bryan at conserver
Mar 30, 2006, 6:05 PM
Views: 2678
Permalink
|
On Thu, Mar 30, 2006 at 08:44:08PM -0500, Ryan DeBerry wrote:
> I want to be able to telnet to the conserver and use it in that aspect.
why? the console client can run just about anywhere.
> I can telnet to port 50000 and connect to a console, however there is no
> interaction after you connect a console.
see https://www.conserver.com/pipermail/users/2006-March/msg00033.html,
sounds like the same issue.
> Is this a feature that is supported currently or am I stretching it? Other
> than that I can connect and interact with console from the local server.
well, it's supported in that as long as you chat using the protocol it's
expecting, yes.
oh, and going directly to the higher-numbered port instead of the -p arg
and then using the protocol to find the console may not always work...it
probably will, depending on what the machine is doing, but it's not
guaranteed (and if you edit the config and send a HUP, all bets are
off).
i'd certainly like to know why you're trying to avoid the client, 'cause
if something is lacking, it might be possible to add an enhancement.
but i can imagine edge cases that would require it...
good luck!
Bryan
_______________________________________________
users mailing list
users [at] conserver
https://www.conserver.com/mailman/listinfo/users
|
Re: Telnet to conserver