jbuchanan at ctiusa
Jul 4, 2008, 7:43 PM
Post #3 of 3
(981 views)
Permalink
|
Change it to the old address then change it inside the system.
From: cisco-voip-bounces[at]puck.nether.net
[mailto:cisco-voip-bounces[at]puck.nether.net] On Behalf Of Jason Aarons
(US)
Sent: Friday, July 04, 2008 7:18 PM
To: Aman Chugh; cisco-voip[at]puck.nether.net
Subject: Re: [cisco-voip] Database communication error
I followed the steps on CCO, had same issue, seems a reboot or waiting a
few minutes caused the problem to go away. System isn't in production
yet so I can't say their are no issues. But it was a single server
CCM-6.1.2-BE.
________________________________
From: cisco-voip-bounces[at]puck.nether.net on behalf of Aman Chugh
Sent: Fri 7/4/2008 11:43 AM
To: cisco-voip[at]puck.nether.net
Subject: [cisco-voip] Database communication error
I have changed the IP address of 6.1.2 server from CLI , without
changing it under system - server on the admin page. Now if i try to log
into the admin page I get the database communication error, I see that
the Cisco DB is not running when I do utils service list , is there any
way to recover without a reinstall of ccm.
TIA
Aman
________________________________
Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee,
you are hereby notified that you have received this communication in
error and that any use or reproduction of this email or its contents is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify us immediately by replying to this
message and deleting it from your computer. Thank you.
|
