proxmox at ssn
Mar 29, 2012, 7:22 AM
Views: 1918
Permalink
|
|
Hardware-recomendation needed
|
|
Hi!
I'm thinking about a DRBD Installation for one of our sites.
The hardware are two identical Sandybridge-Xeon boxes with a dedicated,
direct connection between for DRBD. We're booting of a SSD.
Harddisks are connected by onboard-SATA 6G.
OS is Debian Squeeze using DRBD 3.8.10.
Unfortunatly there's just one 3.5" drive bay available for storage so
raid is not really an option (perhaps using 2 2.5" HDDs mounted with a
2x2.5 to 1x3.5 mounting bracket, but I'm afraid of this setup getting
too hot despite active cooling in the rack.)
So as far as i can see, there are four options available:
1.) a single SATA-Disk, internal metadata: Played around with that while
getting familar with DRBD, lousy performance near to unusable.
2.) a single SATA-Disk, external metadata on a partition of the
Boot-SSD. Any experiences on performance using a setup like this?
3.) a single SATA SSD, internal metadata: I've read about DRBD not
supporting TRIM, so I'm afraid the SSD will not work at full performance
and perhaps die too fast.
4.) a single SATA-Disk, connected to a 3Ware 9650SE Raidcontroller,
using a BBU. Never tried a controller like this with just one disk. How
much RAM do I need on that controller? Is 128MB sufficient (and I know
that the more the better, but how much do we really need?)?
4a.) two 2.5" SATA Disks, mounted in one 3.5" bay using a 9650SE as
well. As said before I'm afraid of getting the HDDs too hot.
Personally I would prefer variant 2 or 3, but I'm not shure about
performance using these setups.
So, what do you think about that options?
regards,
Lukas
--
--------------------------
software security networks
Lukas Gradl <proxmox#ssn.at>
Eduard-Bodem-Gasse 6
A - 6020 Innsbruck
Tel: +43-512-214040-0
Fax: +43-512-214040-21
--------------------------
_______________________________________________
drbd-user mailing list
drbd-user [at] lists
http://lists.linbit.com/mailman/listinfo/drbd-user
|
Hardware-recomendation needed
