sam.howard at officepcsupport
Aug 31, 2008, 12:30 PM
Post #4 of 6
(280 views)
Permalink
|
Oh also, from /proc/drbd (on the host I'm trying the verify command from):
version: 8.0.11 (api:86/proto:86)
GIT-hash: b3fe2bdfd3b9f7c2f923186883eb9e2a0d3a5b1b build by phil[at]mescal,
2008-02-12 11:56:43
2: cs:Connected st:Secondary/Primary ds:UpToDate/UpToDate C r---
ns:0 nr:903984 dw:903984 dr:0 al:0 bm:16 lo:0 pe:0 ua:0 ap:0
resync: used:0/31 hits:308 misses:16 starving:0 dirty:0 changed:16
act_log: used:0/127 hits:0 misses:0 starving:0 dirty:0 changed:0
Now, it says version: 8.0.11 ... does that mean the drbd loaded module is
8.0.11? I'm not sure how that's possible since I built the kernel from
source and then build drbd 8.2.6 from source and installed the module!?!
--Sam
On Sun, Aug 31, 2008 at 12:18 PM, Lars Ellenberg
<lars.ellenberg[at]linbit.com>wrote:
> On Sun, Aug 31, 2008 at 12:05:08AM -0600, Sam Howard wrote:
> > Hi.
> >
> > I am trying to get the online verification to work on 8.2.6, and I added
> the
> > "verify-alg sha1;" to the "syncer" stanza in the "common" section, rsync
> the
> > config files, "drbdadm adjust all" on both nodes, and then:
> >
> > root[at]xen-02:/etc/xen# drbdadm verify webapp02-test-root
> > /dev/drbd6: Failure: (137) (null)
> > Command 'drbdsetup /dev/drbd6 verify' terminated with exit code 10
> >
> > I even tried adding a syncer section to that specific resource rsync,
> > adjust, verify and ... fail.
> >
> > It's failing for any resource I try (in use or not).
> >
> > What should I look at next?
>
> dmesg?
>
>
> --
> : Lars Ellenberg
> : LINBIT HA-Solutions GmbH
> : DRBD(R)/HA support and consulting http://www.linbit.com
>
> DRBD(R) and LINBIT(R) are registered trademarks
> of LINBIT Information Technologies GmbH
> __
> please don't Cc me, but send to list -- I'm subscribed
> _______________________________________________
> drbd-user mailing list
> drbd-user[at]lists.linbit.com
> http://lists.linbit.com/mailman/listinfo/drbd-user
>
|
