rdeberry at gmail
Mar 30, 2006, 6:17 PM
Views: 2679
Permalink
|
Thanks for the reply. I am trying to emulate a Cisco 2511 or equivalent.
Searching through the mailing-lists I found ser2net and it is working like I
need for my situation.
On 3/30/06, Bryan Stansell <bryan [at] conserver> wrote:
>
> On Thu, Mar 30, 2006 at 08:44:08PM -0500, Ryan DeBerry wrote:
> > I want to be able to telnet to the conserver and use it in that aspect.
>
> why? the console client can run just about anywhere.
>
> > I can telnet to port 50000 and connect to a console, however there is no
> > interaction after you connect a console.
>
> see https://www.conserver.com/pipermail/users/2006-March/msg00033.html,
> sounds like the same issue.
>
> > Is this a feature that is supported currently or am I stretching
> it? Other
> > than that I can connect and interact with console from the local server.
>
> well, it's supported in that as long as you chat using the protocol it's
> expecting, yes.
>
> oh, and going directly to the higher-numbered port instead of the -p arg
> and then using the protocol to find the console may not always work...it
> probably will, depending on what the machine is doing, but it's not
> guaranteed (and if you edit the config and send a HUP, all bets are
> off).
>
> i'd certainly like to know why you're trying to avoid the client, 'cause
> if something is lacking, it might be possible to add an enhancement.
> but i can imagine edge cases that would require it...
>
> good luck!
>
> Bryan
> _______________________________________________
> users mailing list
> users [at] conserver
> https://www.conserver.com/mailman/listinfo/users
>
|
