-users mailing list
>> mythtv-users [at] mythtv
>> http://www.mythtv.org/mailman/listinfo/mythtv-users
>>
>>
>> Do I have to give this export command every time I boot? Can I do some
>> persistent command?
>>
>> Thanks
>>
>> Ash
>>
>> _______________________________________________
>> mythtv-users mailing list
>> mythtv-users [at] mythtv
>> http://www.mythtv.org/mailman/listinfo/mythtv-users
>>
>
>
>
> --
> -Jason
>
> I enjoy the massacre of ads. This sentence will slaughter ads without a
> messy bloodbath.
>
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users
>

Thank you. The file /etc/environment was empty; I put in "export
MYTHTV_AIRPLAY="1" in it; saved it.

Appreciate it.

Regards,
Ash
--
http://about.me/adesai
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users

ashu.desai at gmail

Apr 19, 2012, 2:26 PM

Post #44 of 52 (868 views)
Permalink

Re: How-to AirPlay question [In reply to]

After installing "avahi-utils" - when I give "avahi-browse -a" command, I
now see airplay being enabled. On my iTunes, I do see now the icon. I am
not home, but this looks very promising.

I had to do "git pull", then just for the heck of it, i did a disctlean and
reconfigured, compiled - and it seems good so far. Will send out an updated
email once I am home.

A rather stupid question -- "Where" do I need to be on mythtv when I am
doing airplay? Like, do I need to be on "Play Music" when trying to do
music? Or "Watch Recordings" when I am trying to push a video from my
iPhone?

Thanks,

Ash

On Thu, Apr 19, 2012 at 4:05 PM, A Desai <ashu.desai [at] gmail> wrote:
> On Thu, Apr 19, 2012 at 3:12 PM, Jason McLeod <jason [at] mcleods> wrote:
>> You can add it to your /etc/environment file and it will be preserved on
>> reboot and set for all users.
>>
>>
>> On Thu, Apr 19, 2012 at 2:45 PM, A Desai <ashu.desai [at] gmail> wrote:
>>>
>>>
>>>
>>> On Apr 19, 2012, at 1:33 PM, jk90090 <jk90090 [at] gmail> wrote:
>>>
>>> On 4/18/12 10:42 PM, Christopher Kerr wrote:
>>>
>>>
>>>
>>> Just out of curiosity, what version of iOS are you running on your
>>> devices? I believe AirPlay streaming of videos wasn't implemented until
>>> 4.2.1 or thereabouts. (This shouldn't prevent your devices from
streaming
>>> audio to MythFrontend, though, so I don't think it's actually the
problem)
>>>
>>> - Chris
>>>
>>> The MYTHTV_AIRPLAY="1" only tells the frontend to register a *second*
>>> device, this second one being a 'Video' device, in the LAN broadcasts.
>>> Without it, the audio-only device still will be registered.
>>>
>>> -JK
>>>
>>> _______________________________________________
>>>
>>> mythtv-users mailing list
>>> mythtv-users [at] mythtv
>>> http://www.mythtv.org/mailman/listinfo/mythtv-users
>>>
>>>
>>> Do I have to give this export command every time I boot? Can I do some
>>> persistent command?
>>>
>>> Thanks
>>>
>>> Ash
>>>
>>> _______________________________________________
>>> mythtv-users mailing list
>>> mythtv-users [at] mythtv
>>> http://www.mythtv.org/mailman/listinfo/mythtv-users
>>>
>>
>>
>>
>> --
>> -Jason
>>
>> I enjoy the massacre of ads. This sentence will slaughter ads without a
>> messy bloodbath.
>>
>>
>> _______________________________________________
>> mythtv-users mailing list
>> mythtv-users [at] mythtv
>> http://www.mythtv.org/mailman/listinfo/mythtv-users
>>
>
>
> Thank you. The file /etc/environment was empty; I put in "export
> MYTHTV_AIRPLAY="1" in it; saved it.
>
> Appreciate it.
>
> Regards,
> Ash
> --
> http://about.me/adesai

--
http://about.me/adesai

ashu.desai at gmail

Apr 19, 2012, 2:27 PM

Post #45 of 52 (865 views)
Permalink

Re: How-to AirPlay question [In reply to]

On Thu, Apr 19, 2012 at 4:26 PM, A Desai <ashu.desai [at] gmail> wrote:

> After installing "avahi-utils" - when I give "avahi-browse -a" command, I
> now see airplay being enabled. On my iTunes, I do see now the icon. I am
> not home, but this looks very promising.
>
> I had to do "git pull", then just for the heck of it, i did a disctlean
> and reconfigured, compiled - and it seems good so far. Will send out an
> updated email once I am home.
>
> A rather stupid question -- "Where" do I need to be on mythtv when I am
> doing airplay? Like, do I need to be on "Play Music" when trying to do
> music? Or "Watch Recordings" when I am trying to push a video from my
> iPhone?
>
> Thanks,
>
> Ash
>
>
>
> On Thu, Apr 19, 2012 at 4:05 PM, A Desai <ashu.desai [at] gmail> wrote:
> > On Thu, Apr 19, 2012 at 3:12 PM, Jason McLeod <jason [at] mcleods> wrote:
> >> You can add it to your /etc/environment file and it will be preserved on
> >> reboot and set for all users.
> >>
> >>
> >> On Thu, Apr 19, 2012 at 2:45 PM, A Desai <ashu.desai [at] gmail> wrote:
> >>>
> >>>
> >>>
> >>> On Apr 19, 2012, at 1:33 PM, jk90090 <jk90090 [at] gmail> wrote:
> >>>
> >>> On 4/18/12 10:42 PM, Christopher Kerr wrote:
> >>>
> >>>
> >>>
> >>> Just out of curiosity, what version of iOS are you running on your
> >>> devices? I believe AirPlay streaming of videos wasn't implemented until
> >>> 4.2.1 or thereabouts. (This shouldn't prevent your devices from
> streaming
> >>> audio to MythFrontend, though, so I don't think it's actually the
> problem)
> >>>
> >>> - Chris
> >>>
> >>> The MYTHTV_AIRPLAY="1" only tells the frontend to register a *second*
> >>> device, this second one being a 'Video' device, in the LAN broadcasts.
> >>> Without it, the audio-only device still will be registered.
> >>>
> >>> -JK
> >>>
> >>> _______________________________________________
> >>>
> >>> mythtv-users mailing list
> >>> mythtv-users [at] mythtv
> >>> http://www.mythtv.org/mailman/listinfo/mythtv-users
> >>>
> >>>
> >>> Do I have to give this export command every time I boot? Can I do some
> >>> persistent command?
> >>>
> >>> Thanks
> >>>
> >>> Ash
> >>>
> >>> _______________________________________________
> >>> mythtv-users mailing list
> >>> mythtv-users [at] mythtv
> >>> http://www.mythtv.org/mailman/listinfo/mythtv-users
> >>>
> >>
> >>
> >>
> >> --
> >> -Jason
> >>
> >> I enjoy the massacre of ads. This sentence will slaughter ads without a
> >> messy bloodbath.
> >>
> >>
> >> _______________________________________________
> >> mythtv-users mailing list
> >> mythtv-users [at] mythtv
> >> http://www.mythtv.org/mailman/listinfo/mythtv-users
> >>
> >
> >
> > Thank you. The file /etc/environment was empty; I put in "export
> > MYTHTV_AIRPLAY="1" in it; saved it.
> >
> > Appreciate it.
> >
> > Regards,
> > Ash
> > --
> > http://about.me/adesai
>
>
>
> --
> http://about.me/adesai
>
>
Oops, SORRY for top posting. Totally un-intentional..

--
http://about.me/adesai

ashu.desai at gmail

Apr 19, 2012, 6:46 PM

Post #46 of 52 (863 views)
Permalink

Re: How-to AirPlay question [In reply to]

On Thu, Apr 19, 2012 at 4:27 PM, A Desai <ashu.desai [at] gmail> wrote:

>
>
> On Thu, Apr 19, 2012 at 4:26 PM, A Desai <ashu.desai [at] gmail> wrote:
>
>> After installing "avahi-utils" - when I give "avahi-browse -a" command, I
>> now see airplay being enabled. On my iTunes, I do see now the icon. I am
>> not home, but this looks very promising.
>>
>> I had to do "git pull", then just for the heck of it, i did a disctlean
>> and reconfigured, compiled - and it seems good so far. Will send out an
>> updated email once I am home.
>>
>> A rather stupid question -- "Where" do I need to be on mythtv when I am
>> doing airplay? Like, do I need to be on "Play Music" when trying to do
>> music? Or "Watch Recordings" when I am trying to push a video from my
>> iPhone?
>>
>> Thanks,
>>
>> Ash
>>
>>
>>
>> On Thu, Apr 19, 2012 at 4:05 PM, A Desai <ashu.desai [at] gmail> wrote:
>> > On Thu, Apr 19, 2012 at 3:12 PM, Jason McLeod <jason [at] mcleods> wrote:
>> >> You can add it to your /etc/environment file and it will be preserved
>> on
>> >> reboot and set for all users.
>> >>
>> >>
>> >> On Thu, Apr 19, 2012 at 2:45 PM, A Desai <ashu.desai [at] gmail> wrote:
>> >>>
>> >>>
>> >>>
>> >>> On Apr 19, 2012, at 1:33 PM, jk90090 <jk90090 [at] gmail> wrote:
>> >>>
>> >>> On 4/18/12 10:42 PM, Christopher Kerr wrote:
>> >>>
>> >>>
>> >>>
>> >>> Just out of curiosity, what version of iOS are you running on your
>> >>> devices? I believe AirPlay streaming of videos wasn't implemented
>> until
>> >>> 4.2.1 or thereabouts. (This shouldn't prevent your devices from
>> streaming
>> >>> audio to MythFrontend, though, so I don't think it's actually the
>> problem)
>> >>>
>> >>> - Chris
>> >>>
>> >>> The MYTHTV_AIRPLAY="1" only tells the frontend to register a *second*
>> >>> device, this second one being a 'Video' device, in the LAN broadcasts.
>> >>> Without it, the audio-only device still will be registered.
>> >>>
>> >>> -JK
>> >>>
>> >>> _______________________________________________
>> >>>
>> >>> mythtv-users mailing list
>> >>> mythtv-users [at] mythtv
>> >>> http://www.mythtv.org/mailman/listinfo/mythtv-users
>> >>>
>> >>>
>> >>> Do I have to give this export command every time I boot? Can I do some
>> >>> persistent command?
>> >>>
>> >>> Thanks
>> >>>
>> >>> Ash
>> >>>
>> >>> _______________________________________________
>> >>> mythtv-users mailing list
>> >>> mythtv-users [at] mythtv
>> >>> http://www.mythtv.org/mailman/listinfo/mythtv-users
>> >>>
>> >>
>> >>
>> >>
>> >> --
>> >> -Jason
>> >>
>> >> I enjoy the massacre of ads. This sentence will slaughter ads without a
>> >> messy bloodbath.
>> >>
>> >>
>> >> _______________________________________________
>> >> mythtv-users mailing list
>> >> mythtv-users [at] mythtv
>> >> http://www.mythtv.org/mailman/listinfo/mythtv-users
>> >>
>> >
>> >
>> > Thank you. The file /etc/environment was empty; I put in "export
>> > MYTHTV_AIRPLAY="1" in it; saved it.
>> >
>> > Appreciate it.
>> >
>> > Regards,
>> > Ash
>> > --
>> > http://about.me/adesai
>>
>>
>>
>> --
>> http://about.me/adesai
>>
>>
> Oops, SORRY for top posting. Totally un-intentional..
>
> --
> http://about.me/adesai
>

No go with AirPlay. I can see the icon on my iTunes (but that doesn't work)
-- however nothing on iPhone :(

---------------------

[root [at] F ~]# avahi-browse -a
+ eth0 IPv4 6b5c6e62485a [at] MythT on FE.local AirTunes Remote
Audio local
+ eth0 IPv4 MythTV on FE.local _airplay._tcp
local
+ eth0 IPv4 Mythfrontend on FE.local
_mythfrontend._tcp local
+ eth0 IPv4 SFTP File Transfer on dell2850 SFTP File
Transfer local
+ eth0 IPv4 root's remote desktop VNC Remote Access
local
+ eth0 IPv4 root's remote desktop on FE.local VNC Remote Access
local
+ eth0 IPv4 dell2850 [00:11:43:e5:c8:0e] Workstation
local
+ eth0 IPv4 mythtv [00:06:4f:41:2b:1f] Workstation
local
+ eth0 IPv4 FE [00:01:2e:26:0d:eb] Workstation
local
+ eth0 IPv4 mythtv SSH Remote
Terminal local
+ eth0 IPv4 FE SSH Remote
Terminal local

------------------------------------------

I restarted my iPhone like 5 times, restarted avahi-daemon. Nothing.

--
http://about.me/adesai

ashu.desai at gmail

Apr 19, 2012, 8:58 PM

Post #47 of 52 (863 views)
Permalink

Re: How-to AirPlay question [In reply to]

On Thu, Apr 19, 2012 at 8:46 PM, A Desai <ashu.desai [at] gmail> wrote:

>
>
> On Thu, Apr 19, 2012 at 4:27 PM, A Desai <ashu.desai [at] gmail> wrote:
>
>>
>>
>> On Thu, Apr 19, 2012 at 4:26 PM, A Desai <ashu.desai [at] gmail> wrote:
>>
>>> After installing "avahi-utils" - when I give "avahi-browse -a" command,
>>> I now see airplay being enabled. On my iTunes, I do see now the icon. I am
>>> not home, but this looks very promising.
>>>
>>> I had to do "git pull", then just for the heck of it, i did a disctlean
>>> and reconfigured, compiled - and it seems good so far. Will send out an
>>> updated email once I am home.
>>>
>>> A rather stupid question -- "Where" do I need to be on mythtv when I am
>>> doing airplay? Like, do I need to be on "Play Music" when trying to do
>>> music? Or "Watch Recordings" when I am trying to push a video from my
>>> iPhone?
>>>
>>> Thanks,
>>>
>>> Ash
>>>
>>>
>>>
>>> On Thu, Apr 19, 2012 at 4:05 PM, A Desai <ashu.desai [at] gmail> wrote:
>>> > On Thu, Apr 19, 2012 at 3:12 PM, Jason McLeod <jason [at] mcleods>
>>> wrote:
>>> >> You can add it to your /etc/environment file and it will be preserved
>>> on
>>> >> reboot and set for all users.
>>> >>
>>> >>
>>> >> On Thu, Apr 19, 2012 at 2:45 PM, A Desai <ashu.desai [at] gmail>
>>> wrote:
>>> >>>
>>> >>>
>>> >>>
>>> >>> On Apr 19, 2012, at 1:33 PM, jk90090 <jk90090 [at] gmail> wrote:
>>> >>>
>>> >>> On 4/18/12 10:42 PM, Christopher Kerr wrote:
>>> >>>
>>> >>>
>>> >>>
>>> >>> Just out of curiosity, what version of iOS are you running on your
>>> >>> devices? I believe AirPlay streaming of videos wasn't implemented
>>> until
>>> >>> 4.2.1 or thereabouts. (This shouldn't prevent your devices from
>>> streaming
>>> >>> audio to MythFrontend, though, so I don't think it's actually the
>>> problem)
>>> >>>
>>> >>> - Chris
>>> >>>
>>> >>> The MYTHTV_AIRPLAY="1" only tells the frontend to register a *second*
>>> >>> device, this second one being a 'Video' device, in the LAN
>>> broadcasts.
>>> >>> Without it, the audio-only device still will be registered.
>>> >>>
>>> >>> -JK
>>> >>>
>>> >>> _______________________________________________
>>> >>>
>>> >>> mythtv-users mailing list
>>> >>> mythtv-users [at] mythtv
>>> >>> http://www.mythtv.org/mailman/listinfo/mythtv-users
>>> >>>
>>> >>>
>>> >>> Do I have to give this export command every time I boot? Can I do
>>> some
>>> >>> persistent command?
>>> >>>
>>> >>> Thanks
>>> >>>
>>> >>> Ash
>>> >>>
>>> >>> _______________________________________________
>>> >>> mythtv-users mailing list
>>> >>> mythtv-users [at] mythtv
>>> >>> http://www.mythtv.org/mailman/listinfo/mythtv-users
>>> >>>
>>> >>
>>> >>
>>> >>
>>> >> --
>>> >> -Jason
>>> >>
>>> >> I enjoy the massacre of ads. This sentence will slaughter ads without
>>> a
>>> >> messy bloodbath.
>>> >>
>>> >>
>>> >> _______________________________________________
>>> >> mythtv-users mailing list
>>> >> mythtv-users [at] mythtv
>>> >> http://www.mythtv.org/mailman/listinfo/mythtv-users
>>> >>
>>> >
>>> >
>>> > Thank you. The file /etc/environment was empty; I put in "export
>>> > MYTHTV_AIRPLAY="1" in it; saved it.
>>> >
>>> > Appreciate it.
>>> >
>>> > Regards,
>>> > Ash
>>> > --
>>> > http://about.me/adesai
>>>
>>>
>>>
>>> --
>>> http://about.me/adesai
>>>
>>>
>> Oops, SORRY for top posting. Totally un-intentional..
>>
>> --
>> http://about.me/adesai
>>
>
>
> No go with AirPlay. I can see the icon on my iTunes (but that doesn't
> work) -- however nothing on iPhone :(
>
> ---------------------
>
> [root [at] F ~]# avahi-browse -a
> + eth0 IPv4 6b5c6e62485a [at] MythT on FE.local AirTunes Remote
> Audio local
> + eth0 IPv4 MythTV on FE.local _airplay._tcp
> local
> + eth0 IPv4 Mythfrontend on FE.local
> _mythfrontend._tcp local
> + eth0 IPv4 SFTP File Transfer on dell2850 SFTP File
> Transfer local
> + eth0 IPv4 root's remote desktop VNC Remote
> Access local
> + eth0 IPv4 root's remote desktop on FE.local VNC Remote
> Access local
> + eth0 IPv4 dell2850 [00:11:43:e5:c8:0e] Workstation
> local
> + eth0 IPv4 mythtv [00:06:4f:41:2b:1f] Workstation
> local
> + eth0 IPv4 FE [00:01:2e:26:0d:eb] Workstation
> local
> + eth0 IPv4 mythtv SSH Remote
> Terminal local
> + eth0 IPv4 FE SSH Remote
> Terminal local
>
> ------------------------------------------
>
> I restarted my iPhone like 5 times, restarted avahi-daemon. Nothing.
>
>
> --
> http://about.me/adesai
>

Someone asked me the output of "netstat -ln" -- here it is:

-------------------------------

[root [at] F ~]# netstat -ln
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address
State
tcp 0 0 x.x.x.56:5000 0.0.0.0:*
LISTEN
tcp 0 0 127.0.0.1:5000 0.0.0.0:*
LISTEN
tcp 0 0 x.x.x.56:5100 0.0.0.0:*
LISTEN
tcp 0 0 127.0.0.1:5100 0.0.0.0:*
LISTEN
tcp 0 0 0.0.0.0:111 0.0.0.0:*
LISTEN
tcp 0 0 x.x.x.56:6547 0.0.0.0:*
LISTEN
tcp 0 0 127.0.0.1:6547 0.0.0.0:*
LISTEN
tcp 0 0 0.0.0.0:22 0.0.0.0:*
LISTEN
tcp 0 0 127.0.0.1:25 0.0.0.0:*
LISTEN
tcp 0 0 127.0.0.1:6010 0.0.0.0:*
LISTEN
tcp 0 0 0.0.0.0:59771 0.0.0.0:*
LISTEN
tcp 0 0 ::1:5000 :::*
LISTEN
tcp 0 0 ::1:5100 :::*
LISTEN
tcp 0 0 :::5900 :::*
LISTEN
tcp 0 0 :::111 :::*
LISTEN
tcp 0 0 :::47345 :::*
LISTEN
tcp 0 0 ::1:6547 :::*
LISTEN
tcp 0 0 :::22 :::*
LISTEN
tcp 0 0 ::1:6010 :::*
LISTEN
udp 0 0 0.0.0.0:60550 0.0.0.0:*
udp 0 0 0.0.0.0:6549 0.0.0.0:*
udp 0 0 x.x.x.255:6948 0.0.0.0:*
udp 0 0 x.x.x.56:6948 0.0.0.0:*
udp 0 0 127.0.0.1:6948 0.0.0.0:*
udp 0 0 0.0.0.0:945 0.0.0.0:*
udp 0 0 0.0.0.0:45151 0.0.0.0:*
udp 0 0 0.0.0.0:5353 0.0.0.0:*
udp 0 0 255.255.255.255:1900 0.0.0.0:*
udp 0 0 239.255.255.250:1900 0.0.0.0:*
udp 0 0 0.0.0.0:111 0.0.0.0:*
udp 0 0 x.x.x.56:123 0.0.0.0:*
udp 0 0 127.0.0.1:123 0.0.0.0:*
udp 0 0 0.0.0.0:123 0.0.0.0:*
udp 0 0 0.0.0.0:1021 0.0.0.0:*
udp 0 0 ::1:6948 :::*
udp 0 0 :::945 :::*
udp 0 0 :::35659 :::*
udp 0 0 :::111 :::*
udp 0 0 fe80::201:2eff:fe26:deb:123 :::*
udp 0 0 ::1:123 :::*
udp 0 0 :::123 :::*
Active UNIX domain sockets (only servers)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 17679
@/tmp/.ICE-unix/3479
unix 2 [ ACC ] STREAM LISTENING 10470
/var/run/abrt/abrt.socket
unix 2 [ ACC ] STREAM LISTENING 18959 /tmp/.esd-0/socket
unix 2 [ ACC ] STREAM LISTENING 18963
/root/.pulse/bbb2e91b19afb1abad1634e90000001c-runtime/native
unix 2 [ ACC ] STREAM LISTENING 10386 private/proxywrite
unix 2 [ ACC ] STREAM LISTENING 10390 private/smtp
unix 2 [ ACC ] STREAM LISTENING 10394 private/relay
unix 2 [ ACC ] STREAM LISTENING 17921
/tmp/orbit-root/linc-d97-0-d3f319b563ca
unix 2 [ ACC ] STREAM LISTENING 10398 public/showq
unix 2 [ ACC ] STREAM LISTENING 10402 private/error
unix 2 [ ACC ] STREAM LISTENING 10406 private/retry
unix 2 [ ACC ] STREAM LISTENING 10410 private/discard
unix 2 [ ACC ] STREAM LISTENING 10414 private/local
unix 2 [ ACC ] STREAM LISTENING 17639
@/tmp/dbus-jEA3gWyqZA
unix 2 [ ACC ] STREAM LISTENING 18014
/tmp/orbit-root/linc-d8e-0-48129efe897e0
unix 2 [ ACC ] STREAM LISTENING 10347 public/cleanup
unix 2 [ ACC ] STREAM LISTENING 18018
/tmp/keyring-qTaAm6/socket.ssh
unix 2 [ ACC ] STREAM LISTENING 6860
@/com/ubuntu/upstart
unix 2 [ ACC ] STREAM LISTENING 9717
@/var/run/hald/dbus-F5fbsjHLE5
unix 2 [ ACC ] STREAM LISTENING 10898
@/tmp/gdm-greeter-wEDMcBMG
unix 2 [ ACC ] STREAM LISTENING 10828 @/tmp/.X11-unix/X0
unix 2 [ ACC ] STREAM LISTENING 9051
/var/run/dbus/system_bus_socket
unix 2 [ ACC ] STREAM LISTENING 17315
@/tmp/gdm-session-uXvgbcdU
unix 2 [ ACC ] STREAM LISTENING 9722
@/var/run/hald/dbus-vwwfPHRYj4
unix 2 [ ACC ] STREAM LISTENING 8935
/var/run/rpcbind.sock
unix 2 [ ACC ] STREAM LISTENING 10418 private/virtual
unix 2 [ ACC ] STREAM LISTENING 10422 private/lmtp
unix 2 [ ACC ] STREAM LISTENING 10426 private/anvil
unix 2 [ ACC ] STREAM LISTENING 10430 private/scache
unix 2 [ ACC ] STREAM LISTENING 21113
/var/run/avahi-daemon/socket
unix 2 [ ACC ] STREAM LISTENING 18217
/tmp/orbit-root/linc-dc9-0-58ea911bee890
unix 2 [ ACC ] STREAM LISTENING 9687
/var/run/acpid.socket
unix 2 [ ACC ] STREAM LISTENING 21450
/tmp/orbit-root/linc-f5b-0-49454d2e9009f
unix 2 [ ACC ] STREAM LISTENING 17394
/tmp/keyring-qTaAm6/socket
unix 2 [ ACC ] STREAM LISTENING 18262
/tmp/orbit-root/linc-dca-0-35dee0f21d046
unix 2 [ ACC ] STREAM LISTENING 18405
/tmp/orbit-root/linc-dcd-0-747ffaf1671e2
unix 2 [ ACC ] STREAM LISTENING 19072
/tmp/orbit-root/linc-dea-0-286aeba686118
unix 2 [ ACC ] STREAM LISTENING 18870
/tmp/orbit-root/linc-dcb-0-4fe13bfdc168d
unix 2 [ ACC ] STREAM LISTENING 18924
/tmp/orbit-root/linc-dd1-0-6476c38d227ab
unix 2 [ ACC ] STREAM LISTENING 19021
/tmp/orbit-root/linc-df2-0-23484e1a522f1
unix 2 [ ACC ] STREAM LISTENING 19046
/tmp/orbit-root/linc-de5-0-7839f01b6c218
unix 2 [ ACC ] STREAM LISTENING 19251
/tmp/orbit-root/linc-de9-0-1dac4d79baac2
unix 2 [ ACC ] STREAM LISTENING 19348
/tmp/orbit-root/linc-e01-0-36702fb052461
unix 2 [ ACC ] STREAM LISTENING 19356
/tmp/orbit-root/linc-dff-0-3348643355667
unix 2 [ ACC ] STREAM LISTENING 19378
/tmp/orbit-root/linc-ddd-0-16c98c3162f32
unix 2 [ ACC ] STREAM LISTENING 19386
/tmp/orbit-root/linc-de1-0-17c63a336404f
unix 2 [ ACC ] STREAM LISTENING 19403
/tmp/orbit-root/linc-ddb-0-7f46b3d66ae0f
unix 2 [ ACC ] STREAM LISTENING 19428
/tmp/orbit-root/linc-e00-0-7e21a6e385067
unix 2 [ ACC ] STREAM LISTENING 19634
/tmp/orbit-root/linc-e13-0-497ece6a9ae84
unix 2 [ ACC ] STREAM LISTENING 18020
/tmp/keyring-qTaAm6/socket.pkcs11
unix 2 [ ACC ] STREAM LISTENING 10829 /tmp/.X11-unix/X0
unix 2 [ ACC ] STREAM LISTENING 17680 /tmp/.ICE-unix/3479
unix 2 [ ACC ] STREAM LISTENING 18044
/tmp/orbit-root/linc-db5-0-59922e56969b0
unix 2 [ ACC ] STREAM LISTENING 10354 private/tlsmgr
unix 2 [ ACC ] STREAM LISTENING 10358 private/rewrite
unix 2 [ ACC ] STREAM LISTENING 10362 private/bounce
unix 2 [ ACC ] STREAM LISTENING 10366 private/defer
unix 2 [ ACC ] STREAM LISTENING 10370 private/trace
unix 2 [ ACC ] STREAM LISTENING 10374 private/verify
unix 2 [ ACC ] STREAM LISTENING 10378 public/flush
unix 2 [ ACC ] STREAM LISTENING 10382 private/proxymap
unix 2 [ ACC ] STREAM LISTENING 17702
/tmp/orbit-root/linc-dae-0-5a1c388f4b7d4
------------------------------------------------------------

As it stands -- I do not see any airplay icon on my iphone 4 (current iOS)
nor iPad 2 (latest iOS). As soon as i turn on my iTunes, it does show me
the icon on it - although it doesn't work.

Thank you.

Ash

--
http://about.me/adesai

ashu.desai at gmail

May 3, 2012, 7:36 AM

Post #48 of 52 (713 views)
Permalink

Re: How-to AirPlay question [In reply to]

On Thu, Apr 19, 2012 at 10:58 PM, A Desai <ashu.desai [at] gmail> wrote:
>
>
> On Thu, Apr 19, 2012 at 8:46 PM, A Desai <ashu.desai [at] gmail> wrote:
>>
>>
>>
>> On Thu, Apr 19, 2012 at 4:27 PM, A Desai <ashu.desai [at] gmail> wrote:
>>>
>>>
>>>
>>> On Thu, Apr 19, 2012 at 4:26 PM, A Desai <ashu.desai [at] gmail> wrote:
>>>>
>>>> After installing "avahi-utils" - when I give "avahi-browse -a" command,
>>>> I now see airplay being enabled. On my iTunes, I do see now the icon. I am
>>>> not home, but this looks very promising.
>>>>
>>>> I had to do "git pull", then just for the heck of it, i did a disctlean
>>>> and reconfigured, compiled - and it seems good so far. Will send out an
>>>> updated email once I am home.
>>>>
>>>> A rather stupid question -- "Where" do I need to be on mythtv when I am
>>>> doing airplay? Like, do I need to be on "Play Music" when trying to do
>>>> music? Or "Watch Recordings" when I am trying to push a video from my
>>>> iPhone?
>>>>
>>>> Thanks,
>>>>
>>>> Ash
>>>>
>>>>
>>>>
>>>> On Thu, Apr 19, 2012 at 4:05 PM, A Desai <ashu.desai [at] gmail> wrote:
>>>> > On Thu, Apr 19, 2012 at 3:12 PM, Jason McLeod <jason [at] mcleods>
>>>> > wrote:
>>>> >> You can add it to your /etc/environment file and it will be preserved
>>>> >> on
>>>> >> reboot and set for�all users.
>>>> >>
>>>> >>
>>>> >> On Thu, Apr 19, 2012 at 2:45 PM, A Desai <ashu.desai [at] gmail>
>>>> >> wrote:
>>>> >>>
>>>> >>>
>>>> >>>
>>>> >>> On Apr 19, 2012, at 1:33 PM, jk90090 <jk90090 [at] gmail> wrote:
>>>> >>>
>>>> >>> On 4/18/12 10:42 PM, Christopher Kerr wrote:
>>>> >>>
>>>> >>>
>>>> >>>
>>>> >>> Just out of�curiosity, what version of iOS are you running on your
>>>> >>> devices? I believe AirPlay streaming of videos wasn't implemented
>>>> >>> until
>>>> >>> 4.2.1 or thereabouts. (This shouldn't prevent your devices from
>>>> >>> streaming
>>>> >>> audio to MythFrontend, though, so I don't think it's actually the
>>>> >>> problem)
>>>> >>>
>>>> >>> - Chris
>>>> >>>
>>>> >>> The MYTHTV_AIRPLAY="1" only tells the frontend to register a
>>>> >>> *second*
>>>> >>> device, this second one being a 'Video' device, in the LAN
>>>> >>> broadcasts.
>>>> >>> Without it, the audio-only device still will be registered.
>>>> >>>
>>>> >>> -JK
>>>> >>>
>>>> >>> _______________________________________________
>>>> >>>
>>>> >>> mythtv-users mailing list
>>>> >>> mythtv-users [at] mythtv
>>>> >>> http://www.mythtv.org/mailman/listinfo/mythtv-users
>>>> >>>
>>>> >>>
>>>> >>> Do I have to give this export command every time I boot? Can I do
>>>> >>> some
>>>> >>> persistent command?
>>>> >>>
>>>> >>> Thanks
>>>> >>>
>>>> >>> Ash
>>>> >>>
>>>> >>> _______________________________________________
>>>> >>> mythtv-users mailing list
>>>> >>> mythtv-users [at] mythtv
>>>> >>> http://www.mythtv.org/mailman/listinfo/mythtv-users
>>>> >>>
>>>> >>
>>>> >>
>>>> >>
>>>> >> --
>>>> >> -Jason
>>>> >>
>>>> >> I enjoy the massacre of ads. This sentence will slaughter ads without
>>>> >> a
>>>> >> messy bloodbath.
>>>> >>
>>>> >>
>>>> >> _______________________________________________
>>>> >> mythtv-users mailing list
>>>> >> mythtv-users [at] mythtv
>>>> >> http://www.mythtv.org/mailman/listinfo/mythtv-users
>>>> >>
>>>> >
>>>> >
>>>> > Thank you. The file /etc/environment was empty; I put in "export
>>>> > MYTHTV_AIRPLAY="1" in it; saved it.
>>>> >
>>>> > Appreciate it.
>>>> >
>>>> > Regards,
>>>> > Ash
>>>> > --
>>>> > http://about.me/adesai
>>>>
>>>>
>>>>
>>>> --
>>>> http://about.me/adesai
>>>>
>>>
>>> Oops, SORRY for top posting. Totally un-intentional..
>>>
>>> --
>>> http://about.me/adesai
>>
>>
>>
>> No go with AirPlay. I can see the icon on my iTunes (but that doesn't
>> work) -- however nothing on iPhone :(
>>
>> ---------------------
>>
>> [root [at] F ~]# avahi-browse -a
>> + eth0 IPv4 6b5c6e62485a [at] MythT on FE.local � � � � � � � AirTunes Remote
>> Audio local
>> + eth0 IPv4 MythTV on FE.local � � � � � � � � � � � � � �_airplay._tcp
>> � � �local
>> + eth0 IPv4 Mythfrontend on FE.local
>> �_mythfrontend._tcp � local
>> + eth0 IPv4 SFTP File Transfer on dell2850 � � � � � � � �SFTP File
>> Transfer � local
>> + eth0 IPv4 root's remote desktop � � � � � � � � � � � � VNC Remote
>> Access � �local
>> + eth0 IPv4 root's remote desktop on FE.local � � � � � � VNC Remote
>> Access � �local
>> + eth0 IPv4 dell2850 [00:11:43:e5:c8:0e] � � � � � � � � �Workstation
>> � � �local
>> + eth0 IPv4 mythtv [00:06:4f:41:2b:1f] � � � � � � � � � �Workstation
>> � � �local
>> + eth0 IPv4 FE [00:01:2e:26:0d:eb] � � � � � � � � � � � �Workstation
>> � � �local
>> + eth0 IPv4 mythtv � � � � � � � � � � � � � � � � � � � �SSH Remote
>> Terminal �local
>> + eth0 IPv4 FE � � � � � � � � � � � � � � � � � � � � � �SSH Remote
>> Terminal �local
>>
>> ------------------------------------------
>>
>> I restarted my iPhone like 5 times, restarted avahi-daemon. Nothing.
>>
>>
>> --
>> http://about.me/adesai
>
>
> Someone asked me the output of "netstat -ln" -- here it is:
>
> -------------------------------
>
> [root [at] F ~]# netstat -ln
> Active Internet connections (only servers)
> Proto Recv-Q Send-Q Local Address � � � � � � � Foreign Address
> State
> tcp � � � �0 � � �0 x.x.x.56:5000 � � � � � 0.0.0.0:*
> LISTEN
> tcp � � � �0 � � �0 127.0.0.1:5000 � � � � � � �0.0.0.0:*
> LISTEN
> tcp � � � �0 � � �0 x.x.x.56:5100 � � � � � 0.0.0.0:*
> LISTEN
> tcp � � � �0 � � �0 127.0.0.1:5100 � � � � � � �0.0.0.0:*
> LISTEN
> tcp � � � �0 � � �0 0.0.0.0:111 � � � � � � � � 0.0.0.0:*
> LISTEN
> tcp � � � �0 � � �0 x.x.x.56:6547 � � � � � 0.0.0.0:*
> LISTEN
> tcp � � � �0 � � �0 127.0.0.1:6547 � � � � � � �0.0.0.0:*
> LISTEN
> tcp � � � �0 � � �0 0.0.0.0:22 � � � � � � � � �0.0.0.0:*
> LISTEN
> tcp � � � �0 � � �0 127.0.0.1:25 � � � � � � � �0.0.0.0:*
> LISTEN
> tcp � � � �0 � � �0 127.0.0.1:6010 � � � � � � �0.0.0.0:*
> LISTEN
> tcp � � � �0 � � �0 0.0.0.0:59771 � � � � � � � 0.0.0.0:*
> LISTEN
> tcp � � � �0 � � �0 ::1:5000 � � � � � � � � � �:::*
> �LISTEN
> tcp � � � �0 � � �0 ::1:5100 � � � � � � � � � �:::*
> �LISTEN
> tcp � � � �0 � � �0 :::5900 � � � � � � � � � � :::*
> �LISTEN
> tcp � � � �0 � � �0 :::111 � � � � � � � � � � �:::*
> �LISTEN
> tcp � � � �0 � � �0 :::47345 � � � � � � � � � �:::*
> �LISTEN
> tcp � � � �0 � � �0 ::1:6547 � � � � � � � � � �:::*
> �LISTEN
> tcp � � � �0 � � �0 :::22 � � � � � � � � � � � :::*
> �LISTEN
> tcp � � � �0 � � �0 ::1:6010 � � � � � � � � � �:::*
> �LISTEN
> udp � � � �0 � � �0 0.0.0.0:60550 � � � � � � � 0.0.0.0:*
> udp � � � �0 � � �0 0.0.0.0:6549 � � � � � � � �0.0.0.0:*
> udp � � � �0 � � �0 x.x.x.255:6948 � � � � �0.0.0.0:*
> udp � � � �0 � � �0 x.x.x.56:6948 � � � � � 0.0.0.0:*
> udp � � � �0 � � �0 127.0.0.1:6948 � � � � � � �0.0.0.0:*
> udp � � � �0 � � �0 0.0.0.0:945 � � � � � � � � 0.0.0.0:*
> udp � � � �0 � � �0 0.0.0.0:45151 � � � � � � � 0.0.0.0:*
> udp � � � �0 � � �0 0.0.0.0:5353 � � � � � � � �0.0.0.0:*
> udp � � � �0 � � �0 255.255.255.255:1900 � � � �0.0.0.0:*
> udp � � � �0 � � �0 239.255.255.250:1900 � � � �0.0.0.0:*
> udp � � � �0 � � �0 0.0.0.0:111 � � � � � � � � 0.0.0.0:*
> udp � � � �0 � � �0 x.x.x.56:123 � � � � � �0.0.0.0:*
> udp � � � �0 � � �0 127.0.0.1:123 � � � � � � � 0.0.0.0:*
> udp � � � �0 � � �0 0.0.0.0:123 � � � � � � � � 0.0.0.0:*
> udp � � � �0 � � �0 0.0.0.0:1021 � � � � � � � �0.0.0.0:*
> udp � � � �0 � � �0 ::1:6948 � � � � � � � � � �:::*
> udp � � � �0 � � �0 :::945 � � � � � � � � � � �:::*
> udp � � � �0 � � �0 :::35659 � � � � � � � � � �:::*
> udp � � � �0 � � �0 :::111 � � � � � � � � � � �:::*
> udp � � � �0 � � �0 fe80::201:2eff:fe26:deb:123 :::*
> udp � � � �0 � � �0 ::1:123 � � � � � � � � � � :::*
> udp � � � �0 � � �0 :::123 � � � � � � � � � � �:::*
> Active UNIX domain sockets (only servers)
> Proto RefCnt Flags � � � Type � � � State � � � � I-Node Path
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 17679
> �@/tmp/.ICE-unix/3479
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 10470
> �/var/run/abrt/abrt.socket
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 18959 �/tmp/.esd-0/socket
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 18963
> �/root/.pulse/bbb2e91b19afb1abad1634e90000001c-runtime/native
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 10386 �private/proxywrite
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 10390 �private/smtp
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 10394 �private/relay
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 17921
> �/tmp/orbit-root/linc-d97-0-d3f319b563ca
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 10398 �public/showq
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 10402 �private/error
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 10406 �private/retry
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 10410 �private/discard
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 10414 �private/local
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 17639
> �@/tmp/dbus-jEA3gWyqZA
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 18014
> �/tmp/orbit-root/linc-d8e-0-48129efe897e0
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 10347 �public/cleanup
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 18018
> �/tmp/keyring-qTaAm6/socket.ssh
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 6860
> @/com/ubuntu/upstart
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 9717
> @/var/run/hald/dbus-F5fbsjHLE5
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 10898
> �@/tmp/gdm-greeter-wEDMcBMG
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 10828 �@/tmp/.X11-unix/X0
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 9051
> /var/run/dbus/system_bus_socket
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 17315
> �@/tmp/gdm-session-uXvgbcdU
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 9722
> @/var/run/hald/dbus-vwwfPHRYj4
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 8935
> /var/run/rpcbind.sock
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 10418 �private/virtual
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 10422 �private/lmtp
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 10426 �private/anvil
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 10430 �private/scache
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 21113
> �/var/run/avahi-daemon/socket
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 18217
> �/tmp/orbit-root/linc-dc9-0-58ea911bee890
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 9687
> /var/run/acpid.socket
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 21450
> �/tmp/orbit-root/linc-f5b-0-49454d2e9009f
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 17394
> �/tmp/keyring-qTaAm6/socket
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 18262
> �/tmp/orbit-root/linc-dca-0-35dee0f21d046
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 18405
> �/tmp/orbit-root/linc-dcd-0-747ffaf1671e2
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 19072
> �/tmp/orbit-root/linc-dea-0-286aeba686118
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 18870
> �/tmp/orbit-root/linc-dcb-0-4fe13bfdc168d
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 18924
> �/tmp/orbit-root/linc-dd1-0-6476c38d227ab
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 19021
> �/tmp/orbit-root/linc-df2-0-23484e1a522f1
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 19046
> �/tmp/orbit-root/linc-de5-0-7839f01b6c218
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 19251
> �/tmp/orbit-root/linc-de9-0-1dac4d79baac2
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 19348
> �/tmp/orbit-root/linc-e01-0-36702fb052461
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 19356
> �/tmp/orbit-root/linc-dff-0-3348643355667
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 19378
> �/tmp/orbit-root/linc-ddd-0-16c98c3162f32
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 19386
> �/tmp/orbit-root/linc-de1-0-17c63a336404f
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 19403
> �/tmp/orbit-root/linc-ddb-0-7f46b3d66ae0f
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 19428
> �/tmp/orbit-root/linc-e00-0-7e21a6e385067
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 19634
> �/tmp/orbit-root/linc-e13-0-497ece6a9ae84
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 18020
> �/tmp/keyring-qTaAm6/socket.pkcs11
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 10829 �/tmp/.X11-unix/X0
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 17680 �/tmp/.ICE-unix/3479
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 18044
> �/tmp/orbit-root/linc-db5-0-59922e56969b0
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 10354 �private/tlsmgr
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 10358 �private/rewrite
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 10362 �private/bounce
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 10366 �private/defer
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 10370 �private/trace
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 10374 �private/verify
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 10378 �public/flush
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 10382 �private/proxymap
> unix �2 � � �[ ACC ] � � STREAM � � LISTENING � � 17702
> �/tmp/orbit-root/linc-dae-0-5a1c388f4b7d4
> ------------------------------------------------------------
>
> As it stands -- I do not see any airplay icon on my iphone 4 (current iOS)
> nor iPad 2 (latest iOS). As soon as i turn on my iTunes, it does show me the
> icon on it - although it doesn't work.
>
> Thank you.
>
> Ash
>
>
> --
> http://about.me/adesai

I just realized this: when I do AirPlay (audio only) - it plays okay
(Barring intermittent audio interruptions). However, when I do video
files, my file does not play - no wonder I do not get anything on the
myth. My video position bar remains at the same place. The screen on
my iphone/iPad tells me "it's now playing on your TV" but after 20 sec
if I touch it, the position bar would still be at the start position.
Tried this multiple times. This only happens when doing Myth
AirPlay...

Thanks,

Ash
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users

jyavenard at gmail

May 5, 2012, 10:48 PM

Post #49 of 52 (703 views)
Permalink

Re: How-to AirPlay question [In reply to]

On 4 May 2012 00:36, A Desai <ashu.desai [at] gmail> wrote:
> I just realized this: when I do AirPlay (audio only) - it plays okay
> (Barring intermittent audio interruptions). However, when I do video
> files, my file does not play - no wonder I do not get anything on the
> myth. My video position bar remains at the same place. The screen on
> my iphone/iPad tells me "it's now playing on your TV" but after 20 sec
> if I touch it, the position bar would still be at the start position.
> Tried this multiple times. This only happens when doing Myth
> AirPlay...

Please upgrade to the lastest version of fixes/0.25

All the issues you've seen so far should be fixed now.
You shouldn't experience any audio interruptions anymore and AirPlay
video should work perfectly, including seeking in YouTube application.

AirPlay both audio only and video will now work using iTunes.

If you still have issues, please report back

Regards
Jean-Yves
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users

jaybright at gmail

May 6, 2012, 12:35 AM

Post #50 of 52 (702 views)
Permalink

Re: How-to AirPlay question [In reply to]

On Sun, May 6, 2012 at 3:48 PM, Jean-Yves Avenard <jyavenard [at] gmail> wrote:
> Please upgrade to the lastest version of fixes/0.25
>
> All the issues you've seen so far should be fixed now.
> You shouldn't experience any audio interruptions anymore and AirPlay
> video should work perfectly, including seeking in YouTube application.
>
> AirPlay both audio only and video will now work using iTunes.
>
> If you still have issues, please report back

I'm running the latest 25-fixes via mythbuntu
(v0.25-59-gae7ac79).

Audio generally works well. Playback is occasionally choppy, but i'm
willing to blame that on my 3GS.
Video works fine via the youtube app, or any website that embeds youtube links.

Have never successfully got video to work from Apples "Trailers" app,
or from Sony's "Crackle" video streaming app (free).
In both cases the mythtv box gives the "Please Wait" window for a few
seconds, but never plays through. On the phone the screen changes as
if the video is streaming, and the play icon in the title bar pops on
and off a few times, but nothing comes through.

When i get some time later today I'll see if there are any
mythfrontend logs to go with it.

j

P.S. HUUUUGE thanks for all your development work on this. I wasn't
event expecting the feature and it's become my most used new
functionality in 0.25. Cheers!
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users

jyavenard at gmail

May 6, 2012, 1:32 AM

Post #51 of 52 (264 views)
Permalink

Re: How-to AirPlay question [In reply to]

On 6 May 2012 17:35, Jason Bright <jaybright [at] gmail> wrote:
> On Sun, May 6, 2012 at 3:48 PM, Jean-Yves Avenard <jyavenard [at] gmail> wrote:
> I'm running the latest 25-fixes via mythbuntu
> (v0.25-59-gae7ac79).

Which doesn't include any of the changes I mentioned earlier

>
> Audio generally works well. Playback is occasionally choppy, but i'm
> willing to blame that on my 3GS.

it's not your 3GS, but the AirPlay server

> Video works fine via the youtube app, or any website that embeds youtube links.

except that you can't seek and that the iPhone never properly shows
what is being currently played.
And when you exit playback on the iPhone, playback continues on myth
and you have to manually exit the video

>
> Have never successfully got video to work from Apples "Trailers" app,
> or from Sony's "Crackle" video streaming app (free).
> In both cases the mythtv box gives the "Please Wait" window for a few
> seconds, but never plays through. On the phone the screen changes as
> if the video is streaming, and the play icon in the title bar pops on
> and off a few times, but nothing comes through.
>
> When i get some time later today I'll see if there are any
> mythfrontend logs to go with it.

none of your reports are interesting in regards to what I was
discussing just then...

> P.S. HUUUUGE thanks for all your development work on this. I wasn't
> event expecting the feature and it's become my most used new
> functionality in 0.25. Cheers!

Your thanks should go to Mark Kendall.
He's the one who introduced that feature.

I have rewritten most of it, but he's the one who implemented it first

JY
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users

jyavenard at gmail

May 6, 2012, 1:37 AM

Post #52 of 52 (265 views)
Permalink

Re: How-to AirPlay question [In reply to]

On 6 May 2012 17:35, Jason Bright <jaybright [at] gmail> wrote:
> Have never successfully got video to work from Apples "Trailers" app,
> or from Sony's "Crackle" video streaming app (free).
> In both cases the mythtv box gives the "Please Wait" window for a few
> seconds, but never plays through. On the phone the screen changes as
> if the video is streaming, and the play icon in the title bar pops on
> and off a few times, but nothing comes through.

There are two ways videos can be streamed from an iPhone to an AirPlay
server (usually an Apple TV)
1-By streaming the mp4/m4v video as-is.
Or 2-by using HTTP Live Streaming

mythtv only supports 1.

I hope that 0.26 will support HTTP Live Streaming.
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users

Index | Next | Previous | View Threaded

Interested in having your list archived? Contact Gossamer Threads