consoleteam at gmail
Oct 27, 2011, 4:29 PM
Post #2 of 2
(742 views)
Permalink
|
I'm happy to help (I've got SLC 16, 32, 48's, and ACS2000s').
If you want to share a bit of your conserver.cf file (the "defailts" at
the top, and the first 5-10 lines of a working and a non-working console
server) should help get us started.
I'll start... I use a lot of comments, for the folks who will come after
me... I'm guessing it will be an issue in the port increments.
### define some terminal server specifics
# we set portbase and portinc so we can reference the ports in a
# physical representation and let conserver do the math to figure
# out the actual socket address
default cisco { type host; portbase 2000; portinc 1; }
## cicso use port 2000 for telnet, 4000 for extended telnet, 6000 for raw
default cyclades { type host; portbase 7000; portinc 1; }
## cyclades use port 7000 for telnet sessions
default lantronix { type host; portbase 2000; portinc 1; }
## the new lantronix (SLC units) can use
#### 2000.. for telnet, 3000.. for ssh, and 4000.. for raw
## the old lantronix (ETS32PR units in the labs) use
#### 2000.. for telnet, 3000.. for raw
default Opengear { type host; portbase 6000; portinc 1; }
## Tested with the SD4002, CM4008, ACM-5004
### 2000.. for telnet, 3000.. for ssh, and 4000.. for Raw,
### 6000.. for Unauthenticated Telnet
And, for a console server;
default tvists5-3 {
include lantronix;
host tvists5-3;
}
#console unused-ts5-3-1 { include tvists5-3; port 1; } # this is the
console
console unused-ts5-3-2 { include tvists5-3; port 2; }
console unused-ts5-3-3 { include tvists5-3; port 3; }
default tvists6-20 {
include cyclades;
host tvists6-20;
}
console teama23 { include tvists6-20; port 1;}
console teama24 { include tvists6-20; port 2;}
consoleteama25 { include tvists6-20; port 3;}
Let me know if this helps.
-Z-
On Thu, Oct 27, 2011 at 4:15 PM, Randall Chuck <randall.a.chuck [at] gmail>wrote:
> Hi,
> I've got conserver running with Lantronix SLC NTS. We're now getting some
> Avocent Cyclades ACS6000s.
> I don't get any response when connecting to these new NTSs via conserver.
> telneting direct to the cyclades-host port-num works
>
> Anybody have this setup and can give me a clue?
>
> _______________________________________________
> users mailing list
> users [at] conserver
> https://www.conserver.com/mailman/listinfo/users
>
--
ConsoleTeam - Support and training services for Conserver users.
www.conserver.com/consoles/
consoleteam.blogspot.com
- - - - - - - -
www.ncry.org
www.d4tm.org
www.hackerdojo.com
|
