
dschulz at skyline-ats
May 21, 2008, 5:38 PM
Post #5 of 5
(539 views)
Permalink
|
Carlos - If the 4 CCMs are separated across the WAN, you have to insure that you have the correct QoS set up between these sites. According to the Cisco SRND document, you will want to make sure that you have no more than 40mSec round-trip delay between any two CMs. And, at least 900k of bandwidth for every 10,000BHCAs. This is needed for the communication between CMs (the SDL) and the replication from publisher to subs. Not having this, will cause the condition that you described. Hope this helps! Dave _____ From: Carlos Zavala [mailto:czavala [at] satec] Sent: Wednesday, May 21, 2008 2:58 AM To: dschulz Cc: 'Scott Voll'; 'cisco voip' Subject: Re: [cisco-voip] Add Subscriber in Cluster Hi, thank you for your answers, The CCM is the version 4.1, we have approximately 1000 phones between local and remote phones and the idea was distributed in 4 CCM to balance the load. Thanks Carlos dschulz wrote: You'll want to look at the platform that you are using, the number of phones and the deployment (are you separating CMs across the WAN). Any of the following could cause a performance issue, like you are experiencing. Dave _____ From: cisco-voip-bounces [at] puck [mailto:cisco-voip-bounces [at] puck] On Behalf Of Scott Voll Sent: Tuesday, May 20, 2008 3:44 PM To: Carlos Zavala Cc: cisco voip Subject: Re: [cisco-voip] Add Subscriber in Cluster CM Ver? Check sync of DBs Scott On Mon, May 19, 2008 at 7:50 AM, Carlos Zavala <czavala [at] satec> wrote: Hi We have added two CCM in a Cluster in which there were another two, I now have 4 CCM (1 publisher and 3 Subscribers), when active services, the calls between phones there is a delay to establish time of the call and the system is very slow. Any suggestions Thanks. Carlos _______________________________________________ cisco-voip mailing list cisco-voip [at] puck https://puck.nether.net/mailman/listinfo/cisco-voip -- Carlos Zavala -------------------- Departamento Tecnico czavala [at] satec GRUPO SATEC - Barcelona Joan d'Austria, 39-47. 5-B 08005 Barcelona Tel: (+34) 93 2241000 Fax: (+34) 93 2241001 http://www.satec.es
|