Mailing List Archive by Gossamer Threads http://www.gossamer-threads.com/lists/drbd/users/ en-us (c) Gossamer Threads Inc. All rights reserved. 12 Feb 2012 11:28:08 -0800 120 75 23 http://www.gossamer-threads.com/lists/drbd/users/ http://www.gossamer-threads.com/images/lists/rss_logo.jpg Hello, I'm exploring the features of flashcache see: http://www.github.com/facebook/flashcache and I like it's possibilities. Fortunately toracat fr 10 Feb 2012 06:38:37 -0800 http://www.gossamer-threads.com/lists/drbd/users/23141 Hi all, We have this scenario: - A datacenter - 1 Server running kvm VMs: * 1 Openfiler to distribute hard disk to other VMs (stores VMs and VM 09 Feb 2012 10:39:02 -0800 http://www.gossamer-threads.com/lists/drbd/users/23139 Hi All, I've read a few post regarding the possibilities of I/O deadlock if using a loopback mounted file as the storage layer for DRBD. I have a 09 Feb 2012 03:08:17 -0800 http://www.gossamer-threads.com/lists/drbd/users/23135 Hi, I am trying to install DRBD-8.3 on my linux box running 2.6.16.60-0.54.5-smp kernel. I install this drbd package drbd-8.3.9-20.1.x86_64.rpm on my 08 Feb 2012 23:25:50 -0800 http://www.gossamer-threads.com/lists/drbd/users/23132 Hello, Normally DRBD writes changes from device /dev/drbd[x] to a lower level block device (for example /dev/sda) and then submit it to the secondary 06 Feb 2012 23:36:37 -0800 http://www.gossamer-threads.com/lists/drbd/users/23127 DRBD Users, Looking for some advise on performance implications as the number of drbd devices on a host increases. What is the trade off between:- 1. 03 Feb 2012 08:20:21 -0800 http://www.gossamer-threads.com/lists/drbd/users/23122 I have a test system using a linux kernel 3.0.0 with drbd 8.4.1 to try using the new feature with two volumes in one resource. The difficulty I have 03 Feb 2012 02:57:56 -0800 http://www.gossamer-threads.com/lists/drbd/users/23110 Hi, I am trying to bring up DRBD for first time and i am getting sync error. Please help me to get rid of this issue. I followed following steps. 1. 03 Feb 2012 02:15:31 -0800 http://www.gossamer-threads.com/lists/drbd/users/23108 Lars, I didn't want to hijack a different thread so I started a new one. I want to understand better why you said in another thread today not to use 02 Feb 2012 07:27:05 -0800 http://www.gossamer-threads.com/lists/drbd/users/23100 Greetings, I just tried to update to DRBD 8.4.1 (after having issues with 8.3.7 : it would freeze reads while it was writing, see may other thread fo 02 Feb 2012 05:09:40 -0800 http://www.gossamer-threads.com/lists/drbd/users/23091 I have drbd set up to replicate data between two servers. One of these servers unfortunately kernel panic'd and rebooted. After coming back online, th 01 Feb 2012 23:45:21 -0800 http://www.gossamer-threads.com/lists/drbd/users/23080 I apologize for the off topic discussion. If there is a more general list about the dozens of network storage options please point me in the right di 01 Feb 2012 19:24:15 -0800 http://www.gossamer-threads.com/lists/drbd/users/23077 Greetings, I'm doing some experimentation with DRBD and relatively low speed links (~30Mbps), with latency around 34ms. I have this: 1. DRBD versio 01 Feb 2012 17:16:54 -0800 http://www.gossamer-threads.com/lists/drbd/users/23076 Hi Everyone, I have a DRBD performance problem that has got me completely confused. I hoping that someone can help with this one as my other server 01 Feb 2012 17:04:18 -0800 http://www.gossamer-threads.com/lists/drbd/users/23075 All: Fairly new to DRBD, so request patience with framing the question itself. Net Net - want to "use" secondary DRBD storage to start up the databa 01 Feb 2012 15:03:34 -0800 http://www.gossamer-threads.com/lists/drbd/users/23079 Hello, I have asked this question before for drbd 8.4.1 but I couldn't get proper write performance. Currently I downgraded drbd to 8.3.12 but I cann 01 Feb 2012 04:36:44 -0800 http://www.gossamer-threads.com/lists/drbd/users/23054 Hi List. I am having trouble mounting my drbd device on the seccondary node. It mounts fine on the primary but when i try and mount it on the seccon 01 Feb 2012 01:02:13 -0800 http://www.gossamer-threads.com/lists/drbd/users/23048 Hi I've configured DRBD with a view to use it with MySQL (and later on Pacemaker + Corosync) in a 2 nodes primary/secondary (master/slave) setup. On 31 Jan 2012 09:03:51 -0800 http://www.gossamer-threads.com/lists/drbd/users/23045 On Tue, 31 Jan 2012 16:53:55 +0100, Robert.Koeppl@knapp.com wrote: > Hi! > You can force the node into primary by issuing "drbdadm -- > --overwrite-d 31 Jan 2012 08:11:50 -0800 http://www.gossamer-threads.com/lists/drbd/users/23039 Hi! You can force the node into primary by issuing "drbdadm -- --overwrite-data-of-peer primary all". This is quite selfexplanatory regardingits con 31 Jan 2012 07:53:55 -0800 http://www.gossamer-threads.com/lists/drbd/users/23038 Hello, I am working on configuring a 2-node active-passive cluster (hostnames node1 and node2) to provide high-availability to NFS and Samba servers 31 Jan 2012 07:51:46 -0800 http://www.gossamer-threads.com/lists/drbd/users/23037 8.3.12 (git), double primary. I use: rr-conflict call-pri-lost; after-sb-0pri discard-least-changes; after-sb-1pri discard-secondary; # this is for H 31 Jan 2012 07:42:41 -0800 http://www.gossamer-threads.com/lists/drbd/users/23036 Hello, I am having some troubles setting up a stacked resource on drbd 8.4.1 with debian. If I do this exact same process with 8.4.0 it works. I'm t 30 Jan 2012 12:43:56 -0800 http://www.gossamer-threads.com/lists/drbd/users/23025 Hi, please help me on following question: I have 2 drbd node running master/slave under pacemaker, It is running fine, the problem is: After 30 Jan 2012 06:20:24 -0800 http://www.gossamer-threads.com/lists/drbd/users/23024 Hello I have upgraded a system to 8.4.1 kernel module and 8.4.1 userspace utilities. I have written a custom page to show the status. I use this co 30 Jan 2012 03:16:03 -0800 http://www.gossamer-threads.com/lists/drbd/users/23020 Hello, i'm working on adding drbd userspace tools to archlinux distribution. When i load linux 3.2 drbd kernel module, it is recognised as 8.3.11. 3 30 Jan 2012 00:52:57 -0800 http://www.gossamer-threads.com/lists/drbd/users/23018 Hi All, Apologies for the mass email, but it seemed most appropriate to post a followup to all the lists I originally sent the LCA 2012 HA miniconf 29 Jan 2012 19:24:37 -0800 http://www.gossamer-threads.com/lists/drbd/users/23017 Is it possible to change the protocol (from B to C) while the drbd device is open and in use? The way I expect it would work (if it worked at all) is 28 Jan 2012 16:20:38 -0800 http://www.gossamer-threads.com/lists/drbd/users/23013 Hi, Please help me solve my issues. I am trying to bring up DRBD for first time but i am facing following problems. 1. when i start the drbd service 28 Jan 2012 04:26:31 -0800 http://www.gossamer-threads.com/lists/drbd/users/23010 Hello, I have a couple of servers with SSD based raid arrays (capable of writing 550+MB/s to the disks). And a 10Gb/s network (HP NC552SFP network ad 27 Jan 2012 05:35:30 -0800 http://www.gossamer-threads.com/lists/drbd/users/23004 Hi, Is there a built in way to keep snapshots on the same node? Namely, on each (e.g., of the two) nodes Allocate extra space in advance Configure 25 Jan 2012 05:26:50 -0800 http://www.gossamer-threads.com/lists/drbd/users/22998 Hi,Is there a built in way to keep snapshots?Namely, on each (e.g., of the two) nodes Allocate space in advance Configure DRBD to /dev/drbd0 /dev/s 25 Jan 2012 05:18:03 -0800 http://www.gossamer-threads.com/lists/drbd/users/22996 Hello all, I'm running DRBD on two following machines: Scientific Linux 6.1 Intel Xeon E5620 Quad Core 12GB Ram LSI 9280-4i4e + CacheCade 1.0 (CacheC 24 Jan 2012 01:59:07 -0800 http://www.gossamer-threads.com/lists/drbd/users/22983 The DRBD documentation, along with every tutorial I can find, recommends configuring volumes within a resource using sd* names (e.g. /dev/sda). Howeve 23 Jan 2012 11:21:55 -0800 http://www.gossamer-threads.com/lists/drbd/users/22980 I'm seeing something I didn't expect... I was getting very poor results from the following command: time dd if=/dev/zero of=/dev/vg-drbd/test oflag= 23 Jan 2012 05:08:57 -0800 http://www.gossamer-threads.com/lists/drbd/users/22975 I'm in the process of setting up DRBD from scratch for the first time. The first phase of my project is simply to sync one virtual server to another 22 Jan 2012 14:46:04 -0800 http://www.gossamer-threads.com/lists/drbd/users/22972 Hi ; I am using protcol A, I am looking at using the allow-mutilple primaries flag. I am setting up multiple volumes 0 and 1, I tried having volume 0 19 Jan 2012 15:59:00 -0800 http://www.gossamer-threads.com/lists/drbd/users/22965 Is anyone having success using DRBD 8.4.1 on CentOS 6.2, along with Pacemaker 1.1.6 and Corosync 1.4.1? When I force a failover by putting one node i 19 Jan 2012 13:22:13 -0800 http://www.gossamer-threads.com/lists/drbd/users/22961 Hi everyone, First, I would like to express my pleasure using DRBD! Here is my situation: Two-node setup, using cman and pacemaker, don't care about 19 Jan 2012 03:52:03 -0800 http://www.gossamer-threads.com/lists/drbd/users/22956 Hi, Please help me in solving the below mentioned problems. I have installed DRBD in cent0S 6. The rpms I installed are kmod-drbd84-8.4.0-2.el6.elre 19 Jan 2012 03:18:31 -0800 http://www.gossamer-threads.com/lists/drbd/users/22954 Hi We are using drbd alongside with heartbeat and pacemaker in a lot of machines drbd 8.3 pacemaker 1.0.11 heartbeat 3.x We are having serious probl 19 Jan 2012 01:29:28 -0800 http://www.gossamer-threads.com/lists/drbd/users/22950 Hello, I have a primary/secondary node with 2 ressources. When I watch the i/O performance i look some think like this : When I watch the physical d 18 Jan 2012 22:56:00 -0800 http://www.gossamer-threads.com/lists/drbd/users/22948 Hi installing a kvm virtual machine on a drbd disk cause these logs on host machine [2571736.830557] block drbd0: kvm[7083] Concurrent local write d 18 Jan 2012 03:39:56 -0800 http://www.gossamer-threads.com/lists/drbd/users/22945 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Not sure if this is caused by DRBD but I've had a CMAN/DRBD/GFS2 cluster stop doing I/O to the DRBD vo 18 Jan 2012 03:07:55 -0800 http://www.gossamer-threads.com/lists/drbd/users/22944 Hi all, Following patch fixes output information in drbd-overview for resource stacked on top of drbd0 (^^0 is not shown). --- drbd-8.3.12.orig/scri 16 Jan 2012 03:30:01 -0800 http://www.gossamer-threads.com/lists/drbd/users/22926 Hello everyone, I am still currently testing DRBD + OCFS2 in both master nodes and notices that if the networks interface is sort of saturated DRBD d 15 Jan 2012 16:36:38 -0800 http://www.gossamer-threads.com/lists/drbd/users/22920 Hi all, I spoke to Lon, the author of obliterate-peer.sh, about updating/rewriting his script to add a few features. From that, I decided to use pe 14 Jan 2012 21:48:05 -0800 http://www.gossamer-threads.com/lists/drbd/users/22918 Hi, i will create a 4 node replication with DRBD. I read also the documentation. I understand also the configuration of a 3 way replication, but how 13 Jan 2012 03:56:10 -0800 http://www.gossamer-threads.com/lists/drbd/users/22914 Hello, I´m new to DRBD and I think that I have a mess with some concepts and policies. I have setup a two node cluster (of virtual machines 13 Jan 2012 01:59:12 -0800 http://www.gossamer-threads.com/lists/drbd/users/22913 I'm looking to re-write/expand lhh's "obliterate-peer.sh" fence handler that hooks into red hat clusters. In his code is a reference to a mailing list 12 Jan 2012 22:10:47 -0800 http://www.gossamer-threads.com/lists/drbd/users/22911 I've spent the past couple of days trying to get a pair of servers into a state of stability and thought I would try and get down my issues into a pos 11 Jan 2012 08:56:01 -0800 http://www.gossamer-threads.com/lists/drbd/users/22902 Hello everyone, I am studying the Active/Passive iSCSI configuration on the guide: http://www.linbit.com/en/education/tech-guides/highly-available-i 11 Jan 2012 02:08:00 -0800 http://www.gossamer-threads.com/lists/drbd/users/22897 Hello everyone, I am studying the �Active/Passive �iSCSI configuration on the guide: http://www.linbit.com/en/education/tech-guides/highly-avail 10 Jan 2012 06:00:34 -0800 http://www.gossamer-threads.com/lists/drbd/users/22891 Hello all, just to let you know, have managed to get the following configuration to work: CentOS 6.1, DR:BD 8.3, GFS2 with CSMB (clustered SMB with 10 Jan 2012 05:23:18 -0800 http://www.gossamer-threads.com/lists/drbd/users/22890 Hi, During established DRBD+Pacemaker, I met the problem with the following error in node2. I've googled a lot information, but nothing helped. In an 10 Jan 2012 03:40:47 -0800 http://www.gossamer-threads.com/lists/drbd/users/22887 Hello, I am using DRBD (8.3.7) on 2 Ubuntu 10.04 amd64 virtual machines. I have configured 2 DRBD devices, /dev/drbd0 and /dev/drbd1 as follows: 09 Jan 2012 11:03:56 -0800 http://www.gossamer-threads.com/lists/drbd/users/22883 Hello everyone, We are planning to implement the Active/Active iSCSI setup: http://www.linbit.com/fileadmin/tech-guides/ha-iscsi.pdf The plan is to 09 Jan 2012 07:43:42 -0800 http://www.gossamer-threads.com/lists/drbd/users/22878 Hi guys, I have a question: If I use a partition with 1 TB, I should create a 33 MB metadata partition. What if I resize the 1TB partition ? Now th 09 Jan 2012 04:20:18 -0800 http://www.gossamer-threads.com/lists/drbd/users/22877 I am currently using Version: 8.3.9 and some how ended up having two secondary. drbd0 is being marked as read only. Is there any way i can recover fro 08 Jan 2012 19:36:59 -0800 http://www.gossamer-threads.com/lists/drbd/users/22875 Hello, We have two Dell 1425 servers running CentOS 5.4, with RAID5, 3 disks in each one, and drbd 8.3 between them. We see a disk failure on _all_ 08 Jan 2012 06:34:29 -0800 http://www.gossamer-threads.com/lists/drbd/users/22870 Hello everyone, I am new on the forum and have a newbie question. What is the easiest distribution for a DRBD+iSCSI Multipathing+Heartbeat Single-Pri 07 Jan 2012 04:21:23 -0800 http://www.gossamer-threads.com/lists/drbd/users/22865 [.This is kind of a re-post, as my previous post as a response in another thread might not have been noticed by most readers.] I had some opportuni 05 Jan 2012 09:22:53 -0800 http://www.gossamer-threads.com/lists/drbd/users/22854 I have a two-node active/passive cluster, with DRBD controlled by corosync/pacemaker. All storage is based on LVM. --------------------------------- 04 Jan 2012 18:13:33 -0800 http://www.gossamer-threads.com/lists/drbd/users/22843 Is it possible to have an active active configuration using stacked resources? This wasn't clear to me in the documentation. Something like, Node 04 Jan 2012 15:17:27 -0800 http://www.gossamer-threads.com/lists/drbd/users/22842 I'll give the technical details in a moment, but I thought I'd start with a description of the problem. I have a two-node active/passive cluster, wit 04 Jan 2012 12:10:09 -0800 http://www.gossamer-threads.com/lists/drbd/users/22836 Hi, DRBD 8.3.12 on CentOS 6.2; SDP from kernel-ib-1.5.3, built locally from ofa_kernel-1.5.3-OFED srpm. DRBD resource config is as follows: resource 03 Jan 2012 11:16:15 -0800 http://www.gossamer-threads.com/lists/drbd/users/22829 Hi all, I'm happy to announce a new tutorial! https://alteeve.com/w/2-Node_Red_Hat_KVM_Cluster_Tutorial This tutorial walks a user through the 03 Jan 2012 06:27:12 -0800 http://www.gossamer-threads.com/lists/drbd/users/22828 Our local heartbeat/drbd cluster has been moody for the last few weeks, but I suddenly noticed a drbd2 volume being marked as completely out-of-date 02 Jan 2012 14:45:19 -0800 http://www.gossamer-threads.com/lists/drbd/users/22823 Hi, I'm building a very low cost virtualization server for a Non Profit organization using 2 HP workstations (500€ each) (8GB Ram, 1.5TB, QuadCore 01 Jan 2012 09:04:18 -0800 http://www.gossamer-threads.com/lists/drbd/users/22820 On 12/27/2011 11:26 PM, Andreas Kurz wrote: >>> * Optional load balancing for read requests: new keyword "read-balance" > should be: "read-balancin 30 Dec 2011 09:43:20 -0800 http://www.gossamer-threads.com/lists/drbd/users/22819 Hi, I would like to implement a new DRBD solution to one customer. The problem is that I don't know what hardware to acquire for an enterprise archit 28 Dec 2011 03:39:47 -0800 http://www.gossamer-threads.com/lists/drbd/users/22806 Hi! At the moment, I am thinking about a new system using DRBD (Xenserver with VMs using databases). To get higher throughput and lower latencies, I 27 Dec 2011 04:54:22 -0800 http://www.gossamer-threads.com/lists/drbd/users/22801 Hi, Please help me! I have my DRBD setup with two nodes, using software raid for storage as /dev/md0. I have followed these instructions http://w 26 Dec 2011 13:56:15 -0800 http://www.gossamer-threads.com/lists/drbd/users/22800 Hi all,may I asking how to shutdown procedure server running drbd.I mean primary server,because I got split brain but now is solved.many thanks Powere 26 Dec 2011 02:32:42 -0800 http://www.gossamer-threads.com/lists/drbd/users/22799 drbd ver. 8.4.1 abstract from user-guide 10.5. Adding a new DRBD volume to an existing Volume Group Make sure your DRBD configuration is identical a 25 Dec 2011 04:52:42 -0800 http://www.gossamer-threads.com/lists/drbd/users/22798 Hi all, We are using drbd 8.3.11-0.3.1 on a dual Xen install (on SLES11 SP1) and we have a strange problem with the init script of drbd. Each time 22 Dec 2011 18:41:07 -0800 http://www.gossamer-threads.com/lists/drbd/users/22795 Hi all, I'm trying to set up HA with DRBD and Heartbeat on two identical RedHat VM's hosted on Windows VirtualBox. The details about the server(s) dr 21 Dec 2011 21:25:24 -0800 http://www.gossamer-threads.com/lists/drbd/users/22790 Hi, I am currently working on a server that mirrors certain folders in it's /etc/ folder through symlinks. This is causing dpkg to hang on the follow 20 Dec 2011 07:09:33 -0800 http://www.gossamer-threads.com/lists/drbd/users/22789 Hi fellows, Once again I am proud to announce a new release: 8.4.1 I hope that we have the majority of regressions that where introduced with the 8. 20 Dec 2011 06:37:30 -0800 http://www.gossamer-threads.com/lists/drbd/users/22787 Hi fellows, Once again I am proud to announce a new release: 8.4.1 I hope that we have the majority of regressions that where introduced with the 8. 20 Dec 2011 06:37:30 -0800 http://www.gossamer-threads.com/lists/drbd/users/22793 You need to promote this node to primary. drbdadm -- --overwrite-data-of-peer primary r0 should do the trick. Also you will need some sort of clusterw 20 Dec 2011 01:55:15 -0800 http://www.gossamer-threads.com/lists/drbd/users/22784 Hi: I'm running the following: drbd 8.4.0 centos 6.0 gfs2 2 node cluster /proc/drbd: GIT-hash: 28753f559ab51b549d16bcf487fe625d5919c49c build by 19 Dec 2011 18:40:42 -0800 http://www.gossamer-threads.com/lists/drbd/users/22808 I just started playing around with drbd, so sorry if I'm still not familiar with concepts and tools of drbd. After installation of the first pair of 19 Dec 2011 09:23:49 -0800 http://www.gossamer-threads.com/lists/drbd/users/22783 Hi, My application was successfully running on 32-Bit but when i am porting it to 64-Bit. It always generates the core files. The core files seems t 19 Dec 2011 06:22:01 -0800 http://www.gossamer-threads.com/lists/drbd/users/22775 I am having problems with drbd locking up randomly. I am using CentOS 5.7 on a HP DL385 G5 x86_64 server. I am using gvfs, ctdb and samba 3.6. Here 18 Dec 2011 08:02:21 -0800 http://www.gossamer-threads.com/lists/drbd/users/22769 Hi, I think most of the problems were already discussed, so just few comments here. First, dm-crypt is not tested in cluster scenarios at all, you h 16 Dec 2011 01:22:00 -0800 http://www.gossamer-threads.com/lists/drbd/users/22767 Hi all, we've been using drbd for about six month now, and so far everything is working pretty well. Our setup is like this with two identical machin 15 Dec 2011 04:19:35 -0800 http://www.gossamer-threads.com/lists/drbd/users/22754 Hi all, can someone explain what happened here. Secondary node disconnected and did not connect back (became Standalone) . Also there was no email n 14 Dec 2011 04:50:56 -0800 http://www.gossamer-threads.com/lists/drbd/users/22752 Hi, Relative to rc1 one ugly bug in the read load balancing code was discovered. Local retry of read requests that where scheduled to the peer b 13 Dec 2011 15:04:45 -0800 http://www.gossamer-threads.com/lists/drbd/users/22745 I have somewhat of an emergency on my hands, and am hoping the community may have some insight. One of the primary fiber rings on my campus will be d 13 Dec 2011 13:50:07 -0800 http://www.gossamer-threads.com/lists/drbd/users/22743 Hi, we have a postgres vm, currently running on a xen host, and want to migrate it to drdb. we are now thinking about installing the new vm on a Fus 13 Dec 2011 08:30:42 -0800 http://www.gossamer-threads.com/lists/drbd/users/22750 On Fri, Dec 09, 2011 at 12:57:38AM +0000, Newman, Brad wrote: > I'm using DRBD 8.4.0 with Heartbeat and Pacemaker on CentOS 6. > I've encountered an i 13 Dec 2011 03:51:46 -0800 http://www.gossamer-threads.com/lists/drbd/users/22733 "in dual primary mode, only protocol C is allowed. cluster file system deals with cache coherence, DRBD has to deal with storage coherence. you canno 12 Dec 2011 20:35:01 -0800 http://www.gossamer-threads.com/lists/drbd/users/22730 Hi, I am interested in having a highly available network file system and I'd like to be able to support xen migration as well as file system 12 Dec 2011 11:15:52 -0800 http://www.gossamer-threads.com/lists/drbd/users/22727 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, does someone of you guys know a repository for CentOS 6/64bit which hosts drbd? I checked rpmforg 12 Dec 2011 06:35:56 -0800 http://www.gossamer-threads.com/lists/drbd/users/22725 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I have a two-node pri/sec setup here. Currently the secondary is offline and I when it'll go onlin 11 Dec 2011 23:22:10 -0800 http://www.gossamer-threads.com/lists/drbd/users/22714 +DRBD group, which seems to have many linux disk gurus The problem: MD seems to refuse submitting read IO when page flush submits write io. I'm comp 09 Dec 2011 22:16:02 -0800 http://www.gossamer-threads.com/lists/drbd/users/22713 Hi, is it possible afterwards to have an logical volume to be mirrored to a second machine by DRDB? Our backups are stored on disk and I'm thinking 09 Dec 2011 03:30:30 -0800 http://www.gossamer-threads.com/lists/drbd/users/22703 Hi Everyone, Anyone out there using a Dell Poweredge C2100 with the 24 2.5" HDD backplane? I'm curious to know a little about the backplane, mainly 08 Dec 2011 10:29:47 -0800 http://www.gossamer-threads.com/lists/drbd/users/22701 Hi, I am trying to follow the linbit replicated NFS howto and, well, I must be dumb, because it flat out does not work for me. No distro I h 07 Dec 2011 08:45:41 -0800 http://www.gossamer-threads.com/lists/drbd/users/22695