Login | Register For Free | Help
Search for: (Advanced)

Mailing List Archive: Cisco: VOIP

Bearer Capability not implemented

 

 

Cisco voip RSS feed   Index | Next | Previous | View Threaded


MohitS at starcomms

Oct 24, 2008, 8:10 AM

Post #1 of 3 (11125 views)
Permalink
Bearer Capability not implemented

Hello Friends,



I am using a Cisco 5300 gateway. ISDN Out Calls get released within a
second. When running a q931 debug, I get cause code as Bearer capability
not implemented. Below is the debug



Oct 24 15:28:34.161 GMT: ISDN Se3/0:15 Q931: isdn_parser_map_lkup:
overriding plan/type for 15141234567, isdn/international to
unknown/unknown

Oct 24 15:28:34.161 GMT: ISDN Se3/0:15 Q931: isdn_parser_map_lkup:
overriding plan/type for 2347028000709, isdn/international to
unknown/unknown

Oct 24 15:28:34.161 GMT: ISDN Se3/0:15 Q931: isdn_parser_map_lkup:
overriding plan/type for 15141234567, data/national to unknown/unknown

Oct 24 15:28:34.161 GMT: ISDN Se3/0:15 Q931: isdn_parser_map_lkup:
overriding plan/type for 2347028000709, isdn/international to
unknown/unknown

Oct 24 15:28:34.161 GMT: ISDN Se3/0:15 Q931: TX -> SETUP pd = 8 callref
= 0x0005

Bearer Capability i = 0x8090A3

Standard = CCITT

Transer Capability = Speech

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0xA98381

Exclusive, Channel 1

Calling Party Number i = 0x00A3, '15141234567'

Plan:Unknown, Type:Unknown

Called Party Number i = 0x80, '2347028000709'

Plan:Unknown, Type:Unknown

Oct 24 15:28:34.189 GMT: ISDN Se3/0:15 Q931: RX <- CALL_PROC pd = 8
callref = 0x8005

Channel ID i = 0xA98381

Exclusive, Channel 1

Progress Ind i = 0x8288 - In-band info or appropriate now
available

Oct 24 15:28:41.037 GMT: ISDN Se3/0:15 Q931: RX <- ALERTING pd = 8
callref = 0x8005

Progress Ind i = 0x8288 - In-band info or appropriate now
available

Oct 24 15:28:45.741 GMT: ISDN Se3/0:15 Q931: RX <- CONNECT pd = 8
callref = 0x8005

Progress Ind i = 0x8282 - Destination address is non-ISDN

Date/Time i = 0x080A180F1C2B

Oct 24 15:28:45.741 GMT: ISDN Se3/0:15 Q931: TX -> CONNECT_ACK pd = 8
callref = 0x0005

Oct 24 15:28:46.585 GMT: ISDN Se3/0:15 Q931: TX -> DISCONNECT pd = 8
callref = 0x0005

Cause i = 0x80C1 - Bearer capability not implemented

Oct 24 15:28:46.597 GMT: ISDN Se3/0:15 Q931: RX <- RELEASE pd = 8
callref = 0x8005

Oct 24 15:28:46.597 GMT: ISDN Se3/0:15 Q931: TX -> RELEASE_COMP pd = 8
callref = 0x0005







Please help.



br

Mohit





DISCLAIMER: The information contained in this message (including any attachments) is confidential and may be privileged. If you have received it by mistake please notify the sender by return e-mail and permanently delete this message and any attachments from your system. Any form of dissemination, use, review, distribution, printing or copying of this message in whole or in part is strictly prohibited if you are not the intended recipient of this e-mail. Please note that e-mails are susceptible to change. STARCOMMS PLC shall not be liable for the improper or incomplete transmission of the information contained in this communication nor for any delay in its receipt or damage to your system. STARCOMMS PLC does not guarantee that the integrity of this communication has been maintained or that this communication is free of viruses, interceptions or interferences. STARCOMMS PLC reserves the right to monitor all e-mail communications, whether related to the business of STARCOMMS or not, through its internal or external networks.


Andrius-conf at elsis

Oct 24, 2008, 8:12 AM

Post #2 of 3 (10991 views)
Permalink
Re: Bearer Capability not implemented [In reply to]

If you are using video endpoints, try overwriting bearer cap on
voice-port with "bearer-cap Speech".

Andrius


Mohit Saxena wrote:
> Hello Friends,
>
>
>
> I am using a Cisco 5300 gateway. ISDN Out Calls get released within a
> second. When running a q931 debug, I get cause code as Bearer capability
> not implemented. Below is the debug
>
>
>
> Oct 24 15:28:34.161 GMT: ISDN Se3/0:15 Q931: isdn_parser_map_lkup:
> overriding plan/type for 15141234567, isdn/international to unknown/unknown
>
> Oct 24 15:28:34.161 GMT: ISDN Se3/0:15 Q931: isdn_parser_map_lkup:
> overriding plan/type for 2347028000709, isdn/international to
> unknown/unknown
>
> Oct 24 15:28:34.161 GMT: ISDN Se3/0:15 Q931: isdn_parser_map_lkup:
> overriding plan/type for 15141234567, data/national to unknown/unknown
>
> Oct 24 15:28:34.161 GMT: ISDN Se3/0:15 Q931: isdn_parser_map_lkup:
> overriding plan/type for 2347028000709, isdn/international to
> unknown/unknown
>
> Oct 24 15:28:34.161 GMT: ISDN Se3/0:15 Q931: TX -> SETUP pd = 8 callref
> = 0x0005
>
> Bearer Capability i = 0x8090A3
>
> Standard = CCITT
>
> Transer Capability = Speech
>
> Transfer Mode = Circuit
>
> Transfer Rate = 64 kbit/s
>
> Channel ID i = 0xA98381
>
> Exclusive, Channel 1
>
> Calling Party Number i = 0x00A3, '15141234567'
>
> Plan:Unknown, Type:Unknown
>
> Called Party Number i = 0x80, '2347028000709'
>
> Plan:Unknown, Type:Unknown
>
> Oct 24 15:28:34.189 GMT: ISDN Se3/0:15 Q931: RX <- CALL_PROC pd = 8
> callref = 0x8005
>
> Channel ID i = 0xA98381
>
> Exclusive, Channel 1
>
> Progress Ind i = 0x8288 - In-band info or appropriate now available
>
> Oct 24 15:28:41.037 GMT: ISDN Se3/0:15 Q931: RX <- ALERTING pd = 8
> callref = 0x8005
>
> Progress Ind i = 0x8288 - In-band info or appropriate now available
>
> Oct 24 15:28:45.741 GMT: ISDN Se3/0:15 Q931: RX <- CONNECT pd = 8
> callref = 0x8005
>
> Progress Ind i = 0x8282 - Destination address is non-ISDN
>
> Date/Time i = 0x080A180F1C2B
>
> Oct 24 15:28:45.741 GMT: ISDN Se3/0:15 Q931: TX -> CONNECT_ACK pd = 8
> callref = 0x0005
>
> Oct 24 15:28:46.585 GMT: ISDN Se3/0:15 Q931: TX -> DISCONNECT pd = 8
> callref = 0x0005
>
> Cause i = 0x80C1 *- Bearer capability not implemented*
>
> Oct 24 15:28:46.597 GMT: ISDN Se3/0:15 Q931: RX <- RELEASE pd = 8
> callref = 0x8005
>
> Oct 24 15:28:46.597 GMT: ISDN Se3/0:15 Q931: TX -> RELEASE_COMP pd = 8
> callref = 0x0005
>
>
>
>
>
>
>
> Please help.
>
>
>
> br
>
> *Mohit *
>
>
>
> ------------------------------------------------------------------------
> DISCLAIMER: The information contained in this message (including any
> attachments) is confidential and may be privileged. If you have received
> it by mistake please notify the sender by return e-mail and permanently
> delete this message and any attachments from your system. Any form of
> dissemination, use, review, distribution, printing or copying of this
> message in whole or in part is strictly prohibited if you are not the
> intended recipient of this e-mail. Please note that e-mails are
> susceptible to change. STARCOMMS PLC shall not be liable for the
> improper or incomplete transmission of the information contained in this
> communication nor for any delay in its receipt or damage to your system.
> STARCOMMS PLC does not guarantee that the integrity of this
> communication has been maintained or that this communication is free of
> viruses, interceptions or interferences. STARCOMMS PLC reserves the
> right to monitor all e-mail communications, whether related to the
> business of STARCOMMS or not, through its internal or external networks.
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip [at] puck
> https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip


moataz_mmdh at yahoo

Oct 28, 2008, 2:25 PM

Post #3 of 3 (10974 views)
Permalink
Re: Bearer Capability not implemented [In reply to]

hi all
have you try to make a translation rule to map the TYPE and PLAN from unknow to national or vice versa , i can see from the debug u attached that your call could not be completed and the bearer capabilities is not implemented due to this reason , the telco switch reject your request to make a call ( probably it's similar ti invalid information elements in ISDN messages)


--- On Fri, 10/24/08, Andrius Kislas <Andrius-conf [at] elsis> wrote:
From: Andrius Kislas <Andrius-conf [at] elsis>
Subject: Re: [cisco-voip] Bearer Capability not implemented
To: "Mohit Saxena" <MohitS [at] starcomms>
Cc: cisco-voip [at] puck
Date: Friday, October 24, 2008, 11:12 AM

If you are using video endpoints, try overwriting bearer cap on
voice-port with "bearer-cap Speech".

Andrius


Mohit Saxena wrote:
> Hello Friends,
>
>
>
> I am using a Cisco 5300 gateway. ISDN Out Calls get released within a
> second. When running a q931 debug, I get cause code as Bearer capability
> not implemented. Below is the debug
>
>
>
> Oct 24 15:28:34.161 GMT: ISDN Se3/0:15 Q931: isdn_parser_map_lkup:
> overriding plan/type for 15141234567, isdn/international to
unknown/unknown
>
> Oct 24 15:28:34.161 GMT: ISDN Se3/0:15 Q931: isdn_parser_map_lkup:
> overriding plan/type for 2347028000709, isdn/international to
> unknown/unknown
>
> Oct 24 15:28:34.161 GMT: ISDN Se3/0:15 Q931: isdn_parser_map_lkup:
> overriding plan/type for 15141234567, data/national to unknown/unknown
>
> Oct 24 15:28:34.161 GMT: ISDN Se3/0:15 Q931: isdn_parser_map_lkup:
> overriding plan/type for 2347028000709, isdn/international to
> unknown/unknown
>
> Oct 24 15:28:34.161 GMT: ISDN Se3/0:15 Q931: TX -> SETUP pd = 8
callref
> = 0x0005
>
> Bearer Capability i = 0x8090A3
>
> Standard = CCITT
>
> Transer Capability = Speech
>
> Transfer Mode = Circuit
>
> Transfer Rate = 64 kbit/s
>
> Channel ID i = 0xA98381
>
> Exclusive, Channel 1
>
> Calling Party Number i = 0x00A3, '15141234567'
>
> Plan:Unknown, Type:Unknown
>
> Called Party Number i = 0x80, '2347028000709'
>
> Plan:Unknown, Type:Unknown
>
> Oct 24 15:28:34.189 GMT: ISDN Se3/0:15 Q931: RX <- CALL_PROC pd = 8
> callref = 0x8005
>
> Channel ID i = 0xA98381
>
> Exclusive, Channel 1
>
> Progress Ind i = 0x8288 - In-band info or appropriate now
available
>
> Oct 24 15:28:41.037 GMT: ISDN Se3/0:15 Q931: RX <- ALERTING pd = 8
> callref = 0x8005
>
> Progress Ind i = 0x8288 - In-band info or appropriate now
available
>
> Oct 24 15:28:45.741 GMT: ISDN Se3/0:15 Q931: RX <- CONNECT pd = 8
> callref = 0x8005
>
> Progress Ind i = 0x8282 - Destination address is non-ISDN
>
> Date/Time i = 0x080A180F1C2B
>
> Oct 24 15:28:45.741 GMT: ISDN Se3/0:15 Q931: TX -> CONNECT_ACK pd = 8
> callref = 0x0005
>
> Oct 24 15:28:46.585 GMT: ISDN Se3/0:15 Q931: TX -> DISCONNECT pd = 8
> callref = 0x0005
>
> Cause i = 0x80C1 *- Bearer capability not implemented*
>
> Oct 24 15:28:46.597 GMT: ISDN Se3/0:15 Q931: RX <- RELEASE pd = 8
> callref = 0x8005
>
> Oct 24 15:28:46.597 GMT: ISDN Se3/0:15 Q931: TX -> RELEASE_COMP pd = 8

> callref = 0x0005
>
>
>
>
>
>
>
> Please help.
>
>
>
> br
>
> *Mohit *
>
>
>
> ------------------------------------------------------------------------
> DISCLAIMER: The information contained in this message (including any
> attachments) is confidential and may be privileged. If you have received
> it by mistake please notify the sender by return e-mail and permanently
> delete this message and any attachments from your system. Any form of
> dissemination, use, review, distribution, printing or copying of this
> message in whole or in part is strictly prohibited if you are not the
> intended recipient of this e-mail. Please note that e-mails are
> susceptible to change. STARCOMMS PLC shall not be liable for the
> improper or incomplete transmission of the information contained in this
> communication nor for any delay in its receipt or damage to your system.
> STARCOMMS PLC does not guarantee that the integrity of this
> communication has been maintained or that this communication is free of
> viruses, interceptions or interferences. STARCOMMS PLC reserves the
> right to monitor all e-mail communications, whether related to the
> business of STARCOMMS or not, through its internal or external networks.
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip [at] puck
> https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip [at] puck
https://puck.nether.net/mailman/listinfo/cisco-voip

Cisco voip RSS feed   Index | Next | Previous | View Threaded
 
 


Interested in having your list archived? Contact Gossamer Threads
 
  Web Applications & Managed Hosting Powered by Gossamer Threads Inc.